Import trade restrictions for 8505200030 80
| Origin Origin country | Start | Duty / Tax | Legal Legal base Measure type | |
|---|---|---|---|---|
1011 | ERGA OMNES 1011 | 01-01-2022 | NAR | Regulation 2278/21 Supplementary unit (import) 110 |
1011 | ERGA OMNES 1011 | 01-01-2026 | 0.000 % | Regulation 2605/25 Autonomous suspension under end-use 115 |
Explanation of trade restrictions
Erga Omnes means "for all".
Third countries are countries that are not part of the EU.
GSP means "Generalised System of Preferences".
GSP Plus means "Generalised System of Preferences Plus".
European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.
OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information
CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.
SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".
Duty means "customs duties".
Information
When importing or exporting "Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles", it is crucial to have the correct HS code or TARIC code. The HS code 8505200030 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles".
- Check if any additional licenses, permits, or certificates are required to import "Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles" is 8505200030 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 85 was selected for electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 05 refers to Electromagnets; permanent magnets and articles intended to become permanent magnets after magnetisation; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads.
3. Subheading
The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 20 refers to Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles.
HS Code tree structure
8500000000 80
Chapter ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
8505000000 80
Electromagnets; permanent magnets and articles intended to become permanent magnets after magnetisation; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads
8505110000 10
- Permanent magnets and articles intended to become permanent magnets after magnetisation
8505110000 80
- - Of metal
8505111000 80
- - - Containing neodymium, praseodymium, dysprosium or samarium
8505111010 80
- - - - For use in certain types of aircraft
8505111020 10
- - - - Other
8505111020 80
- - - - - Articles, of an alloy of neodymium, in the shape of a rectangle, triangle, square, or trapezoid, -whether or not arched, -whether or not with rounded corners or oblique sides, -whether or not colour marked -whether or not coated or passivated with a surface treatment, -whether or not consisting of segments bonded together and electrically insulated from one another with: -a length of 9 mm or more, but not more than 105 mm, -a width of 5 mm or more, but not more than 105 mm, -a thickness of 2 mm or more, but not more than 55 mm intended to become permanent magnet after magnetisation
8505111023 80
- - - - - Bars in the form of arched rectangles, containing alloy containing neodymium, with: -a length of 15 mm or more but not more than 52 mm, -a width of 5 mm or more but not more than 42 mm, -whether or not coated or passivated with a surface treatment, intended to become permanent magnets after magnetisation
8505111028 80
- - - - - Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or collars: -with an external diameter of not more than 45 mm, -with a height of not more than 45 mm, -whether or not coated or passivated with a surface treatment, intended to become permanent magnets after magnetisation
8505111030 80
- - - - - Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or not rounded, whether or not coated or passivated with a surface treatment, with: -a rectangular or a trapezoidal cross-section, -a length of not more than 140 mm, -a width of not more than 90 mm and -a thickness of not more than 55 mm, or in the shape of an arched rectangle with: -a length of not more than 75 mm, -a width of not more than 40 mm, -a thickness of not more than 7 mm and -a radius of curvature of more than 86 mm but not more than 241 mm, -layers of nickel and copper or in the shape of a disc with: -a diameter of not more than 90 mm, -whether or not a hole in the centre
8505111035 80
- - - - - Article of an alloy of neodymium, in the shape of a disc, with: -a diameter of not more than 90 mm, -whether or not a hole in the centre, -layers of copper, nickel and/or zinc, intended to become permanent magnets after magnetisation
8505111074 80
- - - - - Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, - whether or not overmolded with polymers, - whether or not coated or passivated with a surface treatment, with: - a length of 5 mm or more, but not more than 60 mm, - a width of 5 mm or more, but not more than 40 mm, - a thickness of 3 mm or more, but not more than 15 mm, intended to become permanent magnets after magnetisation
8505111075 80
- - - - - A quarter sleeve intended to become permanent magnet after magnetization, - consisting of at least neodymium, iron and boron, - with a width of 9,1 mm or more but not more than 10,5 mm, - with a length of 20 mm or more but not more than 30,1 mm, of a kind used on rotors for the manufacture of fuel pumps
8505111076 80
