Restrictions commerciales pour l'importation de marchandises pour 7412200000 80
Les droits d’autres codes avec un compte gratuit
Vous avez consulté les droits de 10 codes aujourd’hui. Créez un compte gratuit pour voir droits, mesures et historique de tous les codes.
Règles d’origine préférentielles pour 7412200000
Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chili
EU-Algeria Association Agreement · Algérie
EU-Egypt Association Agreement · Égypte
EU-Jordan Association Agreement · Jordanie
EU-Morocco Association Agreement · Maroc
EU-Tunisia Association Agreement · Tunisie
Copper and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie
EU-Singapore FTA · Singapour
Copper and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product
EU-Korea FTA · Corée du Sud
EU-Viet Nam FTA · Viêt Nam
Copper and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product.
EU-Canada CETA · Canada
A change from any other heading.
EPA CARIFORUM
Copper and articles thereof; except for: / or: Manufacture in which: – all the materials used are classified within a heading other than that of the product; – the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya
Copper and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Japan EPA · Japon
CTH
EU-Lebanon Association Agreement · Liban
Copper and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexique
Copper and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product, the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palestine
Copper and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50% of the ex-works price of the product
Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets
Notes légales et notes explicatives pour 7412200000
Notes du chapitre 74
Note Note de sous-positions 1. Dans ce chapitre, on entend par: a) «alliages à base de cuivre-zinc (laiton)»: tout alliage de cuivre et de zinc, avec ou sans autres éléments. Lorsque d'autres éléments sont présents: — le zinc prédomine en poids sur chacun de ces autres éléments, — la teneur éventuelle en nickel est inférieure en poids à 5 % [voir alliages à base de cuivre-nickel-zinc (maillechort)], — la teneur éventuelle en étain est inférieure en poids à 3 % [voir alliages à base de cuivre-étain (bronze)]; b) «alliages à base de cuivre-étain (bronze)»: tout alliage de cuivre et d'étain, avec ou sans autres éléments. Lorsque d'autres éléments sont présents, l'étain prédomine en poids sur chacun de ces autres éléments. Toutefois, lorsque la teneur en étain est au moins de 3 % en poids, la teneur en zinc peut prédominer mais doit être inférieure à 10 % en poids; c) «alliages à base de cuivre-nickel-zinc (maillechort)»: tout alliage de cuivre, de nickel et de zinc, avec ou sans autres éléments. La teneur en nickel est égale ou supérieure en poids à 5 % [voir alliages à base de cuivre-zinc (laiton)]; d) «alliages à base de cuivre-nickel»: tout alliage de cuivre et de nickel, avec ou sans autres éléments mais, en tout état de cause, ne contenant pas plus de 1 % en poids de zinc. Lorsque d'autres éléments sont présents, le nickel prédomine en poids sur chacun de ces autres éléments.
Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex
Renseignements tarifaires du Royaume-Uni pour 7412200000
Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.
- UK 7412200000 Valable du 6 févr. 2024 au 5 févr. 2027 · Décision 600009637 sur GOV.UK
A PushFit 10mm and 12mm Euro Conus. The PushFit system is a quick, professional way to connect the supply and return pipes of the SpeeTube heating pipe to the manifold with the benefit being it encloses the heating pipe instead of squeezing it the way a compression connector does. Because the heating pipe is not constricted, there is less resistance allowing a higher rate of flow and preventing blockages. The connector is made of nickel-plated brass, the push fit (red part) is plastic and there is a black rubber ring on the opposite end. The dimensions of the Conus 10 box are 5x15x15cm with a weight of 10.92kg and the Conus12 box 15x15x15cm weighing 10.25kg
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7412 - Copper tube or pipe fittings (for example, couplings, elbows, sleeves) GIR 5 (b) has been used to identify the type of packaging used - Box GIR 6 has been used to classify the goods to subheading level 741220 - Of copper alloys Also classified in accordance with: Harmonised System Explanatory Note (HSENs) to heading 7412 and Note 3 to Section XV
- UK 7412200000 Valable du 6 févr. 2024 au 5 févr. 2027 · Décision 600009638 sur GOV.UK
The product is a push-fit connector. It is made from brass and is nickel plated. Comprising the pipe-fitting itself, the push-fit rings which are made from plastic and an 0-ring made from rubber. It functions by serving as part of an under-floor heating system supplying hot water to the necessary parts. It takes a single feed and splits it into two individual feeds. Weight per item is 204 grams
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7412 - Copper tube or pipe fittings (for example, couplings, elbows, sleeves) GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 7412 20 – of copper alloys Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) to heading – 7412
- UK 7412200000 Valable du 5 févr. 2024 au 4 févr. 2027 · Décision 600009639 sur GOV.UK
