New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 9031000000 80 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors

Email me changes

Import trade restrictions for 9031000000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 54
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Airworthiness tariff suspension 119
IQ
Iraq IQ
Optical, photographic or cinematographic apparatus, between 50 and 100 years old, other than those covered by the additional codes 4008, 4010, 4011, 4013, 4023, 4040 - 4048
23-05-2003
Restriction on entry into free circulation 465
SY
Syria SY
Optical, photographic or cinematographic apparatus, between 50 and 100 years old, other than those covered by the additional codes 4008, 4010, 4011, 4013, 4023, 4040 - 4048
29-05-2025
Restriction on entry into free circulation 465
SY
Syria SY
Other than those mentioned in Regulation (EC) no 1332/2013 (OJ L 335): no restrictions
29-05-2025
Restriction on entry into free circulation 465
IQ
Iraq IQ
Other than those mentioned in Regulation (EC) no 1210/2003 (OJ L 169): no restrictions
23-05-2003
Restriction on entry into free circulation 465
FO
Faroe Islands FO
01-01-1997
0 %
Tariff preference 142
XL
Melilla XL
01-01-1999
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Tariff preference 142
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
TR
Türkiye TR
01-01-2006
0 %
Customs union duty 106
SM
San Marino SM
01-01-2006
0 %
Customs union duty 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Tariff preference 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
EC
Ecuador EC
01-01-2017
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
XC
Ceuta XC
01-07-1991
0 %
Accession act0001/85
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
VN
Viet Nam VN
01-08-2020
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
GE
Georgia GE
01-09-2014
0 %
Tariff preference 142
SY
Syria SY
01-11-1978
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
ZA
South Africa ZA
10-10-2016
0 %
Tariff preference 142
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
CH
Switzerland CH
20-12-1972
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 4
RU
Russian Federation RU
24-04-2026
– 23-04-2031
Document required
banned without it
Import control 762
BY
Belarus BY
25-02-2025
Document required
banned without it
Import control 760
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 9031000000

  • Customs value €1,000.00
  • No third-country duty is recorded for this origin.
  • Import VAT 19 % €190.00
  • Total €1,190.00

May be lower under conditions:

  • Airworthiness tariff suspension: 0 %

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 9031000000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Measures 2
1008
All third countries 1008
Optical, photographic or cinematographic apparatus, between 50 and 100 years old, other than those covered by the additional codes 4008, 4010, 4011, 4013, 4023, 4040 - 4048
01-01-2007
Restriction on export 467
1008
All third countries 1008
Other than those mentioned in Regulation (EC) no 1210/2003 (OJ L 169): no restrictions
01-01-2007
Restriction on export 467
Controls and documents 7
RU
Russian Federation RU
25-02-2025
Document required
banned without it
Export control 709
BY
Belarus BY
25-02-2025
Document required
banned without it
Export control 766
BY
Belarus BY
25-02-2025
Document required
banned without it
Export control 767
UA
Ukraine UA
25-02-2025
Document required
banned without it
Export control 709
UA
Ukraine UA
25-08-2022
Document required
banned without it
Export control 767
1008
All third countries 1008
15-12-2013
Document required
banned without it
Export authorization 473
IR
Iran, Islamic Republic of IR
31-01-2026
Document required
banned without it
Export control 767

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 9031000000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • EU-Chile Association Agreement · Chile

    EU-Algeria Association Agreement · Algeria

    EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland

    EU-Egypt Association Agreement · Egypt

    EU-Georgia DCFTA · Georgia

    EU-Iceland FTA · Iceland

    EU-Jordan Association Agreement · Jordan

    EU-Central America Association Agreement

    EU-Lebanon Association Agreement · Lebanon

    EU-Morocco Association Agreement · Morocco

    EU-Moldova DCFTA · Moldova

    EU-Mexico Global Agreement · Mexico

    Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

    EU-Tunisia Association Agreement · Tunisia

    EU-Ukraine DCFTA · Ukraine

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EPA CARIFORUM

    EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

    EU-Israel Association Agreement · Israel

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this Chapter ; profile projectors / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan

    Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors / or: Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Automatic regulating or controlling instruments and apparatus / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EU-Japan EPA · Japan

    CTH except from heading 96.20; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Korea FTA · South Korea

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this Chapter ; profile projectors / or: Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product

  • EPA SADC · South Africa

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this Chapter ; profile projectors / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex–works price of the product

  • EU-Singapore FTA · Singapore

    Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product

  • EU-Viet Nam FTA · Vietnam

    Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: / or: Manufacture from materials of any heading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70% of the ex-works price of the product.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 9031000000

9031 20 00 CN Explanatory Notes: Test benches

Test benches for checking fuel-injection pumps of diesel engines have, as essential components which are all fixed to the same stand, an electric motor and a device comprising injectors and graduated glass tubes for checking the output of the injection pump elements; they may additionally be fitted with an auxiliary appliance (a stroboscope) for checking the exact timing of fuel injections.

