Import trade restrictions for 8537200000 80
Duties for more codes with a free account
You have looked at the duties of 10 codes today. Sign up free to see duties, measures and history for every code.
Preferential rules of origin for 8537200000
What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algeria
EU-Egypt Association Agreement · Egypt
EU-Jordan Association Agreement · Jordan
EU-Morocco Association Agreement · Morocco
EU-Tunisia Association Agreement · Tunisia
Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517 / or: Manufacture in which: the value of all the materials used does not exceed 40 % of the ex-works price of the product, and within the above limit, the value of all the materials of heading 8538 used does not exceed 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EPA CARIFORUM
EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands
Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading No 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading No 8517 / or: Manufacture: – in which the value of all the materials used does not exceed 40 % of the ex-works price of the product; – where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU-Canada CETA · Canada
A change from any other heading, except from heading 85.38; or A change from heading 85.38, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in heading 85.38 does not exceed 50 per cent of the transaction value or ex-works price of the product.
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru
Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517 / or: Manufacture from materials of any heading, except that of the product
EPA Eastern and Southern Africa
Diodes, transistors and similar semi-conductor devices, except wafers not yet cut into chips / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya
Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading No 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading No 8517 / or: Manufacture: in which the value of all the materials used does not exceed 40 % of the ex-works price of the product; where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam
Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits; connectors for optical fibres, optical fibre bundles or cables; boards, panels, consoles, desks, cabinets and other bases, for electric control or the distribution of electricity / or: (a) LDCs Manufacture from materials of any heading, except that of the product and of heading 8538 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product and of heading 8538 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Israel Association Agreement · Israel
Boards, panels (including numerical control panels), consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading No 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, other than switching apparatus of heading No 8517 / or: Manufacture: in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, and where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan
Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits; connectors for optical fibres, optical fibre bundles or cables; boards, panels, consoles, desks, cabinets and other bases, for electric control or the distribution of electricity / or: Manufacture from materials of any heading, except that of the product and of heading 8538 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
EU-Japan EPA · Japan
CTH except from heading 85.38; MaxNOM 50 % (EXW); or RVC 55 % (FOB).
EU-Korea FTA · South Korea
Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 45 % of the ex-works price of the product
EU-Lebanon Association Agreement · Lebanon
Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517 / or: Manufacture in which: the value of all the materials used does not exceed 40 % of the ex-works price of the product, within the above limit, the value of all the materials of heading 8538 used does not exceed 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexico
Boards, panels, consoles, disks, cabinets and other bases, equipped with two or more apparatus of heading No 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading No 8517 / or: Manufacture: in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palestine
Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading No 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading No 8517 / or: Manufacture: in which the value of all the materials used does not exceed 40% of the ex-works price of the product; where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
EU-Singapore FTA · Singapore
Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits; connectors for optical fibres, optical fibre bundles or cables; boards, panels, consoles, desks, cabinets and other bases, for electric control or the distribution of electricity / or: Manufacture from materials of any heading, except that of the product and of heading 8538. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Viet Nam FTA · Vietnam
electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits; connectors for optical fibres, optical fibre bundles or cables; boards, panels, consoles, desks, cabinets and other bases, for electric control or the distribution of electricity; / or: Manufacture from materials of any heading, except that of the product and of heading 8538; or manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets
Legal and explanatory notes for 8537200000
8537 CN Explanatory Notes: Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517
This heading includes assemblies on a support (for example, panel, box) of identical items of equipment to those of heading 8536 (for example, light switches).
