Import trade restrictions for 9401000000 80
This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.
| Origin country | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
2027 | GSP+ (incentive arrangement for sustainable development and good governance) 2027 | 01-01-2014 | 0 % | Tariff preference 142 |
2020 | GSP - General arrangements 2020 | 01-01-2015 | 0 % | Tariff preference 142 |
| Iraq IQ Furniture, between 50 and 100 years old, other than those covered by the additional codes 4008, 4010, 4011, 4013, 4023, 4040 - 4048 | 23-05-2003 | Restriction on entry into free circulation 465 | ||
| Syria SY Furniture, between 50 and 100 years old, other than those covered by the additional codes 4008, 4010, 4011, 4013, 4023, 4040 - 4048 | 29-05-2025 | Restriction on entry into free circulation 465 | ||
| Syria SY Other than those mentioned in Regulation (EC) no 1332/2013 (OJ L 335): no restrictions | 29-05-2025 | Restriction on entry into free circulation 465 | ||
| Iraq IQ Other than those mentioned in Regulation (EC) no 1210/2003 (OJ L 169): no restrictions | 23-05-2003 | Restriction on entry into free circulation 465 | ||
| Faroe Islands FO | 01-01-1997 | 0 % | Tariff preference 142 | |
XL | Melilla XL | 01-01-1999 | 0 % | Accession act0001/85 Tariff preference 142 |
| Occupied palestinian Territory PS | 01-01-2001 | 0 % | Tariff preference 142 | |
| Türkiye TR | 01-01-2006 | 0 % | Customs union duty 106 | |
| Andorra AD | 01-01-2006 | 0 % | Customs union duty 106 | |
| San Marino SM | 01-01-2006 | 0 % | Customs union duty 106 | |
| EU-Switzerland agreement: re-imported goods 1007 | 01-01-2007 | 0 % | Tariff preference 142 | |
2005 | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005 | 01-01-2014 | 0 % | Tariff preference 142 |
| Moldova, Republic of MD | 01-01-2016 | 0 % | Tariff preference 142 | |
| Ecuador EC | 01-01-2017 | 0 % | Tariff preference 142 | |
| United Kingdom GB | 01-01-2021 | 0 % | Tariff preference 142 | |
2080 | OCTs (Overseas Countries and Territories) 2080 | 01-01-2021 | 0 % | Tariff preference 142 |
| Singapore SG | 01-01-2027 | 0 % | Tariff preference 142 | |
| Ghana GH | 01-01-2027 | 0 % | Tariff preference 142 | |
| Chile CL | 01-02-2025 | 0 % | Tariff preference 142 | |
| Tunisia TN | 01-03-1998 | 0 % | Tariff preference 142 | |
| Morocco MA | 01-03-2000 | 0 % | Tariff preference 142 | |
| Lebanon LB | 01-04-2006 | 0 % | Tariff preference 142 | |
| Jordan JO | 01-05-2002 | 0 % | Tariff preference 142 | |
| Egypt EG | 01-06-2004 | 0 % | Tariff preference 142 | |
XC | Ceuta XC | 01-07-1991 | 0 % | Accession act0001/85 Tariff preference 142 |
2012 | EEA - European Economic Area 2012 | 01-07-2007 | 0 % | Tariff preference 142 |
| Korea, Republic of (South Korea) KR | 01-07-2011 | 0 % | Tariff preference 142 | |
| Mexico MX | 01-07-2016 | 0 % | Tariff preference 142 | |
| Kenya KE | 01-07-2024 | 0 % | Tariff preference 142 | |
| United States US | 01-07-2026 | 0 % | Tariff preference 142 | |
| Syria SY | 01-08-1994 | 0 % | Tariff preference 142 | |
2200 | Central America 2200 | 01-08-2013 | 0 % | Tariff preference 142 |
| Viet Nam VN | 01-08-2020 | 0 % | Tariff preference 142 | |
| Algeria DZ | 01-09-2005 | 0 % | Tariff preference 142 | |
| Georgia GE | 01-09-2014 | 0 % | Tariff preference 142 | |
1011 | ERGA OMNES 1011 | 01-11-2026 | 2 EUR | Union handling fee 800 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 3 EUR | Low-value consignment customs duty 107 |
| Ivory Coast CI | 02-12-2019 | 0 % | Tariff preference 142 | |
2000 | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000 | 03-10-2025 | 0 % | Tariff preference 142 |
| Cameroon CM | 04-08-2014 | 0 % | Tariff preference 142 | |
1035 | SADC EPA 1035 | 10-10-2016 | 0 % | Tariff preference 142 |
| South Africa ZA | 10-10-2016 | 0 % | Tariff preference 142 | |
| Armenia AM | 10-10-2026 – 11-10-2028 | 0 % | Tariff preference 142 | |
1034 | Eastern and Southern Africa States 1034 | 14-05-2012 | 0 % | Tariff preference 142 |
| Ghana GH | 15-12-2016 – 31-12-2026 | 0 % | Tariff preference 142 | |
| Israel IL | 16-05-2023 | 0 % | Tariff preference 142 | |
| Solomon Islands SB | 17-05-2020 | 0 % | Tariff preference 142 | |
| Switzerland CH | 20-12-1972 | 0 % | Tariff preference 142 | |
| Papua New Guinea PG | 20-12-2009 | 0 % | Tariff preference 142 | |
| Singapore SG | 21-11-2019 – 31-12-2026 | 0 % | Tariff preference 142 | |
| Fiji FJ | 28-07-2014 | 0 % | Tariff preference 142 | |
1033 | CARIFORUM 1033 | 29-12-2008 | 0 % | Tariff preference 142 |
| Samoa WS | 31-12-2018 | 0 % | Tariff preference 142 |
| Origin country | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
1011 | ERGA OMNES 1011 | 15-08-2009 | Document required banned without it | Import control on cat and dog fur 745 |
| Russian Federation RU | 19-12-2023 – 31-12-2027 | Document required banned without it | Import control 762 | |
| Belarus BY | 25-02-2025 | Document required banned without it | Import control 760 | |
| Ukraine UA | 24-06-2026 | Document required banned without it | Import control 762 | |
| Ukraine UA | 24-06-2026 | Document required banned without it | Import control 760 |
Explanation of trade restrictions
Erga Omnes means "for all".