9031 80 20 CN Explanatory Notes: For measuring or checking geometrical quantities

Examples of geometrical quantities are: length, distance, diameter, radius, curvature, angle, tilt, volume, and surface roughness. This subheading also includes spirit levels. This subheading does not include interferometers for checking plane surfaces, used in laboratories (subheading 9027 50 00).

Notes to chapter 90

Notes 1. This chapter does not cover: (a) articles of a kind used in machines, appliances or for other technical uses, of vulcanised rubber other than hard rubber (heading 4016), of leather or of composition leather (heading 4205) or of textile material (heading 5911); (b) supporting belts or other support articles of textile material, whose intended effect on the organ to be supported or held derives solely from their elasticity (for example, maternity belts, thoracic support bandages, abdominal support bandages, supports for joints or muscles) (Section XI); (c) refractory goods of heading 6903; ceramic wares for laboratory, chemical or other technical uses, of heading 6909; (d) glass mirrors, not optically worked, of heading 7009, or mirrors of base metal or of precious metal, not being optical elements (heading 8306 or Chapter 71); (e) goods of heading 7007, 7008, 7011, 7014, 7015 or 7017; (f) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV) or similar goods of plastics (Chapter 39); however, articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences are to be classified in heading 9021; (g) pumps incorporating measuring devices, of heading 8413; weight-operated counting and checking machinery, or separately presented weights for balances (heading 8423); lifting or handling machinery (headings 8425 to 8428); paper or paperboard cutting machines of all kinds (heading 8441); fittings for adjusting work or tools on machine tools or water-jet cutting machines, of heading 8466, including fittings with optical devices for reading the scale (for example, optical dividing heads) but not those which are in themselves essentially optical instruments (for example, alignment telescopes); calculating machines (heading 8470); valves and other appliances of heading 8481; machines and apparatus (including apparatus for the projection or drawing of circuit patterns on sensitised semiconductor materials) of heading 8486; (h) searchlights or spotlights of a kind used for cycles or motor vehicles (heading 8512); portable electric lamps of heading 8513; cinematographic sound recording, reproducing or re-recording apparatus (heading 8519); sound-heads (heading 8522); television cameras, digital cameras and video camera recorders (heading 8525); radar apparatus, radio navigational aid apparatus or radio remote control apparatus (heading 8526); connectors for optical fibres, optical fibre bundles or cables (heading 8536); numerical control apparatus of heading 8537; sealed beam lamp units of heading 8539; optical fibre cables of heading 8544; (ij) searchlights or spotlights of heading 9405; (k) articles of Chapter 95; (l) monopods, bipods, tripods and similar articles, of heading 9620; (m) capacity measures, which are to be classified according to their constituent material; or (n) spools, reels or similar supports (which are to be classified according to their constituent material, for example, in heading 3923 or Section XV). 2. Subject to note 1 above, parts and accessories for machines, apparatus, instruments or articles of this chapter are to be classified according to the following rules: (a) Parts and accessories which are goods included in any of the headings of this chapter or of Chapter 84, 85 or 91 (other than heading 8487, 8548 or 9033) are in all cases to be classified in their respective headings. (b) Other parts and accessories, if suitable for use solely or principally with a particular kind of machine, instrument or apparatus, or with a number of machines, instruments or apparatus of the same heading (including a machine, instrument or apparatus of heading 9010, 9013 or 9031) are to be classified with the machines, instruments or apparatus of that kind. (c) All other parts and accessories are to be classified in heading 9033. 3. The provisions of notes 3 and 4 to Section XVI apply also to this chapter. 4. Heading 9005 does not apply to telescopic sights for fitting to arms, periscopic telescopes for fitting to submarines or tanks, or to telescopes for machines, appliances, instruments or apparatus of this chapter or Section XVI; such telescopic sights and telescopes are to be classified in heading 9013. 5. Measuring or checking optical instruments, appliances or machines which, but for this note, could be classified both in heading 9013 and in heading 9031 are to be classified in heading 9031. 6. For the purposes of heading 9021, the expression ‘orthopaedic appliances’ means appliances for: — preventing or correcting bodily deformities; or — supporting or holding parts of the body following an illness, operation or injury. Orthopaedic appliances include footwear and special insoles designed to correct orthopaedic conditions, provided that they are either (1) made to measure or (2) mass-produced, presented singly and not in pairs and designed to fit either foot equally. 7. Heading 9032 applies only to: (a) instruments and apparatus for automatically controlling the flow, level, pressure or other variables of liquids or gases, or for automatically controlling temperature, whether or not their operation depends on an electrical phenomenon which varies according to the factor to be automatically controlled, which are designed to bring this factor to, and maintain it at, a desired value, stabilised against disturbances, by constantly or periodically measuring its actual value; and (b) automatic regulators of electrical quantities, and instruments or apparatus for automatically controlling non-electrical quantities the operation of which depends on an electrical phenomenon varying according to the factor to be controlled, which are designed to bring this factor to, and maintain it at, a desired value, stabilised against disturbances, by constantly or periodically measuring its actual value. Additional notes 1. For the purposes of subheadings 9015 30 10, 9025 80 40, 9026 10 21, 9026 10 29, 9026 20 20, 9026 80 20, 9027 10 10 and 9032 10 20, the expression ‘electronic’ means instruments and apparatus which incorporate one or more articles of heading 8540, 8541 or 8542 but for the purposes of the foregoing, no account shall be taken of articles of heading 8540, 8541 or 8542 which have solely the function of rectifying current or which are included in the power pack of instruments or apparatus. 2. For the purposes of subheading 9021 10 10, the expression "orthopaedic appliances" means appliances which are specially designed for a particular orthopaedic purpose, in distinction to products that might be used for various purposes (for example, products for overstrained joints, ligaments or tendons caused by sporting activities, type writing, and products which simply alleviate pain in the defective or disabled part of the body, for example, caused by inflammation). The "orthopaedic appliances" must completely prevent a specific movement of the defective or disabled part of the body (for example, joints, ligaments, tendons) in order to exclude further injuries or bodily deformities or an aggravation of such injuries or deformities, as distinct from other products that cannot prevent specific movements, yet prevent reflex movements (movements carried out subconsciously) through the relative inflexibility of those products due to, for example, flexible splints, pressure pads, non-elastic textile material, restrictions through "Velcro-type" straps.