Notes to chapter 85
Notes 1. This chapter does not cover: (a) electrically warmed blankets, bed pads, foot-muffs or the like; electrically warmed clothing, footwear or ear pads or other electrically warmed articles worn on or about the person; (b) articles of glass of heading 7011; (c) machines and apparatus of heading 8486; (d) vacuum apparatus of a kind used in medical, surgical, dental or veterinary science (heading 9018); or (e) electrically heated furniture of Chapter 94. 2. Headings 8501 to 8504 do not apply to goods described in heading 8511, 8512, 8540, 8541 or 8542. However, metal tank mercury arc rectifiers remain classified in heading 8504. 3. For the purposes of heading 8507, the expression ‘electric accumulators’ includes those presented with ancillary components which contribute to the accumulator’s function of storing and supplying energy or protect it from damage, such as electrical connectors, temperature control devices (e.g., thermistors) and circuit protection devices. They may also include a portion of the protective housing of the goods in which they are to be used. 4. Heading 8509 covers only the following electromechanical machines of the kind commonly used for domestic purposes: (a) floor polishers, food grinders and mixers, and fruit or vegetable juice extractors, of any weight; (b) other machines provided the weight of such machines does not exceed 20 kg. The heading does not, however, apply to fans or ventilating or recycling hoods incorporating a fan, whether or not fitted with filters (heading 8414), centrifugal clothes-dryers (heading 8421), dishwashing machines (heading 8422), household washing machines (heading 8450), roller or other ironing machines (heading 8420 or 8451), sewing machines (heading 8452), electric scissors (heading 8467) or to electrothermic appliances (heading 8516). 5. For the purposes of heading 8517, the term ‘smartphones’ means telephones for cellular networks, equipped with a mobile operating system designed to perform the functions of an automatic data processing machine such as downloading and running multiple applications simultaneously, including third-party applications, and whether or not integrating other features such as digital cameras and navigational aid systems. 6. For the purposes of heading 8523 : (a) ‘solid-state non-volatile storage devices’ (for example, ‘flash memory cards’ or ‘flash electronic storage cards’) are storage devices with a connecting socket, comprising in the same housing one or more flash memories (for example, ‘Flash E2PROM’) in the form of integrated circuits mounted on a printed circuit board. They may include a controller in the form of an integrated circuit and discrete passive components, such as capacitors and resistors; (b) the term ‘smart cards’ means cards which have embedded in them one or more electronic integrated circuits (a microprocessor, random access memory (RAM) or read-only memory (ROM)) in the form of chips. These cards may contain contacts, a magnetic stripe or an embedded antenna but do not contain any other active or passive circuit elements. 7. For the purposes of heading 8524, ‘flat panel display modules’ refer to devices or apparatus for the display of information, equipped at a minimum with a display screen, which are designed to be incorporated into articles of other headings prior to use. Display screens for flat panel display modules include, but are not limited to, those which are flat, curved, flexible, foldable or stretchable in form. Flat panel display modules may incorporate additional elements, including those necessary for receiving video signals and the allocation of those signals to pixels on the display. However, heading 8524 does not include display modules which are equipped with components for converting video signals (e.g., a scaler IC, decoder IC or application processer) or have otherwise assumed the character of goods of other headings. For the classification of flat panel display modules defined in this note, heading 8524 shall take precedence over any other heading in the nomenclature. 8. For the purposes of heading 8534, ‘printed circuits’ are circuits obtained by forming on an insulating base, by any printing process (for example, embossing, plating-up, etching) or by the ‘film circuit’ technique, conductor elements, contacts or other printed components (for example, inductances, resistors, capacitors) alone or interconnected according to a pre-established pattern, other than elements which can produce, rectify, modulate or amplify an electrical signal (for example, semiconductor elements). The expression ‘printed circuits’ does not cover circuits combined with elements other than those obtained during the printing process, nor does it cover individual, discrete resistors, capacitors or inductances. Printed circuits may, however, be fitted with non-printed connecting elements. Thin- or thick-film circuits comprising passive and active elements obtained during the same technological process are to be classified in heading 8542. 