New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 9405000000 80 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included

Email me changes

Import trade restrictions for 9405000000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 68
BA
Bosnia and Herzegovina BA
01-01-2009
0 %
Tariff preference 142
MK
North Macedonia MK
01-01-2009
0 %
Tariff preference 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
UA
Ukraine UA
01-01-2016
0 %
Tariff preference 142
XS
Serbia XS
01-02-2010
0 %
Tariff preference 142
JP
Japan JP
01-02-2020
0 %
Tariff preference 142
PE
Peru PE
01-03-2013
0 %
Tariff preference 142
AL
Albania AL
01-04-2009
0 %
Tariff preference 142
XK
Kosovo XK
01-04-2016
0 %
Tariff preference 142
ME
Montenegro ME
01-05-2010
0 %
Tariff preference 142
NZ
New Zealand NZ
01-05-2024
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Airworthiness tariff suspension 119
1006
EU-Canada agreement: re-imported goods 1006
21-09-2017
0 %
Tariff preference 142
CA
Canada CA
21-09-2017
0 %
Tariff preference 142
IQ
Iraq IQ
Furniture, between 50 and 100 years old, other than those covered by the additional codes 4008, 4010, 4011, 4013, 4023, 4040 - 4048
23-05-2003
Restriction on entry into free circulation 465
SY
Syria SY
Furniture, between 50 and 100 years old, other than those covered by the additional codes 4008, 4010, 4011, 4013, 4023, 4040 - 4048
29-05-2025
Restriction on entry into free circulation 465
SY
Syria SY
Other than those mentioned in Regulation (EC) no 1332/2013 (OJ L 335): no restrictions
29-05-2025
Restriction on entry into free circulation 465
IQ
Iraq IQ
Other than those mentioned in Regulation (EC) no 1210/2003 (OJ L 169): no restrictions
23-05-2003
Restriction on entry into free circulation 465
FO
Faroe Islands FO
01-01-1997
0 %
Tariff preference 142
XL
Melilla XL
01-01-1999
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Tariff preference 142
TR
Türkiye TR
01-01-2006
0 %
Customs union duty 106
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
SM
San Marino SM
01-01-2006
0 %
Customs union duty 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Tariff preference 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
EC
Ecuador EC
01-01-2017
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Tariff preference 142
SG
Singapore SG
01-01-2027
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
XC
Ceuta XC
01-07-1991
0 %
Accession act0001/85
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
SY
Syria SY
01-08-1994
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
VN
Viet Nam VN
01-08-2020
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
GE
Georgia GE
01-09-2014
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
ZA
South Africa ZA
10-10-2016
0 %
Tariff preference 142
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
CH
Switzerland CH
20-12-1972
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Tariff preference 142
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 4
RU
Russian Federation RU
24-04-2026
– 23-04-2031
Document required
banned without it
Import control 762
BY
Belarus BY
25-02-2025
Document required
banned without it
Import control 760
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 9405000000

  • Customs value €1,000.00
  • No third-country duty is recorded for this origin.
  • Import VAT 19 % €190.00
  • Total €1,190.00

May be lower under conditions:

  • Airworthiness tariff suspension: 0 %

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 9405000000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Measures 2
1008
All third countries 1008
Furniture, between 50 and 100 years old, other than those covered by the additional codes 4008, 4010, 4011, 4013, 4023, 4040 - 4048
01-01-2007
Restriction on export 467
1008
All third countries 1008
Other than those mentioned in Regulation (EC) no 1210/2003 (OJ L 169): no restrictions
01-01-2007
Restriction on export 467
Controls and documents 2
1008
All third countries 1008
02-03-2009
Document required
banned without it
Export control on cultural goods 735
1008
All third countries 1008
15-12-2013
Document required
banned without it
Export authorization 473

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 9405000000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chile

    EU-Algeria Association Agreement · Algeria

    EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland

    EU-Egypt Association Agreement · Egypt

    EPA CARIFORUM

    EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

    EU-Georgia DCFTA · Georgia

    EU-Israel Association Agreement · Israel

    EU-Iceland FTA · Iceland

    EU-Jordan Association Agreement · Jordan

    EU-Korea FTA · South Korea

    EU-Lebanon Association Agreement · Lebanon

    EU-Morocco Association Agreement · Morocco

    EU-Moldova DCFTA · Moldova

    Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

    EU-Tunisia Association Agreement · Tunisia

    EU-Ukraine DCFTA · Ukraine

    Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan

    Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included; prefabricated buildings / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Prefabricated buildings / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Japan EPA · Japan

    CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Central America Association Agreement

    Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included / or: Manufacture from materials of any heading except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Mexico Global Agreement · Mexico

    Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included / or: Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product

  • EPA SADC · South Africa

    Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name–plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex–works price of the product

  • EU-Singapore FTA · Singapore

    Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EU-Viet Nam FTA · Vietnam

    Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings. / or: Manufacture from materials of any heading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 9405000000

9405 31 00 CN Explanatory Notes: and 9405 39 00

Lighting strings of a kind used for Christmas trees These subheadings cover lighting strings/light chains of a kind used for Christmas trees. The objective characteristics of these articles, such as the length of the chain, the type of lights, the distance between the lamps, the form of the ‘light-bulbs’ (standard or having a connection with the Christmas season), easy handling for putting them on the Christmas tree, indicate that they are intended to be used mainly/principally to decorate a Christmas tree by lighting. ‘Light-bulbs’ having a connection with Christmas may have the form of snowflakes, stars or icicles or other images of the winter season; a connection based on long-standing traditions is not required. Examples of products that are to be classified in subheadings 9405 31 00 and 9405 39 00 as ‘lighting strings of a kind used for Christmas trees’: A light net consisting of dark green electric cables incorporating 160 clear mini filament lamps (1,5 V/0,5 W), joined together so as to form a net of 320 × 150 cm. The size of the net enables it to be easily placed over a Christmas tree. The colour of the cables and the 19 × 19 cm individual meshes, that allow the net to be pulled inwards over the outer tips of the branches, ensure that, when the lamps are lit, the wires and lamps are concealed while the lights shine through to the outside, providing for a uniform decorative effect. | A 55 m long light chain consisting of an electric cable incorporating 240 mini filament lamps (2,5 V/0,25W). The distance between each lamp is 21 cm. The light chain is made for both outdoor and indoor use. These subheadings exclude lighting strings that are not designed to be mainly used for a Christmas tree and that are intended to be used for various decorative purposes throughout the year, for example, for decorating houses, balconies, wedding party locations, gardens or for decorating smaller items such as a wreath, a flowerpot or a table. Also, lighting strings with lamps designed as e.g. pumpkins or hearts do not fall under this subheading, because the lamps do not have any connection with Christmas. Examples of products that are to be classified in subheading 9405 4x as ‘Other electric luminaires and lighting fittings’: LED curtain lights in the form of a garland (existing in various lengths), made of two insulated electric cables, with strands of various lengths (30-70 cm long) hanging from it at intervals of approximately 15 cm. The strands are fitted with approximately 200 LED light sources in total. The garland comes with a connection cable and a transformer. | Micro LED light chain, of a total length of 240cm, consisting of a metal wire and 40 light sources with a spacing of 5 cm, battery powered. Micro LED light chain, of a total length of 860 cm (of which 500 cm is a connecting cable), consisting of a metal wire and 360 light sources with a spacing of 1cm. The light chain comes with a transformer.

9405 39 00 CN Explanatory Notes: and 9405 39 00

Lighting strings of a kind used for Christmas trees These subheadings cover lighting strings/light chains of a kind used for Christmas trees. The objective characteristics of these articles, such as the length of the chain, the type of lights, the distance between the lamps, the form of the ‘light-bulbs’ (standard or having a connection with the Christmas season), easy handling for putting them on the Christmas tree, indicate that they are intended to be used mainly/principally to decorate a Christmas tree by lighting. ‘Light-bulbs’ having a connection with Christmas may have the form of snowflakes, stars or icicles or other images of the winter season; a connection based on long-standing traditions is not required. Examples of products that are to be classified in subheadings 9405 31 00 and 9405 39 00 as ‘lighting strings of a kind used for Christmas trees’: A light net consisting of dark green electric cables incorporating 160 clear mini filament lamps (1,5 V/0,5 W), joined together so as to form a net of 320 × 150 cm. The size of the net enables it to be easily placed over a Christmas tree. The colour of the cables and the 19 × 19 cm individual meshes, that allow the net to be pulled inwards over the outer tips of the branches, ensure that, when the lamps are lit, the wires and lamps are concealed while the lights shine through to the outside, providing for a uniform decorative effect. | A 55 m long light chain consisting of an electric cable incorporating 240 mini filament lamps (2,5 V/0,25W). The distance between each lamp is 21 cm. The light chain is made for both outdoor and indoor use. These subheadings exclude lighting strings that are not designed to be mainly used for a Christmas tree and that are intended to be used for various decorative purposes throughout the year, for example, for decorating houses, balconies, wedding party locations, gardens or for decorating smaller items such as a wreath, a flowerpot or a table. Also, lighting strings with lamps designed as e.g. pumpkins or hearts do not fall under this subheading, because the lamps do not have any connection with Christmas. Examples of products that are to be classified in subheading 9405 4x as ‘Other electric luminaires and lighting fittings’: LED curtain lights in the form of a garland (existing in various lengths), made of two insulated electric cables, with strands of various lengths (30-70 cm long) hanging from it at intervals of approximately 15 cm. The strands are fitted with approximately 200 LED light sources in total. The garland comes with a connection cable and a transformer. | Micro LED light chain, of a total length of 240cm, consisting of a metal wire and 40 light sources with a spacing of 5 cm, battery powered. Micro LED light chain, of a total length of 860 cm (of which 500 cm is a connecting cable), consisting of a metal wire and 360 light sources with a spacing of 1cm. The light chain comes with a transformer.

9405 40 10 CN Explanatory Notes: Searchlights and spotlights

See the HS Explanatory Note to heading 9405, (I), third and fourth paragraphs.

