New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 8507000000 80 - Electric accumulators, including separators therefor, whether or not rectangular (including square)

Email me changes

Import trade restrictions for 8507000000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 66
BA
Bosnia and Herzegovina BA
01-01-2009
0 %
Tariff preference 142
MK
North Macedonia MK
01-01-2009
0 %
Tariff preference 142
UA
Ukraine UA
01-01-2016
0 %
Tariff preference 142
2020
GSP - General arrangements 2020
01-01-2023
0 %
Tariff preference 142
SG
Singapore SG
01-01-2027
0 %
Tariff preference 142
XS
Serbia XS
01-02-2010
0 %
Tariff preference 142
PE
Peru PE
01-03-2013
0 %
Tariff preference 142
AL
Albania AL
01-04-2009
0 %
Tariff preference 142
XK
Kosovo XK
01-04-2016
0 %
Tariff preference 142
ME
Montenegro ME
01-05-2010
0 %
Tariff preference 142
NZ
New Zealand NZ
01-05-2024
0 %
Tariff preference 142
5500
Mercosur 5500
01-05-2026
0 %
Tariff preference 142
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
VN
Viet Nam VN
01-08-2020
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Airworthiness tariff suspension 119
CA
Canada CA
21-09-2017
0 %
Tariff preference 142
1006
EU-Canada agreement: re-imported goods 1006
21-09-2017
0 %
Tariff preference 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Tariff preference 142
CH
Switzerland CH
01-01-1988
0 %
Tariff preference 142
FO
Faroe Islands FO
01-01-1997
0 %
Tariff preference 142
XL
Melilla XL
01-01-1999
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Tariff preference 142
SM
San Marino SM
01-01-2006
0 %
Customs union duty 106
TR
Türkiye TR
01-01-2006
0 %
Customs union duty 106
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Tariff preference 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
EC
Ecuador EC
01-01-2017
0 %
Tariff preference 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
XC
Ceuta XC
01-07-1991
0 %
Accession act0001/85
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
SY
Syria SY
01-08-1994
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
GE
Georgia GE
01-09-2014
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
ZA
South Africa ZA
10-10-2016
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Import prohibition 277
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 2
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 8507000000

  • Customs value €1,000.00
  • No third-country duty is recorded for this origin.
  • Import VAT 19 % €190.00
  • Total €1,190.00

May be lower under conditions:

  • Airworthiness tariff suspension: 0 %

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 8507000000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Measures 1
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Export prohibition 278
Controls and documents 3
BY
Belarus BY
01-07-2024
Document required
banned without it
Export control 709
UA
Ukraine UA
25-02-2025
Document required
banned without it
Export control 709
UA
Ukraine UA
25-08-2022
Document required
banned without it
Export control 767

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 8507000000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chile

    EU-Algeria Association Agreement · Algeria

    EU-Egypt Association Agreement · Egypt

    EU-Jordan Association Agreement · Jordan

    EU-Morocco Association Agreement · Morocco

    EU-Tunisia Association Agreement · Tunisia

    Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan

    Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 60 per cent of the ex-works price of the product

  • EPA CARIFORUM

    Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: / or: Manufacture in which – all the materials used are classified within a heading other than that of the product; – the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU-Japan EPA · Japan

    CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Korea FTA · South Korea

    Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 45 % of the ex-works price of the product

  • EU-Lebanon Association Agreement · Lebanon

    Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: / or: Manufacture: from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU-Mexico Global Agreement · Mexico

    Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product, the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 40% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product

  • EU-Singapore FTA · Singapore

    Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product

  • EU-Viet Nam FTA · Vietnam

    Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: / or: Manufacture from materials of any heading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 8507000000

8507 20 20 CN Explanatory Notes: and 8507 20 80

Other lead-acid accumulators With the exception of accumulators of a kind used for starting piston engines (see subheadings 8507 10 20 and 8507 10 80), these subheadings cover the electric lead-acid accumulators mentioned in the HS Explanatory Note to heading 8507, third paragraph, (1). These accumulators are used, for example, for driving electric vehicles and for supplying power to telecommunication installations.

8507 20 80 CN Explanatory Notes: and 8507 20 80

Other lead-acid accumulators With the exception of accumulators of a kind used for starting piston engines (see subheadings 8507 10 20 and 8507 10 80), these subheadings cover the electric lead-acid accumulators mentioned in the HS Explanatory Note to heading 8507, third paragraph, (1). These accumulators are used, for example, for driving electric vehicles and for supplying power to telecommunication installations.

8507 30 20 CN Explanatory Notes: and 8507 30 80

Nickel-cadmium The accumulators of these subheadings are used particularly in safety lamps for miners and often as replacements for dry batteries in equipment such as portable radios, television sets, electric razors and other electrical equipment.

8507 30 80 CN Explanatory Notes: and 8507 30 80

Nickel-cadmium The accumulators of these subheadings are used particularly in safety lamps for miners and often as replacements for dry batteries in equipment such as portable radios, television sets, electric razors and other electrical equipment.

8507 80 00 CN Explanatory Notes: Other accumulators

This subheading includes silver-zinc and silver-cadmium accumulators.

8507 90 30 CN Explanatory Notes: and 8507 90 80

Parts These subheadings do not include connecting parts of accumulator elements (subheading 8536 90 95).

8507 90 31 CN Explanatory Notes: Separators of plastic film of a thickness not exceeding 40 micrometres

This subheading includes separator films of a thickness not exceeding 40 micrometres, which are presented in rolls. These films are specifically designed for use in lithium-ion accumulators to separate the anode and cathode, allowing for the safe flow of ions during charging and discharging processes. Additionally, the separator films have a crucial role in preventing short circuits within the accumulator. These separators are flexible and are typically white or translucent in appearance, with a width precisely tailored to the respective accumulators. The thickness of these films generally ranges from 5 to 25 micrometres, but not exceeding 40 micrometres. They are usually made of polyolefin-based semi-crystalline polymers, such as polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), or polyamides (e.g., nylon). The separator films may be either monolayer or multilayer, with the latter often featuring a PP/PE/PP tri-layer structure. Some films are optionally coated with ceramic particles (e.g., high-purity aluminium oxide or titanium oxide) or polymers like PVDF, or non-woven fabrics. After cutting to the final length (which is determined during the manufacturing process), the articles are ready for use as separator films in lithium-ion accumulators. The films are cut to the appropriate length on-site in the same production line where the accumulators are produced, using specialized machinery that feed in the rolls and cut them according to precise specifications.

