Numéro tarifaire 3918900000 80 - en autres matières plastiques

Estimer le coût d’importation pour 391890

Simple estimation. La valeur en douane est le prix incluant le transport et l’assurance jusqu’à la frontière de l’UE. Les accises, autres redevances et droits antidumping propres à un producteur ne sont pas inclus. Les taux préférentiels exigent une preuve d’origine valable. Groupes de pays et exclusions : TARIC, au novembre 2026.

Mesures à l’exportation pour 3918900000

Ce qui s’applique quand ces marchandises quittent l’UE : contrôles à l’exportation, autorisations (biens à double usage et autres), interdictions par destination et unité supplémentaire de la déclaration d’exportation.

Historique

Règles d’origine préférentielles pour 3918900000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

• EU-Egypt Association Agreement · Égypte

  EU-Morocco Association Agreement · Maroc

  Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• Autonomous Trade Preferences (Western Balkans) · Kosovo

  Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below:

  - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  - Other:

  - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Canada CETA · Canada

  A change from any other heading.

• EU-Chile Association Agreement · Chili

  Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

  Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

• EU-Algeria Association Agreement · Algérie

  Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product,

  and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EPA CARIFORUM

  Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – Other: – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: – the value of all the materials used does not exceed 50 % of the ex-works price of the product; – the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

  Semi-manufactures and articles of plastics; except for headings Nos ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

  Plastics and articles thereof; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Jordan Association Agreement · Jordanie

  Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Other: - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Japan EPA · Japon

  CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

• EU-Korea FTA · Corée du Sud

  Plastics in primary forms, waste, parings and scrap, of plastic; semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Central America Association Agreement

  Semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Lebanon Association Agreement · Liban

  Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Mexico Global Agreement · Mexique

  Semi-manufactures and articles of plastics; except for headings Nos ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 50 % of the ex-works price of the product [23] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [24] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product [25] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Palestine Interim Association Agreement · Palestine

  Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked - Other: / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product 1 / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

• EU-Singapore FTA · Singapour

  Plastics and articles thereof: except for: / or: Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Tunisia Association Agreement · Tunisie

  Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 3918900000

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Règlements de classement de l’UE pour 3918900000

Règlements de la Commission qui ont classé des marchandises précises sous ce code. Ils lient les douanes de tous les États membres pour des marchandises identiques.

• 3918 90 00 27 janv. 2017 · Règlement sur EUR-Lex
  Un article («tapis puzzle tatami») en EVA (éthylène-acétate de vinyle), constitué de pavés de 100 × 100 cm dotés d'une surface antidérapante et d'une épaisseur d'environ 3 cm. Les pavés s'emboîtent les uns dans les autres selon le principe du puzzle et sont fermement posés sur une autre surface, formant ainsi un tapis.

  L'article, grâce à la structure cellulaire du tapis, est destiné à absorber les chocs générés lors d'activités sportives diverses (comme le yoga, la gymnastique ou les arts martiaux) dans le but de protéger le corps. Le «tapis puzzle tatami» est également destiné à servir d'isolant acoustique, thermique et hydrofuge. Il permet ainsi d'éviter d'endommager la surface sur laquelle il est posé et protège les personnes pratiquant diverses autres activités, notamment en cas d'utilisation dans des crèches ou par des artistes. Voir l'image (*1).

  Motifs

  Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée, ainsi que par le libellé des codes NC 3918 et 3918 90 00 . Le classement dans la position 9506 comme articles et matériel pour la culture physique, la gymnastique, l'athlétisme, les autres sports ou les jeux de plein air est exclu parce que le revêtement de sol en matières plastiques non assemblé n'est pas uniquement destiné à la pratique de sports mais sert aussi à la protection de surfaces et de personnes pratiquant d'autres activités. Par conséquent, l'article doit être classé en fonction de sa matière constitutive (plastique). Il convient dès lors de le classer en tant que revêtements de sols en matières plastiques sous le code NC 3918 90 00 .

• 3918 90 00 19 mars 2013 · Règlement sur EUR-Lex
  Élément de plancher en bois composite, mesurant environ 0,15 × 0,02 × 3,7 m, constitué de fibres de déchets de bois (60 %), de plastiques recyclés (PEHD) (30 %), d’additifs de matière non plastique, de matières de remplissage, de stabilisateurs d’UV et de pigments (10 %), fabriqué par extrusion. Il s’agit d’un profilé rectangulaire, présentant une densité de 1,20 g/cm3.

  La face supérieure est grainée et texturée, tandis que la face inférieure est rainurée. La planche présente des sillons sur toute la longueur de son côté. Il présente les caractéristiques propres à un produit en matières plastiques figées et rigides, dont le matériau de remplissage est constitué de déchets de bois. Il s’agit d’un substitut du bois, destiné par exemple à la fabrication de pontons et de passerelles.