- - - - - Articles of an alloy of neodymium, or an alloy of samarium, - whether or not coated or passivated with a surface treatment, - whether or not covered with zinc, - in the shape of rectangles, with: - a length of 13,8 mm or more but not more than 45,2 mm, - a width of 7,8 mm or more but not more than 25,2 mm, - a height of 1,3 mm or more but not more than 4,7 mm, intended to become permanent magnets after magnetisation
8505111077 80
- - - - - Article of an alloy of neodymium, in the form of arched rectangles, whether or not coated or passivated with a surface treatment, with: - a width of 9,1 mm or more but not more than 10,5 mm, - a length of 20 mm or more but not more than 30,1 mm, intended to become permanent magnets after magnetization
8505111078 80
- - - - - Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions: -a length of 200 mm or more but not more than 205 mm, -a width of 58 mm or more but not more than 62 mm, -a height of 25 mm or more but not more than 30 mm, with a stud mounted in the middle
8505111099 80
- - - - - Other
8505119000 80
- - - Other
8505119010 80
- - - - For use in certain types of aircraft
8505119074 10
- - - - Other
8505119074 80
- - - - - Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, - whether or not overmolded with polymers, - whether or not coated or passivated with a surface treatment, with: - a length of 5 mm or more, but not more than 60 mm, - a width of 5 mm or more, but not more than 40 mm, - a thickness of 3 mm or more, but not more than 15 mm, intended to become permanent magnets after magnetisation
8505119099 80
- - - - - Other
8505190000 80
- - Other
8505191000 80
- - - Permanent magnets of agglomerated ferrite
8505191010 80
- - - - For use in certain types of aircraft
8505191090 80
- - - - Other
8505199000 80
- - - Other
8505199010 80
- - - - For use in certain types of aircraft
8505199030 10
- - - - Other
8505199030 80
- - - - - Articles of agglomerated ferrite in the shape of a disc, whether or not coated or passivated with a surface treatment, with: - a diameter of not more than 120 mm, - a hole in the centre, intended to become permanent magnets after magnetisation with a remanence between 245 mT and 470 mT
8505199045 80
- - - - - Article of agglomerated ferrite in the shape of a rectangle, whether or not with oblique sides, with: -a length of 26,85 mm or more but not more than 32,15 mm, -a width of 7,6 mm or more but not more than 9,55 mm, -a thickness of 5,3 mm or more but not more than 5,8 mm, and -a weight of 6,1 g or more but not more than 8,3 g, intended to become a permanent magnet after magnetisation
8505199060 80
- - - - - Articles of agglomerated ferrite in the shape of arched rectangles, - whether or not coated or passivated with a surface treatment, - whether or not with rounded corners, with: - a length of 9 mm or more but not more than 101 mm, - a width of 9 mm or more but not more than 101 mm, - a thickness of 1,85 mm or more but not more than 15,15 mm, intended to become permanent magnets after magnetisation
8505199074 80
- - - - - Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, - whether or not overmolded with polymers, - whether or not coated or passivated with a surface treatment, with: - a length of 5 mm or more, but not more than 60 mm, - a width of 5 mm or more, but not more than 40 mm, - a thickness of 3 mm or more, but not more than 15 mm, intended to become permanent magnets after magnetisation
8505199089 80
- - - - - Other
8505200000 80
- Electromagnetic couplings, clutches and brakes
8505200010 80
- - For use in certain types of aircraft
8505200030 80
- - Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles
8505200040 80
- - Electromagnetic clutch: -transmitting torque from the motor shaft to the cutting device pulley, -containing field coil, rotor, hub and armature, -with an operating voltage of 12 V -a current of 3,93 A current or more but not more than 6,86 A, -a resistance of 1,84 ohm or more but not more than 3,05 ohm (operating at 20 °C), -a static torque of 108 Nm or more but not more than 305 Nm for use in the manufacture of rider type self-propelled mowers
8505200090 80
- - Other
8505900000 80
- Other, including parts
8505902100 10
- - Electromagnets; electromagnetic or permanent magnet chucks, clamps and similar holding devices
8505902100 80
- - - Electromagnets of a kind used solely or principally for magnetic resonance imaging apparatus other than electromagnets of heading 9018
8505902900 80
- - - Other
8505902910 80
- - - - For use in certain types of aircraft
8505902999 80
- - - - Other
8505905000 80
- - Electromagnetic lifting heads
8505905010 80
- - - For use in certain types of aircraft
8505905090 80
- - - Other
8505909000 80
- - Parts
8505909010 80
- - - For use in certain types of aircraft
8505909020 80
- - - Electromagnetic clutch coil in a cylindrical metal housing - the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE, - the coil is made of copper wire, - with a weight of 0,4kg or more but not more than 0,85kg, - with a width of 20mm or more but not more than 45mm, - with a plate reinforced to the coil (coil backplate) with an internal diameter of 44mm or more but not more than 46mm, - with an external diameter of 87mm or more but not more than 110mm, - without plunger, - with one connector
8505909090 80
- - - Other