Third countries are countries that are not part of the EU.
GSP means "Generalised System of Preferences".
GSP Plus means "Generalised System of Preferences Plus".
European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.
OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information
CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.
SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".
Duty means "customs duties".
Estimate the import cost for 9401000000
- Customs value €1,000.00
- No third-country duty is recorded for this origin.
- Import VAT 19 % €190.00
- Total €1,190.00
Documents and checks for China
- Import control on cat and dog fur: Document required, banned without it Y922
An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.
Export measures for 9401000000
What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.
| Destination | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
1008 | All third countries 1008 Furniture, between 50 and 100 years old, other than those covered by the additional codes 4008, 4010, 4011, 4013, 4023, 4040 - 4048 | 01-01-2007 | Restriction on export 467 | |
1008 | All third countries 1008 Other than those mentioned in Regulation (EC) no 1210/2003 (OJ L 169): no restrictions | 01-01-2007 | Restriction on export 467 |
| Destination | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
1008 | All third countries 1008 | 15-08-2009 | Document required banned without it | Export control on cat and dog fur 740 |
1008 | All third countries 1008 | 02-03-2009 | Document required banned without it | Export control on cultural goods 735 |
1008 | All third countries 1008 | 15-12-2013 | Document required banned without it | Export authorization 473 |
History
Duty rates and measures for this code over time (yearly snapshots).
Preferential rules of origin for 9401000000
What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Algeria Association Agreement · Algeria
EU-Egypt Association Agreement · Egypt
EU-Jordan Association Agreement · Jordan
EU-Morocco Association Agreement · Morocco
Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye
EU-Ukraine DCFTA · Ukraine
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m 2 or less / or: Manufacture from materials of any heading, except that of the product or Manufacture from cotton cloth already made up in a form ready for use with materials of heading 9401 or 9403, provided that: the value of the cloth does not exceed 25 % of the ex-works price of the product, and all the other materials used are originating and are classified in a heading other than heading 9401 or 9403 / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland
EU-Central America Association Agreement
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m 2 or less / or: Manufacture from materials of any heading, except that of the product or Manufacture from cotton cloth already made up in a form ready for use with materials of heading 9401 or 9403, provided that: / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
the value of the cloth does not exceed 25 % of the ex-works price of the product, and all the other materials used are originating and are classified in a heading other than heading 9401 or 9403
EPA CARIFORUM
EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m 2 or less / or: Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture from cotton cloth already made up in a form ready for use of heading No 9401 or 9403, provided: / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product – its value does not exceed 25 % of the ex-works price of the product; – all the other materials used are already originating and are classified in a heading other than heading No 9401 or 9403
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan
Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
EU-Moldova DCFTA · Moldova
EU-Tunisia Association Agreement · Tunisia
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m 2 or less / or: Manufacture from materials of any heading, except that of the product or Manufacture from cotton cloth already made up in a form ready for use with materials of heading 9401 or 9403, provided that: / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product the value of the cloth does not exceed 25 % of the ex-works price of the product, and all the other materials used are originating and are classified in a heading other than heading 9401 or 9403
EU-Canada CETA · Canada
A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product.
EU-Chile Association Agreement · Chile
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m 2 or less / or: Manufacture from materials of any heading, except that of the product or Manufacture from cotton cloth already made up in a form ready for use with materials of heading 9401 or 9403, provided that: ihr Wert 25 % of the ex-works price of the product, and all the other materials used are originating and are classified in a heading other than heading 9401 or 9403 / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru
Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 55 per cent of the ex-works price of the product
EPA Eastern and Southern Africa
Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m2 or less / or: Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture from cotton cloth already made up in a form ready for use of heading No 9401 or 9403, provided: its value does not exceed 25 % of the ex-works price of the product; all the other materials used are already originating and are classified in a heading other than heading No 9401 or 9403 / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EU-Georgia DCFTA · Georgia
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m [91] or less / or: Manufacture from materials of any heading, except that of the product or Manufacture from cotton cloth already made up in a form ready for use with materials of heading 9401 or 9403, provided that: / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product the value of the cloth does not exceed 25 % of the ex-works price of the product, and all the other materials used are originating and are classified in a heading other than heading 9401 or 9403
EU-Israel Association Agreement · Israel
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m 2 or less / or: Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture from cotton cloth already made up in a form ready for use of heading No 9401 or 9403, provided: its value does not exceed 25 % of the ex-works price of the product, and all the other materials used are already originating and are classified in a heading other than heading No 9401 or 9403
EU-Iceland FTA · Iceland
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m 2 or less / or: Manufacture from materials of any heading, except that of the product or Manufacture from cotton cloth already made up in a form ready for use with materials of heading 9401 or 9403, provided that: – the value of the cloth does not exceed 25 % of the ex-works price of the product, and – all the other materials used are originating and are classified in a heading other than heading 9401 or 9403 / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EU-Korea FTA · South Korea
Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings; except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EU-Lebanon Association Agreement · Lebanon
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m 2 or less / or: Manufacture from materials of any heading, except that of the product or Manufacture from cotton cloth already made up in a form ready for use with materials of heading 9401 or 9403, provided that: the value of the cloth does not exceed 25 % of the ex-works price of the product, all the other materials used are originating and are classified in a heading other than heading 9401 or 9403 / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexico
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m 2 or less / or: Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture from cotton cloth already made up in a form ready for use of heading No 9401 or 9403, provided: its value does not exceed 25 % of the ex-works price of the product, all the other materials used are already originating and are classified in a heading other than heading No 9401 or 9403 / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palestine
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m2 or less / or: Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture from cotton cloth already made up in a form ready for use of heading No 9401 or 9403, provided: / or: Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product its value does not exceed 25% of the ex-works price of the product; all the other materials used are already originating and are classified in a heading other than heading No 9401 or 9403
EPA SADC · South Africa
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m 2 or less / or: Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture from cotton cloth already made up in a form ready for use of heading No 9401 or 9403, provided: its value does not exceed 25 % of the ex–works price of the product; all the other materials used are already originating and are classified in a heading other than heading No 9401 or 9403 / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex–works price of the product
EU-Singapore FTA · Singapore
Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EU-Viet Nam FTA · Vietnam
Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings. / or: Manufacture from materials of any heading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.
Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets
Legal and explanatory notes for 9401000000
9401 CN Explanatory Notes: Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof
This heading includes sets of a table and chairs, where the table is designed for other purposes than dining while sitting on the seats (chairs, stools, deck-chairs, armchairs, couches etc.). Generally, these tables are too small for dining and they are inferior to the seats e.g. in size. Consequently, the seats give the set its essential character within the meaning of GIR 3(b). (See also the CN Explanatory Notes to heading 9403). Examples of sets falling under heading 9401 :
9401 10 00 CN Explanatory Notes: Seats of a kind used for aircraft
Seats of this subheading are usually manufactured from light but hard-wearing materials (for example, duralumin). In most cases, they can be distinguished from seats intended for other means of transport by differences in their construction (adjustable position, special means for fixing to the floor or walls, safety belts or places provided for their installation, etc.). Ejector seats for aircraft are not regarded as seats of heading 9401 and are classified as parts of aircraft (heading 8803).
9401 90 10 CN Explanatory Notes: Of seats of a kind used for aircraft
This subheading does not cover hydraulic positioning and locking actuators used to adjust the position of seats for the crew of aircraft (subheading 8412 21 20 or 8412 21 80).
Notes to chapter 94
Notes 1. This chapter does not cover: (a) pneumatic or water mattresses, pillows or cushions, of Chapter 39, 40 or 63; (b) mirrors designed for placing on the floor or ground (for example, cheval-glasses (swing-mirrors)) of heading 7009; (c) articles of Chapter 71; (d) parts of general use as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39), or safes of heading 8303; (e) furniture specially designed as parts of refrigerating or freezing equipment of heading 8418; furniture specially designed for sewing machines (heading 8452); (f) lamps or light sources and parts thereof of Chapter 85; (g) furniture specially designed as parts of apparatus of heading 8518 (heading 8518), of heading 8519 or 8521 (heading 8522) or of headings 8525 to 8528 (heading 8529); (h) articles of heading 8714; (ij) dentists' chairs incorporating dental appliances of heading 9018 or dentists' spittoons (heading 9018); (k) articles of Chapter 91 (for example, clocks and clock cases); (l) toy furniture or toy luminaires and lighting fittings (heading 9503), billiard tables or other furniture specially constructed for games (heading 9504), furniture for conjuring tricks or decorations (other than lighting strings) such as Chinese lanterns (heading 9505); or (m) monopods, bipods, tripods and similar articles (heading 9620). 2. The articles (other than parts) referred to in headings 9401 to 9403 are to be classified in those headings only if they are designed for placing on the floor or ground. The following are, however, to be classified in the headings mentioned above, even if they are designed to be hung, to be fixed to the wall or to stand one on the other: (a) cupboards, bookcases, other shelved furniture (including single shelves presented with supports for fixing them to the wall) and unit furniture; (b) seats and beds. 3. (A) In headings 9401 to 9403 references to parts of goods do not include references to sheets or slabs (whether or not cut to shape but not combined with other parts) of glass (including mirrors), marble or other stone or of any other material referred to in Chapter 68 or 69. (B) Goods described in heading 9404, presented separately, are not to be classified in heading 9401, 9402 or 9403 as parts of goods. 4. For the purposes of heading 9406, the expression ‘prefabricated buildings’ means buildings which are finished in the factory or put up as elements, presented together, to be assembled on site, such as housing or worksite accommodation, offices, schools, shops, sheds, garages or similar buildings. Prefabricated buildings include ‘modular building units’ of steel, normally presented in the size and shape of a standard shipping container, but substantially or completely pre-fitted internally. Such modular building units are normally designed to be assembled together to form permanent buildings. Additional Note 1. For the purposes of heading 9404, the expression “stuffed or internally fitted with any material” covers material of any thickness.
Notes to section XX
MISCELLANEOUS MANUFACTURED ARTICLES
Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex
EU classification regulations for 9401000000
Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.
- 9401 99 20 Feb 7, 2012 · Regulation on EUR-Lex
A metal disc-shaped device with a diameter of approximately 8 cm and a thickness of 2 cm (so-called "round recliner").
The device has an uneven surface with a central shaft hole and it consists of the following: — a guide plate, — a spiral spring, — a hinge cam, — a slide cam, — two slide pawls, — a ratchet, and — a ring plate. It is a component of reclining mechanisms for motor vehicle seats. The device is used to adjust the angle of the seat back according to the needs of the driver or passengers and contributes to the strength of the seat. (*1) See image
Reasons
Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9401 , 9401 90 and 9401 90 80 . Given its characteristics, namely its accurate mechanical construction with several different components, the device is specifically designed to be an essential part of a reclining mechanism of a motor vehicle seat. Consequently, classification as metal mountings, fittings or similar articles under heading 8302 is excluded (see also the HS Explanatory Notes to heading 8302 , first paragraph). Consequently, the device is considered to be a part of a reclining mechanism of a motor vehicle seat. The device is therefore to be classified under CN code 9401 90 80 as other parts of seats of a kind used for motor vehicles.
Classified under 9401 90 80 at the time
- 9401 99 20 Aug 2, 2011 · Regulation on EUR-Lex
An article made of metal and plastic, designed for attaching a child safety seat to a motor vehicle (so-called "child safety seat base").