Notes to section XVIII

OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; CLOCKS AND WATCHES; MUSICAL INSTRUMENTS; PARTS AND ACCESSORIES THEREOF

Other explanatory notes for the chapter

Additional note 2 See also Note 6 to Chapter 90 and the judgment in Joined Cases C-260/00 to C-263/00, Lohmann GmbH & Co. KG and Medi Bayreuth Weihermüller & Voigtmann GmbH & Co. KG v Oberfinanzdirektion Koblenz, paragraphs 36, 37, 39, 40, 43 and 45, (ECLI:EU:C:2002:637). Examples of products falling under subheading 9021 10 10: Examples of products falling under Section XI:

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

UK advance tariff rulings for 9031000000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 9031499000 Valid Jul 29, 2025 to Jul 28, 2028 · Ruling 600013425 on GOV.UK

    A C-Cell instrument, which is used to measure various parameters to determine the quality of baked goods and the analysis makes sure the product conforms to baking standards. The instrument takes a number of images of the baked good under inspection and analysis software then produces values for a number of parameters such as colour, dimensions and shape, internal cell size, inclusions, e.g. the distribution of currents in a hot cross bun. These values can then be compared against known values to ensure consistency of production and quality. It is made from a steel casing with a plastic front panel and contains a number of LED lights, an HD camera and all necessary wiring and cabling. Dimensions of the instrument are: height 770mm x width 480mm x depth 370mm. The instrument is packaged inside a wooden crate for shipping.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 5b - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading 903149 - Other optical instruments and appliances: Other than for inspecting semiconductor wafers or devices (including integrated circuits) or for inspecting photomasks or reticles used in manufacturing semiconductor devices (including integrated circuits). 8-digit code 90314990 - Other than profile …

  • UK 9031499000 Valid Oct 9, 2026 to Oct 8, 2029 · Ruling 600016102 on GOV.UK

    A portable, handheld optical measuring device designed to measure and check railway wheelsets. The device uses non-contact laser light-section technology to capture wheel profile, diameter, back-to-back distance and other wheelset geometrical measurements. The handheld sensor transmits the measurement data to a tablet running dedicated software for processing, evaluation and display.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 6 - Has been used to classify the goods to subheading 903149 - Other optical instruments and appliances: Other than for inspecting semiconductor wafers or devices (including integrated circuits) or for inspecting photomasks or reticles used in manufacturing semiconductor devices (including integrated circuits). 8-digit code 90314990 - Other than profile projectors. Also classified in accordance with: Chapter …

