New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 8807000000 80 - Parts of goods of heading 8801, 8802 or 8806

Email me changes

Import trade restrictions for 8807000000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 67
KR
Korea, Republic of (South Korea) KR
01-01-2022
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-01-2022
0 %
Airworthiness tariff suspension 119
NZ
New Zealand NZ
01-05-2024
0 %
Tariff preference 142
5500
Mercosur 5500
01-05-2026
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
IQ
Iraq IQ
Means of transport more than 75 years old
23-05-2003
Restriction on entry into free circulation 465
SY
Syria SY
Means of transport more than 75 years old
29-05-2025
Restriction on entry into free circulation 465
SY
Syria SY
Other than those mentioned in Regulation (EC) no 1332/2013 (OJ L 335): no restrictions
29-05-2025
Restriction on entry into free circulation 465
IQ
Iraq IQ
Other than those mentioned in Regulation (EC) no 1210/2003 (OJ L 169): no restrictions
23-05-2003
Restriction on entry into free circulation 465
FO
Faroe Islands FO
01-01-1997
0 %
Tariff preference 142
XL
Melilla XL
01-01-1999
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Tariff preference 142
SM
San Marino SM
01-01-2006
0 %
Customs union duty 106
TR
Türkiye TR
01-01-2006
0 %
Customs union duty 106
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Tariff preference 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
UA
Ukraine UA
01-01-2016
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
EC
Ecuador EC
01-01-2017
0 %
Tariff preference 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
2020
GSP - General arrangements 2020
01-01-2026
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
SG
Singapore SG
01-01-2027
0 %
Tariff preference 142
XS
Serbia XS
01-02-2010
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
PE
Peru PE
01-03-2013
0 %
Tariff preference 142
MK
North Macedonia MK
01-04-2004
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
AL
Albania AL
01-04-2009
0 %
Tariff preference 142
XK
Kosovo XK
01-04-2016
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
ME
Montenegro ME
01-05-2010
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
XC
Ceuta XC
01-07-1991
0 %
Accession act0001/85
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
BA
Bosnia and Herzegovina BA
01-07-2008
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
VN
Viet Nam VN
01-08-2020
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
GE
Georgia GE
01-09-2014
0 %
Tariff preference 142
SY
Syria SY
01-11-1978
0 %
Tariff preference 142
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
ZA
South Africa ZA
10-10-2016
0 %
Tariff preference 142
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
CH
Switzerland CH
20-12-1972
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Tariff preference 142
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 5
RU
Russian Federation RU
20-07-2025
Document required
banned without it
Import/export restriction - Common Military List (CML) goods 738
BY
Belarus BY
20-07-2025
Document required
banned without it
Import control 731
RU
Russian Federation RU
06-09-2014
– 31-07-2027
Document required
banned without it
Import control on restricted goods and technologies 711
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 8807000000

  • Customs value €1,000.00
  • No third-country duty is recorded for this origin.
  • Import VAT 19 % €190.00
  • Total €1,190.00

May be lower under conditions:

  • Airworthiness tariff suspension: 0 %

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 8807000000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Measures 3
RU
Russian Federation RU
24-06-2023
Export prohibition 278
1008
All third countries 1008
Means of transport more than 75 years old
01-01-2007
Restriction on export 467
1008
All third countries 1008
Other than those mentioned in Regulation (EC) no 1210/2003 (OJ L 169): no restrictions
01-01-2007
Restriction on export 467
Controls and documents 12
ZW
Zimbabwe ZW
19-02-2026
Document required
banned without it
Export control 737
BY
Belarus BY
20-07-2025
Document required
banned without it
Export control 737
RU
Russian Federation RU
20-07-2025
Document required
banned without it
Import/export restriction - Common Military List (CML) goods 738
RU
Russian Federation RU
24-06-2023
Document required
banned without it
Export control 767
CD
Congo, Democratic Republic of CD
28-10-2026
Document required
banned without it
Export control 737
1008
All third countries 1008
02-01-2025
Document required
banned without it
Export control 780
1008
All third countries 1008
02-03-2009
Document required
banned without it
Export control on cultural goods 735
1008
All third countries 1008
15-12-2013
Document required
banned without it
Export authorization 473
1008
All third countries 1008
21-10-2024
Document required
banned without it
Export control 781
BY
Belarus BY
25-02-2025
Document required
banned without it
Export control 709
UA
Ukraine UA
25-02-2025
Document required
banned without it
Export control 709
UA
Ukraine UA
25-08-2022
Document required
banned without it
Export control 767