It comprises an extendable leg and a system with red/green indicators informing, for example, whether the article or the seat is correctly installed. It is for temporary attachment to anchorage points, which are fixtures generally fastened permanently to the car body at the back of a vehicle seat. The article allows different models of child safety seats to be clipped in and out. (*1) See image
Reasons
Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9401 , 9401 90 and 9401 90 80 . Classification under heading 8708 is excluded as the article is not permanently attached to the body of a motor vehicle and cannot therefore be considered an accessory of the body of a motor vehicle. When a child safety seat is mounted on the "child safety seat base", the whole presents the characteristics and performs the function of a complete child safety seat. The article is therefore to be considered a part of a child safety seat. The article is therefore to be classified under CN code 9401 90 80 as a part of a seat.
Classified under 9401 90 80 at the time
- 9401 99 20 Oct 19, 1995 · Regulation on EUR-Lex
Coverings designed to be permanently fixed to the front and rear seat-stuffing and -frames of motor vehicles, and made up as follows:
— a seat-bottom with an external surface mainly of synthetic fabric (polyester) and plastics (PVC). Inside, there is a flexible metal rod; — a seat-back with an external surface mainly of synthetic fabric (polyester) and plastics (PVC). Inside, there are: — tapes with plastic fastenings, — a rubber strap and — flexible metal rods. — a headrest-covering with an external surface mainly of synthetic fabric (polyester), and plastics (PVC). The fabric is backed with a thin layer of cellular plastic covered with polyamide net and the plastics are backed with acrylic fabric.
Reasons
Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature and by the wording of CN codes 9401, 9401 90 and 9401 90 80. These coverings should be considered as parts of seats of CN code 9401.
Classified under 9401 90 80 at the time
+ 3 more
- 9401 99 80 Feb 7, 2012 · Regulation on EUR-Lex
A metal disc-shaped device with a diameter of approximately 8 cm and a thickness of 2 cm (so-called "round recliner").
The device has an uneven surface with a central shaft hole and it consists of the following: — a guide plate, — a spiral spring, — a hinge cam, — a slide cam, — two slide pawls, — a ratchet, and — a ring plate. It is a component of reclining mechanisms for motor vehicle seats. The device is used to adjust the angle of the seat back according to the needs of the driver or passengers and contributes to the strength of the seat. (*1) See image
Reasons
Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9401 , 9401 90 and 9401 90 80 . Given its characteristics, namely its accurate mechanical construction with several different components, the device is specifically designed to be an essential part of a reclining mechanism of a motor vehicle seat. Consequently, classification as metal mountings, fittings or similar articles under heading 8302 is excluded (see also the HS Explanatory Notes to heading 8302 , first paragraph). Consequently, the device is considered to be a part of a reclining mechanism of a motor vehicle seat. The device is therefore to be classified under CN code 9401 90 80 as other parts of seats of a kind used for motor vehicles.
Classified under 9401 90 80 at the time
- 9401 99 80 Aug 2, 2011 · Regulation on EUR-Lex
An article made of metal and plastic, designed for attaching a child safety seat to a motor vehicle (so-called "child safety seat base").
It comprises an extendable leg and a system with red/green indicators informing, for example, whether the article or the seat is correctly installed. It is for temporary attachment to anchorage points, which are fixtures generally fastened permanently to the car body at the back of a vehicle seat. The article allows different models of child safety seats to be clipped in and out. (*1) See image
Reasons
Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9401 , 9401 90 and 9401 90 80 . Classification under heading 8708 is excluded as the article is not permanently attached to the body of a motor vehicle and cannot therefore be considered an accessory of the body of a motor vehicle. When a child safety seat is mounted on the "child safety seat base", the whole presents the characteristics and performs the function of a complete child safety seat. The article is therefore to be considered a part of a child safety seat. The article is therefore to be classified under CN code 9401 90 80 as a part of a seat.
Classified under 9401 90 80 at the time
- 9401 99 80 Oct 19, 1995 · Regulation on EUR-Lex
Coverings designed to be permanently fixed to the front and rear seat-stuffing and -frames of motor vehicles, and made up as follows:
— a seat-bottom with an external surface mainly of synthetic fabric (polyester) and plastics (PVC). Inside, there is a flexible metal rod; — a seat-back with an external surface mainly of synthetic fabric (polyester) and plastics (PVC). Inside, there are: — tapes with plastic fastenings, — a rubber strap and — flexible metal rods. — a headrest-covering with an external surface mainly of synthetic fabric (polyester), and plastics (PVC). The fabric is backed with a thin layer of cellular plastic covered with polyamide net and the plastics are backed with acrylic fabric.
Reasons
Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature and by the wording of CN codes 9401, 9401 90 and 9401 90 80. These coverings should be considered as parts of seats of CN code 9401.
Classified under 9401 90 80 at the time
UK advance tariff rulings for 9401000000
Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.