  • UK 9031499000 Valid Oct 16, 2026 to Oct 15, 2029 · Ruling 600016367 on GOV.UK

    A machine vision inspection systems for contact lens manufacturing. It uses cameras, optical systems to capture images of the dry lenses in the process of soft contact manufacturing, and use machine vision algorithm to process the image to produce the results of pass or fail. This is an intelligent quality control system. The system is packaged with boxes and crates and will shipped to a machine builder to integrate into the whole production line or machine.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 3 C – Has been used as it is considered there is no essential character, and therefore has been classified to last in numerical order within the Tariff. GIR 5 B - Has been used to identify the type of packaging - Packaged with boxes and crates. GIR 6 - Has been used to classify the goods to subheading level 9031 49 - For Other optical instruments and appliances; For Other For inspecting semiconductor wafers or …

+ 20 more
  • UK 9031802000 Valid Nov 18, 2024 to Nov 17, 2027 · Ruling 600011839 on GOV.UK

    The rotary encoder measures the angular position of a rotating shaft. The Encoder is a critical part of a satellite telecommunications “system” which is used for communications over commercial frequency satellites. The “system” provides voice and data connectivity to radio frequency (RF) networks. The Encoders provide precise feedback about the antenna's orientation in relation to the satellite and this is vital for maintaining optimal antenna positioning, ensuring effective and reliable communication with the satellite. The Encoders are mounted on the antenna itself and they comprise a fixed part and a shaft which rotates with a rotation axis of the antenna as the antenna moves, the encoder generates electrical signals corresponding to its position. Encoders maintain effective operation of the motion control ‘sub’ system for satellite antennas. The encoder is typically coupled with a motor that adjusts the antenna’s orientation. As the motor turns the antenna, the encoders digital interface sends the axis data to the Motion Axis Controller. For shipment, the units are packaged individually in purpose designed cardboard carton.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9031 measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 9031 80 other instruments, appliances and machines 8 Digit Code 9031 80 20 - for measuring or checking geometrical quantities Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to heading 9031

  • UK 9031802000 Valid Aug 15, 2025 to Aug 14, 2028 · Ruling 600013515 on GOV.UK

    This product is designed to deliver high-performance, fully integrated dimensional measurement and surface roughness inspection both on the shop floor and in the metrology laboratory. It has three axes of travel powered by linear motor systems designed by the company. It is built with a granite structure and anodized aluminium design for precise metrology and long-term reliability

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect –a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9031 measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify the goods to subheading level 903180 other instruments, appliances and machines 8 digit code 90318020 - for measuring or checking geometrical quantities Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to heading 9031

  • UK 9031808000 Valid Feb 22, 2024 to Feb 21, 2027 · Ruling 600009919 on GOV.UK

    Trace Heating Monitoring Unit which is fully automatic and monitors the integrity of the trace heating circuits every 2.5 hours. It remains dormant until the monitoring unit detects a fault and the system automatically switches to backup circuit. There are various LED lights to the front for displaying the system status and the enclosure is plastic containing LED lamps, electronic monitoring board (PCB), switchgear MCB, wires and terminals.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRS): GIR 1 has been used to classify this product by the terms of Heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify this product to subheading level 903180 - Other instruments, appliances and machines 8 Digit Code: 90318080 - Other than for measuring or checking geometrical quantities Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to Heading 9031

  • UK 9031808000 Valid Jul 11, 2024 to Jul 10, 2027 · Ruling 600010619 on GOV.UK

    This product is called an auto-compact system, which is a digital vehicle inspection system designed for automotive production lines. This system is positioned at the end of the production line, and the auto-compact captures 100 plus images per vehicle. Post image capture, an AI algorithms detect and record damage displayed on a fully customisable user friendly dashboard.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRS): GIR 1 has been used to classify this product by the terms of Heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify this product to subheading level 903180 - Other instruments, appliances and machines 8 Digit Code: 90318080 - Other than for measuring or checking geometrical quantities Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to Heading 9031 (I) (A) (4)

  • UK 9031808000 Valid Sep 4, 2024 to Sep 3, 2027 · Ruling 600011250 on GOV.UK

    A smoke detector sensitivity tester. The tester works by circulating a dosed smoke test aerosol via the detector and measuring the smoke obscuration returning to the controller, to control the obscuration level. This process verifies the exact obscuration alarming points of each detector. The maximum working height is 6.3M. Maximum obscuration for photoelectric 19.7 percent/metre. The kit includes a main head unit and power connections. These are presented with instruction leaflets in a preformed foam case and outer bag, packaged in a cardboard carton for shipping purposes.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 5(b) has been used to identify the packaging GIR 6 has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines 8 Digit Code 903180 80 – Other than For measuring or checking geometrical quantities Also classified in accordance with: Harmonised system explanatory notes (HSENs) to Heading 9031