8507 90 80 CN Explanatory Notes: and 8507 90 80

Parts These subheadings do not include connecting parts of accumulator elements (subheading 8536 90 95).

Notes to chapter 85

Notes 1. This chapter does not cover: (a) electrically warmed blankets, bed pads, foot-muffs or the like; electrically warmed clothing, footwear or ear pads or other electrically warmed articles worn on or about the person; (b) articles of glass of heading 7011; (c) machines and apparatus of heading 8486; (d) vacuum apparatus of a kind used in medical, surgical, dental or veterinary science (heading 9018); or (e) electrically heated furniture of Chapter 94. 2. Headings 8501 to 8504 do not apply to goods described in heading 8511, 8512, 8540, 8541 or 8542. However, metal tank mercury arc rectifiers remain classified in heading 8504. 3. For the purposes of heading 8507, the expression ‘electric accumulators’ includes those presented with ancillary components which contribute to the accumulator’s function of storing and supplying energy or protect it from damage, such as electrical connectors, temperature control devices (e.g., thermistors) and circuit protection devices. They may also include a portion of the protective housing of the goods in which they are to be used. 4. Heading 8509 covers only the following electromechanical machines of the kind commonly used for domestic purposes: (a) floor polishers, food grinders and mixers, and fruit or vegetable juice extractors, of any weight; (b) other machines provided the weight of such machines does not exceed 20 kg. The heading does not, however, apply to fans or ventilating or recycling hoods incorporating a fan, whether or not fitted with filters (heading 8414), centrifugal clothes-dryers (heading 8421), dishwashing machines (heading 8422), household washing machines (heading 8450), roller or other ironing machines (heading 8420 or 8451), sewing machines (heading 8452), electric scissors (heading 8467) or to electrothermic appliances (heading 8516). 5. For the purposes of heading 8517, the term ‘smartphones’ means telephones for cellular networks, equipped with a mobile operating system designed to perform the functions of an automatic data processing machine such as downloading and running multiple applications simultaneously, including third-party applications, and whether or not integrating other features such as digital cameras and navigational aid systems. 6. For the purposes of heading 8523 : (a) ‘solid-state non-volatile storage devices’ (for example, ‘flash memory cards’ or ‘flash electronic storage cards’) are storage devices with a connecting socket, comprising in the same housing one or more flash memories (for example, ‘Flash E2PROM’) in the form of integrated circuits mounted on a printed circuit board. They may include a controller in the form of an integrated circuit and discrete passive components, such as capacitors and resistors; (b) the term ‘smart cards’ means cards which have embedded in them one or more electronic integrated circuits (a microprocessor, random access memory (RAM) or read-only memory (ROM)) in the form of chips. These cards may contain contacts, a magnetic stripe or an embedded antenna but do not contain any other active or passive circuit elements. 7. For the purposes of heading 8524, ‘flat panel display modules’ refer to devices or apparatus for the display of information, equipped at a minimum with a display screen, which are designed to be incorporated into articles of other headings prior to use. Display screens for flat panel display modules include, but are not limited to, those which are flat, curved, flexible, foldable or stretchable in form. Flat panel display modules may incorporate additional elements, including those necessary for receiving video signals and the allocation of those signals to pixels on the display. However, heading 8524 does not include display modules which are equipped with components for converting video signals (e.g., a scaler IC, decoder IC or application processer) or have otherwise assumed the character of goods of other headings. For the classification of flat panel display modules defined in this note, heading 8524 shall take precedence over any other heading in the nomenclature. 8. For the purposes of heading 8534, ‘printed circuits’ are circuits obtained by forming on an insulating base, by any printing process (for example, embossing, plating-up, etching) or by the ‘film circuit’ technique, conductor elements, contacts or other printed components (for example, inductances, resistors, capacitors) alone or interconnected according to a pre-established pattern, other than elements which can produce, rectify, modulate or amplify an electrical signal (for example, semiconductor elements). The expression ‘printed circuits’ does not cover circuits combined with elements other than those obtained during the printing process, nor does it cover individual, discrete resistors, capacitors or inductances. Printed circuits may, however, be fitted with non-printed connecting elements. Thin- or thick-film circuits comprising passive and active elements obtained during the same technological process are to be classified in heading 8542. 9. For the purpose of heading 8536, ‘connectors for optical fibres, optical-fibre bundles or cables’ means connectors that simply mechanically align optical fibres end to end in a digital line system. They perform no other function, such as the amplification, regeneration or modification of a signal. 10. Heading 8537 does not include cordless infrared devices for the remote control of television receivers or other electrical equipment (heading 8543). 11. For the purposes of heading 8539, the expression ‘light-emitting diode (LED) light sources’ covers: (a) ‘light-emitting diode (LED) modules’ which are electrical light sources based on light-emitting diodes (LED) arranged in electrical circuits and containing further elements like electrical, mechanical, thermal or optical elements. They also contain discrete active elements, discrete passive elements, or articles of heading 8536 or 8542 for the purposes of providing power supply or power control. Light-emitting diode (LED) modules do not have a cap designed to allow easy installation or replacement in a luminaire and ensure mechanical and electrical contact; (b) ‘light-emitting diode (LED) lamps’ which are electrical light sources containing one or more LED modules containing further elements like electrical, mechanical, thermal or optical elements. The distinction between light-emitting diode (LED) modules and light-emitting diode (LED) lamps is that lamps have a cap designed to allow easy installation or replacement in a luminaire and ensure mechanical and electrical contact. 