A 10mm & 12mm Reparation coupling. The system is a quick, professional way to connect the supply and return pipes of the heating pipe to the manifold. The connector encloses the heating pipe instead of squeezing it the way a compression connector does. Due to the heating pipe not being constricted, there is less resistance. The lower resistance allows a higher rate of flow and prevents blockages. The system can be connected and disconnected quickly. It can be easily removed by pressing the red plastic ring and simultaneously pulling the heating pipe out of the coupling. The system consists of a single coupling, a double (splitter) coupling and a repair coupling with plastic packaging. Product Specifications 10mm cone 1 group 3/4" 10 x 1.3 and 12mm cone 1 group 3/4" 12 x 1.5. Weight -25 and 36Gram(g) Country -NL Material - Brass with chrome finish 59-62% Copper 35.5-39% Zinc Lead 1.5-3.7%
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7412 - Copper tube or pipe fittings (for example, couplings, elbows, sleeves) GIR 5 (b) Has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 741220 - of copper alloys Also classified in accordance with:- Note 1 (b) to Chapter 74 Harmonised System Explanatory Notes (HSENs) to heading 7412
+ 1 de plus
- UK 7412200000 Valable du 6 févr. 2024 au 5 févr. 2027 · Décision 600009643 sur GOV.UK
This particular item is a 3/4" inside thread Endcap made of brass, designed for heating purposes and is resistance against corrosion. Capable of withstanding ductility at high temperatures and has low magnetic permeability, along with the ability to withstand pressure. It is highly durable and offers a prolonged lifespan. The material used is brass with a chrome finish, and it weighs 36 grams. Packaged - Box 10 x 10x12cm
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7412 - Copper tube or pipe fittings (for example, couplings, elbows, sleeves) GIR 5 (b) has been used to identify the type of packaging used - Box GIR 6 has been used to classify the goods to subheading level 741220 - Of copper alloys Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Note (HSENs) to heading 7412
Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.
Restrictions et signalements pour 74122000
- Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 7412
Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie. seulement une partie du code : Cuivre et ouvrages en cuivre, à l'exclusion de ce qui relève du code NC 7401 00 00 (dans l'annexe : chapitre 74)
Lire l’acte sur EUR-Lex
À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.
Commerce de l’UE en 2025 pour 74122000
- Importations extra-UE
- 698,7 M €
- 50 188 t
- Exportations extra-UE
- 688,3 M €
Principaux pays d’origine selon la valeur importée
Chine 426,6 M €
Turquie 74,6 M €
Suisse 53,5 M €
Norvège 42,6 M €
Royaume-Uni 27,9 M €
Chiffres du code NC8 74122000. Source : Eurostat, Comext, CC BY 4.0, traité par hscode.info. Le commerce confidentiel n’est pas attribué aux codes.
Droit d’importation au Royaume-Uni pour 741220
- 0%
Droits de pays tiers de tous les codes britanniques sous cette sous-position du SH. Source : UK Department for Business and Trade, au 2 nov. 2026. Le tarif britannique diffère du tarif de l’UE.
TVA à l’importation dans l’UE
- Allemagne 19 %
- Autriche 20 %
- Belgique 21 %
- Bulgarie 20 %
- Chypre 19 %
- Croatie 25 %
- Danemark 25 %
- Espagne 21 %
- Estonie 24 %
- Finlande 25,5 %
- France 20 %
- Grèce 24 %
- Hongrie 27 %
- Irlande 23 %
- Italie 22 %
- Lettonie 21 %
- Lituanie 21 %
- Luxembourg 17 %
- Malte 18 %
- Pays-Bas 21 %
- Pologne 23 %
- Portugal 23 %
- Roumanie 21 %
- Slovaquie 23 %
- Slovénie 22 %
- Suède 25 %
- Tchéquie 21 %
Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.
Règles d’origine
Les règles d’origine préférentielles de la sous-position 741220 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.
Règles d’origine sur Access2MarketsInformations
Lorsque vous importez ou exportez "en alliages de cuivre", il est important d'avoir le bon code SH ou code TARIC. Le code HS 7412200000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.
Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "en alliages de cuivre", veuillez noter les points suivants :
- Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "en alliages de cuivre".
- Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "en alliages de cuivre" dans le pays de destination ou l'exporter depuis le pays d'origine.
- Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
- Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
- Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.
En résumé, le code HS-Code ou le code TARIC pour "en alliages de cuivre" est 7412200000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "en alliages de cuivre".
Structure du HS-Code
1. Chapitre
Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 74 a été sélectionné pour cuivre et ouvrages en cuivre
2. Titre
Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 12 se réfère à Accessoires de tuyauterie (raccords, coudes, manchons, par exemple), en cuivre.
3. Sous-titre
Les deux derniers chiffres du code harmonisé international sont plus spécifiques et définissent des sous-catégories de produits. Dans l'exemple ci-dessus, la 20 se réfère à en alliages de cuivre.
Arborescence HS-Code
7400000000 80
Chapitre CUIVRE ET OUVRAGES EN CUIVRE
7412000000 80
Accessoires de tuyauterie (raccords, coudes, manchons, par exemple), en cuivre
7412100000 80
- en cuivre affiné
7412200000 80
- en alliages de cuivre