  Motifs

  Le classement est déterminé par les dispositions des règles générales 1, 3 b) et 6 pour l’interprétation de la nomenclature combinée ainsi que par le libellé des codes NC 3918 et 3918 90 00 . Étant donné que les fibres de bois ne constituent que le matériau de remplissage et que celles-ci sont contenues dans la matière plastique qui confère au produit son caractère essentiel, un classement au chapitre 44 en tant qu’articles en bois est exclu (voir aussi les notes explicatives du SH relatives au chapitre 44). Le produit est donc considéré comme une matière plastique utilisée dans la fabrication des planchers. Il convient dès lors de le classer en tant que revêtements de sol en matières plastiques sous le code NC 3918 90 00 .

Renseignements tarifaires du Royaume-Uni pour 3918900000

Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.

• UK 3918900090 Valable du 12 déc. 2023 au 11 déc. 2026 · Décision 600009314 sur GOV.UK

  Decking boards designed to be fitted to a balcony frame to provide decked floor covering. These are made from wood shavings, recycled plastic and polyethylene resin.The materials have been blended together then extruded to produce the decking boards

  Justification

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) Classification has been determined in accordance with the following: General Interpretative Rules (GIR)s:GIR 1 has been used to classify this product by the terms of heading 3918: Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9 to this chapter GIR 3b has been used as the plastic resin binds the wood fibres and other materials together, therefore the resin is considered to be the essential character GIR 6 Has been used to classify this product by the terms of heading 391890:Of other plastics 10 Digit code 3918900090: Other than for use in certain …

• UK 3918900090 Valable du 12 déc. 2023 au 11 déc. 2026 · Décision 600009349 sur GOV.UK

  Composite Decking Products Used for building materials. Made by being rolled & pressed. Packaged in pallets

  Justification

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 3918: Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9 to this chapter GIR 3b has been used as the plastic is considered to be the essential character. GIR 5(b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 391890: Of other plastics other than of polymers of vinyl chloride 10 Digit code 3918900090: Other than for use in certain types of aircraft Also classified in accordance with: Additional Note 2 to Chapter 39 Harmonized …

• UK 3918900090 Valable du 16 avr. 2024 au 15 avr. 2027 · Décision 600010265 sur GOV.UK

  Composite decking boards made from wood powder, plastic resin and additional chemicals. The goods are used as outdoor deck flooring. The deck boards come in 3.6m lengths packed in a plastic wrapping.

  Justification

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) Classification has been determined in accordance with the following: General Interpretative Rules (GIR)s: GIR 1 has been used to classify the product by the terms of heading 3918- Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9 to this chapter GIR 3 b has been used as the plastic resin is considered to be the essential character GIR 5b has been used to identify the packaging GIR 6 has been used to classify the goods to subheading level 391890- Of other plastics 10 digit code 3918900090- Other than for use in certain types of aircraft Also …

Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.

Commerce de l’UE en 2025 pour 391890

Importations extra-UE

356,3 M €

257 181 t

Exportations extra-UE

116 M €

Principaux pays d’origine selon la valeur importée

1. Chine 297,3 M €
2. Royaume-Uni 15,3 M €
3. Israël 15,2 M €
4. États-Unis 10,2 M €
5. Turquie 5,2 M €

Codes NC8 sous ce code : 1. Source : Eurostat, Comext, CC BY 4.0, traité par hscode.info. Le commerce confidentiel n’est pas attribué aux codes.

Droit d’importation au Royaume-Uni pour 391890

• 6%

Droits de pays tiers de tous les codes britanniques sous cette sous-position du SH. Source : UK Department for Business and Trade, au 2 nov. 2026. Le tarif britannique diffère du tarif de l’UE.

TVA à l’importation dans l’UE

• Allemagne 19 %
• Autriche 20 %
• Belgique 21 %
• Bulgarie 20 %
• Chypre 19 %
• Croatie 25 %
• Danemark 25 %
• Espagne 21 %
• Estonie 24 % éventuellement 9 %
• Finlande 25,5 %
• France 20 %
• Grèce 24 %
• Hongrie 27 %
• Irlande 23 %
• Italie 22 %
• Lettonie 21 %
• Lituanie 21 %
• Luxembourg 17 %
• Malte 18 %
• Pays-Bas 21 %
• Pologne 23 %
• Portugal 23 %
• Roumanie 21 %
• Slovaquie 23 %
• Slovénie 22 %
• Suède 25 %
• Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Informations

Structure du HS-Code

Arborescence HS-Code