12. For the purposes of headings 8541 and 8542 : (a) (i) ‘Semiconductor devices’ are semiconductor devices the operation of which depends on variations in resistivity on the application of an electric field or semiconductor-based transducers. Semiconductor devices may also include assembly of plural elements, whether or not equipped with active and passive device ancillary functions. ‘Semiconductor-based transducers’ are, for the purposes of this definition, semiconductor-based sensors, semiconductor-based actuators, semiconductor-based resonators and semiconductor-based oscillators, which are types of discrete semiconductor-based devices, which perform an intrinsic function, which are able to convert any kind of physical or chemical phenomena or an action into an electrical signal or an electrical signal into any type of physical phenomenon or an action. All the elements in semiconductor-based transducers are indivisibly combined, and may also include necessary materials indivisibly attached, that enable their construction or function. The following expressions mean: (1) ‘Semiconductor-based’ means built or manufactured on a semiconductor substrate or made of semiconductor materials, manufactured by semiconductor technology, in which the semiconductor substrate or material plays a critical and unreplaceable role of transducer function and performance, and the operation of which is based on semiconductor properties including physical, electrical, chemical and optical properties. (2) ‘Physical or chemical phenomena’ relate to phenomena, such as pressure, acoustic waves, acceleration, vibration, movement, orientation, strain, magnetic field strength, electric field strength, light, radioactivity, humidity, flow, chemicals concentration, etc. (3) ‘Semiconductor-based sensor’ is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of detecting physical or chemical quantities and converting these into electric signals caused by resulting variations in electric properties or displacement of a mechanical structure. (4) ‘Semiconductor-based actuator’ is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of converting electric signals into physical movement. (5) ‘Semiconductor-based resonator’ is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures in response to an external input. (6) ‘Semiconductor-based oscillator’ is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures. (ii) ‘Light-emitting diodes (LED)’ are semiconductor devices based on semiconductor materials which convert electrical energy into visible, infra-red or ultra-violet rays, whether or not electrically connected among each other and whether or not combined with protective diodes. Light-emitting diodes (LED) of heading 8541 do not incorporate elements for the purposes of providing power supply or power control; (b) ‘Electronic integrated circuits’ are: (1) monolithic integrated circuits in which the circuit elements (diodes, transistors, resistors, capacitors, inductances, etc.) are created in the mass (essentially) and on the surface of a semiconductor or compound semiconductor material (for example, doped silicon, gallium arsenide, silicon germanium, indium phosphide) and are inseparably associated; (2) hybrid integrated circuits in which passive elements (resistors, capacitors, inductances, etc.), obtained by thin- or thick-film technology, and active elements (diodes, transistors, monolithic integrated circuits, etc.), obtained by semiconductor technology, are combined to all intents and purposes indivisibly, by interconnections or interconnecting cables, on a single insulating substrate (glass, ceramic, etc.). These circuits may also include discrete components; (3) multichip integrated circuits consisting of two or more interconnected monolithic integrated circuits combined to all intents and purposes indivisibly, whether or not on one or more insulating substrates, with or without leadframes, but with no other active or passive circuit elements; (4) multi-component integrated circuits (MCOs) : a combination of one or more monolithic, hybrid, or multi-chip integrated circuits with at least one of the following components : silicon-based sensors, actuators, oscillators, resonators or combinations thereof, or components performing the functions of articles classifiable under heading 8532, 8533, 8541, or inductors classifiable under heading 8504, formed to all intents and purposes indivisibly into a single body like an integrated circuit, as a component of a kind used for assembly onto a printed circuit board (PCB) or other carrier, through the connecting of pins, leads, balls, lands, bumps, or pads. For the purpose of this definition : (1) ‘Components’ may be discrete, manufactured independently then assembled onto the rest of the MCO, or integrated into other components. (2) ‘Silicon based’ means built on a silicon substrate, or made of silicon materials, or manufactured onto integrated circuit die. (3) (a) ‘Silicon based sensors’ consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of detecting physical or chemical phenomena and transducing these into electric signals, caused by resulting variations in electric properties or displacement of a mechanical structure. ‘Physical or chemical phenomena’ relates to phenomena, such as pressure, acoustic waves, acceleration, vibration, movement, orientation, strain, magnetic field strength, electric field strength, light, radioactivity, humidity, flow, chemicals concentration, etc. (b) ‘Silicon based actuators’ consist of microelectronic and mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of converting electrical signals into physical movement. (c) ‘Silicon based resonators’ are components that consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures in response to an external input. (d) ‘Silicon based oscillators’ are active components that consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures. For the classification of the articles defined in this note, headings 8541 and 8542 shall take precedence over any other heading in the nomenclature, except in the case of heading 8523, which might cover them by reference to, in particular, their function. Subheading notes 1. Subheading 8525 81 covers only high-speed television cameras, digital cameras and video camera recorders having one or more of the following characteristics: - writing speed exceeding 0,5 mm per microsecond; - time resolution 50 nanoseconds or less; - frame rate exceeding 225 000 frames per second. 2. In respect of subheading 8525 82, radiation-hardened or radiation-tolerant television cameras, digital cameras and video camera recorders are designed or shielded to enable operation in a high-radiation environment. These cameras are designed to withstand a total radiation dose of at least 50 × 103 Gy(silicon) (5 × 106 RAD (silicon)), without operational degradation. 3. Subheading 8525 83 covers night vision television cameras, digital cameras and video camera recorders which use a photocathode to convert available light to electrons, which can be amplified and converted to yield a visible image. This subheading excludes thermal imaging cameras (generally subheading 8525 89). 4. Subheading 8527 12 covers only cassette-players with built-in amplifier, without built-in loudspeaker, capable of operating without an external source of electric power and the dimensions of which do not exceed 170 mm × 100 mm × 45 mm. 5. For the purposes of subheadings 8549 11 to 8549 19, ‘spent primary cells, spent primary batteries and spent electric accumulators’ are those which are neither usable as such because of breakage, cutting-up, wear or other reasons, nor capable of being recharged. Additional note 1. Subheadings 8519 20 10 and 8519 30 00 are to be taken not to apply to sound reproducing apparatus with laser reading system.

