Import trade restrictions for 8419000000 80
Duties for more codes with a free account
You have looked at the duties of 10 codes today. Sign up free to see duties, measures and history for every code.
Preferential rules of origin for 8419000000
What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algeria
EU-Egypt Association Agreement · Egypt
EU-Jordan Association Agreement · Jordan
EU-Morocco Association Agreement · Morocco
EU-Tunisia Association Agreement · Tunisia
Machines for wood, paper pulp, paper and paperboard industries / or: Manufacture in which: the value of all the materials used does not exceed 40 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
EU-Canada CETA · Canada
A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product.
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof, except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 60 per cent of the ex-works price of the product
EPA CARIFORUM
Machines for wood, paper pulp and paperboard industries / or: Manufacture: – in which the value of all the materials used does not exceed 40 % of the ex-works price of the product; – where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya
Machines for wood, paper pulp and paperboard industries / or: Manufacture: in which the value of all the materials used does not exceed 40 % of the ex-works price of the product; where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU-Japan EPA · Japan
CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).
EU-Korea FTA · South Korea
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Lebanon Association Agreement · Lebanon
Machines for wood, paper pulp, paper and paperboard industries / or: Manufacture in which: the value of all the materials used does not exceed 40 % of the ex-works price of the product, within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexico
Machines for wood, paper pulp and paperboard industries / or: Manufacture: in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palestine
Machines for wood, paper pulp and paperboard industries / or: Manufacture: in which the value of all the materials used does not exceed 40% of the ex-works price of the product; where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
EU-Singapore FTA · Singapore
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
EU-Viet Nam FTA · Vietnam
machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric; / or: Manufacture from materials of any subheading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.
Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets
Legal and explanatory notes for 8419000000
8419 20 00 CN Explanatory Notes: Medical, surgical or laboratory sterilisers
The apparatus covered by this subheading, intended as equipment for clinics, operating theatres, medical centres, etc., consists of receptacles in which medical and surgical instruments as well as cotton wool, absorbent lint and other dressings are subjected to a temperature of 100 °C or more in order to destroy the micro-organisms they may be carrying. They are usually in the form of a paralleliped or a cylinder standing on a pedestal and containing removable grids. Generally, the container is of steel or aluminium and lined with insulating material. The door may be glazed to allow the instruments placed in the interior to be seen. Some appliances are in the form of cabinets or other furniture. In this case, a steriliser proper may incorporate a rack for storing instruments or other articles to be sterilised; this will not affect its classification in this subheading. These appliances are heated by spirit, petroleum, gas or electricity and sterilisation is effected by boiling water (vats), steam under pressure (autoclaves) or hot dry air (ovens), depending on the design of the appliance.
8419 50 20 CN Explanatory Notes: and 8419 50 80
Heat-exchange units Heat-exchange units are used: 1. to bring about a change of temperature in fluids or gases without changing their state, this change of temperature being in some cases sufficient to cause sterilisation or pasteurisation; 2. to vaporise or condense fluids. This subheading includes: 1. condensers for nitrogen and other gases; 2. devices called ‘freezers’, for the cooling and condensing of solvents used mainly in dyeing and dry-cleaning; 3. cooling apparatus for liquids, vapour or gas, used in various industries (for example, dairies, breweries); 4. continuous pasteurisation apparatus, used notably in dairies (plate pasteurisers). This subheading does not cover: (a) instantaneous or storage water heaters of subheading 8419 11 00 or 8419 19 00; (b) apparatus in which: — the thermal exchange is used to transform a liquid or gaseous substance into a solid state (for example, spray drying); — the thermal exchange between the two fluids does not take place through a wall (for example, a free air-flow tower). Such apparatus is generally classified in subheading 8419 89 10 or 8419 89 98.
8419 50 80 CN Explanatory Notes: and 8419 50 80
Heat-exchange units Heat-exchange units are used: 1. to bring about a change of temperature in fluids or gases without changing their state, this change of temperature being in some cases sufficient to cause sterilisation or pasteurisation; 2. to vaporise or condense fluids. This subheading includes: 1. condensers for nitrogen and other gases; 2. devices called ‘freezers’, for the cooling and condensing of solvents used mainly in dyeing and dry-cleaning; 3. cooling apparatus for liquids, vapour or gas, used in various industries (for example, dairies, breweries); 4. continuous pasteurisation apparatus, used notably in dairies (plate pasteurisers). This subheading does not cover: (a) instantaneous or storage water heaters of subheading 8419 11 00 or 8419 19 00; (b) apparatus in which: — the thermal exchange is used to transform a liquid or gaseous substance into a solid state (for example, spray drying); — the thermal exchange between the two fluids does not take place through a wall (for example, a free air-flow tower). Such apparatus is generally classified in subheading 8419 89 10 or 8419 89 98.
8419 89 10 CN Explanatory Notes: Cooling towers and similar plant for direct cooling (without a separating wall) by means of recirculated water
This subheading covers cooling towers in which the water to be cooled releases its heat directly into the air by means of evaporation. The heated water is pumped up, then trickles down freely inside the cooling tower and in so doing is cooled by the rising air (chimney effect).
8419 89 98 CN Explanatory Notes: Other
This subheading covers apparatus for smoking raw sausages, even when the sausage undergoes thermal treatment during smoking which results in the partial or total cooking of the sausage. The apparatus consists of a large chamber heated by steam coils; hot or cold smoke is blown into the chamber from outside by a fan. It is also equipped with a humidifier and with coils containing cold water for cooling. The raw sausages are conveyed into the chamber, suspended on moving frames. Items of equipment known as ‘tableware dispensers’ for the holding and dispensing of tableware to diners in canteens or self-service restaruants are excluded from this subheading, even where they are equipped with an electrical heating device or water-bath heating for warming the tableware (heading 9403).