9405 50 00 CN Explanatory Notes: Non-electrical lamps and lighting fittings

See also the HS Explanatory Note to heading 9405, parts (I)(5) and (I)(6). This subheading includes lanterns of any material (excluding those materials referred to in Note 1 to Chapter 71) whether or not they have a fixture or specific fitting for holding a candle or a tea light. They usually have holes for ventilation at the top and an ‘opening’ through which a candle can be placed. This subheading also includes candelabra (see figure 1 and 2), candlesticks (see figure 3 and 4) and candle brackets (see figure 5), including candelabra, candlesticks and candle brackets for tea lights or for both (candles and tea lights). Other receptacles of various shapes, made of various materials (glass, ceramics, wood, plastic etc.), such as so-called ‘tea light holders’ or other receptacles for holding candles of all kinds (dinner candles/stick candles, pillar candles, etc.), or for holding both (a candle or a tea light) are covered by this subheading only if they include a fixture or specific fitting to hold a candle and/or tea light in a fixed position (for example, a spike on which the candle is to be placed, or a special clamp to prevent the candle from shifting or falling). However, similar receptacles without any such a fixture or specific fitting to hold a candle, a tea light or both in a fixed position, are excluded from this subheading and are to be classified according to their constituent material (see figures 6 to 16). The fact that a candle or a tea light may be placed tightly in a recess of the receptacle is not sufficient for classification in this subheading (see also Commission Regulation (EC) No 141/2002 (3) and Commission Implementing Regulation (EU) No 774/2011 (4)). Examples of products of subheading 9405 50 00: Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Examples of products which are to be classified according to their constituent material: Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16

Notes to chapter 94

Notes 1. This chapter does not cover: (a) pneumatic or water mattresses, pillows or cushions, of Chapter 39, 40 or 63; (b) mirrors designed for placing on the floor or ground (for example, cheval-glasses (swing-mirrors)) of heading 7009; (c) articles of Chapter 71; (d) parts of general use as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39), or safes of heading 8303; (e) furniture specially designed as parts of refrigerating or freezing equipment of heading 8418; furniture specially designed for sewing machines (heading 8452); (f) lamps or light sources and parts thereof of Chapter 85; (g) furniture specially designed as parts of apparatus of heading 8518 (heading 8518), of heading 8519 or 8521 (heading 8522) or of headings 8525 to 8528 (heading 8529); (h) articles of heading 8714; (ij) dentists' chairs incorporating dental appliances of heading 9018 or dentists' spittoons (heading 9018); (k) articles of Chapter 91 (for example, clocks and clock cases); (l) toy furniture or toy luminaires and lighting fittings (heading 9503), billiard tables or other furniture specially constructed for games (heading 9504), furniture for conjuring tricks or decorations (other than lighting strings) such as Chinese lanterns (heading 9505); or (m) monopods, bipods, tripods and similar articles (heading 9620). 2. The articles (other than parts) referred to in headings 9401 to 9403 are to be classified in those headings only if they are designed for placing on the floor or ground. The following are, however, to be classified in the headings mentioned above, even if they are designed to be hung, to be fixed to the wall or to stand one on the other: (a) cupboards, bookcases, other shelved furniture (including single shelves presented with supports for fixing them to the wall) and unit furniture; (b) seats and beds. 3. (A) In headings 9401 to 9403 references to parts of goods do not include references to sheets or slabs (whether or not cut to shape but not combined with other parts) of glass (including mirrors), marble or other stone or of any other material referred to in Chapter 68 or 69. (B) Goods described in heading 9404, presented separately, are not to be classified in heading 9401, 9402 or 9403 as parts of goods. 4. For the purposes of heading 9406, the expression ‘prefabricated buildings’ means buildings which are finished in the factory or put up as elements, presented together, to be assembled on site, such as housing or worksite accommodation, offices, schools, shops, sheds, garages or similar buildings. Prefabricated buildings include ‘modular building units’ of steel, normally presented in the size and shape of a standard shipping container, but substantially or completely pre-fitted internally. Such modular building units are normally designed to be assembled together to form permanent buildings. Additional Note 1. For the purposes of heading 9404, the expression “stuffed or internally fitted with any material” covers material of any thickness.

Notes to section XX

MISCELLANEOUS MANUFACTURED ARTICLES

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

EU classification regulations for 9405000000

Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.

  • 9405 31 00 Feb 23, 2010 · Regulation on EUR-Lex
    An article consisting of dark green electric cables incorporating 160 clear mini filament lamps (1,5 V/0,5 W), joined together so as to form a net of 320 × 150 cm (so called ‘light net’). The individual meshes of the net are 19 × 19 cm so that the distance between each lamp is approximately 19 cm.

    The article is presented in a package for retail sale together with a 24 V static converter, 8 suction pads with hooks and 10 spare lamps. The light net is made for both outdoor and indoor use. The article is intended for decorating, for example, a Christmas tree or a window.

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9405 and 9405 30 00 . The size of the net enables it to be easily placed over and cover a Christmas tree. The colour of the cables and the 19 × 19 cm individual meshes, that allow the net to be pulled inwards over the outer tips of the branches, ensure that, when the lamps are lit, the wires and lamps are concealed while the lights shine through to the outside, providing for a uniform decorative effect. Although the article may be used for other purposes, its objective and identifiable characteristics indicate that it is intended to be used to decorate by lighting a Christmas tree. The article is therefore to be classified under CN code 9405 30 00 as a lighting set of a kind used for Christmas trees.

    Classified under 9405 30 00 at the time

  • 9405 39 00 Feb 23, 2010 · Regulation on EUR-Lex
    An article consisting of dark green electric cables incorporating 160 clear mini filament lamps (1,5 V/0,5 W), joined together so as to form a net of 320 × 150 cm (so called ‘light net’). The individual meshes of the net are 19 × 19 cm so that the distance between each lamp is approximately 19 cm.

    The article is presented in a package for retail sale together with a 24 V static converter, 8 suction pads with hooks and 10 spare lamps. The light net is made for both outdoor and indoor use. The article is intended for decorating, for example, a Christmas tree or a window.

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9405 and 9405 30 00 . The size of the net enables it to be easily placed over and cover a Christmas tree. The colour of the cables and the 19 × 19 cm individual meshes, that allow the net to be pulled inwards over the outer tips of the branches, ensure that, when the lamps are lit, the wires and lamps are concealed while the lights shine through to the outside, providing for a uniform decorative effect. Although the article may be used for other purposes, its objective and identifiable characteristics indicate that it is intended to be used to decorate by lighting a Christmas tree. The article is therefore to be classified under CN code 9405 30 00 as a lighting set of a kind used for Christmas trees.

    Classified under 9405 30 00 at the time

  • 9405 41 31 Apr 29, 2014 · Regulation on EUR-Lex
    An apparatus (so-called ‘TV simulator’) in a plastic housing with a transparent cover on the front and with dimensions of approximately 8 × 7 × 6 cm.

    The apparatus is equipped with four LEDs for generating light, a quartz crystal, a dusk sensor, a timer, an operating mode display and control buttons. It is presented with a power supply. The apparatus simulates a television set that is switched on, by generating random flickering light of varying intensity and colour during a pre-programmed period of time. It gives the impression that there are people present in the house with the purpose of deterring burglars.

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9405 , 9405 40 and 9405 40 39 . The function of the apparatus is to generate random flickering light solely with the purpose of simulating a television set that is switched on. As the random flickering light does not serve any signalling purpose, classification under heading 8531 as visual signalling apparatus is excluded (see also the Harmonised System Explanatory Notes to heading 8531 , first paragraph). As the article has all the objective characteristics of a lighting fitting of heading 9405 , it is to be classified under CN code 9405 40 39 as other electric lamps and lighting fittings of plastics.

    Classified under 9405 40 39 at the time

+ 9 more
  • 9405 41 39 Aug 11, 2017 · Regulation on EUR-Lex
    A product (so-called ‘LED dental light’) made of different materials such as glass, plastic and various metals and including several light-emitting diodes (LED). It is presented attached to a pivoting arm. The pivoting arm can either be mounted on a dental chair or e.g. on the wall or ceiling of a dental surgery.

    It is designed to illuminate the oral cavity during dentistry treatment. The level, colour and pattern of the light produced is specifically for use by dentists. See image (*1)

    Reasons

    Classification is determined by general rules 1, 3 (c) and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9405 , 9405 40 and 9405 40 99 . Classification under heading 9018 as a medical instrument or appliance is excluded as the heading excludes certain items of complete dental equipment (such as shadowless lamps) when they are presented separately; those items are to be classified in their own respective headings (see also Harmonised System Explanatory Notes (HSEN) to heading 9018 , part (II), (ii) and exclusion under part (II)). The product has the characteristics and design of an electric lamp/lighting fitting of heading 9405 which covers electric specialised lamps and lighting fittings that can be constituted of any materials and use any source of light (see also the HSEN to heading 9405 , part (I). The product, which consists of different materials, none of them giving it its essential character, is therefore to be classified under CN code 9405 40 99 as other electric lamps and lighting fittings of other materials than plastics.

    Classified under 9405 40 99 at the time

  • 9405 41 39 Mar 28, 2014 · Regulation on EUR-Lex
    An electric lighting article (so-called ‘LED floodlight’) in a rectangular shaped aluminium housing with a glass cover, with dimensions of approximately 23 × 19 × 13 cm.

    The article comprises an aluminium reflector and has a mounting bracket on the back for adjusting the light angle. It is fitted with a high-power LED chip and a power supply with a transformer. It has a power consumption of 95 W, a luminous efficacy of 100 lm/W and a beam angle of 120°. The article is used outdoors for illuminating, for example, landscapes, buildings, construction areas, billboards, lawns or gardens. (*1) See image

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9405 , 9405 40 and 9405 40 99 . Given its objective characteristics, such as the wide beam angle, the article is intended to be used for illuminating large areas. Consequently, classification under subheading 9405 40 10 as spotlights is excluded (see also the Harmonised System Explanatory Notes to heading 9405 , group (I), third paragraph). The article is therefore to be classified under CN code 9405 40 99 as other electric lamps and lighting fittings.

    Classified under 9405 40 99 at the time

  • 9405 42 31 Apr 29, 2014 · Regulation on EUR-Lex
    An apparatus (so-called ‘TV simulator’) in a plastic housing with a transparent cover on the front and with dimensions of approximately 8 × 7 × 6 cm.