Notes to section XVI

MACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES Notes 1. This section does not cover: (a) transmission or conveyor belts or belting, of plastics of Chapter 39, or of vulcanised rubber (heading 4010), or other articles of a kind used in machinery or mechanical or electrical appliances or for other technical uses, of vulcanised rubber other than hard rubber (heading 4016); (b) articles of leather or of composition leather (heading 4205) or of furskin (heading 4303), of a kind used in machinery or mechanical appliances or for other technical uses; (c) bobbins, spools, cops, cones, cores, reels or similar supports, of any material (for example, Chapter 39, 40, 44 or 48 or Section XV); (d) perforated cards for jacquard or similar machines (for example, Chapter 39 or 48 or Section XV); (e) transmission or conveyor belts or belting, of textile material (heading 5910) or other articles of textile material for technical uses (heading 5911); (f) precious or semi-precious stones (natural, synthetic or reconstructed) of headings 7102 to 7104, or articles wholly of such stones of heading 7116, except unmounted worked sapphires and diamonds for styli (heading 8522); (g) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39); (h) drill pipe (heading 7304); (ij) endless belts of metal wire or strip (Section XV); (k) articles of Chapter 82 or 83; (l) articles of Section XVII; (m) articles of Chapter 90; (n) clocks, watches or other articles of Chapter 91; (o) interchangeable tools of heading 8207 or brushes of a kind used as parts of machines (heading 9603); similar interchangeable tools are to be classified according to the constituent material of their working part (for example, in Chapter 40, 42, 43, 45 or 59 or heading 6804 or 6909); (p) articles of Chapter 95; or (q) typewriter or similar ribbons, whether or not on spools or in cartridges (classified according to their constituent material, or in heading 9612 if inked or otherwise prepared for giving impressions), or monopods, bipods, tripods and similar articles, of heading 9620. 2. Subject to note 1 to this section, note 1 to Chapter 84 and note 1 to Chapter 85, parts of machines (not being parts of the articles of heading 8484, 8544, 8545, 8546 or 8547) are to be classified according to the following rules: (a) Parts which are goods included in any of the headings of Chapter 84 or 85 (other than headings 8409, 8431, 8448, 8466, 8473, 8487, 8503, 8522, 8529, 8538 and 8548) are in all cases to be classified in their respective headings. (b) Other parts, if suitable for use solely or principally with a particular kind of machine, or with a number of machines of the same heading (including a machine of heading 8479 or 8543) are to be classified with the machines of that kind or in heading 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 or 8538 as appropriate. However, parts which are equally suitable for use principally with the goods of headings 8517 and 8525 to 8528 are to be classified in heading 8517, and parts which are suitable for use solely or principally with the goods of heading 8524 are to be classified in heading 8529; (c) All other parts are to be classified in heading 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 or 8538 as appropriate or, failing that, in heading 8487 or 8548. 3. Unless the context otherwise requires, composite machines consisting of two or more machines fitted together to form a whole and other machines designed for the purpose of performing two or more complementary or alternative functions are to be classified as if consisting only of that component or as being that machine which performs the principal function. 4. Where a machine (including a combination of machines) consists of individual components (whether separate or interconnected by piping, by transmission devices, by electric cables or by other devices) intended to contribute together to a clearly defined function covered by one of the headings in Chapter 84 or 85, then the whole falls to be classified in the heading appropriate to that function. 5. For the purposes of these notes, the expression ‘machine’ means any machine, machinery, plant, equipment, apparatus or appliance cited in the headings of Chapter 84 or 85. 6. (A) Throughout the nomenclature, the expression ‘electrical and electronic waste and scrap’ means electrical and electronic assemblies, printed circuit boards, and electrical or electronic articles that: (a) have been rendered unusable for their original purposes by breakage, cutting-up or other processes or are economically unsuitable for repair, refurbishment or renovation to render them fit for their original purposes; and (b) are packaged or shipped in a manner not intended to protect individual articles from damage during transportation, loading and unloading operations. (B) Mixed consignments of ‘electrical and electronic waste and scrap’ and other waste and scrap are to be classified in heading 8549. (C) This section does not cover municipal waste, as defined in note 4 to Chapter 38. Additional notes 1. Tools necessary for the assembly or maintenance of machines are to be classified with those machines if imported with them. Interchangeable tools imported with machines are also to be classified therewith if they form part of the normal equipment of the machines and are normally sold with them. 2. Should the customs so require, the declarant shall produce, in support of his declaration, an illustrated document (for example, instructions, prospectus, a page from a catalogue, a photograph) giving the normal description of the machine, its uses and essential characteristics and, in respect of an unassembled or disassembled machine, an assembly plan and a list of the contents of the various packages. 3. The provisions of general rule 2(a) are also applicable, at the request of the declarant and subject to conditions stipulated by the competent authorities, to machines imported in split consignments.

Other explanatory notes for the chapter

Additional note 2 The explanatory note to additional note 3 to section XVI applies, mutatis mutandis.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

UK advance tariff rulings for 8507000000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 8507208010 Valid Jul 2, 2026 to Jul 1, 2029 · Ruling 600015749 on GOV.UK

    A self‑contained aircraft emergency power supply unit (EPS) incorporating rechargeable lead-acid batteries which contain an immobilised electrolyte and self-resealing release valves. The power unit has integrated control electronics. It provides temporary DC power (24 V DC output ~5 A / ~150 W output capability) to essential flight instruments (e.g. standby attitude indicators) if the aircraft’s main electrical supply is lost. Under normal operation, the EPS batteries are charged by the aircraft electrical system. If there is a loss in power supply, the unit automatically switches to battery power with no interruption. The EPS does not perform detection, communication, or signalling functions. Its role is strictly to act as a backup electrical power source for safety‑critical instruments. Dimensions are 14.110" (L) x 7.774" (H) x 2.400" (W) and weighs 13lbs.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8507 - Electric accumulators, including separators therefor, whether or not rectangular (including square). GIR 6 - has been used to classify the goods to subheading level 850720 - Other lead-acid accumulators. 8-digit code 85072080 - Other than working with liquid electrolyte. 10-digit code 8507208010 - For use in civil aircraft. Also classified in accordance with: Harmonized System Explanatory Notes (HSEN) to Section XVI - Note 2 (a). Harmonized System Explanatory Notes (HSEN) to Chapter 85 - Note 3 and General Note (A) (1). Harmonized System …