Notes to chapter 84
Notes 1. This chapter does not cover: (a) millstones, grindstones or other articles of Chapter 68; (b) machinery or appliances (for example, pumps) of ceramic material and ceramic parts of machinery or appliances of any material (Chapter 69); (c) laboratory glassware (heading 7017); machinery, appliances or other articles for technical uses or parts thereof, of glass (heading 7019 or 7020); (d) articles of heading 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81); (e) vacuum cleaners of heading 8508; (f) electromechanical domestic appliances of heading 8509; digital cameras of heading 8525; (g) radiators for the articles of Section XVII; or (h) hand-operated mechanical floor sweepers, not motorised (heading 9603). 2. Subject to the operation of note 3 to Section XVI and subject to note 11 to this chapter, a machine or appliance which answers to a description in one or more of the headings 8401 to 8424, or heading 8486 and at the same time to a description in one or more of the headings 8425 to 8480 is to be classified under the appropriate heading of the former group or under heading 8486, as the case may be, and not the latter group. (A) Heading 8419 does not, however, cover: (a) germination plant, incubators or brooders (heading 8436); (b) grain dampening machines (heading 8437); (c) diffusing apparatus for sugar juice extraction (heading 8438); (d) machinery for the heat-treatment of textile yarns, fabrics or made up textile articles (heading 8451); or (e) machinery, plant or laboratory equipment, designed for a mechanical operation, in which a change of temperature, even if necessary, is subsidiary. (B) Heading 8422 does not cover: (a) sewing machines for closing bags or similar containers (heading 8452); or (b) office machinery of heading 8472. (C) Heading 8424 does not cover: (a) ink-jet printing machines (heading 8443); or (b) water-jet cutting machines (heading 8456). 3. A machine tool for working any material which answers to a description in heading 8456 and at the same time to a description in heading 8457, 8458, 8459, 8460, 8461, 8464 or 8465 is to be classified in heading 8456. 4. Heading 8457 applies only to machine tools for working metal, other than lathes (including turning centres), which can carry out different types of machining operations either: (a) by automatic tool change from a magazine or the like in conformity with a machining programme (machining centres); (b) by the automatic use, simultaneously or sequentially, of different unit heads working on a fixed position workpiece (unit construction machines, single station); or (c) by the automatic transfer of the workpiece to different unit heads (multi-station transfer machines). 5. For the purposes of heading 8462, a ‘slitting line’ for flat products is a processing line composed of an uncoiler, a coil flattener, a slitter and a recoiler. A ‘cut-to-length line’ for flat products is a processing line composed of an uncoiler, a coil flattener, and a shear. 6. (A) For the purposes of heading 8471, the expression ‘automatic data-processing machines’ means machines, capable of (1) storing the processing program or programs and at least the data immediately necessary for the execution of the program; (2) being freely programmed in accordance with the requirements of the user; (3) performing arithmetical computations specified by the user; and (4) executing, without human intervention, a processing program which requires them to modify their execution, by logical decision during the processing run. (B) Automatic data-processing machines may be in the form of systems consisting of a variable number of separate units. (C) Subject to paragraph (D) and (E) below, a unit is to be regarded as being a part of an automatic data-processing system if it meets all of the following conditions: (1) it is of a kind solely or principally used in an automatic data-processing system; (2) it is connectable to the central processing unit either directly or through one or more other units; and (3) it is able to accept or deliver data in a form (codes or signals) which can be used by the system. Separately presented units of an automatic data-processing machine are to be classified in heading 8471. However keyboards, X-Y coordinate input devices and disk storage units which satisfy the conditions of paragraphs (C)(2) and (C)(3) above, are in all cases to be classified as units of heading 8471. (D) Heading 8471 does not cover the following when presented separately, even if they meet all of the conditions set forth in note 6(C) above: (1) printers, copying machines, facsimile machines, whether or not combined; (2) apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network); (3) loudspeakers and microphones; (4) television cameras, digital cameras and video camera recorders; (5) monitors and projectors, not incorporating television reception apparatus. (E) Machines incorporating or working in conjunction with an automatic data-processing machine and performing a specific function other than data processing are to be classified in the headings appropriate to their respective functions or, failing that, in residual headings. 7. Heading 8482 applies, inter alia, to polished steel balls, the maximum and minimum diameters of which do not differ from the nominal diameter by more than 1 % or by more than 0,05 mm, whichever is less. Other steel balls are to be classified in heading 7326. 8. A machine which is used for more than one purpose is, for the purposes of classification, to be treated as if its principal purpose were its sole purpose. Subject to note 2 to this chapter and note 3 to Section XVI, a machine the principal purpose of which is not described in any heading or for which no one purpose is the principal purpose is, unless the context otherwise requires, to be classified in heading 8479. Heading 8479 also covers machines for making rope or cable (for example, stranding, twisting or cabling machines) from metal wire, textile yarn or any other material or from a combination of such materials. 9. For the purposes of heading 8470, the term ‘pocket-size’ applies only to machines the dimensions of which do not exceed 170 mm × 100 mm × 45 mm. 10. For the purposes of heading 8485, the expression ‘additive manufacturing’ (also referred to as 3D printing) means the formation of physical objects, based on a digital model, by the successive addition and layering, and consolidation and solidification, of material (for example, metal, plastics or ceramics). Subject to note 1 to Section XVI and note 1 to Chapter 84, machines answering to the description in heading 8485 are to be classified in that heading and in no other heading of the nomenclature. 11. (A) Notes 12(a) and 12(b) to Chapter 85 also apply with respect to the expressions ‘semiconductor devices’ and ‘electronic integrated circuits’, respectively, as used in this note and in heading 8486. However, for the purposes of this note and of heading 8486, the expression ‘semiconductor devices’ also covers photosensitive semiconductor devices and light-emitting diodes (LED). (B) For the purposes of this note and of heading 8486, the expression ‘manufacture of flat panel displays’ covers the fabrication of substrates into a flat panel. It does not cover the manufacture of glass or the assembly of printed circuit boards or other electronic components onto the flat panel. The expression ‘flat panel display’ does not cover cathode-ray tube technology. (C) Heading 8486 also includes machines and apparatus solely or principally of a kind used for: (1) the manufacture or repair of masks and reticles; (2) assembling semiconductor devices or electronic integrated circuits; (3) lifting, handling, loading or unloading of boules, wafers, semiconductor devices, electronic integrated circuits and flat panel displays. (D) Subject to note 1 to Section XVI and note 1 to Chapter 84, machines and apparatus answering to the description in heading 8486 are to be classified in that heading and in no other heading of the nomenclature. Subheading notes 1. For the purposes of subheading 8465 20, the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme. 2. For the purposes of subheading 8471 49, the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer). 3. For the purposes of subheading 8481 20, the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481 20 takes precedence over all other subheadings of heading 8481. 4. Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded. Additional notes 1. For the purposes of subheadings 8407 10 and 8409 10, the expression ‘aircraft engines’ shall apply only to engines designed for fitting with an airscrew or rotor. 2. Subheading 8471 70 30 shall also apply to CD-ROM drives, being storage units for automatic data-processing machines, which consist of drive units designed for retrieving the signals from CD-ROMs, audio CDs and photo CDs and equipped with a jack for earphones, a volume-control button or a start/stop button.