    The apparatus is equipped with four LEDs for generating light, a quartz crystal, a dusk sensor, a timer, an operating mode display and control buttons. It is presented with a power supply. The apparatus simulates a television set that is switched on, by generating random flickering light of varying intensity and colour during a pre-programmed period of time. It gives the impression that there are people present in the house with the purpose of deterring burglars.

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9405 , 9405 40 and 9405 40 39 . The function of the apparatus is to generate random flickering light solely with the purpose of simulating a television set that is switched on. As the random flickering light does not serve any signalling purpose, classification under heading 8531 as visual signalling apparatus is excluded (see also the Harmonised System Explanatory Notes to heading 8531 , first paragraph). As the article has all the objective characteristics of a lighting fitting of heading 9405 , it is to be classified under CN code 9405 40 39 as other electric lamps and lighting fittings of plastics.

    Classified under 9405 40 39 at the time

  • 9405 42 39 Aug 11, 2017 · Regulation on EUR-Lex
    A product (so-called ‘LED dental light’) made of different materials such as glass, plastic and various metals and including several light-emitting diodes (LED). It is presented attached to a pivoting arm. The pivoting arm can either be mounted on a dental chair or e.g. on the wall or ceiling of a dental surgery.

    It is designed to illuminate the oral cavity during dentistry treatment. The level, colour and pattern of the light produced is specifically for use by dentists. See image (*1)

    Reasons

    Classification is determined by general rules 1, 3 (c) and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9405 , 9405 40 and 9405 40 99 . Classification under heading 9018 as a medical instrument or appliance is excluded as the heading excludes certain items of complete dental equipment (such as shadowless lamps) when they are presented separately; those items are to be classified in their own respective headings (see also Harmonised System Explanatory Notes (HSEN) to heading 9018 , part (II), (ii) and exclusion under part (II)). The product has the characteristics and design of an electric lamp/lighting fitting of heading 9405 which covers electric specialised lamps and lighting fittings that can be constituted of any materials and use any source of light (see also the HSEN to heading 9405 , part (I). The product, which consists of different materials, none of them giving it its essential character, is therefore to be classified under CN code 9405 40 99 as other electric lamps and lighting fittings of other materials than plastics.

    Classified under 9405 40 99 at the time

  • 9405 42 39 Mar 28, 2014 · Regulation on EUR-Lex
    An electric lighting article (so-called ‘LED floodlight’) in a rectangular shaped aluminium housing with a glass cover, with dimensions of approximately 23 × 19 × 13 cm.

    The article comprises an aluminium reflector and has a mounting bracket on the back for adjusting the light angle. It is fitted with a high-power LED chip and a power supply with a transformer. It has a power consumption of 95 W, a luminous efficacy of 100 lm/W and a beam angle of 120°. The article is used outdoors for illuminating, for example, landscapes, buildings, construction areas, billboards, lawns or gardens. (*1) See image

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9405 , 9405 40 and 9405 40 99 . Given its objective characteristics, such as the wide beam angle, the article is intended to be used for illuminating large areas. Consequently, classification under subheading 9405 40 10 as spotlights is excluded (see also the Harmonised System Explanatory Notes to heading 9405 , group (I), third paragraph). The article is therefore to be classified under CN code 9405 40 99 as other electric lamps and lighting fittings.

    Classified under 9405 40 99 at the time

  • 9405 49 40 Apr 29, 2014 · Regulation on EUR-Lex
    An apparatus (so-called ‘TV simulator’) in a plastic housing with a transparent cover on the front and with dimensions of approximately 8 × 7 × 6 cm.

    The apparatus is equipped with four LEDs for generating light, a quartz crystal, a dusk sensor, a timer, an operating mode display and control buttons. It is presented with a power supply. The apparatus simulates a television set that is switched on, by generating random flickering light of varying intensity and colour during a pre-programmed period of time. It gives the impression that there are people present in the house with the purpose of deterring burglars.

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9405 , 9405 40 and 9405 40 39 . The function of the apparatus is to generate random flickering light solely with the purpose of simulating a television set that is switched on. As the random flickering light does not serve any signalling purpose, classification under heading 8531 as visual signalling apparatus is excluded (see also the Harmonised System Explanatory Notes to heading 8531 , first paragraph). As the article has all the objective characteristics of a lighting fitting of heading 9405 , it is to be classified under CN code 9405 40 39 as other electric lamps and lighting fittings of plastics.

    Classified under 9405 40 39 at the time

  • 9405 49 90 Aug 11, 2017 · Regulation on EUR-Lex
    A product (so-called ‘LED dental light’) made of different materials such as glass, plastic and various metals and including several light-emitting diodes (LED). It is presented attached to a pivoting arm. The pivoting arm can either be mounted on a dental chair or e.g. on the wall or ceiling of a dental surgery.

    It is designed to illuminate the oral cavity during dentistry treatment. The level, colour and pattern of the light produced is specifically for use by dentists. See image (*1)

    Reasons

    Classification is determined by general rules 1, 3 (c) and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9405 , 9405 40 and 9405 40 99 . Classification under heading 9018 as a medical instrument or appliance is excluded as the heading excludes certain items of complete dental equipment (such as shadowless lamps) when they are presented separately; those items are to be classified in their own respective headings (see also Harmonised System Explanatory Notes (HSEN) to heading 9018 , part (II), (ii) and exclusion under part (II)). The product has the characteristics and design of an electric lamp/lighting fitting of heading 9405 which covers electric specialised lamps and lighting fittings that can be constituted of any materials and use any source of light (see also the HSEN to heading 9405 , part (I). The product, which consists of different materials, none of them giving it its essential character, is therefore to be classified under CN code 9405 40 99 as other electric lamps and lighting fittings of other materials than plastics.

    Classified under 9405 40 99 at the time

  • 9405 49 90 Mar 28, 2014 · Regulation on EUR-Lex
    An electric lighting article (so-called ‘LED floodlight’) in a rectangular shaped aluminium housing with a glass cover, with dimensions of approximately 23 × 19 × 13 cm.

    The article comprises an aluminium reflector and has a mounting bracket on the back for adjusting the light angle. It is fitted with a high-power LED chip and a power supply with a transformer. It has a power consumption of 95 W, a luminous efficacy of 100 lm/W and a beam angle of 120°. The article is used outdoors for illuminating, for example, landscapes, buildings, construction areas, billboards, lawns or gardens. (*1) See image

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 9405 , 9405 40 and 9405 40 99 . Given its objective characteristics, such as the wide beam angle, the article is intended to be used for illuminating large areas. Consequently, classification under subheading 9405 40 10 as spotlights is excluded (see also the Harmonised System Explanatory Notes to heading 9405 , group (I), third paragraph). The article is therefore to be classified under CN code 9405 40 99 as other electric lamps and lighting fittings.

    Classified under 9405 40 99 at the time

  • 9405 50 00 Jul 10, 2014 · Regulation on EUR-Lex
    A cylindrical container made of plastics, approximately 8 cm high, with a diameter of 6 cm, containing 180 ml of paraffin-based lamp oil (a mixture of paraffin containing 68 % of tetradecane, 25 % of pentadecane and approximately 4 % of hexadecane) and a wick. It is covered by a metal seal with a plastic cap that prevents evaporation of the oil and holds the wick in place (so-called ‘oil lamp’).

    The container cannot be refilled after the oil has been consumed. The product is used as a mood light. It can either be placed in a holder (for example, a glass pot) or it can be used independently. (*1) See image.

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature (GIR) and by the wording of CN codes 9405 and 9405 50 00 . Classification as oil under heading 2710 is excluded as the product has a metal seal with a plastic cap and a wick and thus consists of more elements than oil and a container normally used for packing such goods as provided for under GIR 5(b). The product has the characteristics and design of an independent lighting fitting of heading 9405 as it has a self-sustaining body containing oil, a metal seal with a plastic cap and a wick. That heading covers electrical and non-electrical lamps and lighting fittings that can be constituted of any materials and use any source of light (see also the Harmonised System Explanatory Notes to heading 9405 , part (I)). The product is therefore to be classified under CN code 9405 50 00 as non-electrical lamps and lighting fittings.

UK advance tariff rulings for 9405000000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 9405214000 Valid Dec 21, 2023 to Dec 20, 2026 · Ruling 600008277 on GOV.UK

    A small plastic projector unit, which utilises multi-coloured LEDs in seven different light modes via a perforated disc to display moving aurora lights onto the wall or ceiling of a darkened room. Battery powered featuring an auto shut off facility. Packaged for retail in a printed cardboard gift box.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect - a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5(b) Has been used to identify the type of packaging: a printed cardboard gift box. GIR 6 Has been used to classify this product by the terms of heading 940521 – Electric table, desk, bedside or floor-standing luminaires; designed for use solely with light-emitting …

  • UK 9405214000 Valid Apr 1, 2025 to Mar 31, 2028 · Ruling 600012702 on GOV.UK

    Enchanting light projector uses multi-coloured LED’s to display rainbow colours on walls and ceilings in a darkened room It is perfect for parties and sleepovers and a charming night light to inspire sweet dreams Including auto-shut off to preserve battery life Also includes a sunlight rainbow crystal to affix on a sunny window and watch natural rainbows dance around the room Secret code unlocks multilingual online facts and activities. Rainbow As existing design, all parts ABS Top of arch White Top of base White Under arch Blue pantone 286C LED housing Blue pantone 286C Under base Blue pantone 286C On-off switch Blue pantone 286C, engraved with power symbol, click on-off Mode switch Black, marked 1 at front and 2 at back Sticker Vinyl rainbow sticker 65 x 15mm, Required 4AAA Batteries (Not Included)

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 9405; lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 Has been used to classify the goods to subheading level 940521 electric table, desk, bedside or floor-standing lamps; designed for use solely with light-emitting diode (LED) light sources 8 Digit Code 94052140 of plastics or of ceramic materials Also classified in …

