Numéro tarifaire 3921110000 10 - Produits alvéolaires

Estimer le coût d’importation pour 392111

Simple estimation. La valeur en douane est le prix incluant le transport et l’assurance jusqu’à la frontière de l’UE. Les accises, autres redevances et droits antidumping propres à un producteur ne sont pas inclus. Les taux préférentiels exigent une preuve d’origine valable. Groupes de pays et exclusions : TARIC, au novembre 2026.

Mesures à l’exportation pour 3921110000

Ce qui s’applique quand ces marchandises quittent l’UE : contrôles à l’exportation, autorisations (biens à double usage et autres), interdictions par destination et unité supplémentaire de la déclaration d’exportation.

Contrôles et documents 4

	Destination	Début	Droit / Impôt	Base légale Type de mesure
BY	Belarus BY	25-02-2025	Document requis interdit sans document Détails	Régulation0765/06 Export control 766
RU	Russian Federation RU	27-09-2024	Document requis interdit sans document Détails	Régulation0833/14 Export control 709
1008	All third countries 1008	05-03-2026	Document requis interdit sans document Détails	Régulation0573/24 Export control of fluorinated greenhouse gases 765
1008	All third countries 1008	11-03-2024	Document requis interdit sans document Détails	Régulation0590/24 Export control on ozone-depleting substances 725

Historique

Règles d’origine préférentielles pour 3921110000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

• EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Îles Féroé, Liechtenstein, Norvège, Suisse

  EU-Iceland FTA · Islande

  EU-Ukraine DCFTA · Ukraine

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Georgia DCFTA · Géorgie

  EU-Moldova DCFTA · Moldavie

  Pan-Euro-Mediterranean (PEM) Convention · Albanie, Andorre, Bosnie-Herzégovine, Égypte, Îles Féroé, Islande, Kosovo, Liechtenstein, Macédoine du Nord, Monténégro, Norvège, Palestine, Suisse, Turquie

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [20] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Egypt Association Agreement · Égypte

  EU-Morocco Association Agreement · Maroc

  Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• Autonomous Trade Preferences (Western Balkans) · Kosovo

  Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below:

  - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  - Other:

  - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Canada CETA · Canada

  A change from any other heading.

• EU-Chile Association Agreement · Chili

  Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

  Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

• EU-Algeria Association Agreement · Algérie

  Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product,

  and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EPA CARIFORUM

  Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – Other: – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: – the value of all the materials used does not exceed 50 % of the ex-works price of the product; – the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron (f) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EPA Eastern and Southern Africa

  Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

  Semi-manufactures and articles of plastics; except for headings Nos ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [19] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EPA Pacific · Fidji, Îles Salomon, Papouasie-Nouvelle-Guinée, Samoa

  Foils of plastic, metallized / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

  Foils of plastic, metallised / or: (a) LDCs Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [24] or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [25] or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [22] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [23] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %. / or: [25] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

• EU-Israel Association Agreement · Israël

  Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [28] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Jordan Association Agreement · Jordanie

  Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Other: - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [7] or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product [7] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

• EU-Japan EPA · Japon

  CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

• EU-Korea FTA · Corée du Sud

  Plastics in primary forms, waste, parings and scrap, of plastic; semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Central America Association Agreement

  Articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Lebanon Association Agreement · Liban

  Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Mexico Global Agreement · Mexique

  Semi-manufactures and articles of plastics; except for headings Nos ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 50 % of the ex-works price of the product [23] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [24] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product [25] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [26] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Palestine Interim Association Agreement · Palestine

  Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked - Other: / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product 1 / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

  Foils of plastic, metallized / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

• EPA SADC · Afrique du Sud

  Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [23] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex–works price of the product

• EU-Singapore FTA · Singapour

  Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [21] In the case of the products composed of materials classified within both headings 3901 to 3906, and in the case of the products within headings 3907 to 3911, this restriction only applies to that group of materials which predominates by weight in the product.

• EU-Tunisia Association Agreement · Tunisie

  Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 3921110000

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Règlements de classement de l’UE pour 3921110000

Règlements de la Commission qui ont classé des marchandises précises sous ce code. Ils lient les douanes de tous les États membres pour des marchandises identiques.

• 3921 11 00 16 nov. 1988 · Règlement sur EUR-Lex

  Panneaux légers de dimensions minimales de 75 × 100 cm (30 × 40 pouces) et d'une épaisseur totale de 9,6 mm (3/8 de pouce) constitués d'une plaque de polystyrène expansé d'environ 9,5 mm d'épaisseur recouverte sur ses deux faces d'une feuille de papier ou de carton

  Motifs

  Le classement est déterminé par les dispositions des règles générales 1, 3 lettre b) et 6 ainsi que du libellé des codes NC 3921 et 3921 11 00. Le produit ne peut pas être classé dans le chapitre 48 du fait que le caractère essentiel lui est conféré par la matière plastique qui donne à l'article ses qualités physiques et notamment sa résistance, le papier ne jouant qu'un rôle secondaire.

Restrictions et signalements pour 392111

• Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XXI 3921

  Art. 3 decies, biens qui procurent des recettes importantes à la Russie

  Lire l’acte sur EUR-Lex
• Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 3921

  Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie

  Lire l’acte sur EUR-Lex

À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.

Commerce de l’UE en 2025 pour 392111

Importations extra-UE

99,4 M €

37 901 t

Exportations extra-UE

170,4 M €

Principaux pays d’origine selon la valeur importée

1. Serbie 23,4 M €
2. Chine 17,4 M €
3. Norvège 12,2 M €
4. Suisse 9,6 M €
5. Macédoine du Nord 7,6 M €

Codes NC8 sous ce code : 1. Source : Eurostat, Comext, CC BY 4.0, traité par hscode.info. Le commerce confidentiel n’est pas attribué aux codes.

Droit d’importation au Royaume-Uni pour 392111

• 6%

Droits de pays tiers de tous les codes britanniques sous cette sous-position du SH. Source : UK Department for Business and Trade, au 2 nov. 2026. Le tarif britannique diffère du tarif de l’UE.

TVA à l’importation dans l’UE

• Allemagne 19 %
• Autriche 20 %
• Belgique 21 %
• Bulgarie 20 %
• Chypre 19 %
• Croatie 25 %
• Danemark 25 %
• Espagne 21 %
• Estonie 24 % éventuellement 9 %
• Finlande 25,5 %
• France 20 %
• Grèce 24 %
• Hongrie 27 %
• Irlande 23 %
• Italie 22 %
• Lettonie 21 %
• Lituanie 21 %
• Luxembourg 17 %
• Malte 18 %
• Pays-Bas 21 %
• Pologne 23 %
• Portugal 23 %
• Roumanie 21 %
• Slovaquie 23 %
• Slovénie 22 %
• Suède 25 %
• Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Informations

Structure du HS-Code

Arborescence HS-Code