Notes to section XVI
MACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES Notes 1. This section does not cover: (a) transmission or conveyor belts or belting, of plastics of Chapter 39, or of vulcanised rubber (heading 4010), or other articles of a kind used in machinery or mechanical or electrical appliances or for other technical uses, of vulcanised rubber other than hard rubber (heading 4016); (b) articles of leather or of composition leather (heading 4205) or of furskin (heading 4303), of a kind used in machinery or mechanical appliances or for other technical uses; (c) bobbins, spools, cops, cones, cores, reels or similar supports, of any material (for example, Chapter 39, 40, 44 or 48 or Section XV); (d) perforated cards for jacquard or similar machines (for example, Chapter 39 or 48 or Section XV); (e) transmission or conveyor belts or belting, of textile material (heading 5910) or other articles of textile material for technical uses (heading 5911); (f) precious or semi-precious stones (natural, synthetic or reconstructed) of headings 7102 to 7104, or articles wholly of such stones of heading 7116, except unmounted worked sapphires and diamonds for styli (heading 8522); (g) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39); (h) drill pipe (heading 7304); (ij) endless belts of metal wire or strip (Section XV); (k) articles of Chapter 82 or 83; (l) articles of Section XVII; (m) articles of Chapter 90; (n) clocks, watches or other articles of Chapter 91; (o) interchangeable tools of heading 8207 or brushes of a kind used as parts of machines (heading 9603); similar interchangeable tools are to be classified according to the constituent material of their working part (for example, in Chapter 40, 42, 43, 45 or 59 or heading 6804 or 6909); (p) articles of Chapter 95; or (q) typewriter or similar ribbons, whether or not on spools or in cartridges (classified according to their constituent material, or in heading 9612 if inked or otherwise prepared for giving impressions), or monopods, bipods, tripods and similar articles, of heading 9620. 2. Subject to note 1 to this section, note 1 to Chapter 84 and note 1 to Chapter 85, parts of machines (not being parts of the articles of heading 8484, 8544, 8545, 8546 or 8547) are to be classified according to the following rules: (a) Parts which are goods included in any of the headings of Chapter 84 or 85 (other than headings 8409, 8431, 8448, 8466, 8473, 8487, 8503, 8522, 8529, 8538 and 8548) are in all cases to be classified in their respective headings. (b) Other parts, if suitable for use solely or principally with a particular kind of machine, or with a number of machines of the same heading (including a machine of heading 8479 or 8543) are to be classified with the machines of that kind or in heading 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 or 8538 as appropriate. However, parts which are equally suitable for use principally with the goods of headings 8517 and 8525 to 8528 are to be classified in heading 8517, and parts which are suitable for use solely or principally with the goods of heading 8524 are to be classified in heading 8529; (c) All other parts are to be classified in heading 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 or 8538 as appropriate or, failing that, in heading 8487 or 8548. 3. Unless the context otherwise requires, composite machines consisting of two or more machines fitted together to form a whole and other machines designed for the purpose of performing two or more complementary or alternative functions are to be classified as if consisting only of that component or as being that machine which performs the principal function. 4. Where a machine (including a combination of machines) consists of individual components (whether separate or interconnected by piping, by transmission devices, by electric cables or by other devices) intended to contribute together to a clearly defined function covered by one of the headings in Chapter 84 or 85, then the whole falls to be classified in the heading appropriate to that function. 5. For the purposes of these notes, the expression ‘machine’ means any machine, machinery, plant, equipment, apparatus or appliance cited in the headings of Chapter 84 or 85. 6. (A) Throughout the nomenclature, the expression ‘electrical and electronic waste and scrap’ means electrical and electronic assemblies, printed circuit boards, and electrical or electronic articles that: (a) have been rendered unusable for their original purposes by breakage, cutting-up or other processes or are economically unsuitable for repair, refurbishment or renovation to render them fit for their original purposes; and (b) are packaged or shipped in a manner not intended to protect individual articles from damage during transportation, loading and unloading operations. (B) Mixed consignments of ‘electrical and electronic waste and scrap’ and other waste and scrap are to be classified in heading 8549. (C) This section does not cover municipal waste, as defined in note 4 to Chapter 38. Additional notes 1. Tools necessary for the assembly or maintenance of machines are to be classified with those machines if imported with them. Interchangeable tools imported with machines are also to be classified therewith if they form part of the normal equipment of the machines and are normally sold with them. 2. Should the customs so require, the declarant shall produce, in support of his declaration, an illustrated document (for example, instructions, prospectus, a page from a catalogue, a photograph) giving the normal description of the machine, its uses and essential characteristics and, in respect of an unassembled or disassembled machine, an assembly plan and a list of the contents of the various packages. 3. The provisions of general rule 2(a) are also applicable, at the request of the declarant and subject to conditions stipulated by the competent authorities, to machines imported in split consignments.
Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex
EU classification regulations for 8419000000
Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.
- 8419 12 00 Nov 11, 2014 · Regulation on EUR-Lex
A solar panel with dimensions of approximately 2 × 2 m, consisting of 25 glass vacuum tubes mounted in parallel and interconnected via a collector pipe. Each vacuum tube is constituted by two concentric pipes, containing heat transfer fluid. The inner pipe of each tube is coated with an absorption layer.
The solar energy is absorbed by the layer on the inner pipe of the tubes and converted into heat energy. The heat is then transferred to the heat transfer fluid, which turns into gas, rises and transfers the heat to the collector pipe (a copper manifold). The heat is subsequently transferred from the collector pipe to a water storage tank by way of a tubing system containing heat transfer fluid circulating by means of a pump managed by a controller. The pump, controller, tubing system and water storage tank are not included upon presentation. The solar panel is used in solar water heating systems and is intended to be mounted on the roof.
Reasons
Classification is determined by general rules 1, 2(a) and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 8419 and 8419 19 00 . The solar panel is considered to have the essential character of a complete or finished article (water heater) as it contains all the necessary components for generating heat. The missing components are used for transferring the heat and storing the water. Consequently, classification under subheading 8419 90 85 as parts of water heaters is excluded. As the solar panel converts solar energy into heat, it cannot be considered a mere heat exchange unit of subheading 8419 50 (see also the Harmonized System Explanatory Notes (HSEN) to heading 8419 , group (I) (B)). The solar panel is therefore to be classified under CN code 8419 19 00 as other instantaneous or storage water heaters, non-electric (see also the HSEN to heading 8419 , group (I), last paragraph).
Classified under 8419 19 00 at the time
- 8419 19 00 Nov 11, 2014 · Regulation on EUR-Lex
A solar panel with dimensions of approximately 2 × 2 m, consisting of 25 glass vacuum tubes mounted in parallel and interconnected via a collector pipe. Each vacuum tube is constituted by two concentric pipes, containing heat transfer fluid. The inner pipe of each tube is coated with an absorption layer.
The solar energy is absorbed by the layer on the inner pipe of the tubes and converted into heat energy. The heat is then transferred to the heat transfer fluid, which turns into gas, rises and transfers the heat to the collector pipe (a copper manifold). The heat is subsequently transferred from the collector pipe to a water storage tank by way of a tubing system containing heat transfer fluid circulating by means of a pump managed by a controller. The pump, controller, tubing system and water storage tank are not included upon presentation. The solar panel is used in solar water heating systems and is intended to be mounted on the roof.
Reasons
Classification is determined by general rules 1, 2(a) and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 8419 and 8419 19 00 . The solar panel is considered to have the essential character of a complete or finished article (water heater) as it contains all the necessary components for generating heat. The missing components are used for transferring the heat and storing the water. Consequently, classification under subheading 8419 90 85 as parts of water heaters is excluded. As the solar panel converts solar energy into heat, it cannot be considered a mere heat exchange unit of subheading 8419 50 (see also the Harmonized System Explanatory Notes (HSEN) to heading 8419 , group (I) (B)). The solar panel is therefore to be classified under CN code 8419 19 00 as other instantaneous or storage water heaters, non-electric (see also the HSEN to heading 8419 , group (I), last paragraph).
- 8419 89 98 Apr 26, 2016 · Regulation on EUR-Lex
A hand-held electric apparatus (so-called ‘glue gun’) designed to apply hot melted glue to wood and other materials. The body of the apparatus is made of plastics and has an interchangeable nozzle made of base metal. The nozzle is adjustable so the flow of the glue can be regulated.
When the apparatus is turned on, a delivery tube controlled by a thermostat is heated which in turn heats a replaceable glue stick (with a maximum temperature of 207 °C). The glue becomes soft and can be applied to the materials to be glued. It is designed to be used mainly by professionals, for example, in the packaging industry, the furniture industry, or a stand assembly. See image (*1).
Reasons
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, note 3 to Section XVI, and by the wording of CN codes 8419 , 8419 89 and 8419 89 98 . Classification under heading 8205 as a hand tool of base metal, not elsewhere specified or included, is excluded as the function of the apparatus is specified in Chapter 84. Classification under heading 8424 as a mechanical appliance for projecting, dispersing, or spraying liquids or powders or as a spray gun is also excluded as the glue is not projected, dispersed nor sprayed. Classification under heading 8516 as an electrothermic appliance of a kind used for domestic purposes is also excluded as the apparatus is designed for use by professionals and is not of a kind normally used in the household (see also the Harmonised System Explanatory Notes (HSEN) to heading 8516 , (E)). Classification under heading 8465 as a machine tool for working wood is also excluded, as the apparatus does not work the wood. In addition, it is held by hand and not mounted elsewhere (see also the HSEN to heading 8465 ). The apparatus is designed for the treatment of materials by a process involving a change of temperature by heating (a function falling under heading 8419 ), which is considered its principal function, and for regulation of the flow of the glue and its application (an individual function, not specified or included elsewhere). It is therefore to be classified under CN code 8419 89 98 as other machinery, electrically heated, for the treatment of materials.
+ 1 more
- 8419 89 98 Nov 26, 2012 · Regulation on EUR-Lex
A microprocessor-controlled hand-held machine (so-called "electronic hot air blowing gun"), for generating temperatures of between 50 and 630 °C, with a maximum output power of 2 000 W and dimensions of approximately 26 × 20 × 9 cm.
The machine comprises: — a heating element, — a fan with a motor for blowing air at 3 different speeds, — a display for indicating the temperature. The machine is for use by craftsmen, for example, in stripping paint, shrinking tubing on cables, forming PVC, soft soldering, welding and joining plastic, welding plastic pipes and rods and foil welding. (*1) See image.