  • UK 9405214000 Valid Apr 1, 2025 to Mar 31, 2028 · Ruling 600012714 on GOV.UK

    Experience a beautiful cloud in your own room. Enchanting cloud night light appears to float on the clear stand. Colour-change light show with rain and thunder sounds. Mode 1: relax to the sound of gentle rain with a calming, colour-change LED lights. Perfect for dropping off to sleep. Mode 2: colour-change lights only, to add atmosphere to any room. Mode 3: bring the force of nature into your room with thrilling thunder sounds and cool lightning effects. Hear the storm, whilst you stay warm and cosy in bed! Great for both adults and children. A wonderful way to relax at bedtime. With auto shut-off. Secret code unlocks multilingual online cloud information. The product has an Auto shutoff. Battery Operated - 3 AA Batteries (Not Included) Packaged in a closed retail box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 9405; lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5(b) Has been used to identify the type of packaging. GIR 6 Has been used to classify the goods to subheading level 940521 electric table, desk, bedside or floor-standing lamps; designed for use solely with light-emitting diode (LED) light sources 8 Digit Code 94052140 of …

+ 59 more
  • UK 9405214000 Valid Jun 23, 2025 to Jun 22, 2028 · Ruling 600013244 on GOV.UK

    The product is a clock with alarm and light. The product has an LED clock display and can be programmed for wake-up function that simulates dawn and sunset to wake up to. Can be gradually increased or decreased, set by the user. The LED light can be a warm white, orange, and red and is fully adjustable, bright for reading or a soft glow. There is also an option for a beep alarm instead of the light alarm. The user interacts with the product via an LED display and five buttons. To power the product, it has a universal wall socket/DC power supply. It is manufactured from injection-moulded plastic parts. It measures 19 cm x 16cm x 12cm and weighs 0.565 kg (1.25 pounds). The bulbs are non-replaceable.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 3b - has been used as the bedside LED light is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 940521 - Electric table, desk, bedside or floor-standing luminaires; Designed for use solely with light-emitting diode …

  • UK 9405214000 Valid Jun 23, 2025 to Jun 22, 2028 · Ruling 600013245 on GOV.UK

    The product is an alarm with LED clock display screen, programable wake up function that simulates dawn and sunset to wake up to. The LED light comes on and gradually increases or decreases at the pre-set time, set by the user. The integrated LED bulb can be in warm white, orange, and red and is fully adjustable, bright for reading or a soft glow. Options to set as beep alarm or have the light up alarm. To power the product, it has a universal wall socket AC/DC power supply. It is manufactured from injection-moulded plastic parts. It measures 19 cm x 16cm x 12cm and weighs 0.565 kg (1.25 pounds). The bulbs are non-replaceable.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 3b - has been used as the bedside LED light is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 940521 - Electric table, desk, bedside or floor-standing luminaires; Designed for use solely with light-emitting diode …

  • UK 9405214000 Valid Jun 27, 2025 to Jun 26, 2028 · Ruling 600013252 on GOV.UK

    The product is an LED bedside lamp. It has six buttons on the front just under the LED interface and five buttons on the back of the lamp. The lamp has an alarm function and a variety of different sounds to set. The integrated LED bulb can be in warm white, orange, and red and is fully adjustable, bright for reading or a soft glow. There is also an option for a beep alarm instead of the light alarm. The lamp is powered by mains electricity through wall sockets, but it can also use batteries with limited functionality. The lamp is manufactured from injection-moulded plastic. Measuring 17.5cm height by 16.5cm width and 9cm depth. Packaged in a plastic bag within a corrugated cardboard carton and then into a product box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 3 (b) - has been used as the bedside LED light is considered to be the essential character. GIR 5 (b) – Has been used to identify the type of packaging – Plastic bag and cardboard box. GIR 6 - has been used to classify the goods to subheading level 9405 21 - Electric table, …

  • UK 9405214000 Valid Jun 30, 2025 to Jun 29, 2028 · Ruling 600013253 on GOV.UK

    The product is a bedside lamp with alarm and light intensity. The product has an LED clock display and can be programmed for wake-up function that simulates dawn and sunset for a gentle sleep or wake-up, at a user-defined time. The light will come on gradually at a specified time before the actual alarm goes off. At the wake-up time, the alarm may be programmed to wake the user up either with light only, beep, or natural, stimulating, or soothing sounds. This product is manufactured from injection-moulded plastic parts, which house the control electronics and the user interface components. The user interacts with the product via an LED display and five buttons. Measurements are Height 160mm by Depth 120mm.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 3b - has been used as the bedside LED light is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 940521 - Electric table, desk, bedside or floor-standing luminaires; Designed for use solely with light-emitting diode …

  • UK 9405214000 Valid Jul 21, 2025 to Jul 20, 2028 · Ruling 600013256 on GOV.UK

    The product is an LED light bedside light made to resemble a bedbug that is aimed at children to aid a sleep routine. There is a bright green band on the front interface which surrounds a face of eyes and mouth. There are green antennae present on the green band which also contains the company logo at the top. The product has four major features, adjustable brightness, On/Off button, Sunset feature and Nightlight sunset. The nightlight sunset setting automatically dims the light over a period of 15 minutes either to off or to a pre-set nightlight level. It is powered with an external AC/DC power supply which is detachable from the main product. The product is constructed using standard ABS, polycarbonate, and silicone materials. Dimensions: Width: 16cm, Depth: 10cm, Height: 10cm & Weight: 0.4kg

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 3b - has been used as the LED light is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 9405 21 - Electric table, desk, bedside or floor-standing luminaires; Designed for use solely with light-emitting diode (LED) …

  • UK 9405214000 Valid May 15, 2026 to May 14, 2029 · Ruling 600015410 on GOV.UK

    Children’s Animated Film Character Bedside Light The product is a children’s animated film character bed-side light, with characters applied on the lamp stand. The settings have a sunset functionality to help kids to drift off to sleep and a nightlight feature. The sunset setting automatically dims the light over a period of 20 minutes either to off or to a pre-set nightlight level. It consists of themed graphics and a diffuser that houses the LED lights. The product interface consists of a brightness dial on the front of the product to control the brightness of the light, a push button at the rear to activate sunset mode and a toggle switch at the bottom to set the desired nightlight level. It is powered with an external AC/DC power supply with a USB-C style connector which is detachable from the main product. The product is constructed using standard PC-ABS, Polycarbonate, Silicone, and steel. All plastic parts are injection moulded and the main graphics on the outer housing is applied using IMD technique. Dimensions: Width: 17cm, Depth: 17cm, Height: 20cm & Weight: 550g (including power adapter). All inner and outer packaging materials are corrugated cardboard.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5b - has been used to identify the type of packaging as in a retail box. GIR 6 - has been used to classify the goods to subheading level 9405 21 - Electric table, desk, bedside or floor-standing luminaires; Designed for use solely with light-emitting diode (LED) …

  • UK 9405214000 Valid Jul 10, 2026 to Jul 9, 2029 · Ruling 600015552 on GOV.UK

    A silicone light. Made from silicone (plastic) the light is in the form of a cartoon character and is round in shape with eyes and pointed ears. The lilac coloured character is used as a bedside or desk light and has a squishy feel. The LED light is activated via a slide switch button on the base, and three different brightness levels can be achieved when the character is squeezed or tapped on the head. The light also has 1-3 hour night Light mode. The item comes with an integrated non‑replaceable 3.7V lithium‑ion rechargeable battery and charging is achieved via a 5V USB connection. Packaged in a retail cardboard box with a large clear plastic window on the front, allowing the product to be seen. Age marking “3+” displayed on the front.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect:– a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRS): GIR 1 - Has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 3b - Has been used as the night light function is considered to be the essential character. GIR 5b - Has been used to identify the type of packaging - Retail cardboard box with a large clear plastic window on the front. GIR 6 - Has been used to classify the goods to …

  • UK 9405214000 Valid Jun 9, 2026 to Jun 8, 2029 · Ruling 600015839 on GOV.UK

    A colour changing LED light in a shape of a dog. It is a sensor light and has 6 colour changing modes. It can also be used as a night light as it has an ambience light. The light requires 3 x AAA batteries. The product is made from a combination of ABS (Acrylonitrile Butadiene Styrene, which is a tough, impact-resistant thermoplastic widely used in manufacturing) and silicon.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 9405; lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 Has been used to classify the goods to subheading level 940521 electric table, desk, bedside or floor-standing lamps; designed for use solely with light-emitting diode (LED) light sources 8 Digit Code 94052140 of plastics or of ceramic materials Also classified in …

  • UK 9405214000 Valid Jul 9, 2026 to Jul 8, 2029 · Ruling 600016077 on GOV.UK

    A light up night light in the shape of an astronaut. It is designed to hung on a wall or door or stood on a bedside table. The light inside is an LED bulb and it is powered by batteries (not included). The Astronaut is made of moulded plastic in a machine. Operated by an on off switch and has a 60 min auto shutoff. Packaged in a retail box for children age 3 and up. Height of product - 150mm

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (reg 3 (1)(a)); and b. Notes to a section of chapter of the Goods Classification Table (reg 3(1)(b)). General Interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 9405 Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 3B - has been used as the night light is considered to be the essential character. GIR 5b - has been used to identify the type of packaging as in a retail box. GIR 6 - has been used to classify the goods to subheading level 940521 Electric table, desk, bedside or floor …

  • UK 9405219090 Valid Jan 15, 2024 to Jan 14, 2027 · Ruling 600009352 on GOV.UK

    The product is an ornamental light shaped to represent a small tree, with branches containing small Led lights. The product is made from Steel:65%PVC15%. And can be used both indoor & outdoor. It is plugged into the main power outlet, the size of the tree is 60 x 60 x 180cm, packaged in a brown box, plastic free.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9405: Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5b has been used to identify the type of packaging: Brown Box GIR 6 - Has been used to classify the goods to subheading level 940521: Electric table, desk, bedside or floor-standing luminaires; Designed for use solely with light-emitting diode (LED) light sources. …

  • UK 9405219090 Valid Oct 1, 2024 to Sep 30, 2027 · Ruling 600011491 on GOV.UK

    An LED Potable Lamp made from Aluminium. It has a grip made of silicone, an aluminium body, and is mains-powered with battery back, and a thermoplastic diffuser. The lamp can be controlled with a smartphone or laptop and you can create your own personal wireless lighting system with lighting effects with up to 50 types of light colours. This kit contains Philips Hue Wireless Bridge (needed to control the lighting system), 2 x Philips Hue White E27 9.5W Bulbs. The Bridge connects to your router for you to enable to control the light system though an app. This lamp has a battery and is portable. It has 20,000 hours life. Power voltage is 240v with power consumption of 6w.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 - has been used to classify the goods to subheading level 940521 - Designed for use solely with light-emitting diode (led) light sources 8 Digit Code 94052190 - Of other materials 10 Digit Code 9405219090 - Other Also classified in accordance with : Harmonised System Explanatory Notes (HSENs) to heading …