9. For the purpose of heading 8536, ‘connectors for optical fibres, optical-fibre bundles or cables’ means connectors that simply mechanically align optical fibres end to end in a digital line system. They perform no other function, such as the amplification, regeneration or modification of a signal. 10. Heading 8537 does not include cordless infrared devices for the remote control of television receivers or other electrical equipment (heading 8543). 11. For the purposes of heading 8539, the expression ‘light-emitting diode (LED) light sources’ covers: (a) ‘light-emitting diode (LED) modules’ which are electrical light sources based on light-emitting diodes (LED) arranged in electrical circuits and containing further elements like electrical, mechanical, thermal or optical elements. They also contain discrete active elements, discrete passive elements, or articles of heading 8536 or 8542 for the purposes of providing power supply or power control. Light-emitting diode (LED) modules do not have a cap designed to allow easy installation or replacement in a luminaire and ensure mechanical and electrical contact; (b) ‘light-emitting diode (LED) lamps’ which are electrical light sources containing one or more LED modules containing further elements like electrical, mechanical, thermal or optical elements. The distinction between light-emitting diode (LED) modules and light-emitting diode (LED) lamps is that lamps have a cap designed to allow easy installation or replacement in a luminaire and ensure mechanical and electrical contact. 12. For the purposes of headings 8541 and 8542 : (a) (i) ‘Semiconductor devices’ are semiconductor devices the operation of which depends on variations in resistivity on the application of an electric field or semiconductor-based transducers. Semiconductor devices may also include assembly of plural elements, whether or not equipped with active and passive device ancillary functions. ‘Semiconductor-based transducers’ are, for the purposes of this definition, semiconductor-based sensors, semiconductor-based actuators, semiconductor-based resonators and semiconductor-based oscillators, which are types of discrete semiconductor-based devices, which perform an intrinsic function, which are able to convert any kind of physical or chemical phenomena or an action into an electrical signal or an electrical signal into any type of physical phenomenon or an action. All the elements in semiconductor-based transducers are indivisibly combined, and may also include necessary materials indivisibly attached, that enable their construction or function. The following expressions mean: (1) ‘Semiconductor-based’ means built or manufactured on a semiconductor substrate or made of semiconductor materials, manufactured by semiconductor technology, in which the semiconductor substrate or material plays a critical and unreplaceable role of transducer function and performance, and the operation of which is based on semiconductor properties including physical, electrical, chemical and optical properties. (2) ‘Physical or chemical phenomena’ relate to phenomena, such as pressure, acoustic waves, acceleration, vibration, movement, orientation, strain, magnetic field strength, electric field strength, light, radioactivity, humidity, flow, chemicals concentration, etc. (3) ‘Semiconductor-based sensor’ is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of detecting physical or chemical quantities and converting these into electric signals caused by resulting variations in electric properties or displacement of a mechanical structure. (4) ‘Semiconductor-based actuator’ is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of converting electric signals into physical movement. (5) ‘Semiconductor-based resonator’ is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures in response to an external input. (6) ‘Semiconductor-based oscillator’ is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures. (ii) ‘Light-emitting diodes (LED)’ are semiconductor devices based on semiconductor materials which convert electrical energy into visible, infra-red or ultra-violet rays, whether or not electrically connected among each other and whether or not combined with protective diodes. Light-emitting diodes (LED) of heading 8541 do not incorporate elements for the purposes of providing power supply or power control; (b) ‘Electronic integrated circuits’ are: (1) monolithic integrated circuits in which the circuit elements (diodes, transistors, resistors, capacitors, inductances, etc.) are created in the mass (essentially) and on the surface of a semiconductor or compound semiconductor material (for example, doped silicon, gallium arsenide, silicon germanium, indium phosphide) and are inseparably associated; (2) hybrid integrated circuits in which passive elements (resistors, capacitors, inductances, etc.), obtained by thin- or thick-film technology, and active elements (diodes, transistors, monolithic integrated circuits, etc.), obtained by semiconductor technology, are combined to all intents and purposes indivisibly, by interconnections or interconnecting cables, on a single insulating substrate (glass, ceramic, etc.). These circuits may also include discrete components; (3) multichip integrated circuits consisting of two or more interconnected monolithic integrated circuits combined to all intents and purposes indivisibly, whether or not on one or more insulating substrates, with or without leadframes, but with no other active or passive circuit elements; (4) multi-component integrated circuits (MCOs) : a combination of one or more monolithic, hybrid, or multi-chip integrated circuits with at least one of the following components : silicon-based sensors, actuators, oscillators, resonators or combinations thereof, or components performing the functions of articles classifiable under heading 8532, 8533, 8541, or inductors classifiable under heading 8504, formed to all intents and purposes indivisibly into a single body like an integrated circuit, as a component of a kind used for assembly onto a printed circuit board (PCB) or other carrier, through the connecting of pins, leads, balls, lands, bumps, or pads. For the purpose of this definition : (1) ‘Components’ may be discrete, manufactured independently then assembled onto the rest of the MCO, or integrated into other components. (2) ‘Silicon based’ means built on a silicon substrate, or made of silicon materials, or manufactured onto integrated circuit die. (3) (a) ‘Silicon based sensors’ consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of detecting physical or chemical phenomena and transducing these into electric signals, caused by resulting variations in electric properties or displacement of a mechanical structure. ‘Physical or chemical phenomena’ relates to phenomena, such as pressure, acoustic waves, acceleration, vibration, movement, orientation, strain, magnetic field strength, electric field strength, light, radioactivity, humidity, flow, chemicals concentration, etc. (b) ‘Silicon based actuators’ consist of microelectronic and mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of converting electrical signals into physical movement. (c) ‘Silicon based resonators’ are components that consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures in response to an external input. (d) ‘Silicon based oscillators’ are active components that consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures. For the classification of the articles defined in this note, headings 8541 and 8542 shall take precedence over any other heading in the nomenclature, except in the case of heading 8523, which might cover them by reference to, in particular, their function. Subheading notes 1. Subheading 8525 81 covers only high-speed television cameras, digital cameras and video camera recorders having one or more of the following characteristics: - writing speed exceeding 0,5 mm per microsecond; - time resolution 50 nanoseconds or less; - frame rate exceeding 225 000 frames per second. 2. In respect of subheading 8525 82, radiation-hardened or radiation-tolerant television cameras, digital cameras and video camera recorders are designed or shielded to enable operation in a high-radiation environment. These cameras are designed to withstand a total radiation dose of at least 50 × 103 Gy(silicon) (5 × 106 RAD (silicon)), without operational degradation. 3. Subheading 8525 83 covers night vision television cameras, digital cameras and video camera recorders which use a photocathode to convert available light to electrons, which can be amplified and converted to yield a visible image. This subheading excludes thermal imaging cameras (generally subheading 8525 89). 4. Subheading 8527 12 covers only cassette-players with built-in amplifier, without built-in loudspeaker, capable of operating without an external source of electric power and the dimensions of which do not exceed 170 mm × 100 mm × 45 mm. 5. For the purposes of subheadings 8549 11 to 8549 19, ‘spent primary cells, spent primary batteries and spent electric accumulators’ are those which are neither usable as such because of breakage, cutting-up, wear or other reasons, nor capable of being recharged. Additional note 1. Subheadings 8519 20 10 and 8519 30 00 are to be taken not to apply to sound reproducing apparatus with laser reading system.