  • UK 8507500090 Valid Apr 20, 2026 to Apr 19, 2029 · Ruling 600015031 on GOV.UK

    The kit can an be used with wireless controllers for gaming consoles. The kit includes a 10-foot cable to play with the controllers while charging, 2 rechargeable 1200maH Ni-MH battery packs and 4 ABS plastic battery door covers. The kit enables 20 hours of gameplay per charge. The kit is also compatible with other charging systems which are sold separately. The batteries have LED indicator lights that move while charging and show a solid colour when fully charged.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR 1 has been used to classify this product by the terms of heading 8507 – Electric accumulators, including separators therefor, whether or not rectangular (including square). GIR 3(b) has been used as the Nickel-metal hydride batteries are considered to be the essential character. GIR 6 has been used to classify the goods to sub-heading 850750 – Nickel-metal hydride. 10 digit code 8507500090 – Other than for use in civil aircraft. Also classified in accordance with :- Note 3 to Chapter 85 Harmonised Standard Explanatory Notes (HSENs) to heading 8507.

  • UK 8507600090 Valid Feb 28, 2024 to Feb 27, 2027 · Ruling 600009921 on GOV.UK

    Battery (Power Bank) that is use to recharge devices such us smartphones, tablets etc. It consists of a lithium ion battery in a plastic enclosure, has two USB ports for charging devices and two input ports USB type A & C to charge the power bank. Battery capacity is 10000 Milliamp and output voltage of 5v. Measurements Width 102.6 mm Height 25.1 mm Weight 261.0 g

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - has been used to classify this product by the terms of heading 8507 - Electric accumulators, including separators therefor, whether or not rectangular (including square) GIR 6 - has been used to classify the goods to subheading level 850760 - Lithium-ion 10 Digit Code 8507600090 - other than elsewhere specified Also classified in accordance with :- General Note (1) to Chapter 85 Harmonised Standard Explanatory Notes (HSENs) to heading 8507

+ 12 more
  • UK 8507600090 Valid Apr 14, 2024 to Apr 13, 2027 · Ruling 600010142 on GOV.UK

    Portable power bank that are used to recharge a number of different devices such as mobile phones. It consists of a lithium ion battery in a plastic enclosure complete with USB ports for charging. 11 cm x 8.30 cm x 3.30, with a weight of 306 g.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - has been used to classify this product by the terms of heading 8507 - Electric accumulators, including separators therefor, whether or not rectangular (including square) GIR 3B has been used as the charging function gives the product its essential character GIR 6 - has been used to classify the goods to subheading level 850760 - Lithium-ion 10 Digit Code 8507600090 - other than elsewhere specified in this subheading Also classified in accordance with :- Note 4 to Section XVI Harmonised Standard Explanatory Notes (HSENs) to heading 8507

  • UK 8507600090 Valid Dec 4, 2024 to Dec 3, 2027 · Ruling 600011787 on GOV.UK

    A containerised battery energy storage system (BESS) complete with Lithium Iron (LFP) batteries, inverters, HVAC, fire detection, suppression and battery management system. The battery storage system will be connected in parallel with the electricity distribution system and will be used for electricity balancing services, importing power during periods of low demand and exporting power during periods of high demand.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRS): GIR 1 - has been used to classify this product by the terms of Heading 8507 - Electric accumulators, including separators therefor, whether or not rectangular (including square). GIR 5b has been used to identify the type of packaging - 5 items are packaged in a plastic bag, 100 items are packaged in a cardboard box. GIR 6 has been used to classify the goods to subheading level 850760 - Lithium-ion. 8 Digit Code 8507600090 - Other than elsewhere specified. Also classified in accordance with: Chapter Notes 3 to Chapter 85 The Harmonized System Explanatory Notes (HSENs) to Heading 8507

  • UK 8507600090 Valid Jan 15, 2025 to Jan 14, 2028 · Ruling 600012135 on GOV.UK

    The product is a battery power bank that you can use to recharge devices such as smartphones and tablets. It product consists of a lithium-ion battery in a plastic enclosure with two USB ports for charging devices and two input ports USB type A & C to charge the power bank. Battery capacity is 10,000 milliamp per hour and output voltage of 5v. Measurements: width - 102.6 mm, height - 25.1 mm & weight - 261.0g.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - has been used to classify this product by the terms of heading 8507 - Electric accumulators, including separators therefor, whether or not rectangular (including square) GIR 6 - has been used to classify the goods to subheading level 850760 - Lithium-ion 10 Digit Code 8507600090 - other than elsewhere specified Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) to heading 8507

  • UK 8507600090 Valid May 15, 2025 to May 14, 2028 · Ruling 600013052 on GOV.UK

    A power bank that you can use to recharge devices such as smartphones and tablets. The product consists of a lithium-ion battery in a plastic enclosure with two USB ports for charging devices and two input ports USB type A& C to charge the power bank. Battery capacity is 10,000milliamp per hour and output voltage of 5v. Measurements: width- 102.6 mm, Height - 25.1 mm & weight - 261.0g.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs) GIR 1 has been used to classify this product by the terms of heading 8507 - Electric accumulators, including separators therefor, whether or not rectangular (including square) GIR 6 has been used to classify the goods to subheading level 850760 - Lithium-ion 10 Digit Code 8507600090 - other than elsewhere specified Also classified in accordance with : General Note (1) to Chapter 85 Harmonised Standard Explanatory Notes (HSENs) to heading 8507

  • UK 8507600090 Valid May 27, 2025 to May 26, 2028 · Ruling 600013063 on GOV.UK

    This product is the battery and device element that is to work with a prefilled pod that contains nicotine-containing e-liquid. This package contains one device in a sealed wrapper. (No prefilled Pods are supplied with this device.) When used with a replacement pod, this product is activated by the user placing the mouthpiece into their mouth and drawing on the same, this supplies power in order to heat the atomiser to convert the liquid to vapour for inhalation. There is a short circuit protection function which shuts down the device if it short-circuits or overheats. A charging cable is included in this package