  • UK 9405219090 Valid Jan 20, 2025 to Jan 19, 2028 · Ruling 600012165 on GOV.UK

    This product is an LED lamp made from aluminium. It has a grip made of silicone and an aluminium body, and is mains powered with a battery pack, and a thermoplastic diffuser. The lamp has a battery and if portable, with 20,000 hours of life and the power voltage is 240v with a power consumption of 6w. The bridge of the lamp connects to the users router to enable them to control the light system through an app. The lamp can be controlled with a smartphone or laptop and has up to 50 types of light colours. The kit contains a wireless bridge, used to control the lighting system and 2 White E27 9.5W bulbs.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 has been used to classify the goods to subheading level 940521 - Designed for use solely with light-emitting diode (led) light sources Eight Digit Code 94052190 - Of other materials Ten Digit Code 9405219090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) Note (I) 1 …

  • UK 9405294000 Valid Mar 15, 2024 to Mar 14, 2027 · Ruling 600009810 on GOV.UK

    The product is a table lamp circa 1950 The base is made from earthenware Comprising a lamp base, a standard bulb holder and a wicker-work plaited lampshade. The base is entirely black except for the bottom of the base where the artist’s signature is handwritten on it. It has a cone-shaped lower part with a wider cut away barrel shaped middle part with 2 horn shaped ‘arms’ on either side, the top is a narrow ‘neck’ part that widens slightly to accommodate the lampshade mounting bracket and bulb-holder. The lampshade is detachable and is of a plaited wickerwork appearance. It is cone shaped with the widest part at the bottom narrowing almost to a point at its top. It functions by drawing power from an electricity supply to a fitted lightbulb (not present and not subject to this classification) which will then illuminate a room or surrounding area. This item is a product of a person who was born and lived in France and designed and created a number of items of household furniture including tables, table lamps, bottles and various other ornaments.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9405 - Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 has been used to classify the goods to sub-heading 9405.29 - Electric table, desk, bedside or floor-standing luminaires; other than designed for use solely with light-emitting diode (led) light sources Code to 8 digits 9405.40 – Of plastics or of ceramic materials Also …

  • UK 9405294000 Valid Jan 8, 2026 to Jan 7, 2029 · Ruling 600013825 on GOV.UK

    A table lamp which was made by acclaimed French artists Jacques and Dani Ruelland in 1960. It is made from glazed earthenware and fabric shade. The table lamp measures 55cm high.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9405 -Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 has been used to classify the goods to sub-heading 940529 - Electric table, desk, bedside or floor-standing luminaires; other than designed for use solely with light-emitting diode (led) light sources 8 digit code 940540 – Of plastics or of ceramic materials Also classified …

  • UK 9405295000 Valid Apr 28, 2025 to Apr 27, 2028 · Ruling 600012746 on GOV.UK

    An electric Wax Melt Burners that contain a lightbulb. This product provide light to a darkened room and also melt fragranced wax to odourise the room. This product is made of glass that can be placed on a table , bedside table , or a similar surface and turn the light on. This illuminates the room whilst the heat from the bulb melts the wax. Is available in a variety of different colours/designs. Packed in a white picture box

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 3b has been used as the lighting function is considered to be the essential character. GIR 5b has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 940529 - Electric table, desk, bedside or floor-standing …

  • UK 9405299090 Valid Apr 28, 2025 to Apr 27, 2028 · Ruling 600012745 on GOV.UK

    An electric wax melt burner, that contains a light bulb, which provides light to a darkened room and also melts fragranced wax to odourise a room. The product is made of metal and metal mesh that can be placed on a table , bedside table , or similar surface and turn the light on. This illuminates the room whilst the heat from the bulb melts the wax. Is available in a variety of different colours/designs. Packed in a white picture box

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 3b has been used as the lighting function is considered to be the essential character. GIR 5b has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 940529 - Electric table, desk, bedside or floor-standing …

  • UK 9405310000 Valid Sep 9, 2025 to Sep 8, 2028 · Ruling 600013565 on GOV.UK

    200 bright white light-emitting diode (LED) lights. They have 8 different settings and timer function that can be used for indoor and outdoor use. Each bulb is 0.5m with 5cm spacing between each bulb. It has a green lead wire with the total length being 10.45m. it is powered by 3 x AA battery box (batteries excluded). They are packaged in a coloured flute box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: Classification has been determined in accordance with the following: General interpretative rules (GIR’s): GIR 1 Has been used to classify this product by the terms of heading 9405 - lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5b has been used to identify the type of packaging: Packaged in boxes GIR 6 Has been used to classify the goods to subheading level 940531 – Lighting strings of a kind …

  • UK 9405310000 Valid Jan 26, 2026 to Jan 25, 2029 · Ruling 600015020 on GOV.UK

    Battery Operated LED Bottle Stopper String Lights. Features 20 Warm White LED lights on a 2-metre wire with 10cm bulb spacing. They are elegantly shaped like a wine cork (Plastic)to fit neatly into most standard bottles.re perfect for table decorations, Christmas, weddings, parties, and home décor—bringing life and ambiance to empty glass bottles. also could be used on other items. Packaged for retail sale.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: Classification has been determined in accordance with the following: General interpretative rules (GIR’s): GIR 1 Has been used to classify this product by the terms of heading 9405 - lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5b has been used to identify the type of packaging: Packaged for retail sale. GIR 6 Has been used to classify the goods to subheading level 940531 – Lighting strings of a …

  • UK 9405413100 Valid Jul 22, 2024 to Jul 21, 2027 · Ruling 600010931 on GOV.UK

    A solar powered lantern, that is motion-activated and has an LED filament-style bulb. Made mainly from polypropylene with polyethylene terephthalate, rubber and metal No wiring or batteries required. A motion sensor turns the lantern on and off automatically

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 has been used to classify the goods to subheading level - 940541 - Other electric lamps and lighting fittings; Photovoltaic, designed for use solely with light-emitting diode (LED) light sources. 8 Digit Code 94054131 – Other that searchlights and spotlights; Of …

  • UK 9405413100 Valid Apr 1, 2026 to Mar 31, 2029 · Ruling 600015185 on GOV.UK

    Traffic Cone Lamp - used by placing on a traffic cone to provide extra lighting and visibility. This is made from PVC for the lens and PP (Polypropylene) for the base.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 has been used to classify the goods to subheading level 940541 - Other electric lamps and lighting fittings - Photovoltaic, designed for use solely with light-emitting diode (led) light sources 8 Digit Code 94054131 - Other than Searchlights and Spotlights - of plastics …

  • UK 9405413990 Valid Jan 5, 2024 to Jan 4, 2027 · Ruling 600009503 on GOV.UK

    Outdoor Solar Light Midi contemporary post top luminaire with 126 LED 30W light engine. Integrated 45W monocrystalline solar panel with 22% efficiency. 3,000K colour temperature using a Wide Road Type 1 optic. Aluminium body in RAL 7016 anthracite grey with a polyester powder coat finish and flat toughened glass glazing. IP66 and IK08 protection. 100,000 hour (L90 B10) lifetime. With 12.8V/42Ah/538Wh integral lithium iron phosphate (LiFePO4) battery and solar charge controller. Class III. Packaged in a box

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 9405: Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5(b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 940541: Other electric lamps and lighting fittings; Photovoltaic, designed for use solely with light-emitting diode (led) light sources 8 Digit code 94054139: Other than searchlights and …

  • UK 9405413990 Valid Jan 8, 2024 to Jan 7, 2027 · Ruling 600009504 on GOV.UK

    Outdoor Solar Light Made from Aluminium Solar post top luminaire with 24 LED 12W light engine. Integrated 18W monocrystalline solar panel with 22% efficiency. 3,000K colour temperature using a Wide Road Type 1 optic. Aluminium body in black and flat toughened glass glazing. IP66 and IK09 protection. 100,000 hour (L90 B10) lifetime. With 3.2V 45Ah 144Wh integral lithium iron phosphate (LiFePO4) battery and solar charge controller Packaged in a box

    Justification

    Sofia outdoor Solar Light Mounting Options Post top Ø76mm Post top Ø60mm Glazing Flat toughened glass Housing Aluminium Colours Black RAL 9005 Anthracite Grey RAL 7016 Light Grey RAL 9022 Aluminium RAL 9007 Finish Polyester powder coat IP Rating IP66 IK Rating IK08 Weight 10.9kg Windage 0.148m² Battery Type Lithium iron phosphate (LiFePO4) Battery Voltage 12.8V / 8Ah / 102.4Wh

  • UK 9405421000 Valid Apr 29, 2024 to Apr 28, 2027 · Ruling 600010259 on GOV.UK

    This product is LED Decking lights, used as lighting to be installed into a deck-board. The lights are made of 304 stainless steel bezels and clear plastic PC cover. The goods come packed in boxes in 10s with 1m of cable, 240V plug transformer with 5m extension lead and instructions.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 Has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5 (b) - has been used to identify the type of packaging. - Coloured Box GIR 6 Has been used to classify the goods to subheading level 940542 - Other electric lamps and lighting fittings; Other, designed for use solely with light-emitting diode (led) light sources …

  • UK 9405421000 Valid Mar 12, 2025 to Mar 11, 2028 · Ruling 600012749 on GOV.UK

    An LED (moving) lighting fixture for professional stages, theatres, and TV studios. The housing is made from aluminium and thermoplastic, with high-power LED modules installed onto circuit boards. The precision-engineered optical lenses allows beam control and focus adjustment. The lighting effects include colour mixing, beam shaping, strobe, dimming, and movement effects. The stepper motors allow pan, tilt, and zoom functions and the fixture is controlled digitally or by standalone operation with a digital display for programming. Operates on universal AC power (100-240V, 50/60Hz). The LED lights are packaged in foam-padded flight cases and palleted for shipment.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect:– a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRS): GIR 1 - has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 6 has been used to classify the goods to subheading level 940542 - Other, designed for use solely with light-emitting diode (led) light sources. 8 Digit Code 9405 4210 00 – Searchlights and spotlights. Also classified in accordance with: The Harmonized System …