- UK 9401100000 Valid Aug 3, 2026 to Aug 2, 2029 · Ruling 600015894 on GOV.UK
A seat meant to replicate as much of the physical and mechanical parts of an ejection seat unit as possible without being able to eject or be installed into an aircraft. It is to be used for demonstration and practice before working on a fully functional ejection unit. The seat is used to train maintenance engineers on how to maintain, repair and overhaul an ejection seat. The seat can not be used as actual ejection seats as they have no active pyrotechnics included in their construction. It is possible to sit within the seat, though this is not its primary function. The difference is in how the seats are used. As the seat is considered to have the essential characteristic of the finished goods, it is constructed with a metal structure/frame.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 2 A – Has been used as the goods are incomplete. GIR 6 - Has been used to classify the goods to subheading level 9401 10 - Seats of a kind used for aircraft. Also classified in accordance with: Note C to Section XVII - Parts/Accessories Harmonized System Explanatory Notes (HSEN’s) to 9401
- UK 9401100000 Valid Aug 3, 2026 to Aug 2, 2029 · Ruling 600015895 on GOV.UK
A training seat used in egress/post-egress training. This is a course where pilots learn the decision process for ejecting, post-ejection procedures and other instruction on how to use their ejection seats. The item is the seat the pilots sit in while they receive this instruction. It is intended to resemble an actual ejection seat but lacks any ability to eject or function as an ejection seat, it can not be used as actual ejection seats as they have no active pyrotechnics included in their construction. However, sitting in an trainer seat is an integral part of its primary purpose. The difference is in how the seats are used. As the seat is considered to have the essential characteristic of the finished goods. it is constructed with a metal structure/frame.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 2 A – Has been used as the goods are incomplete. GIR 6 - Has been used to classify the goods to subheading level 9401 10 - Seats of a kind used for aircraft. Also classified in accordance with: Note C to Section XVII - Parts/Accessories Harmonized System Explanatory Notes (HSEN’s) to 9401
- UK 9401200000 Valid Feb 13, 2025 to Feb 12, 2028 · Ruling 600012393 on GOV.UK
Seats for the use within the rear of an ambulance. The seats include an integrated child seat with seat belt. Made with a seamless vinyl finish. Steel frame with foam cushioning. Supplied either with or without pedestal or base. Can be supplied with or without seat pad occupant sensors and circuited buckle. Seats will be packaged in cardboard boxes.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof GIR 5 (b) - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 940120 - Seats of a kind used for motor vehicles Also classified in accordance with: Note 2 (b) to Chapter 94 Harmonised system explanatory notes (HSENs) to Heading 9401
+ 19 more
- UK 9401200000 Valid Jun 16, 2026 to Jun 15, 2029 · Ruling 600015719 on GOV.UK
A kit containing the components required for a trained individual to make a custom moulded racing car seat. The kit is comprised of a bag of bead with a connection tap, bottles of clear resin and brown resin, covering material and strips of edging tape. Supplied as either a large or small size. T o create a seat from the kit the bottles of resin are mixed and then added to the bag of bead. The bag of bead is moulded to shape and then the resin sets. Once the seat is set the covering material and strips of edging tape are used to cover the seat. The resin required for each kit will be packaged together in a sealed plastic bag.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof GIR 2A - has been used as the goods are unassembled GIR 5 (b) - has been used to identify the type of packaging - Kit packaged together in a sealed plastic bag. GIR 6 - has been used to classify the goods to subheading level 940120 - Seats of a kind used for motor vehicles Also classified in accordance with: Note 2 (b) to Chapter 94 Harmonised system explanatory notes (HSENs) to Heading 9401
- UK 9401610000 Valid Mar 19, 2024 to Mar 18, 2027 · Ruling 600009850 on GOV.UK
Rare ‘Curva Sofa’, circa 1960 by the acclaimed Portuguese and Brazilian designer Joaquim Tenreiro. The sofa is made from fabric, iron and the internal frame of the sofa is wood. Measurements of the Sofa are 71x165x79 cm. This sofa demonstrates the influences of European modernism in its form, which is sculptural and simplistic in its structure, and serves as an absolute example of Tenreiro’s fusion of European design notions with local Brazilian materials and lifestyle ideals. Tenreiro is often referred to as the father of Brazilian modernism. The furniture designer was born in Portugal and moved to Rio de Janeiro in the late 1920s. In the early 1940s, he established his studio, and by the 1950s, he was designing furniture for modern architects. The sofa is documented in the book by Soraia Cals, Tenreiro (1998). This item is a product of a person who was born in Portugal and lived in Rio de Janeiro and designed and created several items of household furniture
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading Heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 6 has been used to classify the goods to subheading level 940161 - Other seats, with wooden frames; upholstered. Also classified in accordance with: Note A(3) to Heading 9705 Harmonised Standard Explanatory Notes (HSENs) to Heading 9401
- UK 9401610000 Valid Jan 12, 2026 to Jan 11, 2029 · Ruling 600013826 on GOV.UK
A pair of sofas They are made from teak, painted brass, brass, painted metal, fabric. These sofas were made in 1955 by Studio B.B.P.R. in Italy.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading Heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 6 has been used to classify the goods to subheading level 940161 - Other seats, with wooden frames; upholstered. Also classified in accordance with: Chapter Notes 2 & 2b to Chapter 94 General Notes (A) to Chapter 94 Harmonised System Explanatory Notes (HSENs) to Heading 9401 Harmonised System Explanatory Notes (HSENs) Notes (A) (3) to Heading 9705
- UK 9401690000 Valid Apr 8, 2024 to Apr 7, 2027 · Ruling 600009851 on GOV.UK
A wooden chair made solely of pine. It was designed by architect and designer Lina Bo Bardi. The chair was made for the Serviço Social do Comércio (SESC) in Pompéia, São Paulo, Brazil. The dimensions of the chair are 69.9cm x 39.4cm x 51.4cm.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 6 - has been used to classify the goods to subheading level 940169 - Other seats, with wooden frames, other than upholstered. Also classified in accordance with: Harmonized System Explanatory Notes (HSEN) to Chapter 94 - Note 2. Harmonized System Explanatory Notes (HSEN) to Chapter 94 - General Note (1) and General Note (A). Harmonized System Explanatory Notes (HSEN) to heading 9401. Harmonized System Explanatory Notes (HSEN) to heading 9705 - …
- UK 9401710000 Valid Feb 13, 2024 to Feb 12, 2027 · Ruling 600009721 on GOV.UK
An activity set for entertaining baby, consisting of a baby seat that bounces, swivels and rocks and other toys for entertaining a baby. It has more than 20 activities included for the baby's development, and has removable toys for the baby's play. It also features a cloud which lights up that tracks the baby's movement of bounces, and rewards with lights and sounds. The seat rotates 360 degrees; it is adjustable for up to 5 heights to accommodate the baby's growth. It is made of plastic. It folds away for easy storage and electrically operated. It measures H78 x W85 x D88cm and is packed in a cardboard box.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg (1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 3(b) has been used as the seat is the essential character. GIR 5(b) has been used to identify the type of packaging. Product is packed in a cardboard box. GIR 6 has been used to classify the goods to subheading level 940171 - Other seats, with metal frames; Upholstered; Also classified in accordance with The Harmonised System Explanatory Notes (HSENs) to 9401 refers. WCO Opinions to subheading 940171.