  • UK 9031808000 Valid Nov 25, 2024 to Nov 24, 2027 · Ruling 600011847 on GOV.UK

    The interleaved grid on the top of the DS-4C is the precipitation or “moisture" sensor. The brass cylinder protruding from the bottom of the enclosure is the temperature sensor. For reliable rain and snow detection the unit must be mounted in a location that exposes the moisture sensor to a clear view of the sky. The unit should not be mounted directly under eaves or overhangs. It should not be mounted so close to the ground that it may become buried in snow. For proper temperature detection the DS-4C must be mounted outdoors, away from sources of heat. Operating temperature range is -40°C to +85°C. Note that, when powered, the DS-4C moisture grid will always remain hot. This is normal. This allows the sensor to continuously melt snow and evaporate both rain and snow from the grid. The DS-4C can be mounted by screwing the base conduit hub onto an appropriate size free-standing conduit or by using the mounting holes in each corner of the enclosure.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines 8 Digit Code 903180 80 – Other than For measuring or checking geometrical quantities Also classified in accordance with: Harmonised system explanatory notes (HSENs) to Heading 9031

  • UK 9031808000 Valid Nov 21, 2024 to Nov 20, 2027 · Ruling 600011857 on GOV.UK

    A mechanical structure of the system is made on stainless steel AISI-316L. The scanner is engineered to operate effectively in the demanding meat processing environment. With its advanced technology, the system enhances production efficiency by providing accurate fat measurements and improving quality control. The Fat content is one of the most important parameters to control in the meat industry as they influence the nutritional value and eating quality of the meat. All parts of the system potentially in contact with meat during the operation of the system are made of food-grade materials, including the conveyor belt, and the plastic cover of the inspection tunnel. The system is an innovative Magnetic Induction scanner specifically designed for vertical scanning of meat parts, with a particular focus on hams, within production lines. Its robust design ensures reliability and ease of integration into existing production workflows, making it an essential tool for meat processors aiming to optimize their operations.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 - Has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines Digit Code: 903180 80 – Other than For measuring or checking geometrical quantities Also Classified in Accordance with: Harmonized System Explanatory Notes (HSEN's) to Heading 9031

  • UK 9031808000 Valid Dec 2, 2024 to Dec 1, 2027 · Ruling 600011943 on GOV.UK

    The Vertiv Watchdog environment monitors primarily read and log temperature and humidity levels. It is possible the watchdog series can be augmented with further sensors for tracking other parameters. The environment monitor is designed for controlled indoor environments like server rooms. These monitors play a critical role in providing real-time monitoring of environmental conditions that could potentially affect the performance of equipment such as servers, routers, switches, and other electronic devices. The Vertiv Watchdog monitors can detect and alert staff to temperature fluctuations, ensuring that the equipment stays within optimal operating ranges. Overheating can cause hardware malfunctions, degradation, or failure. The main goal of Vertiv Geist environmental monitors is to proactively detect potential risks and issues that could affect sensitive equipment. When any monitored parameter goes out of the set range (for example, when temperature, power, or humidity goes beyond a critical threshold), the watchdog system will trigger an alert via email or SMS & SNMP traps. By receiving real-time alerts, maintenance teams can take corrective actions before issues escalate.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines 8 Digit Code 903180 80 – Other than For measuring or checking geometrical quantities Also classified in accordance with: Harmonised system explanatory notes (HSENs) to Heading 9031

  • UK 9031808000 Valid Apr 2, 2025 to Apr 1, 2028 · Ruling 600012434 on GOV.UK

    Sensor. A sensor mounting for an Automatic Braking System (ABS) with sealing properties to prevent water and dirt ingress in the bearing, with a sensor fitment capability, for the (ABS). The sensor is used to transmit the bearings rotation to an (ABS). Made from plastic with brass bush and steel reinforcement. Moulded plastic with reinforced steel ring with brass bush. Packaged in poly bag and cardboard box.

    Justification

    For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter, profile projectors. GIR 5(b) has been used to identify the packaging. a cardboard box. GIR 6 has been used to classify the goods to subheading level 9031.80 - Other instruments, appliances and machines. 8-digit code 90318080 – Other than for measuring or checking geometrical quantities. Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to Chapter 90 General notes (F) 3.