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect :a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8507 - Electric accumulators, including separators therefor, whether or not rectangular (including square). GIR 3b has been used as the lithium accumulator is considered to be the essential character. GIR 6 has been used to classify the goods to subheading level 850760 - Lithium-ion. 10 Digit Code 8507600090 - Other than elsewhere specified. Also classified in accordance with: Section Note 2a to Section XVI Chapter Notes 3 to Chapter 85 Harmonized System Explanatory Notes (HSENs) Notes to Heading 8507

  • UK 8507600090 Valid May 27, 2025 to May 26, 2028 · Ruling 600013072 on GOV.UK

    This product is the battery and device element that is to work with a prefilled pod that contains nicotine-containing e-liquid. This package contains one device. When used with a prefilled pod, this product is activated by the user placing the mouthpiece into their mouth and drawing on the same, this then supplies power in order to heat the atomiser to convert the liquid to vapour for inhalation. A white LED light indicates the product is in use, a solid red LED indicates charging and the LED changes to green when fully charged. There is a short circuit protection function which shuts down the device if it short-circuits or overheats, and the device LED will flash several times to indicate this. This also occurs when the pod is depleted of liquid and requires replacing. A USB charging cable is supplied. To charge the device, remove the pod and insert the USB charger port into the device, align the grooves and connect the USB charger to a power source.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect :a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8507 - Electric accumulators, including separators therefor, whether or not rectangular (including square). GIR 3b has been used as the lithium accumulator is considered to be the essential character. GIR 6 has been used to classify the goods to subheading level 850760 - Lithium-ion. 10 Digit Code 8507600090 - Other than elsewhere specified. Also classified in accordance with: Section Note 2a to Section XVI Chapter Notes 3 to Chapter 85 Harmonized System Explanatory Notes (HSENs) Notes to Heading 8507

  • UK 8507600090 Valid Mar 10, 2026 to Mar 9, 2029 · Ruling 600014691 on GOV.UK

    A portable power bank that is used to recharge a number of different devices such as mobile phones. It consists of a lithium-ion battery in a plastic enclosure, complete with 2 USB ports for charging. There is a LED battery level indicator. The pictures of the power bank with the application show the power bank has a 20,000mAh capacity. It measures L 13.9cm x W 6.9cm x D 2.7cm. It is packaged within a cardboard box for retail sale.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8507: Electric accumulators, including separators therefor, whether or not rectangular (including square). GIR 5 (b) - Has been used to identify the type of packaging: retail cardboard box. GIR 6 - Has been used to classify the goods to subheading level 850760: Lithium-ion. 10 DIGIT CODE 8507600090: Other than elsewhere specified. Also classified in accordance with: Harmonised System Explanatory Notes (HSEN) to heading 8506 exclusion Harmonised System Explanatory Notes (HSEN) to heading 8507

  • UK 8507600090 Valid May 7, 2026 to May 6, 2029 · Ruling 600015493 on GOV.UK

    A modular, stackable residential energy storage system One inverter module Multiple 5 kWh Lithium Iron Phosphate (LiFePO4) battery modules that are stacked vertically on site (1 to 6 modules, giving 5–30 kWh nominal capacity) A separate Connection Hub (AC combiner and protection unit) The complete system is supplied as separate modules and assembled on site by stacking the battery modules on a wheeled base and placing the inverter module on top How it works: The primary function is off peak - greener energy storage. The system charges from the UK mains electricity at cheap off-peak or time-of-use night rates, stores the energy in the LiFePO4 battery modules, and discharges it during higher daytime rates to power the household. It also provides backup power during grid outages. The system has no grid-export capability — it cannot send electricity back to the public distribution network. It is designed exclusively for residential use as an energy-saving material. It can accept optional solar PV input but functions primarily as a grid-charged storage and backup device. Installation (including stacking) is carried out by a qualified independent electrician. The system is supplied in multiple separate packages suitable for international container shipping: one package for the inverter module (including installation kit and accessories), individual packages for each battery module, and one package for the Connection Hub. All components are packed with protective foam and crating for safe transport.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8507: Electric accumulators, including separators therefor, whether or not rectangular (including square). GIR 5 (b) - Has been used to identify the type of packaging GIR 6 - Has been used to classify the goods to subheading level 850760: Lithium-ion. 10 Digit Code 8507600090: Other than elsewhere specified. Also classified in accordance with: General Note (1) to Chapter 85 Harmonised System Explanatory Notes (HSEN) to heading 8507

  • UK 8507600090 Valid Jul 27, 2026 to Jul 26, 2029 · Ruling 600016046 on GOV.UK

    Battery Energy Storage System Lithium-battery energy storage system, enabling bidirectional conversion between electrical energy and chemical energy. At the core of the lithium-battery energy storage system is the storage, release, and intelligent regulation of electrical energy, while ensuring full-process safety. It adapts to the power demands of power grids, new energy sources, and loads, and includes a built-in HVAC system. WxDxH (6058*2438*2896mm) Weight 43950kg

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 8507: Electric accumulators, including separators therefor, whether or not rectangular (including square) GIR 3b has been used as the storage battery is considered to be the essential character. GIR 6 has been used to classify the goods to subheading level 850760: Lithium-ion 10 Digit code 8507600090: Other than elsewhere specified Also classified in accordance with: Section Note 3 to Section XVI Chapter Note 3 to Chapter 85 Harmonized System Explanatory Note (HSEN's) to heading 85.07

  • UK 8507908090 Valid Apr 24, 2024 to Apr 23, 2027 · Ruling 600010365 on GOV.UK

    The Terminal Strip 'aluminium profile' does not carry current, it is purely mechanical not electrical The terminal strip clamps the cell module to the housing using four screw connections. The terminal strip has holes into which hole clips are inserted for cable fastening. • The terminal strip is specially developed for the SE16 high-voltage battery. • The terminal strip clamps the cell module to the housing using four screw connections. • The terminal strip has holes into which hole clips are inserted for cable fastening. • The terminal strip is manufactured from aluminium extrusion with subsequent mechanical processing. • The terminal strip is made of AlMgSi-LY according to BMW WS02002. • The flat 22mm terminal strip is a simple mechanical component that does not carry current. It is packaged in a plastic bag with 10 parts per foam sheet. This is then packaged further in a cardboard box.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (Gir)'s Gir 1 has been used to classify this product by the terms of heading 8507 electric accumulators, including separators therefor, whether or not rectangular (including square) Gir 5 (b) has been used to identify the type of packaging. Gir 6 has been used to classify the goods to subheading level 850790 parts Eight digit code 85079080 other than separators Ten digit code 8507908090 other than for use in civil aircraft. Other than elsewhere specified in this chapter Also classified in accordance with: Harmonized System Explanatory Notes (HSEN) Note 2 to XVI General Notes and Heading 8507 refers (parts)