Notes to section XVI
MACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES Notes 1. This section does not cover: (a) transmission or conveyor belts or belting, of plastics of Chapter 39, or of vulcanised rubber (heading 4010), or other articles of a kind used in machinery or mechanical or electrical appliances or for other technical uses, of vulcanised rubber other than hard rubber (heading 4016); (b) articles of leather or of composition leather (heading 4205) or of furskin (heading 4303), of a kind used in machinery or mechanical appliances or for other technical uses; (c) bobbins, spools, cops, cones, cores, reels or similar supports, of any material (for example, Chapter 39, 40, 44 or 48 or Section XV); (d) perforated cards for jacquard or similar machines (for example, Chapter 39 or 48 or Section XV); (e) transmission or conveyor belts or belting, of textile material (heading 5910) or other articles of textile material for technical uses (heading 5911); (f) precious or semi-precious stones (natural, synthetic or reconstructed) of headings 7102 to 7104, or articles wholly of such stones of heading 7116, except unmounted worked sapphires and diamonds for styli (heading 8522); (g) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39); (h) drill pipe (heading 7304); (ij) endless belts of metal wire or strip (Section XV); (k) articles of Chapter 82 or 83; (l) articles of Section XVII; (m) articles of Chapter 90; (n) clocks, watches or other articles of Chapter 91; (o) interchangeable tools of heading 8207 or brushes of a kind used as parts of machines (heading 9603); similar interchangeable tools are to be classified according to the constituent material of their working part (for example, in Chapter 40, 42, 43, 45 or 59 or heading 6804 or 6909); (p) articles of Chapter 95; or (q) typewriter or similar ribbons, whether or not on spools or in cartridges (classified according to their constituent material, or in heading 9612 if inked or otherwise prepared for giving impressions), or monopods, bipods, tripods and similar articles, of heading 9620. 2. Subject to note 1 to this section, note 1 to Chapter 84 and note 1 to Chapter 85, parts of machines (not being parts of the articles of heading 8484, 8544, 8545, 8546 or 8547) are to be classified according to the following rules: (a) Parts which are goods included in any of the headings of Chapter 84 or 85 (other than headings 8409, 8431, 8448, 8466, 8473, 8487, 8503, 8522, 8529, 8538 and 8548) are in all cases to be classified in their respective headings. (b) Other parts, if suitable for use solely or principally with a particular kind of machine, or with a number of machines of the same heading (including a machine of heading 8479 or 8543) are to be classified with the machines of that kind or in heading 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 or 8538 as appropriate. However, parts which are equally suitable for use principally with the goods of headings 8517 and 8525 to 8528 are to be classified in heading 8517, and parts which are suitable for use solely or principally with the goods of heading 8524 are to be classified in heading 8529; (c) All other parts are to be classified in heading 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 or 8538 as appropriate or, failing that, in heading 8487 or 8548. 3. Unless the context otherwise requires, composite machines consisting of two or more machines fitted together to form a whole and other machines designed for the purpose of performing two or more complementary or alternative functions are to be classified as if consisting only of that component or as being that machine which performs the principal function. 4. Where a machine (including a combination of machines) consists of individual components (whether separate or interconnected by piping, by transmission devices, by electric cables or by other devices) intended to contribute together to a clearly defined function covered by one of the headings in Chapter 84 or 85, then the whole falls to be classified in the heading appropriate to that function. 5. For the purposes of these notes, the expression ‘machine’ means any machine, machinery, plant, equipment, apparatus or appliance cited in the headings of Chapter 84 or 85. 6. (A) Throughout the nomenclature, the expression ‘electrical and electronic waste and scrap’ means electrical and electronic assemblies, printed circuit boards, and electrical or electronic articles that: (a) have been rendered unusable for their original purposes by breakage, cutting-up or other processes or are economically unsuitable for repair, refurbishment or renovation to render them fit for their original purposes; and (b) are packaged or shipped in a manner not intended to protect individual articles from damage during transportation, loading and unloading operations. (B) Mixed consignments of ‘electrical and electronic waste and scrap’ and other waste and scrap are to be classified in heading 8549. (C) This section does not cover municipal waste, as defined in note 4 to Chapter 38. Additional notes 1. Tools necessary for the assembly or maintenance of machines are to be classified with those machines if imported with them. Interchangeable tools imported with machines are also to be classified therewith if they form part of the normal equipment of the machines and are normally sold with them. 2. Should the customs so require, the declarant shall produce, in support of his declaration, an illustrated document (for example, instructions, prospectus, a page from a catalogue, a photograph) giving the normal description of the machine, its uses and essential characteristics and, in respect of an unassembled or disassembled machine, an assembly plan and a list of the contents of the various packages. 3. The provisions of general rule 2(a) are also applicable, at the request of the declarant and subject to conditions stipulated by the competent authorities, to machines imported in split consignments.