Reasons
Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 2 to Chapter 84 and by the wording of CN codes 8419 , 8419 89 and 8419 89 98 . As the machine is designed for use by craftsmen and is not of a kind normally used in households, classification under heading 8516 as an electrothermic appliance of a kind used for domestic purposes is excluded. The machine corresponds to the descriptions of both headings 8419 and 8467 . In accordance with Note 2 to Chapter 84, classification under heading 8467 as a tool for working in the hand with self-contained electric motor is excluded. The machine is therefore to be classified under CN code 8419 89 98 as machinery for the treatment of materials by a process involving a change of temperature.
UK advance tariff rulings for 8419000000
Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.
- UK 8419200000 Valid Jan 23, 2024 to Jan 22, 2027 · Ruling 600009678 on GOV.UK
VHP Biodecontamination units utilize VAPROX Hydrogen Peroxide Sterilant. The 35% or 59% aqueous hydrogen peroxide sterilant is produced into flash vaporized hydrogen peroxide (VHP). Under the low-temperature biodecontamination method within an enclosed area, the heated air steam carriers the vapor into the enclosed space. The air and VHP microbial are drawn out of the enclosed space and pass through a catalytic converter degrading the VHP microbial into oxygen and water vapor for a pre-programmed cycle time period throughout the enclosure. The VHP vapor is what kills the bacteria. Biological indicators and/or chemical indicators can be used to confirm that sterility parameters have been met.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - has been used to classify this product by the terms of heading 8419-Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 6 - has been used to classify the goods to subheading …
- UK 8419200000 Valid Feb 22, 2024 to Feb 21, 2027 · Ruling 600009914 on GOV.UK
VHP Biodecontamination units utilize VAPROX Hydrogen Peroxide Sterilant. The 35% or 59% aqueous hydrogen peroxide sterilant is produced into flash vaporized hydrogen peroxide (VHP). Under the low-temperature biodecontamination method within an enclosed area, the heated air steam carriers the vapor into the enclosed space. The air and VHP microbial are drawn out of the enclosed space and pass through a catalytic converter degrading the VHP microbial into oxygen and water vapor for a pre-programmed cycle time period throughout the enclosure. The VHP vapor is what kills the bacteria. Biological indicators and/or chemical indicators can be used to confirm that sterility parameters have been met.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - has been used to classify this product by the terms of heading 8419-Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …
- UK 8419200000 Valid Feb 29, 2024 to Feb 27, 2027 · Ruling 600009975 on GOV.UK
VHP Biodecontamination units utilize VAPROX Hydrogen Peroxide Sterilant. The 35% or 59% aqueous hydrogen peroxide sterilant is produced into flash vaporized hydrogen peroxide (VHP). Under the low-temperature biodecontamination method within an enclosed area, the heated air steam carriers the vapor into the enclosed space. The air and VHP microbial are drawn out of the enclosed space and pass through a catalytic converter degrading the VHP microbial into oxygen and water vapor for a pre-programmed cycle time period throughout the enclosure. The VHP vapor is what kills the bacteria. Biological indicators and/or chemical indicators can be used to confirm that sterility parameters have been met.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - has been used to classify this product by the terms of heading 8419-Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …
+ 17 more
- UK 8419200000 Valid Apr 10, 2024 to Apr 9, 2027 · Ruling 600010232 on GOV.UK
VHP Biodecontamination units utilize VAPROX Hydrogen Peroxide Sterilant. The 35% or 59% aqueous hydrogen peroxide sterilant is produced into flash vaporized hydrogen peroxide (VHP). Under the low-temperature biodecontamination method within an enclosed area, the heated air steam carriers the vapor into the enclosed space. The air and VHP microbial are drawn out of the enclosed space and pass through a catalytic converter degrading the VHP microbial into oxygen and water vapor for a pre-programmed cycle time period throughout the enclosure. The VHP vapor is what kills the bacteria. Biological indicators and/or chemical indicators can be used to confirm that sterility parameters have been met
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - has been used to classify this product by the terms of heading 8419-Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …
- UK 8419200000 Valid Jan 15, 2025 to Jan 14, 2028 · Ruling 600012156 on GOV.UK
A Bio-decontamination Unit utilises Vaprox Sterilant as a means of achieving dry, low temperature sterilization. The unit has a stainless steel outer shell casing is an economical bio-decontamination Unit for small to medium sized enclosures requiring an integrated solution. Bio-decontamination Unit is specifically designed for sterilization processes in laboratory, medical, and pharmaceutical environments. The unit features include a Control Display Panel which is located on the front of the Bio unit. The touch panel is a backlit thin film transistor (TFT) display equipped with graphics and analog touch membrane. The remote printer box connects to the unit via Ethernet to provide a print out of the cycle record. A separate 100-240 VAC power source is required. The unit is an integrated, small volume, hydrogen peroxide vapor generator for bio-decontamination of clean, dry, sealed enclosures such as isolators, chambers, and work cabinets), air is drawn from a dehumidified air source. The air stream is HEPA filtered and injected with VHP vapor that is distributed to the enclosure to reduce humidity to a predetermined level in the 10-60% relative humidity range. The unit uses vaporised solution of 35% hydrogen peroxide (Vaprox Hydrogen Peroxide Sterilant - VHP) and a heated air carries the vapor into the enclosed space requiring bio-decontamination to eliminate bacteria, viruses, and other microorganisms, achieving sterilization. The Hydrogen Peroxide Sterilant minimizes risk of equipment damage and is biodegradable into water vapor and oxygen. Heating Hydrogen Peroxide Sterilant is an integral component of the sterilisation process. Without reaching the appropriate temperature, hydrogen peroxide would not vaporise, and sterilisation would not occur. To minimize exposure to liquid hydrogen peroxide during handling, the unit uses specially designed disposable cartridges containing approximately 950 mL of the Hydrogen Peroxide Sterilant. The reliance on controlled temperature as part of the sterilization cycle is a defining feature of this product. Units are available for operation with 230 Volt or 120 Volt, 50/60 Hz, single-phase electrical service. The bio-decontamination cycle consists of four phases as follows: The Unit integrates processes that involve: • Dehumidification: reducing the relative humidity to prepare the enclosure for sterilisation. • Conditioning: injecting hydrogen peroxide vapor into the enclosure. • Bio-decontamination: Maintaining the required concentration of hydrogen peroxide vapor. • Aeration: Removing hydrogen peroxide vapor through catalytic converters or exhaust systems. Weight 110 lb. (50kg) without dryer cartridge (shipping weight) 80 lb. (36.3kg) without dryer cartridge (installation weight.)