  • UK 9031808000 Valid Apr 8, 2025 to Apr 7, 2028 · Ruling 600012742 on GOV.UK

    The Military Test Set is a versatile test set used primarily for testing, simulating, and analyzing various avionics systems. The device is designed to be lightweight, portable, and user-friendly, making it a valuable tool for avionics maintenance and testing. The military test set is specifically designed for military use. It is capable of comprehensive testing, simulation, and analysis of various military avionics systems, including IFF (Identification Friend or Foe) modes, TCAS (Traffic Collision Avoidance System), and TACAN (Tactical Air Navigation) systems12. It also supports Mode 4 and Mode 5 testing, which are critical for military operations. Additionally, the product includes features like built-in bays for KIV-77 and KIV-78 crypto appliqués, making it suitable for secure military communications testing. Key functions: Interrogator/Transponder Testing: It supports testing for Modes 1, 2, 3A, C, S, EHS, ADS-B TX and RX, and Mode 5. TCAS Testing: It can test TCAS I, TCAS II, and E-TCAS systems. TACAN Testing: It performs comprehensive testing of TACAN receiver transmitters in A/A, G/A, and A/A BCN modes. Crypto Testing: It includes built-in bays for KIV-77 and KIV-78 crypto appliqués for Mode 4 and Mode 5 testing. ADS-B Compliance: It tests ADS-B systems in compliance with RTCA DO-260 A and B requirements. Remote Diagnostics: It supports remote diagnostic testing and downloading of test results to a PC via USB connection.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 3 (c) - Has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff. GIR 6 - Has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines. Digit Code: 903180 80 – Other than; For measuring or checking geometrical quantities Also Classified in Accordance with: Note 3 to …

  • UK 9031808000 Valid Aug 5, 2025 to Aug 4, 2028 · Ruling 600013413 on GOV.UK

    A DME Indicator is a cockpit instrument used in aviation to display information from a Distance Measuring Equipment (DME) system. Distance Measuring Equipment (DME) is a radio navigation technology that measures the slant range distance between an aircraft and a ground-based DME station. It operates in the UHF frequency band and is often paired with VOR (VHF Omnidirectional Range) systems. A typical DME indicator displays: Distance: In nautical miles (NM), showing how far the aircraft is from the DME station. Ground Speed: Calculated based on the rate of change of distance. Time to Station: Estimated time (in minutes) to reach the station at current speed.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 3 (c) - Has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff. GIR 6 - Has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines. Eight Digit Code: 903180 80 – Other than; For measuring or checking geometrical quantities Also Classified in Accordance with: Harmonised …

  • UK 9031808000 Valid Feb 20, 2026 to Feb 19, 2029 · Ruling 600014842 on GOV.UK

    The product is an Mobile digital data logger of vehicle data, which is a Mobile Digital Recorder (MDR) It is based on a Linux embedded operating system. It is designed for automotive monitoring and fleet management. With a 1tb SSD (solid state drive) or HDD (hard disk drive), which can be upgraded to 2tb. The data collected from on board sensors and from cameras, includes driver performance, vehicle information and location/route data. It connects to the vehicle bus or analog sensors and collects data in real-time, and features auto download via Wi-Fi, 3g/4g or via USB on return of the vehicle to base. It transmits the data wirelessly, at scheduled times, in the event of an incident, or on user command sent with software or stored locally on SD cards/HDD. It sends urgent email alerts to specified addresses in the event of pre-determined incidents. The vehicle data collected by the data logger is encrypted and compressed to ensure security and minimize storage size. It can be used to: efficiently manage fleet vehicles. Track accidents and incidents with built-in g-sensor. Instantly warn fleet manager of accidents and pre-determined incidents; alert fleet manager to vehicle theft or misuse (geofencing); trace vehicle location and route. Proactively enhance driver safety through performance tracking; it provides evidence in the event of accident or incident. It has GPS for location, monitoring and tracking on playback. Is shock resistant. It is based on a Linux embedded operating system. With an operating voltage 8.5 to 32 vdc. Weight 2.7 kg. Dimensions 190mm (W) x 223mm (D) x 82mm (H). This new model is not identical, to previous model the additions are that instead of just 4 standard cameras, there is also an option to use 4 IP cameras or a mixture of the 2, up to 8 in total. Also, the internal chipsets have been upgraded for better performance. However, the system’s base function remains the same. It’s still a tracking system with video recording functionality.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1- Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 6 - Has been used to classify this product by the terms of heading 9031 80 - Other instruments, appliances and machines. Digit Code: 903180 80 - Other than; for measuring or checking geometrical quantities. Also Classified in Accordance with: Note 3 to Chapter 90 Harmonized System Explanatory Note (HSENs) to Heading 9031