Other explanatory notes for the chapter
Additional note 2 The explanatory note to additional note 3 to section XVI applies, mutatis mutandis.
Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex
Restrictions and flags for 8537200000
- Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 8537
Art. 3i, goods generating significant revenue for Russia
Read the act on EUR-Lex - Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 8537
Art. 3k, goods contributing to Russian industrial capacity
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 85372091
Covers only part of the goods under this code (act names 85372091).
May be dual-use; check the Annex I entry 3A225 (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 85372099
Covers only part of the goods under this code (act names 85372099).
May be dual-use; check the Annex I entry 3A225 (correlation table is non-binding)
Read the act on EUR-Lex
For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full. The dual-use table links codes to control list entries and is non-binding.
EU trade in 2025 for 8537200000
- Extra-EU imports
- €859.5M
- 43,768 t
- Extra-EU exports
- €2.5B
Top origin countries by import value
China €266.7M
Türkiye €231.1M
Norway €113.1M
Switzerland €94.1M
Morocco €32.4M
Figures for CN8 code 85372000. Source: Eurostat, Comext, CC BY 4.0, processed by hscode.info. Confidential trade is not allocated to codes.
UK import duty for 853720
- 2%
Third-country duties of all UK commodity codes under this HS subheading. Source: UK Department for Business and Trade, as of Nov 2, 2026. The UK tariff differs from the EU tariff.
Import VAT in the EU
- Austria 20 %
- Belgium 21 %
- Bulgaria 20 %
- Croatia 25 %
- Cyprus 19 % maybe 3 %
- Czechia 21 %
- Denmark 25 %
- Estonia 24 %
- Finland 25.5 %
- France 20 %
- Germany 19 %
- Greece 24 %
- Hungary 27 %
- Ireland 23 %
- Italy 22 %
- Latvia 21 %
- Lithuania 21 %
- Luxembourg 17 %
- Malta 18 %
- Netherlands 21 %
- Poland 23 %
- Portugal 23 %
- Romania 21 %
- Slovakia 23 %
- Slovenia 22 %
- Spain 21 %
- Sweden 25 %
Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.
Rules of origin
Preferential rules of origin for subheading 853720 depend on the trade agreement. The Commission publishes them in Access2Markets.
Rules of origin on Access2MarketsInformation
When importing or exporting "For a voltage exceeding 1 000 V", it is crucial to have the correct HS code or TARIC code. The HS code 8537200000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "For a voltage exceeding 1 000 V", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "For a voltage exceeding 1 000 V".
- Check if any additional licenses, permits, or certificates are required to import "For a voltage exceeding 1 000 V" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "For a voltage exceeding 1 000 V" is 8537200000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "For a voltage exceeding 1 000 V".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 85 was selected for electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 37 refers to Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517.
3. Subheading
The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 20 refers to For a voltage exceeding 1 000 V.