  • UK 8507908090 Valid Jul 11, 2024 to Jul 10, 2027 · Ruling 600010760 on GOV.UK

    The Product is a partially complete vanadium flow battery (non functional, essentially it is a part of a battery) The individual parts that make up the battery are assembled at a contract manufacturer; these will be shipped in a container. The flow battery comprises of: • Rigid metal outer packaging (Integrated 20FT ISO certified container), which is part of the battery.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (Gir)'s Gir 1 has been used to classify this product by the terms of heading 8507 electric accumulators, including separators therefor, whether or not rectangular (including square) Gir 5 (b) has been used to identify the type of packaging. Gir 6 has been used to classify the goods to subheading level 850790 parts Eight digit code 85079080 other than separators Ten digit code 8507908090 other than for use in civil aircraft - Other than elsewhere specified in this chapter Also to Note 2 to Section XVI Harmonized System Explanatory Notes (HSEN) to Heading 8507 (parts)

  • UK 8507908090 Valid Oct 28, 2024 to Oct 27, 2027 · Ruling 600011653 on GOV.UK

    The Aluminium Battery Housing is used to house battery cells and is used in electricity powered passenger vehicles. It is made from High Strength Aluminium Alloy. The manufacturing process includes extrusion, machining and welding. The housing is used to hold multiple battery cells.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (Gir)'s GIR 1 has been used to classify this product by the terms of heading 8507 electric accumulators, including separators therefor, whether or not rectangular (including square) GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 850790 parts 8 digit code 85079080 other than separators 10 digit code 8507908090 other than for use in civil aircraft. Other than elsewhere specified in this chapter Also classified in accordance with: Note 2b to Section XVI Harmonized System Explanatory Notes (HSEN) (parts) to 8507

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 8507000000

  • Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 8507

    Art. 3k, goods contributing to Russian industrial capacity

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 % maybe 3 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 850700 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Electric accumulators, including separators therefor, whether or not rectangular (including square)", it is crucial to have the correct HS code or TARIC code. The HS code 8507000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Electric accumulators, including separators therefor, whether or not rectangular (including square)", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Electric accumulators, including separators therefor, whether or not rectangular (including square)".
  2. Check if any additional licenses, permits, or certificates are required to import "Electric accumulators, including separators therefor, whether or not rectangular (including square)" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Electric accumulators, including separators therefor, whether or not rectangular (including square)" is 8507000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Electric accumulators, including separators therefor, whether or not rectangular (including square)".

HS Code structure

85
Chapter
07
Heading
00
Subheading
00
CN Subheading
00
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 85 was selected for electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 07 refers to Electric accumulators, including separators therefor, whether or not rectangular (including square).

HS Code tree structure

8500000000 80

Chapter ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES

8507000000 80

Electric accumulators, including separators therefor, whether or not rectangular (including square)

8507100000 80

- Lead-acid, of a kind used for starting piston engines

8507102000 80

- - Working with liquid electrolyte

8507102010 80

- - - For use in civil aircraft

8507102090 80

- - - Other

8507108000 80

- - Other

8507108010 80

- - - For use in civil aircraft

8507108090 80

- - - Other

8507200000 80

- Other lead-acid accumulators

8507202000 80

- - Working with liquid electrolyte

8507202010 80

- - - For use in civil aircraft

8507202090 80

- - - Other

8507208000 80

- - Other

8507208010 80

- - - For use in civil aircraft

8507208090 80

- - - Other

8507300000 80

- Nickel-cadmium

8507302000 80

- - Hermetically sealed

8507302010 80

- - - For use in civil aircraft

8507302090 80

- - - Other

8507308000 80

- - Other

8507308010 80

- - - For use in civil aircraft

8507308090 80

- - - Other

8507500000 80

- Nickel-metal hydride

8507500010 80

- - For use in civil aircraft

8507500090 80

- - Other

8507600000 80

- Lithium-ion

8507600010 80

- - For use in civil aircraft

8507600015 80

- - Cylindrical lithium-ion-accumulators or modules with: - a nominal capacity of 8,8 Ah or more, but not more than 18 Ah, - a nominal voltage of 36 V or more, but not more than 48 V, - a power of 300 W or more, but not more than 648 W, for use in the manufacture of electric bicycles

8507600018 80

- - Lithium-ion polymer accumulator pack equipped with a battery management system and can-bus interface with: - 6 modules with 90 cells or more but not more than 192 cells, - a nominal voltage of 280 V or more but not more than 400 V, - a nominal capacity of 9,7 Ah or more but not more than 120 Ah, - a charging voltage of 110 V or more but not more than 495 V, and in a metal casing with: - a length of not more than 1 723 mm, - a width of not more than 1 162,23 mm, - a height of not more than 395 mm, for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703

8507600024 80

- - Rechargeable lithium-ion battery, based on lithium-iron-phosphate technology, with: -a fuse, -a cell-to-pack design, -a length of 985 mm or more but not more than 1 015 mm, -a width of 1 050 mm or more but not more than 1 070 mm -a height of 145 mm or more but not more than 160 mm, -a weight of 220 kg or more but not more than 250 kg, -a capacity of 200 Ah or more, -a specific energy density of 130 Wh/kg or more, for use in the manufacture of vehicles of subheading 8702 40

8507600026 80

- - Modules for the assembly of electric accumulators using lithium ferrophosphate technology (LFP) with: -a length of 670 mm or more, but not more than 882 mm, -a width of 390 mm or more, but not more than 655 mm, -a height of 110 mm or more, but not more than 155 mm, -a weight of 60 kg or more, but not more than 165 kg, and -a power of 11 300 Wh or more, but not more than 29 360 Wh