  • UK 9031808000 Valid Mar 30, 2026 to Mar 29, 2029 · Ruling 600015016 on GOV.UK

    This product is a motor speed sensor (Sin/Cos encoder) which is specifically designed to suit a specific manufacturer motor, it will not interface with any motor manufacturer product. It is used to detect the direction of rotation and the speed of the motor rotor against the motor stator and feed this information back to the motor controller (separate product). The motor can be used in a variety of applications, not only for motor vehicles. This product is generally sourced as a spare part for a motor, and it is part of the motor assembly when motors are purchased as new. The encoder includes an encapsulated PCB board, rubber, wiring, connector and pins, magnet for pickup from rotor shaft bung. The encoder is procured as a bought‑in component, and full manufacturing details are not available. The central star shaped rubber bung interfaces with the motor rotor and as the motor is driven, the rubber bung spins and the PCB board picks up the magnet identifying the direction and rpm which provides feedback to the motor controller (separate supply) which then allows accurate control of the motor. This part is packaged generally in a plastic bag for protection and packaged to suit quantities purchased.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 5 (b) - Has been used to identify the type of packaging and normal for transport GIR 6 - Has been used to classify the goods to subheading level 9031.80 - Other instruments, appliances and machines 8 Digit Code 9031.80.80 – Other than for measuring or checking geometrical quantities

  • UK 9031808000 Valid Jul 16, 2026 to Jul 15, 2029 · Ruling 600015353 on GOV.UK

    A web-enabled multichannel temperature and humidity module. This is an industrial Ethernet monitoring controller designed to interface with external temperature and humidity sensors. The device collects environmental data from multiple connected sensors and transmits the information over an Ethernet network for remote monitoring and control. It supports Power over Ethernet (PoE) in accordance with IEEE 802.3af, allowing both power and data communication through a single network cable. The module includes an embedded web server for browser-based configuration, data logging, alarm notifications, and system integration via standard network protocols. It is commonly used for environmental monitoring in data centers. This web-enabled multichannel temperature and humidity module functions primarily as a web-enabled monitoring and communication module rather than as a standalone temperature or humidity sensor. It connects to multiple external 1-Wire temperature and humidity sensors, collects and logs their measurements, applies monitoring and alarm functions, and makes the data available over an Ethernet network. Data communication is one of this products primary functions. In addition to collecting, logging, and monitoring temperature and humidity measurements from connected sensors, it communicates sensor data to third-party software, servers, building management systems, PLCs, and cloud platforms through its Ethernet interface and supported open protocols. This communication capability is a core feature of the device and a significant part of its intended use. This module is a base unit that provides one-wire bus for up to 16 temperature and/or humidity sensors. The module would typically be packaged as an electronic instrumentation device using standard protective packaging for sensitive electronics.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRS): GIR 1 has been used to classify this product by the terms of Heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify this product to subheading level 903180 - Other instruments, appliances and machines 8 Digit Code: 90318080 - Other than for measuring or checking geometrical quantities Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to Heading 9031

  • UK 9031808000 Valid May 18, 2026 to May 17, 2029 · Ruling 600015354 on GOV.UK

    The Room Alert 12SR Networked Environment Monitor is a secure, rack‑mountable device designed to continuously monitor critical environmental conditions such as temperature, humidity, power, and more. It supports multiple external sensors, enabling real‑time tracking of up to eight additional parameters and integration with optional power or analogue sensors. The device features a web-based interface for easy configuration and data viewing, and it can send automated alerts via email, SMS, SNMP traps, or third-party systems whenever conditions exceed predefined thresholds. With secure network connectivity, flexible deployment options including Power-over-Ethernet (POE), and compatibility with cloud and SNMP-based monitoring platforms, the Room Alert is ideal for protecting server rooms, data centres, network cabinets, and other critical facilities by ensuring timely detection of environmental changes and helping prevent equipment damage or downtime. Normal Protective Packing, classified with the goods.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 5(b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 903180 - Other instruments, appliances and machines 8 Digit Code 90318080 - Other than for measuring or checking geometrical quantities Also classified in accordance with: Harmonised System Explanatory Notes to heading 9031

  • UK 9031808000 Valid May 19, 2026 to May 18, 2029 · Ruling 600015411 on GOV.UK

    A vet-test service kit that operates at a low electrical voltage of 24v and supplied with an external power unit. The weights, plastic pressure testing components, and foam inserts are uniquely manufactured to order. These items are utilised for tailored maintenance and calibration of Vet-Dock anaesthetic capture devices, typically carried out at the client's premises. The Vet-Dock service encompasses equipment testing. This kit facilitates diagnostic inspections and the routine servicing of Anaesthetic Capture Devices. As part of the service process, the equipment is tested before use. Case dimensions are 400mm x 325mm x 175mm. The kit is presented in a robust, hard plastic protective case which is clearly marked.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 5b has been used to identify the type of packaging and normal for transport GIR 6 has been used to classify the goods to subheading level 903180 - Other instruments, appliances and machines 8 digit code 90318080 – Other than for measuring or checking geometrical quantities Also Classified in Accordance with: Note 2b to chapter 90 Harmonised System Explanatory Notes (HSENs) to Heading 9033 Harmonised System …