- UK 9401710000 Valid Apr 5, 2024 to Apr 4, 2027 · Ruling 600009901 on GOV.UK
An Armchair and Ottoman, circa 1994, made of gilded iron and fabric which are of great interest to collectors of French design and contemporary design. The influences of Baroque design and also from natural motifs are both present in the gilded forged metal frame of these pieces, which together present an unexpected combination of opulent and organic. They are designed by French interior designer Elizabeth Garouste and Swiss-born designer Mattia Bonetti. The pair developed a distinctive style influenced by ideals of contrast and contradiction, as well as surreal eclecticism with a witty and elegant flair. The resulting pieces are quirky yet grand, sophisticated and luxurious in their sumptuous materiality while presenting avant-garde notions that set their works apart from other designers.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof GIR 6 - Has been used to classify the goods to subheading level 940171 - Other seats, with metal frames; Upholstered Also classified in accordance with: Harmonized System Explanatory Notes (HSENs) to heading 9401
- UK 9401710000 Valid Apr 3, 2024 to Apr 2, 2027 · Ruling 600009904 on GOV.UK
A set of Six chairs Circa 1947 made by French designer Gilbert Poillerat (1902-1988). Gilbert Poillerat was one of the most significant and original figures of Twentieth-Century design. They are made from Iron and Bronze and upholstered in fabric. Each chair’s measurements are 84x45x55cm (33 1/8 x 17 ¾ x 21 5/8 in) These chairs demonstrate a distinctive example of the artist’s more minimalistic forms, placing more focus on the simplicity of craftsmanship to highlight the artistry of the two-toned patinated and gilt brass. These chairs are a product of a person who was born in France and lived and worked in France and designed and created a number of ironwork items.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg (1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 6 has been used to classify the goods to subheading level 940171 - Other seats, with metal frames; Upholstered; Also classified in accordance with Note A(3) to Heading 9705 Harmonised System Explanatory Notes (HSENs) to 9401
- UK 9401710000 Valid Jun 6, 2024 to Jun 5, 2027 · Ruling 600010563 on GOV.UK
Rise & recline chairs, for use in nursing homes & hospitals, it has a two way action motor to assist in the reclining and elevating movements. The mechanical part of the chair frame is metal, but there are also wooden parts, it is upholstered. The chair is to be placed on the floor
Justification
Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR’s) Gir 1 has been used to classify this product by the terms of heading 9401 - seats (other than those of heading 94.02), whether convertible into beds, and parts thereof: Gir 6 has been used to classify to subheading level 940171 - other seats with metal frames - upholstered. Also classified in accordance with: - Chapter 94 Note 2 Harmonised System Explanatory Notes (HSEN) heading 9401
- UK 9401710000 Valid Oct 14, 2025 to Oct 13, 2028 · Ruling 600013665 on GOV.UK
The ‘Direction’ armchair, made circa 1951 is made from painted steel frame attached are oak arms, with a leather upholstery and rubber which was designed for offices and classrooms remains one of Prouvé’s most invaluable contributions to twentieth-century furnishings. Jean Prouvé (1901-1984) was a French metal worker, architect, and designer. His work is recognized around the world for blending architecture and engineering to create what are now considered iconic pieces of Mid-Century French Design. Prouvé's works regularly achieve record breaking results at auction, demonstrating their high demand amongst collectors of art and design. Prouvé’s work is highly collectible today not only because of its timeless style, but also because of its rarity and historical importance. The Museum of Modern Art in New York has a Prouvé ‘Direction’ armchair in their collection, however it is not this actual chair of this application. It was last bought in the USA in 2006. A famous fashion designer had this model armchair in his collection. It is valued at £35,000. There are 200 of this particular model of chair still in circulation. Dimensions 31 3/4 x 24 1/4 x 23 1/2 in. (80.6 x 61.6 x 59.7 cm)
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1- Has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 3b - Has been used as the essential character - 'Metal Frame' - The essential character is the product rather than the person who made it. GIR 6 - Has been used to classify this product by the terms of heading 9401 71 - Other seats, with metal frames; upholstered. Also Classified in Accordance with: Note 2(b) to Chapter 94 Harmonized System Explanatory Note (HSENs) to Heading 9401 Harmonized System Explanatory Note (HSENs) (A) & (3) to Heading 9705
- UK 9401710000 Valid Jun 19, 2026 to Jun 18, 2029 · Ruling 600015767 on GOV.UK
A riser recliner chair with a metal frame, wooden parts and a fabric upholstery, designed to assist elderly or disabled users by providing reclining and powered lift functionality to help the user sit down and rise safely. The chair incorporates a USB port in the armrest; however, this is an ancillary convenience feature and does not alter the essential character of the article as an upholstered seat with a metal frame. what the chair has: Simple hand control / remote, with two buttons and contrast symbols/colours. USB port / USB charger for charging a phone or tablet. Lockable swivel function. Base/socket plate for stability during rising from the chair. Adjustable lift type — supplied with angled lift, but can be adjusted to straight lift. Height-adjustable chair, adjustable upper back, adjustable seat width, lowerable armrests and depth-adjustable seat. The chair is to be placed on the floor
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect –a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 9401 - seats (other than those of heading 94.02), whether convertible into beds, and parts thereof. GIR 6 - Has been used to classify to subheading level 940171 - other seats with metal frames - upholstered. Also classified in accordance with: Chapter 94 Note 2. Harmonised System Explanatory Notes (HSEN) heading 9402 note (B). Harmonised System Explanatory Notes (HSEN) heading 9401.
- UK 9401790000 Valid Mar 20, 2024 to Mar 19, 2027 · Ruling 600009809 on GOV.UK
A armchair which is constructed from a painted Iron frame with an covered in nylon netting, (is not sufficient to cause the seat to be classified as upholstered) and feet made of rubber, which provides comfortable support without sacrificing strength or functionality. The chair is lightweight and has a transparent seat made of nylon threads. The product is intended to be placed on the floor and is used to furnish apartments. The armchair is considered to be seating furniture, with a metal frame not upholstered.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 6 - Has been used to classify the goods to subheading level 9401 79 - Other seats, with metal frames; Other than Upholstered. Also Classified in Accordance with: Note A (3) to Heading 9705 Note 2 (b) to Chapter 94 Harmonized System Explanatory Notes (HSENs) to Heading 9401 - Subheading 9401.61 & 9401.71 - Upholstered Seats.