8507600028 80

- - Lithium-ion rechargeable battery cell with: - a length of 190mm or more but not more than 380mm, - a width of 90mm or more but not more than 150mm, - a height of 4mm or more but not more than 35mm, - a weight of 0,1kg or more but not more than 2,5kg, - a nominal voltage of 3,0 VDC or more but not more than 5,0 VDC, - a nominal capacity of not more than 150Ah, for use in the manufacture of rechargeable hybrid and electric vehicle batteries

8507600029 80

- - A lithium-ion-rechargeable battery pack in a specific housing suitable for operating in digital cameras, having: -­a length of 50 mm or more but not more than 120 mm, -­a width of 35 mm or more but not more than 80 mm, -­a height of 15 mm or more but not more than 45 mm, -a weight of 0,040 kg or more but not more than 0,085 kg, and -­a capacity of not more than 2200 mAh

8507600030 80

- - Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries

8507600031 80

- - Modules for the assembly of lithium-ion battery packs, using a technology other than lithium ferrophosphate (LFP) with: -a length of 298 mm or more, but not more than 500 mm, -a width of 33,5 mm or more, but not more than 209 mm, -a height of 75 mm or more, but not more than 228 mm, -a weight of 3,6 kg or more, but not more than 17 kg, -a power of 458 Wh or more, but not more than 3 510 Wh, and -a voltage of less than 45 V or more than 70 V

8507600033 80

- - Lithium-ion battery module or accumulator, with: - a length of 150mm or more, but not more than 1 310mm, - a width of 100mm or more, but not more than 1 000mm, - a height of 200mm or more, but not more than 1 500mm, - a weight of 50kg or more, but not more than 200kg, - cells of a nominal capacity of 58 Ah or more but not more than 500Ah, - a nominal output voltage of 230 V AC or 45 V or more but not more than 980 V DC

8507600036 80

- - Lithium-ion accumulator, with -multiple connected lithium-ion accumulator cells, -charging and monitoring electronics, -a power of 74 Wh or more, but not more than 75 Wh, -in a plastic housing with electrical connection contacts and LCD display, for use in the manufacture of cordless vacuum cleaners or rechargeable power sources therefor

8507600048 80

- - Integrated battery system in a metal or plastic case with or without holders, consisting of: - a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy between 0,3kWh and 0,9 kWh, - a Battery Management System, - a power relay, - a cooling system, - one to four connectors, - for use in the manufacture of Mild-hybrid (mHEV) motor vehicles

8507600058 80

- - Prismatic lithium-ion electric accumulator with: -a width of 120,0 mm or more but not more than 305,0 mm, -a thickness of 12,0 mm or more but not more than 67,0 mm, -a height of 72,0 mm or more but not more than 126,0 mm, -a nominal voltage of 3,6 V or more but not more than 3,75 V, and -a nominal capacity of 6,9 Ah or more not more than 265 Ah, for use in the manufacture of rechargeable electric vehicle batteries

8507600077 80

- - Lithium-ion rechargeable batteries, with: -a length of 700 mm or more, but not more than 2 820 mm, -a width of 935 mm or more, but not more than 1 660 mm, -a height of 85 mm or more, but not more than 700 mm, -a weight of 250 kg or more, but not more than 700 kg, -a power of not more than 175 kWh, -a nominal voltage of 320 V or more, but not more than 430 V for use in the manufacture of vehicles of subheadings 8701 to 8705

8507600083 80

- - Modules for the assembly of ion lithium electric accumulators with: -a length of 570 mm or more, but not more than 610 mm, -­a width of 210 mm or more, but not more than 240 mm, -a height of 100 mm or more, but not more than 125 mm, -­a weight of 28 kg or more, but not more than 35 kg, and -a capacity of not more than 2500 Ah and a nominal energy of less than 8,4 kW, for use in the manufacture of vehicles of subheadings 8703 60, 8703 70, 8703 80 and 8704 60

8507600090 80

- - Other

8507800000 80

- Other accumulators

8507800010 80

- - For use in civil aircraft

8507800090 80

- - Other

8507900000 80

- Parts

8507903100 10

- - Separators

8507903100 80

- - - Of plastic film of a thickness not exceeding 40 micrometres

8507903110 80

- - - - For use in civil aircraft

8507903120 80

- - - - Separator for the manufacture of lithium-ion batteries, in rolls, made of transparent, microporous, acrylic acid grafted polyethylene film, with: -a width of 98 mm or more but not more than 170 mm, -a thickness of 15 µm or more but not more than 36 µm

8507903130 80

- - - - Separator for the manufacture of lithium-ion batteries, in rolls, made of microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (TD) shrinkage, -a total thickness of 8 μm or more, but not more than 40 μm, -a width of 15 mm or more, but not more than 900 mm, -a length of more than 200 m, but not more than 8 000 m, -an average pore size between 0,02 μm and 0,1 μm, -whether or not coated with surfactant, -whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm, -whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm

8507903140 80

- - - - Separator for the manufacture of lithium-ion batteries made of a multi-porous multilayer separator foil with: -one microporous polyethylene layer between two microporous polypropylene layers and whether or not coated with aluminium oxide on both sides, -a width of 65 mm or more but not more than 170 mm, -a total thickness of 10 µm or more but not more than 30 µm, -a porosity of 25 % (vol.) or more but not more than 65 % (vol.)

8507903190 80

- - - - Other

8507903900 80

- - - Other

8507903910 80

- - - - For use in civil aircraft

8507903990 80

- - - - Other

8507908000 80

- - Other

8507908010 80

- - - For use in civil aircraft

8507908055 80

- - - Top cap or housing made of aluminium or ferrous alloy or stainless steel:  -whether or not including parts made of aluminum and aluminium alloy, -with or without sealing elements or other elements made of polymer material, -with or without a current interrupt device and an evacuation valve -with or without plastic sockets -with an outer diameter of 17 mm or more, but not more than 18 mm, or rectangular with: -length not greater than 450 mm, -width not greater than 200 mm, and -hight not greater than 150 mm, for use in the manufacture of lithium-ion batteries

8507908090 80

- - - Other