  • UK 9405423100 Valid Mar 27, 2026 to Mar 26, 2029 · Ruling 600015029 on GOV.UK

    Product is a light up mistletoe garland. It is made up of polyester leaves attached to Polyethylene branches which are attached to the the string light made up of 35 LED plastic bulbs with PVC cable with copper wiring and are decorated with polystyrene berries. The bulbs are static and do not flash. These string lights are battery operated by 3 AA batteries which are not included. The garland is designed to be used indoors to wind around a staircase or around a doorway. It measures L 180 x W 20cm with a lit length of 160cm and a lead cable length of 30cm. The individual parts are machine made and then hand tied together.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (reg 3 (1)(a)); and b. Notes to a section of chapter of the Goods Classification Table (reg 3(1)(b)). General Interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 3B - has been used as the lights rather than the material is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 940542 Other electric lamps and lighting fittings; Other, designed for use solely with light-emitting …

  • UK 9405423100 Valid Jun 8, 2026 to Jun 7, 2029 · Ruling 600015545 on GOV.UK

    400 warm white icicle LED string lights suitable for indoor and outdoor use. The lights are mains powered and operate at low voltage. The set has a 5m lead wire, with 8cm spacing between the bulbs. The drops are spaced 10cm apart and the set includes a 0.3m end connector, giving a total length of 13.2m. The LEDs are attached to a PVC-coated cable with copper wire inside. They are machine manufactured, with the sections subsequently tied together by hand. The goods are packaged in a cardboard box for retail sale.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5 (b) - Has been used to identify the type of packaging as a cardboard box for retail sale. GIR 6 - Has been used to classify the goods to subheading level 9405.42 - Other, designed for use solely with light-emitting diode (led) light sources. 8 Digit Code …

  • UK 9405423990 Valid Feb 6, 2024 to Feb 5, 2027 · Ruling 600009695 on GOV.UK

    The product is a Tower light (floodlight). It's main purpose is to provide lighting, the 3 adjustable LED floodlights are mounted on a mobile tower unit which can be moved around, the lights can be raised up or lowered down. The height is adjustable to a maximum 5.5m when fully extended. The floodlights require a power supply, which is connected through a socket located within the plastic casing. The tower itself is predominantly made of metal, but features plastic casters and a plastic casing. The Tower light is delivered pre-assembled and only requires plugging in. The weight of the item is 300kgs and can withstand winds up to 40 mph (65kmph).

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 9405: Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 has been used to classify the goods to subheading level 940542: Other electric lamps and lighting fittings; Other, designed for use solely with light-emitting diode (LED) light sources 8 Digit code 94054239: Other than searchlights and spotlights; Other than of plastics 10 Digit code 9405423990: Other than …

  • UK 9405423990 Valid Jan 31, 2024 to Jan 30, 2027 · Ruling 600009699 on GOV.UK

    An LED rope light for site lighting in construction. Plastic LED flexible tube on a reel. Powered by plugging into AC. sold in retail packaging box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9405: Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 940542: Other electric lamps and lighting fittings; Other, designed for use solely with light-emitting diode (LED) light sources 8 Digit code 94054239 Other …

  • UK 9405423990 Valid Apr 25, 2024 to Apr 24, 2027 · Ruling 600010299 on GOV.UK

    Bollard LED Light Fitting A bollard is a type of light that is used outside. Bollard with curved top. LM6 high pressure die-cast aluminium head and steel body in mid grey with a polyester powder coat finish and polycarbonate glazing with 0% ULOR free form reflector. Fully programmable DALI driver configurable from 300 to 700mA. Up to 6 LED light engine with outputs up to 1,200lm with a 3,000K colour temperature symmetric or asymmetric light distribution. IP66 and IK10 protection. 100,000 hour (L80) lifetime. For -40˚C to +50˚C ambient operating temperatures. Class I. Operating voltage 220-240V. Packaged in a box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 9405: Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5(b) has been used to identify the type of packaging, a box GIR 6 has been used to classify the goods to subheading level 940542: Other electric lamps and lighting fittings; Other, designed for use solely with light-emitting diode (led) light sources 8 Digit code 94054239: Other than searchlights and …

  • UK 9405423990 Valid Jun 12, 2025 to Jun 11, 2028 · Ruling 600012425 on GOV.UK

    The product is a pair of LED pillar candles made of wax and plastic. The decorative candles are battery operated. Both candles are 6cm in width at the base. The height of the candles is 20cm and 25cm. The weight of both candles is 392.5g. The candles are packaged in card box with polystyrene protection.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 3b - has been used as the LED light is considered to be the essential character. GIR 5 (b) - has been used to identify the type of packaging - cardboard box. GIR 6 has been used to classify the goods to subheading level 940542: Other electric lamps and lighting …

  • UK 9405423990 Valid Oct 24, 2025 to Oct 23, 2028 · Ruling 600014058 on GOV.UK

    An LED Light Strip Kit that has a warm tone (2700K) LED light strip in black rubber casing, Available in packs of 2 or 4 strips at 240cm and 300cm length. Kit includes 2 or 4 LED strips, LED power cables, power unit and dimmer. Packaged in a cardboard box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9405: Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 940542: Other electric lamps and lighting fittings; Other, designed for use solely with light-emitting diode (LED) light sources 8 Digit code 94054239 …

  • UK 9405499090 Valid Apr 28, 2025 to Apr 27, 2028 · Ruling 600012741 on GOV.UK

    A Plug In Electric Wax Melt Burner - An electric wax melt burner that contains a lightbulb. The product is plugged directly into a mains electric socket and when turned on illuminates a darkened room, whilst the heat from the bulb melts the fragranced wax to odourise the room (wax not supplied). It is predominantly made of glass and is available in a variety of different colours/designs. The product includes 2 glass cups and 2 bulbs. It is packed in a white picture box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 Has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 3(b) Has been used as the lighting function is considered to be the essential character. GIR 5(b) Has been used to identify the type of packaging. GIR 6 Has been used to classify the goods to subheading level 940549 - Other electric lamps and lighting fittings; …

  • UK 9405500010 Valid Sep 30, 2024 to Sep 29, 2027 · Ruling 600011134 on GOV.UK

    Aluminium candleholders, handmade and for decorative use around the home. The base metal is then finished off with a black or silver lacquer to look like antique brass finish. Candle holders have a recess on top to either accommodate a taper or pillar candle. In a set of 2 or 3 and packaged in a plain brown carton.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of Heading 9405- Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5 (b) has been used to identify packaging ; plain brown carton. GIR 6 has been used to classify the goods to subheading level 940550 : Non-electrical luminaires and lighting fittings. 10 digit code : hand-made. Also classified in accordance with :- Harmonised …

  • UK 9405500010 Valid Jun 23, 2026 to Jun 22, 2029 · Ruling 600015856 on GOV.UK

    A decorative lantern to hold a candle. The hand made lantern features a black steel frame with four glass panels. The pyramid-shaped roof contains ventilation holes, and a carrying handle. The base has a reflective mirror and designed to hold a pillar candle.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of Heading 9405- Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 6 - Has been used to classify the goods to subheading level 940550 - Non-electrical luminaires and lighting fittings. 10 Digit Code 9405500010 - Hand-made. Also classified in accordance with: Harmonised System Explanatory Notes (HSEN's) general notes (3) to chapter …

  • UK 9405500010 Valid Jun 30, 2026 to Jun 29, 2029 · Ruling 600015857 on GOV.UK

    A handmade candle holder consisting of a round base made from sandstone and a removable glass tumbler made from borosilicate. The candle is placed inside the glass, which sits securely on the base.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of Heading 9405- Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 6 - Has been used to classify the goods to subheading level 940550 - Non-electrical luminaires and lighting fittings. 10 Digit Code 9405500010 - Hand-made. Also classified in accordance with: Harmonised System Explanatory Notes (HSEN's) general notes (3) to chapter …

  • UK 9405500090 Valid May 3, 2024 to May 2, 2027 · Ruling 600010414 on GOV.UK

    Brass candelabra for holding candle. The product is shaped to hold the bottom of the candle, there is also a small spike to hold it in position.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9405: Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 6 has been used to classify the goods to subheading 940550: Non-electrical luminaires and lighting fittings. 10 Digit Code 9405500090: Other than hand-made. Also classified in accordance with: Harmonised System Explanatory Notes (HSEN) to heading 94.05 Note (i)(6)

  • UK 9405500090 Valid Jun 6, 2024 to Jun 5, 2027 · Ruling 600010554 on GOV.UK

    Lantern Candle Holder Holds a tealight- could hold a small candle - small candle could be used but the design does show a Tealight so this would be the most likely option. Mini Square Lantern Candle Holder is made using stainless steel and glass H19 x W10 x D10cm

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s Gir 1 has been used to classify this product by the terms of heading 9405 for lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. Gir 6 has been used to classify the goods to subheading level 9405 50 for Non-electrical lamps and lighting fittings. Ten digit code 94055000 90 other than Hand-made. Also classified in accordance with : Harmonised System Explanatory Notes (HSEN) to 9405 (I)

  • UK 9405500090 Valid Jul 1, 2024 to Jun 30, 2027 · Ruling 600010789 on GOV.UK

    3pc Led Tealight Candles supplied with 3 Cell batteries packaged in a blister card. These can be used safely around the house and garden to give a look of a glow from a candle. LED Tea Lights are the safest alternative to real tea light candles and are designed to fit tea light holders.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9405 for lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5 (b) - Has been used to identify the type of packaging - Packed in a Blister Card GIR 6 has been used to classify the goods to subheading level 9405 50 for Non-electrical lamps and lighting fittings. Ten digit code 94055000 90 other than Hand-made. Also classified in …