HS Code tree structure
8500000000 80
Chapter ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
8537000000 80
Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517
8537100000 80
- For a voltage not exceeding 1 000 V
8537101000 80
- - Numerical control panels with built-in automatic data-processing machine
8537101010 80
- - - For use in certain types of aircraft
8537101090 80
- - - Other
8537109100 10
- - Other
8537109100 80
- - - Programmable memory controllers
8537109110 80
- - - - For use in certain types of aircraft
8537109125 10
- - - - Other
8537109125 80
- - - - - A control unit being a printed circuit board with at least: -a microprocessor, -a programmable memory, -a single connector, -a PPE housing, -a supply of voltage of 220 V or more but not more than 240 V, -a length of 200 mm or more but not more than 210 mm, -a width of 70 mm or more but not more than 100 mm, and -a height of 20 mm or more but not more than 30 mm, for use in the manufacture of dishwashers
8537109135 80
- - - - - A control unit being a printed circuit board with at least: -a microprocessor, -a programmable memory, -two or more connectors, but not more than twelve, -with or without LCD display, -with or without WiFi module, and -with or without an integrated speaker, for use in the manufacture of built-in ovens
8537109143 80
- - - - - Electronic suspension control unit with: -a printed circuit board in plastic housing, -LIN and CAN buses, -a programmable memory, -a signal processor, -an operating direct current voltage of 9 V or more but not more than 16 V, -at least one connector, -whether or not with metal mounting bracket, for use in the manufacture of goods of Chapter 87
8537109145 80
- - - - - Main hybrid system controller, diagnosing and controlling the elements of the hybrid propulsion system, with: -a programmable memory, -a microprocessor, -at least one composite connector, -a voltage of 24 V, -with a length of 350 mm or more but not more than 400 mm, -with a width of 200 mm or more but not more than 250 mm, -with a height of 80 mm or more but not more than 120 mm, -in a metal housing
8537109148 80
- - - - - Control unit for the automatic transmission oil pump for efficient cooling and oil pressure regulation in the car's drivetrain: -liquid-cooled, -with an operating voltage of 9 V DC or more, but not more than 16 V, -with a height of 165 mm or more, but not more than 190 mm, -with a width of 40 mm or more, but not more than 60 mm, -with a length of 170 mm or more, but not more than 195 mm, -in a casing, -with one or more connectors, and for use in the manufacture of hybrid motor vehicles
8537109157 80
- - - - - Programmable memory control board with: -4 or more stepper motor drivers, -4 or more outputs with MOSFET transistors, -a main processor, -3 or more inputs for temperature sensors, -for a voltage of 10 V or more but not more than 30 V for use in the manufacture of 3D printers
8537109160 80
- - - - - Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least: - an AC power input of 208 V or more but not more than 400 V, - a logic power input of 24 V DC, - an automatic circuit breaker, - a main power switch, - internal or external electrical connectors and cables, - in a housing with dimension of 281 mm x 180 mm x 75 mm or more, but not more than 630 mm x 420 mm x 230 mm, of a kind used for manufacturing recycling or sorting machines
8537109170 80
- - - - - Programmable motor memory controller for a voltage not exceeding 1000 V comprising at least - a printed circuit with active and passive components, - an aluminium housing, and - multiple connectors
8537109173 80
- - - - - Multifunctional device (so-called “combine instrument”) with: - curved TFT-LCD display (radius 750 mm) with contact-sensitive surfaces, - microprocessors and memory chips, - acoustic module and loudspeaker, - connections for CAN, 3 x LIN bus, LVDS and Ethernet, - for operating various functions (e.g. chassis, lighting) and - for situation-related display of vehicle and navigation data (e.g. speed, odometer, charge level of the drive battery), for use in the manufacture of passenger cars powered solely by an electric motor covered by HS subheading 8703 80
8537109175 80
- - - - - Printed circuit board equipped with a microcontroller for operating and/or control purposes -with or without operating components, signal components and display, -for operating voltages of 5V DC or more but not more than 24V DC or 220V AC or more but not more than 400V AC, -with or without housing for use in the manufacture of household appliances of subheadings 7321 11, 8414 60, 8418 10, 8418 21, 8418 29, 8418 40, 8422 11, 8450 11, 8450 12, 8450 19, 8450 20, 8451 21, 8451 29, 8516 60
8537109199 80
- - - - - Other
8537109500 80