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - Has been used to classify this product by the terms of heading 8419 20 - Medical, …
- UK 8419200000 Valid Apr 14, 2025 to Apr 13, 2028 · Ruling 600012837 on GOV.UK
A VHP (Vaprox Hydrogen Peroxide Sterilant) Bio-decontamination Unit with a frame which is constructed of aluminium and stainless steel and Casing which is scratch and crack resistant, moulded in colour, ABS plastic. The unit is used primarily in cleanrooms, pharmaceutical manufacturing facilities, laboratories, healthcare environments, and biosafety areas where sterile conditions are critical. The Bio-decontamination Unit is designed for mobile bio decontamination of clean, dry, sealed Enclosures (e.g. rooms, facilities and equipment) by using hydrogen peroxide vapor sterilisation. The unit uses vaporised solution of 35% hydrogen peroxide (Vaprox Hydrogen Peroxide Sterilant - VHP.) The primary function of the Bio-decontamination Unit is to decontaminate enclosed spaces by eliminating microbial contaminants, ensuring sterile conditions in critical environments. It operates as a standalone sterilization unit or can be networked with multiple units for larger spaces. Equipped with a programmable control system, integrated sensors, and automated sterilant injection, it provides a validated and repeatable decontamination process. This capability is essential for pharmaceutical production, hospital infection control, and biosafety containment, where maintaining sterility is a regulatory and operational requirement. The Bio-decontamination Unit follows a multi-phase sterilization process to ensure thorough decontamination of enclosed spaces. The key processes involved are: Preparation Phase - The enclosure to be sterilized (e.g., a cleanroom, laboratory, or equipment chamber) is sealed to maintain a controlled environment. Operators select a pre-programmed decontamination cycle via the touchscreen PLC control system. The unit performs self-diagnostics to ensure system readiness. The Injection Phase: The system vaporizes Hydrogen Peroxide Sterilant (35% H₂O₂ solution) and disperses it into the enclosure. Using high-velocity airflow, the vapor is uniformly distributed to reach all surfaces. The Smart-Phase software adjusts the hydrogen peroxide concentration based on temperature, humidity, and enclosure conditions, ensuring optimized decontamination. The base unit includes 120V or 230V power cord. Electricity 120 Vac, 60 Hz, 1 Phase, 15 Amp 230 Vac, 50 Hz, 1 Phase, 7.5 Amp. Dimensions Size: (W x L x H) 21-1/5 x 39-9/10 x 38-9/10” (539 x 1014 x 988 mm.) Unit weighs approximately 141 lb (64 kg).
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - Has been used to classify this product by the terms of heading 8419 20 - Medical, …
- UK 8419200000 Valid Jul 21, 2025 to Jul 20, 2028 · Ruling 600013377 on GOV.UK
A 136 litre (4.8 cubic feet) low temperature steriliser system which is equipped with two shelves. Its features include a control display panel which is located on the front of the sterilization unit, a 10.4 inch screen, and a printer for an easy to read permanent record of the sterilization cycle. The product is available in both single and double door configurations. The operating temperature is approximately 50C (122°F) and the sterilizer chamber removes the pressure and moisture before increasing the temperature from approximately 50C to approximately 60C for the sterilant to be emitted in the chamber. The process is fully automated, is compatible with a broad range of materials. There are various pre-programmed cycles that can be selected to reflect the type of instruments needed to be sterilized, each cycle has a specific time and weight parameter to determine the proper amount of hydrogen peroxide from the sterilant cup that should be administered for sterilization. Dimensions are: cabinet: 838 x 1908 x 973 mm, chamber size: 432 x 381 x 826 mm, chamber volume: 136 litres.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …
- UK 8419200000 Valid Aug 8, 2025 to Aug 7, 2028 · Ruling 600013450 on GOV.UK
A Low Temperature Sterilization System units which utilize VAPROX HC Sterilant is intended for use in the terminal sterilization of properly prepared (cleaned, rinsed and dried) medical devices in Healthcare Facilities. The unit has a large, easy to use touch screen control panel that is used to initiate and monitor the validated sterilization cycles. The 59% liquid hydrogen peroxide sterilant is a multi-cycle cup that is placed in the sterilizer’s cup interface and the user then closes the sterilizer door to create a vacuum condition. Various pre-programmed cycles can be selected to reflect the type of instruments needed to be sterilized. Each cycle has a specific time period and weight parameter to determine the proper amount of hydrogen peroxide from the VAPROX HC Sterilant cup that should be administered for sterilization. The sterilizer chamber removes the pressure and moisture before increasing the temperature from approximately 50 degrees Celsius to approximately 60 degrees Celsius for the VAPROX HC Sterilant to be emitted in the chamber. Chemical indicator strips are used to confirm that the sterilant penetrated the packs that were to be sterilized. Biological indictors and Tyvek Packaging are used within the unit to confirm sterility parameters have been met.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - Has been used to classify this product by the terms of heading 8419 20 - Medical, …
- UK 8419200000 Valid Aug 11, 2025 to Aug 10, 2028 · Ruling 600013459 on GOV.UK
A 60 litre (2.1 cubic feet) low temperature sterilization system. Its features include a control display panel which is located on the front of the sterilization unit, with an 8.4-inch screen, and a printer for an easy to read permanent record of the sterilization cycle. The operating temperature is approximately 50C (122°F) and the sterilizer chamber removes the pressure and moisture before increasing the temperature from approximately 50C to approximately 60C for the sterilant to be emitted in the chamber. The process is fully automated, is compatible with a broad range of materials. There are various pre-programmed cycles that can be selected to reflect the type of instruments needed to be sterilized, each cycle has a specific time and weight parameter to determine the proper amount of hydrogen peroxide from the sterilant cup that should be administered for sterilization. Overall sterilizer dimensions are - 572 x 835 x 1562 mm, chamber size - 330 x 711 x 254 mm, chamber volume - 60 litres.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …
- UK 8419200000 Valid Nov 3, 2025 to Nov 2, 2028 · Ruling 600013737 on GOV.UK
The product is a Biodecontamination unit. It is a low-temperature sterilisation system that uses Hydrogen Peroxide Sterilant under vacuum conditions. The chamber can hold up to 136 litres and is 4.8ft³. The chamber has shelving present to place contaminated instruments (metal and non metal) to be sterilised. The unit has three factory programmable cycles which can be activated using the built in touchscreen display (10.4-inch colour). It is used primarily in laboratory and industrial settings for instruments and devices sensitive to heat and moisture. There are no toxic by-products created, only water vapour and oxygen are produced. Dimensions - Height 1908mm, Width 838mm, Depth 973mm.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - Has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - Has been used to classify this product by the …
- UK 8419390000 Valid Nov 13, 2024 to Nov 12, 2027 · Ruling 600011574 on GOV.UK
Automatic Air Dehydrator which is a device used primarily in the field of telecommunications with the key function being to remove moisture and keep waveguide and coax systems dry. Waveguide consists of hollow metallic tubes that guide microwave signals. Moisture can interfere with signal transmission, leading to loss of efficiency and increased attenuation. Automatic dehydrators adjust their performance based on real-time humidity data. This reduces the need for manual intervention and ensures consistent performance. Air is dehydrated by passing it through a drying canister containing the drying agent. The dried air is delivered to the communications equipment through a connection in the rear panel. The moisture is removed from the drying canisters by heat. The Ethernet communications capabilities within the dehydrator include support for the web interface, Simple Network Management Protocol (SNMP), User Datagram Protocol (UDP) and Trivial File Transfer Protocol (TFTP). It allows for monitoring and configuration of the dehydrator as well as providing a means for upgrading the dehydrator’s software in the field. The dehydrator is housed in a rack mountable, light weight metal chassis, has simple power connections and ethernet, RS-422/485, RS-232 and alarm relay outputs. A front panel with display allows for IP configuration and status monitoring with or without network connection. For shipment, the units are packaged in purpose designed protective packaging material.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 5 (b) - has been used to identify the type of …
- UK 8419508090 Valid Feb 2, 2026 to Feb 1, 2029 · Ruling 600014789 on GOV.UK
Air to air heat exchanger unit, comprising, amongst other components, 3 electric fans and 2 sets of aluminium fins. Each set of fins are separated from each other with an air blocker that seals the two separate airflows from each other. Dimensions are 610mm x 355mm x 174mm. For use as a thermal management solution. Heated air is absorbed and cooled by the aluminium fins within the unit. To be configured to fit side, back or door mounting positions
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 6 has been used to classify the goods to sub-heading 8415.50 – …
- UK 8419818090 Valid Sep 17, 2025 to Sep 16, 2028 · Ruling 600013567 on GOV.UK
The electric Grill Chargrill Ovens can prepare grilled products, cook pizzas, breads, thick pieces of meats and roast chickens Fat atomising technology so fat tray to clean. Hot temperature and easy to clean metal plate heat bed. High heat atomises fat so there's no fat tray to clean The water vapour that's naturally released from the fat and oils during cooking is also absorbed back into the food This is industrial Grade griller for Restaurants, pubs, cafes, bars, festivals. Product features Dimensions690(H) x 905(W) x 835(D)mm Dimensions - cooking area800 x 554mm Material Stainless Steel Weight221kg High heat - low energy consumption - faster whilst saving up to 25% on energy costs compared to some other electric grills
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (Gir)s Gir 1 has been used to classify this product by the terms of heading 8419 - machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. Gir 6 has been used to classify the goods to subheading level …
- UK 8419818090 Valid Sep 10, 2025 to Sep 9, 2028 · Ruling 600013568 on GOV.UK
Industrial gas griller, made of steel and iron, for use in the commercial food industry. It has push-button piezo ignition to the individual burners, 4 brander bars which are reversible and it has a pressed drip tray and container for grease debris collection. All components are easily removable for cleaning. It can be converted between natural and propane gas types and it can be joined closely to other models in the brand. Dimensions of the griller are 550mm (H) x 400mm (W) x 900mm (D) and weighs 55kg.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …
- UK 8419818090 Valid Sep 10, 2025 to Sep 9, 2028 · Ruling 600013593 on GOV.UK
A stainless steel and enamelled cast iron electric crêpe maker for the commercial industry. It has 3kW power with a thermostat controlled temperature up to 320°C and it is also suitable for the cooking of chapatti or blinis. Its dimensions are 160mm (H) x 400mm (Ø) and weighs 14kg.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …
- UK 8419899800 Valid Apr 24, 2024 to Apr 23, 2027 · Ruling 600010048 on GOV.UK
This product is a kit designed for setting off smoke and heat detectors. The kit contains 1 heat unit, battery batons, fast charger, removal tool, protective carrying bag and extension poles (height of 9 metres). The head unit incorporates a smoke capsule, pcbs, a stepper motor, a smoke generator (miniature heat exchanger) assembly and a heat testing assembly. The head unit is designed to be placed over a smoke/heat detector to check if it is working by setting it off by generating synthetic smoke or heat which is blown out through ducts in the unit in the direction of the detector by means of a fan. The extension poles are designed to be attached to the head unit to reach high up detectors. Product is packaged in a single carton.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8419 Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 3b has been used as the Heat unit is considered to be the …
- UK 8419899800 Valid Apr 24, 2024 to Apr 23, 2027 · Ruling 600010049 on GOV.UK