  • UK 9405500090 Valid Jan 21, 2026 to Jan 20, 2029 · Ruling 600014945 on GOV.UK

    The Wooden LED Candle Bridge is an ornament/decoration that can be used at and time or festive periods of the year. It brings a realistic warm feeling, bright orange flickering glow to your home. Made from wood, plastic and has battery operated LED lights. Comes packed in a paper coloured box for individual Retail Sale.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9405 for lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5 (b) - Has been used to identify the type of packaging - packed in a paper coloured box GIR 6 has been used to classify the goods to subheading level 9405 50 for Non-electrical lamps and lighting fittings. Ten digit code 94055000 90 other than Hand-made. Also classified …

  • UK 9405500090 Valid Jan 22, 2026 to Jan 21, 2029 · Ruling 600014946 on GOV.UK

    The White twig LED tree is 60cm (23.6 inches) in size. It is battery operated and will add a glow to your room with its LED lights which illuminate the branches. It is ideal for evening occasions or simply adding a lovely detail to your home. The tree is freestanding and can be placed on a flat surface. The tree can be used to display decorations on the branches. The tree has an on/off switch. It is made from plastic and comes packed in a paper coloured box for individual Retail Sale

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9405 for lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5 (b) - Has been used to identify the type of packaging - packed in a paper coloured box GIR 6 has been used to classify the goods to subheading level 9405 50 for Non-electrical lamps and lighting fittings. Ten digit code 94055000 90 other than Hand-made. Also classified …

  • UK 9405500090 Valid Jan 22, 2026 to Jan 21, 2029 · Ruling 600014947 on GOV.UK

    The Light up Globes Set of 3 are battery operated warm white LED glass globes. Comes a Set of 3 glass globes to decorate your home. Size: 18cmD/ 15cmD/ 12cmD approx. Each with 50L/25L/15L warm white LED silver wire lights They made from glass, plastic and has LED lights. Packed in a paper colour box for Retail Sale

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9405 for lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5 (b) - Has been used to identify the type of packaging - packed in a paper coloured box GIR 6 has been used to classify the goods to subheading level 9405 50 for Non-electrical lamps and lighting fittings. Ten digit code 94055000 90 other than Hand-made. Also classified …

  • UK 9405500090 Valid May 15, 2026 to May 14, 2029 · Ruling 600015431 on GOV.UK

    A metal candle holder. Made from a zinc alloy the holder has a slim stem, a round base for stability and a rounded cup to hold a candle. Halfway up the stem there is a decorative figure of a bat with two dangling ribbons all in the same metal. The item has been finish with a black powder coating and is packaged in bubble wrap & hang tag label for retail sale in shops.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of Heading 9405- Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5 (b) - Has been used to identify packaging - Bubble wrap & hang tag label. GIR 6 - Has been used to classify the goods to subheading level 940550 - Non-electrical luminaires and lighting fittings. 10 Digit Code 9405500090 - Other than hand-made. Also classified in …

  • UK 9405500090 Valid May 21, 2026 to May 20, 2029 · Ruling 600015434 on GOV.UK

    A five armed candle holder in the form of a gothic style candelabra. The item is made from plastic with aluminium used for the candle cups. The four arms are ornately decorated with a scroll design, and each supports an aluminium cup to hold the candles. The plastic body features a central pumpkin with two smaller pumpkins on either side. The candelabra has a large, rounded base to provide stability and the whole of the item has been finished with a black powder coating. Comes packaged in Styrofoam for retail sale.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of Heading 9405- Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5 (b) - Has been used to identify packaging - Styrofoam. GIR 6 - Has been used to classify the goods to subheading level 940550 - Non-electrical luminaires and lighting fittings. 10 Digit Code 9405500090 - Other than hand-made. Also classified in accordance with: …

  • UK 9405612090 Valid Dec 4, 2023 to Dec 3, 2026 · Ruling 600009209 on GOV.UK

    This is an LED neon sign which it is to be used for baby showers. It has an electrical USB point with a 2 metre lead for plugging into a socket which lights up and reads "Baby In Bloom." The sign measures 40 x 32 x 1.6cm. It is made from polyvinyl chloride. It is packed in a white box with a coloured label in 6 sets per carton measuring 43 x 18 x 35cm and weighs 5.1kg. It is made in china.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg (1) (b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5(b) has been used to identify the type of packaging. Packed in a cardboard box then in 6 sets per carton. GIR 6 has been used to classify the goods to subheading level 940561 - Illuminated signs, illuminated nameplates and the like; Designed for use solely with …

  • UK 9405612090 Valid Dec 4, 2023 to Dec 3, 2026 · Ruling 600009210 on GOV.UK

    This is a decorative LED neon sign for lighting up at weddings and other celebrations. The sign measures 40.5 x 15.5 x 1.6cm. It has an electrical USB point with a 2 metre lead for plugging in a socket which lights up and reads "Mr & Mrs". It is packed in a white box with a coloured label in 6 sets per carton measuring 43.5 x 18 x 18.5cm and weighs 3.4kg. It is put up for retail sale and produced in China.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg (1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5(b) has been used to identify the type of packaging. Packed in a cardboard box then in 6 sets per carton. GIR 6 has been used to classify the goods to subheading level 940561 - Illuminated signs, illuminated nameplates and the like; Designed for use solely with …

  • UK 9405612090 Valid Dec 4, 2023 to Dec 3, 2026 · Ruling 600009212 on GOV.UK

    This is a sign on a black background with the words "Happy Birthday" in colourful letters that lights up for birthday parties. It measures 40 x 25cm, and it is packaged in a white box with a coloured label, 6 sets per carton measuring 43 x 17 x 28cm weighing 4.6kg. It is made in China.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg (1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR 5(b) has been used to identify the type of packaging. Packed in a cardboard box then in 6 sets per carton. GIR 6 has been used to classify the goods to subheading level 940561 - Illuminated signs, illuminated nameplates and the like; Designed for use solely with light …

  • UK 9405920090 Valid Jan 23, 2024 to Jan 22, 2027 · Ruling 600009539 on GOV.UK

    The product is a Honeycomb filter for spotlights, it is a small plastic disc shaped material with a honeycomb cut out pattern. Its primary purpose is to securely attach to the light and effectively diminish the intensity of brightness. Each box contains a single filter, with measurements of 30x30x20mm and a weight of 0.6 KGS.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIRS) GIR 1 has been used to classify the product by the terms of heading 9405 Luminaires and lighting fittings, including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light sources, and parts thereof not elsewhere specified or included GIR 5b has been used to identify normal packaging for transport-brown box GIR 6 has been used to classify the goods to subheading level 940592 parts of plastic 10 digit code 9405920090 other than parts of articles of subheading no 940510 or 940560 for use in civil aircraft …

  • UK 9405920090 Valid Jan 12, 2026 to Jan 11, 2029 · Ruling 600014336 on GOV.UK

    Polycarbonate Glazing for outdoor light fitting. It is in the shape of a cone and the material is water clear, UV stabilised polycarbonate. The finish is optical high gloss with casting thickness of 0.25mm. The product is packaged in a box for transport and retail purposes.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5 (b) - Has been used to identify the type of packaging GIR 6 - Has been used to classify the goods to subheading level 9405 92 – Of plastics 10 Digit Code 9405 92 00 90 – Other than parts of the articles of subheading 9405 11, 9405 19, 9405 61 or 9405 69, for …

  • UK 9405990020 Valid Feb 13, 2024 to Feb 12, 2027 · Ruling 600009794 on GOV.UK

    The product is a mounting base for a street lamp It is made from mild steel At the bottom of the unit is a hollow cylindrical section capped at one end and open at the other, the capped end is positioned uppermost. Dimensions of this section are approximately 90mm (H) by 75mm(W). Attached to the middle of the closed end of this section is a hollow tube measuring approximately 190mm (L) with a width of 25mm. Attached to the base section are 4 flat question mark shaped strips of a width of approximately 25mm spaced equally apart around the base section and positioned in such a way that they surround the longer hollow tube pointing upwards. The 4 pieces curve outwards and are bent horizontal at the top with mounting holes at the end of each one. The purpose of this unit is to serve as a base onto which the lamp and its housing which will be attached to complete the whole assembly. The assembled unit is to be secured onto the lamp post. This item is described as being handmade Packaging for this unit is a cardboard box

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included classified to last in numerical order within the tariff. GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 9405.99 – Parts; other than of glass; other than of plastics Code to 10 digits - 9405 9900 20 – Hand …

  • UK 9405990090 Valid Apr 30, 2024 to Apr 29, 2027 · Ruling 600010345 on GOV.UK

    Socket Plate Used for outdoor lighting. The socket plate is a part that is for lanterns. The socket plate allows for one of the external sockets to be oriented in the right direction. Made from galvatite sheet. Packaged in a box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 9405: Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5(b) has been used to identify the type of packaging, a box GIR 6 has been used to classify the goods to subheading level 940599: Parts; Other than of glass or plastics 10 Digit code 9405990090: Other than parts of the articles of subheading 9405 11, 9405 19, 9405 61 or 9405 69, of base metal, for use in civil …

  • UK 9405990090 Valid Jun 10, 2024 to Jun 9, 2027 · Ruling 600010468 on GOV.UK

    Parallel Column used for luminaire. Made from aluminium and has a flush door size 0170.0mm x 1400mm. The light fits on the top of the column.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading - 9405: Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 - has been used to classify the goods to subheading level 940599 - Parts; Other than of glass; Other than of plastics 10 Digit Code - 9405990090 - Other than parts of the articles of subheading 9405 11, 9405 19, 9405 61 or 9405 69, of base metal, for use in civil aircraft; Other than hand-made Also …

  • UK 9405990090 Valid Sep 26, 2024 to Sep 25, 2027 · Ruling 600010753 on GOV.UK

    The product is a heatsink made from aluminium. It comprises an aluminium profile cut to a specific length and shape with holes drilled in designated places. It is designed to be mounted to an LED based lighting system. As power is fed to the LEDs heat is generated. The heatsink functions by absorbing the heat and wicking it away in order to prevent the LEDs from overheating. A series of serrated fins protrude upwards from the base of the heatsink to assist in heat dissipation.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 has been used to classify the goods to sub-heading 9405 99 – Parts; other than plastics; other than glass Code to 10 digits - 9405 9900 90 – Other than elsewhere specified in this subheading Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) …