- - - Touch-Sensitive Data Input Devices (so-called touch screens) without display capabilities, for incorporation into apparatus having a display, which function by detecting the presence and location of a touch within the display area
8537109800 80
- - - Other
8537109810 80
- - - - For use in certain types of aircraft
8537109830 10
- - - - Other
8537109830 80
- - - - - Motor bridge ICs without programmable memory consisting of: - one or more integrated circuits, not interconnected, on separate lead frames, - also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars - mounted in a plastic housing
8537109833 80
- - - - - Lever for control module under the steering wheel: -with several single or multi-positional electrical switches (push-button, rotary or other), -equipped with printed circuit boards and/or electrical cables, -for a voltage of 9 V or more but not more than 16 V, of a kind used in the manufacture of motor vehicles of Chapter 87
8537109838 80
- - - - - Control panel with switches for mirror, windows and other functions in vehicles, with: -a total length of 144 mm or more but not more than 150 mm, -a distance between intended screwing interface center points of 31 mm or more but not more than 31,50 mm, and -electric components inside the panel with integrated LEDs, for use in the manufacture of automotive components
8537109843 80
- - - - - Switch for motor vehicle seat regulation with a memory function, with: -three single switches, -a five-pin connector, -for a voltage of 9 VDC or more but not more than 16 VDC, and -electric components inside the panel with integrated LED, for use in the manufacture of automotive components
8537109845 80
- - - - - Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least: - an AC power input of 208 V or more but not more than 400 V, - a logic power input of 24 V DC, - an automatic circuit breaker, - a main power switch, - internal or external electrical connectors and cables, - in a housing with dimension of 281 mm x 180 mm x 75 mm or more, but not more than 630 mm x 420 mm x 230 mm, of a kind used for manufacturing recycling or sorting machines
8537109848 80
- - - - - Memory switch control panel for seat and lock switch for vehicles with: -a width of 70,2 mm or more but not more than 70,5 mm, -parallel ribs with a distance between them of 2,6 mm or more but not more than 2,8 mm on the rear side, -a 5 pines connector, and -electric components inside the panel with integrated LED, for use in the manufacture of automotive components
8537109850 80
- - - - - Electronic control unit BCM (Body Control Module) or IBM (Integrated Body Control Module) or similar: - comprising at least a plastic box with printed circuit board, with operating direct voltage of 9 V or more, but not more than 16 V, - whether or not with metal holder, - able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder, of a kind used in the manufacture of goods of Chapter 87
8537109853 80
- - - - - A control unit being a printed circuit board with at least: -a microprocessor, -two or more connectors but not more than four, -modified resins, -a length of 180 mm or more but not more than 250 mm, -a width of 130 mm or more but not more than 200 mm, and -a height of 40 mm or more but not more than 60 mm, for use in the manufacture of washing machines
8537109855 80
- - - - - Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
8537109857 80
- - - - - A control unit being a printed circuit board with at least: -a microprocessor, -eight connectors or more but not more than eleven, -a supply voltage of 215 V or more but not more than 245 V, -a housing of PA6-MR30, -with or without a transformer, -with or without a high power relay, -with or without insulated-gate bipolar transistor, -a length of 280 mm or more but not more than 345 mm, -a width of 400 mm or more but not more than 470 mm, -a height of 28 mm or more but not more than 45 mm, for use in the manufacture of induction stoves
8537109863 80
- - - - - A control unit being a printed circuit board with at least: -a microprocessor, -two connectors, -a supply voltage of 215 V or more but not more than 245 V, -no housing, -a length of 100 mm or more but not more than 120 mm, -a width of 40 mm or more but not more than 50 mm, and -a height of 20 mm or more but not more than 30 mm, for use in the manufacture of refrigerators
8537109893 80
- - - - - Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems
8537109899 80
- - - - - Other
8537200000 80
- For a voltage exceeding 1 000 V
8537209100 80
- - For a voltage exceeding 1 000 V but not exceeding 72,5 kV
8537209110 80
- - - For use in certain types of aircraft
8537209190 80
- - - Other
8537209900 80
- - For a voltage exceeding 72,5 kV
8537209910 80
- - - For use in certain types of aircraft
8537209990 80
- - - Other