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 8807000000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chile

    EU-Algeria Association Agreement · Algeria

    EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland

    EU-Egypt Association Agreement · Egypt

    EU-Georgia DCFTA · Georgia

    EU-Iceland FTA · Iceland

    EU-Jordan Association Agreement · Jordan

    EU-Korea FTA · South Korea

    EU-Central America Association Agreement

    EU-Lebanon Association Agreement · Lebanon

    EU-Morocco Association Agreement · Morocco

    EU-Moldova DCFTA · Moldova

    Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

    EU-Tunisia Association Agreement · Tunisia

    EU-Ukraine DCFTA · Ukraine

    Aircraft, spacecraft, and parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EPA CARIFORUM

    EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

    EU-Mexico Global Agreement · Mexico

    Aircraft, spacecraft, and parts thereof; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Aircraft, spacecraft, and parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Rotochutes / or: Manufacture from materials of any heading including other materials of heading No 8804 / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    Aircraft, spacecraft, and parts thereof, except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Aircraft, spacecraft, and parts thereof; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product / or: Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product

  • EPA SADC · South Africa

    Aircraft, spacecraft, and parts thereof; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex–works price of the product

  • EU-Singapore FTA · Singapore

    Aircraft, spacecraft, and parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EU-Viet Nam FTA · Vietnam

    Aircraft, spacecraft, and parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 8807000000

Notes to chapter 88

Note 1. For the purposes of this chapter, the expression ‘unmanned aircraft’ means any aircraft, other than those of heading 8801, designed to be flown without a pilot on board. They may be designed to carry a payload or equipped with permanently integrated digital cameras or other equipment which would enable them to perform utilitarian functions during their flight. The expression ‘unmanned aircraft’, however, does not cover flying toys, designed solely for amusement purposes (heading 9503). Subheading notes 1. For the purposes of subheadings 8802 11 to 8802 40, the expression ‘unladen weight’ means the weight of the machine in normal flying order, excluding the weight of the crew and of fuel and equipment other than permanently fitted items of equipment. 2. For the purposes of subheadings 8806 21 to 8806 24 and 8806 91 to 8806 94, the expression ‘maximum take-off weight’ means the maximum weight of the machine in normal flying order, at take-off, including the weight of payload, equipment and fuel.

Other explanatory notes for the chapter

Subheading note 1 Permanently fitted items of equipment do not include, for example, emergency equipment (for example, lifeboats, parachutes and escape chutes) and interchangeable equipment for weapons systems. Where an incomplete or unfinished machine is classified as a complete article under general rule 2(a) for the interpretation of the Combined Nomenclature, the normal operating weight is to be used for determining the appropriate subheading.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

UK advance tariff rulings for 8807000000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 8807200010 Valid Jan 12, 2026 to Jan 11, 2029 · Ruling 600014278 on GOV.UK

    Hydraulic retraction actuator is used to retract and control the extension of the main landing gear. It is a double acting differential area actuator. It is to be installed between the main landing gear attachment point and the relevant attachment points within the A350XWB aircraft structure.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8807 - Parts of goods of heading 8801, 8802 or 8806 GIR 6 - Has been used to classify the goods to subheading level 8807.20 - Under-carriages and parts thereof 10 Digit Code 8807.20.00.10 - For use in civil aircraft Also classified in accordance with: Harmonised System Explanatory Notes (HSEN) heading 8807 - (i), (ii), and (II) (5)