- UK 9401790000 Valid Apr 9, 2024 to Apr 8, 2027 · Ruling 600010184 on GOV.UK
A folding camping chair. It has an iron frame and is covered with 600D Oxford fabric. It comes with a drawstring fabric bag for packing the chair into when not in use. It is packaged with an information insert card.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 5b - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 940179 - Other seats, with metal frames: Other than upholstered. Also classified in accordance with: Harmonized System Explanatory Notes (HSEN) to Chapter 94 - Note 2. Harmonized System Explanatory Notes (HSEN) to heading 9401 and subheading explanatory notes to 9401.61 and 9401.71.
- UK 9401790000 Valid Jan 9, 2026 to Jan 8, 2029 · Ruling 600013943 on GOV.UK
Set Of Six Chairs Made in 1941 from painted metal and cane. Measuring 84.1 x 39.3 x 47.2 cm (33 1/8 x 15 1/2 x 18 5/8 in.).
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 9401: Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof GIR 6 has been used to classify the goods to subheading level 940179: Other seats, with metal frames; Other than upholstered Also classified in accordance with: Chapter Note 2(b) to Chapter 94 Harmonized System Explanatory Note (HSEN's) to heading 94.01 Harmonized System Explanatory Note (HSEN's) to heading 97.05 (A) (3)
- UK 9401790000 Valid Feb 17, 2026 to Feb 16, 2029 · Ruling 600014706 on GOV.UK
Garden furniture. A 4-piece sofa set, designed to provide comfortable and stylish outdoor or indoor seating for social gatherings, relaxation, and leisure. It combines durability, functionality, and modern aesthetics, making it ideal for patios, gardens, conservatories, or living spaces. The set consists of a blue/grey powder coated, aluminium framed 3-seater sofa and 2 blue/grey powder coated, aluminium framed single seat chairs. The frames have a textilene fabric secured inside the frames, so they can be used without the removable 8cm cushions. The fabric is not waterproof and has no coating. These seats are not considered to be upholstered. Dimension – 1880*750*1040mm. There is also a coffee table, with a 5mm tempered glass table, for placing drinks, snacks and / or decorative items on. This table is considered to be unsuitable for dining. Dimensions – 1330*650*450mm. The product is for retail sale. It is packaged together in carboard cartons for assembly in the home.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9401- seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 3 (b) has been used as the seats are considered to be the essential character. GIR 5 (b) has been used to identify the packaging – Cardboard boxes for transport. GIR 6 has been used to classify the goods to subheading level 9401 79 - other seats, with metal frames: other than upholstered. Also classified in accordance with:- Heading 94 Chapter Note 2 Harmonised System Explanatory Notes (HSEN) heading 9401.
- UK 9401800000 Valid May 2, 2025 to May 1, 2028 · Ruling 600012928 on GOV.UK
2-seater faux rattan-effect bistro set. Used for garden seating. The set is made from polyethylene and resin. Sturdy seatbacks and armrests are paired with cushions for comfort and durability, while the stylish graphite colour scheme is sure to complement your garden or patio. The table features a smooth, slatted table top and lift the lid of the table to reveal storage for cushions and garden equipment. The cushions are included. You need to remove the seat pads for a weather-resistant set that can be left outside all year round. Consider covering in extreme conditions. Garden table features: Resin table top. Storage included in: table - 50L total storage capacity. Table size: H43, W39, L39cm. Chair features: Chair seat and back made from rattan effect. Size H89, W62, D60cm. Seat height 41.6cm. 110kg maximum user weight per chair. Cushion features: Polyester and Light Grey cushions. Removable covers. Washable covers. Remove cushions when not in use and store inside. Packaged in bags/boxes.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR1 has been used to classify this product by the terms of heading 9401 seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof GIR 5 (b) - has been used to identify the type of packaging. GIR6 has been used to classify the goods to subheading level 940180 other seats Also Classified in Accordance with: Note 2 to Chapter 94 Harmonised system explanatory notes (HSENs) 9401 Harmonised system explanatory notes (HSENs) 9403
- UK 9401998000 Valid Jan 8, 2025 to Jan 7, 2028 · Ruling 600010995 on GOV.UK
Bean Bag Cover made of 100% woven Polyester Used for seating To be filled with Polystyrene foam beads Will be sent in a bag or box
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (Gir)s Gir 1 has been used to classify this product by the terms of heading 9401 Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof Gir 5 (b) has been used to identify the type of packaging. Gir 6 has been used to classify the goods to subheading level 940199 Other than parts of wood, of seats of a kind used for aircraft Eight digit code 94019980 other than, of seats of a kind used for motor vehicles Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 'Parts' of Heading 9401
- UK 9401998000 Valid Dec 12, 2025 to Dec 11, 2028 · Ruling 600013622 on GOV.UK
Permanent furniture coverings for chairs, sofas, sofa-beds and footstools. The coverings are of polyester fabric. Zips are included only to help with the upholstery filling process. The coverings cannot be removed from the chairs/sofa/sofa-bed/footstools without having to take apart the frames/remove legs. The large footstools can be used as a seat. The coverings are packaged into plastic bags and stored in wooden crates for transportation.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 5b - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 940199 - Parts: Other than of wood. 8-digit code 94019980 - Other than elsewhere specified within this subheading. Also classified in accordance with: Harmonized System Explanatory Notes (HSEN) to heading 9401.