This product is a kit that is designed to test smoke and heat detectors to a height of 6 meters. The kit consists of: 1 Test kit 1 Removal tool 1 Storage bag 1 telescopic pole The kit is packaged in a single cardboard carton.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8419 Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 3b has been used as the Heat unit is considered to be the …
- UK 8419899800 Valid Apr 24, 2024 to Apr 23, 2027 · Ruling 600010050 on GOV.UK
This product is a device which generates heat, smoke and carbon monoxide for the purpose of testing the correct function and operation of heat, smoke and carbon monoxide detectors. It is powered by a rechargeable battery and a charger is supplied. The product is then placed over the device under test and then produces smoke, carbon monoxide and/or hot air which is blown into its sensor in order to trigger the alarm, indicating to the user that it is working correctly. Extension poles are supplied which can be attached to the unit allowing the user to carry out the tests on units at height without the need for a ladder. Included in this set is a: Test kit Removal tool Storage bag Telescopic pole x 3 Extension poles. All equipment supplied with a storage bag and packaged in a single cardboard carton.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8419 Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 3b has been used as the Heat unit is considered to be the …
- UK 8419899800 Valid Jul 27, 2026 to Jul 26, 2029 · Ruling 600015886 on GOV.UK
A rubber mat used on waxing tables for heating up tins of wax, the contents of which are be applied to outdoor clothing such as jackets. Outer material of the product is silicone rubber, inside is a resistive heating element reinforced with glass textile. When power is applied the resistive heating element heats up the mat to make the wax useable for application to the clothing. The mat can operate at temperatures of up to 200 degrees Celsius continuously or 230 Celsius for short intervals
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 6 has been used to classify the goods to sub-heading 8419.89 – …
- UK 8419908590 Valid May 20, 2024 to May 19, 2027 · Ruling 600010499 on GOV.UK
Parts that are made from Brass, Copper Nickel and Aluminium Bronze for specific use in Heat Exchangers. The plates are cut to size and machined and drilled as per the customer's requirements. Each plate differs in the material, dimensions, machining and drilling patterns. Items are bespoke to customers requirements (Purchase Orders/ Technical Drawings) with specific end use only for Heat Exchangers.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 8419 - for machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 6 has been used to classify the goods to subheading level 841990 - Parts 8 Digit Code …
Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.
Restrictions and flags for 8419000000
- Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 8419
Art. 3i, goods generating significant revenue for Russia
Read the act on EUR-Lex
For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.
Import VAT in the EU
- Austria 20 %
- Belgium 21 %
- Bulgaria 20 %
- Croatia 25 %
- Cyprus 19 % maybe 3 %, 5 %
- Czechia 21 %
- Denmark 25 %
- Estonia 24 %
- Finland 25.5 %
- France 20 %
- Germany 19 %
- Greece 24 % maybe 13 %
- Hungary 27 %
- Ireland 23 %
- Italy 22 %
- Latvia 21 %
- Lithuania 21 %
- Luxembourg 17 %
- Malta 18 %
- Netherlands 21 %
- Poland 23 %
- Portugal 23 %
- Romania 21 %
- Slovakia 23 %
- Slovenia 22 %
- Spain 21 %
- Sweden 25 %
Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.
Rules of origin
Preferential rules of origin for subheading 841900 depend on the trade agreement. The Commission publishes them in Access2Markets.
Rules of origin on Access2MarketsInformation
When importing or exporting "Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric", it is crucial to have the correct HS code or TARIC code. The HS code 8419000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric".
- Check if any additional licenses, permits, or certificates are required to import "Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric" is 8419000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 84 was selected for nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 19 refers to Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
HS Code tree structure
8400000000 80
Chapter NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
8419000000 80
Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric
8419110000 10
- Instantaneous or storage water heaters, non-electric
8419110000 80
- - Instantaneous gas water heaters
8419120000 80
- - Solar water heaters
8419190000 80
- - Other
8419200000 80
- Medical, surgical or laboratory sterilisers
8419330000 10
- Dryers
8419330000 80
- - Lyophilisation apparatus, freeze drying units and spray dryers
8419340000 80
- - Other, for agricultural products
8419350000 80
- - Other, for wood, paper pulp, paper or paperboard
8419390000 80
- - Other
8419400000 80
- Distilling or rectifying plant
8419500000 80
- Heat-exchange units
8419502000 80
- - Heat exchange units made of fluoropolymers and with inlet and outlet tube bores with inside diameters measuring 3 cm or less
8419508000 80
- - Other
8419508010 80
- - - For use in civil aircraft
8419508030 80
- - - Aluminium heat exchanger for gas boilers designed for heat transfer: - with a height of 100mm or more, but not more than 150mm, - with a width of 235mm or more, but not more than 300mm, - with a length of 240mm or more, but not more than 300mm, - for a power output of 25kW or more, but not more than 35kW, - with a weight of 8Kg or more, but not more than 10Kg
8419508090 80
- - - Other
8419600000 80
- Machinery for liquefying air or other gases
8419810000 10
- Other machinery, plant and equipment
8419810000 80
- - For making hot drinks or for cooking or heating food
8419812000 80
- - - Percolators and other appliances for making coffee and other hot drinks
8419812010 80
- - - - For use in civil aircraft
8419812090 80
- - - - Other
8419818000 80
- - - Other
8419818010 80
- - - - For use in civil aircraft
8419818090 80
- - - - Other
8419890000 80
- - Other
8419891000 80
- - - Cooling towers and similar plant for direct cooling (without a separating wall) by means of recirculated water
8419893000 80
- - - Vacuum-vapour plant for the deposition of metal
8419899800 80
- - - Other
8419900000 80
- Parts
8419901500 80
- - Of sterilisers of subheading 8419 20 00
8419908500 80
- - Other
8419908510 80
- - - Of heat exchange units, for use in civil aircraft
8419908540 80
- - - Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
8419908590 80
- - - Other