  • UK 8807200010 Valid Oct 21, 2026 to Oct 20, 2029 · Ruling 600016216 on GOV.UK

    The product is a single titanium beam for use as part of the undercarriage of commercial civil aircraft. It is mainly cylindrical across the length with recesses at either end and in the middle on both sides. Approximate dimensions are 74” length x 12” width x 16” depth. It is a proprietary part manufactured to specific specifications and is not designed for any other use. Unable to obtain a photo of goods, the trader stated that the product has been packed ready for dispatch.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8807: Parts of goods of heading 8801, 8802 or 8806. GIR 6 - Has been used to classify the goods to subheading 880720: Under-carriages and parts thereof. 10 Digit Code: 8807200010: For use in civil aircraft. Also classified in accordance with: Harmonised System Explanatory Notes (HSEN) Heading 88.07 (II) (5)

  • UK 8807200010 Valid Oct 26, 2026 to Oct 25, 2029 · Ruling 600017301 on GOV.UK

    The product is a metal beam for use as part of the undercarriage of commercial civil aircraft. It is made from titanium and comprises a single metal beam that becomes part of the landing gear. It is mainly cylindrical across its length but with recesses at either end and in the middle on both sides. It is approximate 2.6m length x 0.9m width x 0.92m depth. It is a proprietary part manufactured to specific specifications and is not designed for any other use.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8807: Parts of goods of heading 8801, 8802 or 8806. GIR 6 - Has been used to classify the goods to subheading 880720: Under-carriages and parts thereof. 10 Digit Code: 8807200010: For use in civil aircraft. Also classified in accordance with: Harmonised System Explanatory Notes (HSEN) Heading 88.07 (II) (5)

+ 11 more
  • UK 8807300010 Valid Apr 25, 2025 to Apr 24, 2028 · Ruling 600012651 on GOV.UK

    Gear blow-down unit. This is an emergency backup system installed in civil aircraft to lower its landing gear in the event of the regular system failing to operate. The kit comprises a gas canister to store nitrogen at pressure, a blowdown valve, charging valve, pressure relief valve and pressure gauge. The blowdown valve is connected remotely by cable to the emergency landing lever in the cockpit. When activated the blowdown valve releases compressed gas which forces the landing gear down and into position. The goods are packed onto a crate for transport

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8807 - Parts of goods of heading 8801, 8802 or 8806 GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 8807.30 - Other parts of aeroplanes, helicopters or unmanned aircraft Code to 10 digits - 8807 3000 10 – For use in civil aircraft Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) to heading – 8807

  • UK 8807300010 Valid May 11, 2026 to May 10, 2029 · Ruling 600015463 on GOV.UK

    Sub-assembly SUB002-VA-03-0032 is a part of an active tuned vibration attenuator (ATVA) designed to be installed on civilian aircraft to manage unwanted vibration and noise. Manufactured from aluminium alloy, the part is precision engineered to a specific design to be assembled, along with additional parts, to form a completed ATVA assembly and is part of the aircraft’s original design specification. The completed assembly that the sub-assembly SUB002-VA-03-0032 forms part of is supplied to the aircraft industry for use in civilian aircraft. It detects and either cancels or significantly reduces structural vibrations caused by rotors, engines, or propellers.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8807 - Parts of goods of heading 8801, 8802 or 8806 GIR 6 - Has been used to classify the goods to subheading level 8807.30 - Other parts of aeroplanes, helicopters or unmanned aircraft 10 Digit Code – 8807.30.00.10 - For use in civil aircraft Also classified in accordance with: Note 2 to Section 15 Note 2 to Section 17 Harmonised System Explanatory Notes (HSEN) to heading 8807

  • UK 8807300099 Valid Dec 19, 2024 to Dec 18, 2027 · Ruling 600012036 on GOV.UK

    The plug is designed to block or seal an opening and is used as a protective barrier against contamination, damage or foreign object debris during maintenance, transport or storage of an aircraft ejection seat. The plug is made from a rigid Polyvinylchloride (PVC) and has a streamer (made of fabric) attached via metal keyring. The streamer is high visibility with the words “Remove before flight” present. During pre-flight checks the plug is removed by pulling on the streamer.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8807 - Parts of goods of heading 8801, 8802 or 8806. GIR 6 - has been used to classify the goods to subheading level 880730 - Other parts of aeroplanes, helicopters or unmanned aircraft. 10 digit code 8807300099 Other than elsewhere specified in this heading; Other than connecting components for use in the production of helicopter tail rotor shafts. Also classified in accordance with: Note 3 to Section XVII Harmonized System Explanatory Notes (HSEN) to heading 8807 (II)