  • UK 9031808000 Valid May 19, 2026 to May 18, 2029 · Ruling 600015412 on GOV.UK

    A SID-test service kit that operates at a low electrical voltage of 24v and supplied with an external power unit. The weights, plastic pressure testing components, and foam inserts are uniquely manufactured to order. These items are utilised for tailored maintenance and calibration of SID-Dock anaesthetic capture devices, typically carried out at the client's premises. The service encompasses equipment testing. This kit facilitates diagnostic inspections and the routine servicing of Anaesthetic Capture Devices. As part of the service process, the equipment is tested before use. Case dimensions are 400mm x 325mm x 175mm. The kit is presented in a robust, hard plastic protective case which is clearly marked.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 5b has been used to identify the type of packaging and normal for transport GIR 6 has been used to classify the goods to subheading level 903180 - Other instruments, appliances and machines 8 digit code 90318080 – Other than for measuring or checking geometrical quantities Also Classified in Accordance with: Note 2b to chapter 90 Harmonised System Explanatory Notes (HSENs) to Heading 9033 Harmonised System …

  • UK 9031808000 Valid Apr 28, 2026 to Apr 27, 2029 · Ruling 600015443 on GOV.UK

    A Load cell or force sensor is a devise which converts load or force into electrical signals. It is manufactured from stainless steel with a threaded centre hole that runs from the top to the bottom for mounting purposes. The cell utilises two stabilising diaphragms which are welded to the internal load cell to reduce off centre and side loading effects. This can be hermetically sealed for added durability. The load cell operates by ben mounted on a hard flat surface where it can measure forces applied to the centre of the cell.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 6 - Has been used to classify this product by the terms of heading 9031 80 - Other instruments, appliances and machines. Digit Code: 903180 80 - Other than; For measuring or checking geometrical quantities. Also Classified in Accordance with: Harmonized System Explanatory Notes (HSEN's) (30) to Heading 9031

  • UK 9031900000 Valid Feb 12, 2026 to Feb 11, 2029 · Ruling 600014496 on GOV.UK

    An encoder bearing which is an Integrated Belt Starter Generator (IBSG) used in a passenger vehicle to measure rotation for the angular position of the generator shaft. It is made of Steel Plate Cold Commercial (SPCC) steel (or equivalent) and Hydrogenated Nitrile Butadiene Rubber (HNBR), and ferrite. It is not a permanent magnet.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify the goods to subheading level 903190 - parts and accessories Also classified in accordance with: Section XVI Note (m) Harmonised System Explanatory Notes (HSEN's) to heading 9031 Harmonised System Explanatory Notes (HSEN's) to heading 8409 (c) Harmonised System Explanatory Notes (HSEN's) to heading 8505

  • UK 9031900000 Valid Oct 22, 2026 to Oct 21, 2029 · Ruling 600016103 on GOV.UK

    A dedicated wheel-diameter measuring gauge designed to operate with an optical railway wheelset measuring system. The gauge is positioned on the wheel during measurement and assists the system’s handheld sensor in determining the wheel diameter. The measurement data is transferred to the sensor and displayed on a tablet. The gauge does not incorporate the principal optical sensor and cannot perform the complete measuring function independently.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 6 - Has been used to classify the goods to subheading level 903190 - parts and accessories. Also classified in accordance with: Chapter 90 to Note 2(b). Harmonized System Explanatory Notes (HSEN) to heading 9031 - parts and accessories.

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 9031000000

  • Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 9031

    Art. 3i, goods generating significant revenue for Russia

    Read the act on EUR-Lex
  • Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 9031

    Art. 3k, goods contributing to Russian industrial capacity

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 % maybe 3 %, 5 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 % maybe 9 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 903100 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors", it is crucial to have the correct HS code or TARIC code. The HS code 9031000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors".
  2. Check if any additional licenses, permits, or certificates are required to import "Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors" is 9031000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors".

HS Code structure

90
Chapter
31
Heading
00
Subheading
00
CN Subheading
00
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 90 was selected for optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 31 refers to Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors.

HS Code tree structure

9000000000 80

Chapter OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; PARTS AND ACCESSORIES THEREOF

9031000000 80

Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors

9031100000 80

- Machines for balancing mechanical parts

9031200000 80

- Test benches

9031410000 10

- Other optical instruments and appliances

9031410000 80

- - For inspecting semiconductor wafers or devices (including integrated circuits) or for inspecting photomasks or reticles used in manufacturing semiconductor devices (including integrated circuits)

9031490000 80

- - Other

9031491000 80

- - - Profile projectors

9031499000 80

- - - Other

9031800000 80

- Other instruments, appliances and machines

9031802000 80

- - For measuring or checking geometrical quantities

9031808000 80

- - Other

9031900000 80

- Parts and accessories