- UK 9401998000 Valid Dec 12, 2025 to Dec 11, 2028 · Ruling 600013623 on GOV.UK
Permanent furniture coverings for chairs, sofas, sofa-beds, footstools. The coverings are of leather fabric. Zips are included only to help with the upholstery filling process. The coverings cannot be removed from the chairs/sofa/sofa-bed/footstools without having to take apart the frames/remove legs. The large footstools can be used as a seat. The furniture coverings are packaged into plastic bags and stored in wooden crates for transportation.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 5b - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 940199 - Parts: Other than of wood. 8-digit code 94019980 - Other than elsewhere specified within this subheading. Also classified in accordance with: Harmonized System Explanatory Notes (HSEN) to heading 9401.
- UK 9401998000 Valid Mar 27, 2026 to Mar 26, 2029 · Ruling 600015091 on GOV.UK
The base is semi‑permanently attached to the vehicle seat at three safety points using ISOFIX release buttons and a load leg. The actual child car seat for the infant or toddler (sold separately or together with the base as a bundle) is then secured onto the base. The base itself can only be used in combination with a compatible child car seat, which is detachable from the base using a click mechanism. The car seat bases have integrated rotation mechanism, which enables turning the seat towards the car door for easier securing a child onto the car seat and removing them from it. Height-adjustable load leg technology has been added for extra stability. The bases exterior is made predominately from sturdy plastic material, with the load leg, some mechanisms (eg. ISOFIX) and the base interior made from metal. Our base T comes also with integrated battery operating a mechanism indicating if the base has been secured in the vehicle in the correct position.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 9401 - Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof. GIR 5b - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 940199 - Parts: Other than of wood. 8-digit code 94019980 - Other than elsewhere specified within this subheading. Also classified in accordance with: Harmonized System Explanatory Notes (HSEN) to heading 9401.
Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.
Restrictions and flags for 9401000000
- Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 9401
Art. 3i, goods generating significant revenue for Russia
Read the act on EUR-Lex
For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.
Import VAT in the EU
- Austria 20 %
- Belgium 21 %
- Bulgaria 20 %
- Croatia 25 %
- Cyprus 19 %
- Czechia 21 % maybe 12 %
- Denmark 25 %
- Estonia 24 %
- Finland 25.5 %
- France 20 %
- Germany 19 %
- Greece 24 % maybe 13 %
- Hungary 27 %
- Ireland 23 %
- Italy 22 %
- Latvia 21 %
- Lithuania 21 %
- Luxembourg 17 %
- Malta 18 %
- Netherlands 21 %
- Poland 23 %
- Portugal 23 %
- Romania 21 %
- Slovakia 23 %
- Slovenia 22 % maybe 9.5 %
- Spain 21 %
- Sweden 25 %
Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.
Rules of origin
Preferential rules of origin for subheading 940100 depend on the trade agreement. The Commission publishes them in Access2Markets.
Rules of origin on Access2MarketsInformation
When importing or exporting "Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof", it is crucial to have the correct HS code or TARIC code. The HS code 9401000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof".
- Check if any additional licenses, permits, or certificates are required to import "Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof" is 9401000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 94 was selected for furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; luminaires and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like; prefabricated buildings
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 01 refers to Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof.
HS Code tree structure
9400000000 80
Chapter FURNITURE; BEDDING, MATTRESSES, MATTRESS SUPPORTS, CUSHIONS AND SIMILAR STUFFED FURNISHINGS; LUMINAIRES AND LIGHTING FITTINGS, NOT ELSEWHERE SPECIFIED OR INCLUDED; ILLUMINATED SIGNS, ILLUMINATED NAMEPLATES AND THE LIKE; PREFABRICATED BUILDINGS
9401000000 80
Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof
9401100000 80
- Seats of a kind used for aircraft
9401200000 80
- Seats of a kind used for motor vehicles
9401310000 10
- Swivel seats with variable height adjustment
9401310000 80
- - Of wood
9401390000 80
- - Other
9401410000 10
- Seats other than garden seats or camping equipment, convertible into beds
9401410000 80
- - Of wood
9401490000 80
- - Other
9401520000 10
- Seats of cane, osier, bamboo or similar materials
9401520000 80
- - Of bamboo
9401530000 80
- - Of rattan
9401590000 80
- - Other
9401610000 10
- Other seats, with wooden frames
9401610000 80
- - Upholstered
9401690000 80
- - Other
9401710000 10
- Other seats, with metal frames
9401710000 80
- - Upholstered
9401790000 80
- - Other
9401800000 80
- Other seats
9401910000 10
- Parts
9401910000 80
- - Of wood
9401911000 80
- - - Of seats of a kind used for aircraft
9401911010 80
- - - - Of seats specially designed for the crew, for use in certain types of aircraft
9401911090 80
- - - - Other
9401919000 80
- - - Other
9401990000 80
- - Other
9401991000 80
- - - Of seats of a kind used for aircraft
9401991010 80
- - - - Of seats specially designed for the crew, for use in certain types of aircraft
9401991090 80
- - - - Other
9401992000 80
- - - Of seats of a kind used for motor vehicles
9401992010 80
- - - - Ratchet disk for use in the manufacture of reclining car seats
9401992020 80
- - - - A high-mobility positioning cassette, -capable of operating within a temperature range of -40°C to 85°C, -enables controlled forward and backward movement of a vehicle seat, -integrated with the seat backrest via a steel cable system, preventing seat removal when the backrest is open and allowing it only when the backrest is closed, -constructed from glass fiber-reinforced, special alloy aluminum components and fitted with self-lubricating bushings made of polyoxymethylene (POM) and polytetrafluoroethylene (PFTE) to minimize friction, -equipped with a locking system designed to remain secure under forces up to 20G, -requires a minimum force of 40N for normal operation
9401992030 80
- - - - Latch seat system modules enabling seat sliding, latching and unlatching in random, independent positions along the rails: -with an integrated safety locking mechanism, -with a cassette architecture for integration with seat through screw connections, -with a housing made of a magnesium die-cast alloy, -with an anti-noise system, -interfacing with car rail systems, -without electronic control unit, -without semiconductors, -with a weight of 1475 g or more, but not more than 1619 g
9401992090 80
- - - - Other
9401998000 80
- - - Other