  • UK 8807300099 Valid Jul 10, 2025 to Jul 9, 2028 · Ruling 600013371 on GOV.UK

    The product is a cartridge specially designed for use as part of an ejection seat for a military aircraft. Following ejection initiation by the pilot pulling the eject firing handle, the cartridge functions when a pin strikes the percussion cap of the cartridge. The pin strikes the cap with sufficient force to ignite the cap, which in turn ignites the mixture of gunpowder and nitrocellulose inside, generating high-pressure gas. The high-pressure gas bursts a thin copper disc designed to release the gas from the cartridge when the correct pressure has been reached. The high-pressure gas released from the cartridge causes initial movement of the ejection seat out of the cockpit and triggers other on-seat devices during the ejection sequence. The cartridge is composed of various components, which are either fabricated in-house or sourced from external suppliers and then assembled. It consists of multiple parts and materials, including metal caps, a brass casing, gunpowder, and nitrocellulose.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8807 - Parts of goods of heading 8801, 8802 or 8806. GIR 6 - Has been used to classify this product by the terms of heading 8807 30 - Other parts of aeroplanes, helicopters or unmanned aircraft. Digit Code: 88073000 99 - Other than elsewhere specified in this heading; Other than connecting components for use in the production of helicopter tail rotor shafts. Also Classified in Accordance with: Note 3 to Section XVII General Note III to Section XVII Harmonized System Explanatory Notes (HSENs) to Heading 8807

  • UK 8807300099 Valid Jul 11, 2025 to Jul 10, 2028 · Ruling 600013399 on GOV.UK

    Flexible hoses for transmission of high-pressure gas from a military aircraft ejection seat to the aircraft canopy, to trigger canopy fracture during an ejection. The hose comprises a Teflon resin inner tube with an outer stainless-steel braid, to which stainless steel end-fittings and a protective polyolefin heat-shrink tube are added. The end-fittings and hose-length is specially designed for the application. When the ejection sequence begins, an explosive cartridge releases high-pressure gas, which is used to trigger devices during the ejection process. High-pressure gas is passed through the flexible hose from the seat to the canopy. The high-pressure gas triggers the ignition of detonation cord to shatter the aircraft canopy above the pilot’s head, clearing the path for ejection. The hoses are flexible to enable the aircraft canopy to be opened and closed without damaging or disconnecting the hoses.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8807 - Parts of goods of heading 8801, 8802 or 8806. GIR 6 - Has been used to classify this product by the terms of heading 8807 30 - Other parts of aeroplanes, helicopters or unmanned aircraft. Digit Code: 88073000 99 - Other than elsewhere specified in this heading; Other than connecting components for use in the production of helicopter tail rotor shafts. Also Classified in Accordance with: Note 3 to Section XVII General Note III to Section XVII Harmonized System Explanatory Notes (HSENs) to Heading 8807

  • UK 8807300099 Valid Jul 15, 2025 to Jul 14, 2028 · Ruling 600013448 on GOV.UK

    The sequencer assembly is an electronic device that forms part of a military aircraft ejection seat. The sequencer is specially designed solely for this purpose. The sequencer uses environmental information from various sensors on the ejection seat (such as air speed and air pressure) to manage the timing and order of events in the ejection sequence. The sequencer is powered by a separate thermal battery (not part of the assembly) which is activated as part of the ejection initiation. The sequencer electronics are housed within a sealed aluminium box with external cable connectors. At the right time, as determined by the sequencer, electrical signals from the sequencer pass through cables (not part of the assembly) to electrically initiated charges (squibs). The squibs are used to initiate explosive cartridges, which are used to generate the high-pressure gas needed to operate various devices on the seat.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8807 - Parts of goods of heading 8801, 8802 or 8806. GIR 6 - Has been used to classify this product by the terms of heading 8807 30 - Other parts of aeroplanes, helicopters or unmanned aircraft. Digit Code: 88073000 99 - Other than elsewhere specified in this heading; Other than connecting components for use in the production of helicopter tail rotor shafts. Also Classified in Accordance with: Note 3 to Section XVII General Note III to Section XVII Harmonized System Explanatory Notes (HSENs) to Heading 8807