  • UK 9405990090 Valid Sep 26, 2024 to Sep 25, 2027 · Ruling 600010754 on GOV.UK

    The product is a heatsink made from aluminium. It comprises an aluminium profile cut to a specific length and shape with holes drilled in designated places. It is designed to be mounted to an LED based lighting system. As power is fed to the LEDs heat is generated. The heatsink functions by absorbing the heat and wicking it away in order to prevent the LEDs from overheating. A series of serrated fins protrude upwards from the base of the heatsink to assist in heat dissipation.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 has been used to classify the goods to sub-heading 9405 99 – Parts; other than plastics; other than glass Code to 10 digits - 9405 9900 90 – Other than elsewhere specified in this subheading Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) …

  • UK 9405990090 Valid Oct 21, 2024 to Oct 20, 2027 · Ruling 600011545 on GOV.UK

    The bollard tube is made from Aluminium. Once completed the bollard tube used for outdoor lighting. The bollards is a column tube in shape and has 4 welded bars that are welded securely for the door to be installed. Inside the bollard tube it will have a place for the connections to be fitted for the operation of the light. The tube has 3 threaded holes at the top for the light fitting and casing to be installed and attached which will complete the light bollard. The product is a recognizable and necessary part of an electric lighting fixture.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading - 9405: Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5 (b) - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 940599 - Parts; Other than of glass; Other than of plastics 10 Digit Code - 9405990090 - Other than parts of the articles of subheading 9405 11, 9405 19, 9405 61 or 9405 69, of base …

  • UK 9405990090 Valid Jun 6, 2025 to Jun 5, 2028 · Ruling 600013188 on GOV.UK

    This is a base for a specific lamp that is designed to fit onto the bottom of the lamp when clamping onto a table or similar surface is not possible. It weighs 2.4 kg, and the base is constructed from mine sand composed of 70% steel and 30% plastic, and is enclosed in a durable steel cover for added stability and aesthetic appeal. The table base is 8.7 inches in diameter, 1.4 inches thick.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 6 has been used to classify the goods to sub-heading 9405 99 – Parts; Other than of glass; Other than of plastics 10 digit Code 9405990090 - Other than parts of the articles of subheading 9405 11, 9405 19, 9405 61 or 9405 69, of base metal, for use in civil aircraft; Other …

  • UK 9405990090 Valid Jan 19, 2026 to Jan 18, 2029 · Ruling 600014344 on GOV.UK

    Cast upper base which is a part used for an outdoor light fitting. The product is made from LM6 - aluminium with a shot blast finish. The product is not handmade and it is packaged in a box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5 (b) - Has been used to identify the type of packaging GIR 6 - Has been used to classify the goods to subheading level 9405.99 – Other than elsewhere specified 10 Digit Code 9405990090 – Other than elsewhere specified Also classified in accordance with: …

  • UK 9405990090 Valid Feb 2, 2026 to Feb 1, 2029 · Ruling 600014635 on GOV.UK

    A part for a lighting fitting, consisting of a housing blanking cap, supplied with a separate ring gasket that must be used with the cap for the product to function correctly. Made from LM6 Aluminium, it prevents accidental contact with live wires and protects against dust and dirt etc. It is packaged in a box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR1 – has been used to classify this product by the terms of heading 9405 – Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR5(b) – has been used to identify the type of packaging – in a box. GIR6 – has been used to classify the goods to subheading level 940599 – Parts; Other than elsewhere specified in this heading. 10 Digit code – 9405990090 – Other than elsewhere specified in this heading. …

  • UK 9405990090 Valid Apr 30, 2026 to Apr 29, 2029 · Ruling 600015299 on GOV.UK

    Shaft ring for an outdoor lighting column made from grey iron. The edge of the ring has 16 domed protrusions, equally spaced, around the entire edge. A hole is drilled into the shaft ring for fixing to the column and the inside surface of the ring is smooth. The product is not handmade and is packed in cartons.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9405 - Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included GIR 5 (b) - Has been used to identify the type of packaging. Packed in cartons GIR 6 - Has been used to classify the goods to subheading level 940599 – other than elsewhere specified 10 Digit Code 9405990090 – other than elsewhere specified in this subheading Also …

  • UK 9405990090 Valid Apr 21, 2026 to Apr 20, 2029 · Ruling 600015300 on GOV.UK

    An aluminium Shaft ring 76.1 ID provides support and strengthens the connection between the sections of the lighting columns. Packaged in carton

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR1 – has been used to classify this product by the terms of heading 9405 – Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included. GIR5(b) – has been used to identify the type of packaging – Packed in a carton GIR6 – has been used to classify the goods to subheading level 940599 – Parts; Other than elsewhere specified in this heading. 10 Digit code – 9405990090 – Other than elsewhere specified in this …

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 9405000000

  • Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 9405

    Art. 3i, goods generating significant revenue for Russia

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 %
  • Czechia 21 % maybe 12 %
  • Denmark 25 %
  • Estonia 24 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 940500 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included", it is crucial to have the correct HS code or TARIC code. The HS code 9405000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included".
  2. Check if any additional licenses, permits, or certificates are required to import "Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included" is 9405000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included".

HS Code structure

94
Chapter
05
Heading
00
Subheading
00
CN Subheading
00
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 94 was selected for furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; luminaires and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like; prefabricated buildings

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 05 refers to Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included.

HS Code tree structure

9400000000 80

Chapter FURNITURE; BEDDING, MATTRESSES, MATTRESS SUPPORTS, CUSHIONS AND SIMILAR STUFFED FURNISHINGS; LUMINAIRES AND LIGHTING FITTINGS, NOT ELSEWHERE SPECIFIED OR INCLUDED; ILLUMINATED SIGNS, ILLUMINATED NAMEPLATES AND THE LIKE; PREFABRICATED BUILDINGS

9405000000 80

Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included

9405110000 10

- Chandeliers and other electric ceiling or wall lighting fittings, excluding those of a kind used for lighting public open spaces or thoroughfares

9405110000 80

- - Designed for use solely with light-emitting diode (LED) light sources

9405114000 80

- - - Of plastics or of ceramic materials

9405114010 80

- - - - For use in civil aircraft

9405114090 80

- - - - Other

9405115000 80

- - - Of glass

9405119000 80

- - - Of other materials

9405119010 80

- - - - Hand-made

9405119020 80

- - - - Of base metal, for use in civil aircraft

9405119090 80

- - - - Other

9405190000 80

- - Other

9405194000 80

- - - Of plastics or of ceramic materials

9405194010 80

- - - - For use in civil aircraft

9405194090 80

- - - - Other

9405195000 80

- - - Of glass

9405199000 80

- - - Of other materials

9405199010 80

- - - - Hand-made

9405199020 80

- - - - Of base metal, for use in civil aircraft

9405199090 80

- - - - Other

9405210000 10

- Electric table, desk, bedside or floor-standing luminaires

9405210000 80

- - Designed for use solely with light-emitting diode (LED) light sources

9405214000 80

- - - Of plastics or of ceramic materials

9405215000 80

- - - Of glass

9405219000 80

- - - Of other materials

9405219010 80

- - - - Hand-made

9405219090 80

- - - - Other

9405290000 80

- - Other

9405294000 80

- - - Of plastics or of ceramic materials

9405295000 80

- - - Of glass

9405299000 80

- - - Of other materials

9405299010 80

- - - - Hand-made

9405299090 80

- - - - Other

9405310000 10

- Lighting strings of a kind used for Christmas trees

9405310000 80

- - Designed for use solely with light-emitting diode (LED) light sources

9405390000 80

- - Other

9405410000 10

- Other electric luminaires and lighting fittings

9405410000 80

- - Photovoltaic, designed for use solely with light-emitting diode (LED) light sources

9405411000 80

- - - Searchlights and spotlights

9405413100 10

- - - Other

9405413100 80

- - - - Of plastics

9405413900 80

- - - - Other

9405413910 80

- - - - - Hand-made

9405413990 80

- - - - - Other

9405420000 80

- - Other, designed for use solely with light-emitting diode (LED) light sources

9405421000 80

- - - Searchlights and spotlights

9405423100 10

- - - Other

9405423100 80

- - - - Of plastics

9405423900 80

- - - - Other

9405423910 80

- - - - - Hand-made

9405423990 80

- - - - - Other

9405490000 80

- - Other

9405491000 80

- - - Searchlights and spotlights

9405494000 10

- - - Other

9405494000 80

- - - - Of plastics

9405499000 80

- - - - Of other materials

9405499010 80

- - - - - Hand-made

9405499090 80

- - - - - Other

9405500000 80

- Non-electrical luminaires and lighting fittings

9405500010 80

- - Hand-made

9405500090 80

- - Other

9405610000 10

- Illuminated signs, illuminated nameplates and the like

9405610000 80

- - Designed for use solely with light-emitting diode (LED) light sources

9405612000 80

- - - Of plastics

9405612010 80

- - - - Illuminated signs, illuminated name-plates and the like, for use in civil aircraft

9405612090 80

- - - - Other

9405618000 80

- - - Of other materials

9405618010 80

- - - - Illuminated signs, illuminated name-plates and the like, of base metal, for use in civil aircraft

9405618020 80

- - - - Hand-made

9405618090 80

- - - - Other

9405690000 80

- - Other

9405692000 80

- - - Of plastics

9405692010 80

- - - - Illuminated signs, illuminated name-plates and the like, for use in civil aircraft

9405692090 80

- - - - Other

9405698000 80

- - - Of other materials

9405698010 80

- - - - Illuminated signs, illuminated name-plates and the like, of base metal, for use in civil aircraft

9405698020 80

- - - - Hand-made

9405698090 80

- - - - Other

9405910000 10

- Parts

9405910000 80

- - Of glass

9405911000 80

- - - Articles for electrical lighting fittings (excluding searchlights and spotlights)

9405919000 80

- - - Other

9405920000 80

- - Of plastics

9405920010 80

- - - Parts of the articles of subheading 9405 11, 9405 19, 9405 61 or 9405 69, for use in civil aircraft

9405920090 80

- - - Other

9405990000 80

- - Other

9405990010 80

- - - Parts of the articles of subheading 9405 11, 9405 19, 9405 61 or 9405 69, of base metal, for use in civil aircraft

9405990020 80

- - - Hand-made

9405990090 80

- - - Other