  • UK 8807300099 Valid Sep 4, 2025 to Sep 3, 2028 · Ruling 600013673 on GOV.UK

    A Ram Housing assembly which made of aluminium Alloy specifically used in a certain type of aircraft. It is a housing that will form part of the Oil Door Cooler Actuator system. It is used in the fan section of the aircraft which sits separately to the engine. The Ram Housing assembly is a actuator holding assembly which fastens the actuator to the C130 Aircraft (is an American four-engine turboprop military transport aircraft.) Packaging it is individually packed into cardboard.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8807 - Parts of goods of heading 8801, 8802 or 8806. GIR 5b - Has been used to identify the type of packaging - Individually packed into cardboard. GIR 6 - Has been used to classify this product by the terms of heading 8807 30 - Other parts of aeroplanes, helicopters or unmanned aircraft. Digit Code: 88073000 99 - Other than elsewhere specified in this heading; Other than connecting components for use in the production of helicopter tail rotor shafts. Also Classified in Accordance with: Note 3 to Section XVII General Note III to Section XVII Harmonized System Explanatory Notes (HSENs) …

  • UK 8807300099 Valid Nov 21, 2025 to Nov 20, 2028 · Ruling 600014157 on GOV.UK

    A DC motor assembly which is made of aluminium alloy it is specifically used in a certain type of aircraft. It is a motor that will form part of the oil door cooler actuator system. It is used in the fan section of the Aircraft which sits separately to the engine. The DC motor assembly when fitted to the oil door cooler actuator will and extend and retract the output shaft up and down the screw shaft opening and shutting the cooler door of the C130 Aircraft. The C130 Aircraft is an American four-engine turboprop military transport Aircraft. Packaging is individually packed into cardboard.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8807 - Parts of goods of heading 8801, 8802 or 8806. GIR 5b - Has been used to identify the type of packaging - Individually packed into cardboard. GIR 6 - Has been used to classify this product by the terms of heading 8807 30 - Other parts of aeroplanes, helicopters or unmanned aircraft. Digit Code: 88073000 99 - Other than elsewhere specified in this heading; Other than connecting components for use in the production of helicopter tail rotor shafts. Also Classified in Accordance with: Note 3 to Section XVII General Note III to Section XVII Harmonized System Explanatory Notes (HSENs) …

  • UK 8807300099 Valid Nov 21, 2025 to Nov 20, 2028 · Ruling 600014158 on GOV.UK

    An Armature assembly which is made of aluminium alloy is specifically used in a certain type of aircraft. The armature will form part of the oil door cooler actuator system. It is used in the fan section of the aircraft which sits separately to the engine. The armature assembly when fitted inside the DC motor which fits to the oil door cooler actuator, this will rotate counter-wise and anti clockwise depending on if you're extending or retracting the actuator when power is supplied. The C130 Aircraft is an American four engine turboprop military transport Aircraft. Packaging is individually packed into cardboard.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8807 - Parts of goods of heading 8801, 8802 or 8806. GIR 5b - Has been used to identify the type of packaging - Individually packed into cardboard. GIR 6 - Has been used to classify this product by the terms of heading 8807 30 - Other parts of aeroplanes, helicopters or unmanned aircraft. Digit Code: 88073000 99 - Other than elsewhere specified in this heading; Other than connecting components for use in the production of helicopter tail rotor shafts. Also Classified in Accordance with: Note 3 to Section XVII General Note III to Section XVII Harmonized System Explanatory Notes (HSENs) …

  • UK 8807300099 Valid Nov 21, 2025 to Nov 20, 2028 · Ruling 600014159 on GOV.UK

    A output tube assembly which is made of aluminium alloy is specifically used in a certain type of aircraft. The Output tube will form part of the oil door cooler actuator system. It is used in the fan section of the aircraft which sits separately to the engine. The output tube assembly when fitted to the drive screw assembly which attaches to the oil door cooler actuator, this will allow extension or retraction through the Ram housing. The C130 Aircraft is an American four engine turboprop military transport Aircraft. Packaging is individually packed into cardboard.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8807 - Parts of goods of heading 8801, 8802 or 8806. GIR 5b - Has been used to identify the type of packaging - Individually packed into cardboard. GIR 6 - Has been used to classify this product by the terms of heading 8807 30 - Other parts of aeroplanes, helicopters or unmanned aircraft. Digit Code: 88073000 99 - Other than elsewhere specified in this heading; Other than connecting components for use in the production of helicopter tail rotor shafts. Also Classified in Accordance with: Note 3 to Section XVII General Note III to Section XVII Harmonized System Explanatory Notes (HSENs) …

  • UK 8807300099 Valid Mar 4, 2026 to Mar 3, 2029 · Ruling 600014536 on GOV.UK

    An ‘O’ ring seal specially designed to create a seal to prevent leakage from pipe unions, manifolds or cartridge breaches of an ejection seat Ballistic System Transmission System (BSTS). The BSTS pipework and manifolds transfer high-pressure gas, generated by explosive cartridges installed in the seat, to devices on the seat which are powered by and/or triggered by the supply of high-pressure gas. The dimensions of the ‘O’ ring are specific to the application, as is the selection of material to ensure the ‘O’ ring is not damaged by the high pressures and temperatures of the BSTS system during an ejection, nor degraded over time by extreme environmental conditions during normal aircraft operation. The ‘O’ ring is manufactured out of acrylonitrile butadiene rubber (a synthetic rubber) to the UK MOD specification DTD 5607 GRADE 70.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 8807 - Parts of goods of heading 8801, 8802 or 8806 GIR 6 has been used to classify the goods to subheading level - 880730 - Other parts of aeroplanes, helicopters or unmanned aircraft 10-digit code 8807300099 - Other than elsewhere specified in this heading; Other than connecting components for use in the production of helicopter tail rotor shafts. Also Classified in Accordance with: General Note III to Section XVII Harmonized System Explanatory Notes (HSENs) to Heading 8807

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 880700 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Parts of goods of heading 8801, 8802 or 8806", it is crucial to have the correct HS code or TARIC code. The HS code 8807000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Parts of goods of heading 8801, 8802 or 8806", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Parts of goods of heading 8801, 8802 or 8806".
  2. Check if any additional licenses, permits, or certificates are required to import "Parts of goods of heading 8801, 8802 or 8806" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Parts of goods of heading 8801, 8802 or 8806" is 8807000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Parts of goods of heading 8801, 8802 or 8806".

HS Code structure

88
Chapter
07
Heading
00
Subheading
00
CN Subheading
00
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 88 was selected for aircraft, spacecraft, and parts thereof

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 07 refers to Parts of goods of heading 8801, 8802 or 8806.

HS Code tree structure

8800000000 80

Chapter AIRCRAFT, SPACECRAFT, AND PARTS THEREOF

8807000000 80

Parts of goods of heading 8801, 8802 or 8806

8807100000 80

- Propellers and rotors and parts thereof

8807100010 80

- - For use in civil aircraft

8807100020 80

- - Intended to be fitted in aircraft imported duty free or built within the Community

8807100090 80

- - Other

8807200000 80

- Under-carriages and parts thereof

8807200010 80

- - For use in civil aircraft

8807200020 80

- - Intended to be fitted in aircraft imported duty free or built within the Community

8807200090 80

- - Other

8807300000 80

- Other parts of aeroplanes, helicopters or unmanned aircraft

8807300010 80

- - For use in civil aircraft

8807300020 80

- - Intended to be fitted in aircraft imported duty free or built within the Community

8807300040 10

- - Other

8807300040 80

- - - Connecting components for use in the production of helicopter tail rotor shafts

8807300099 80

- - - Other

8807900000 80

- Other

8807901000 80

- - Of kites

8807902100 10

- - Of spacecraft (including satellites)

8807902100 80

- - - Of telecommunication satellites

8807902900 80

- - - Other

8807903000 80

- - Of suborbital and spacecraft launch vehicles

8807909000 80

- - Other

8807909010 80

- - - For use in civil aircraft

8807909020 80

- - - Intended to be fitted in aircraft imported duty free or built within the Community

8807909090 80

- - - Other