HS-Code 9021100000 80 Articles et appareils d'orthopédie ou...

Restrictions commerciales pour l'importation de marchandises pour 9021100000 80

Cette table contient des informations sur les restrictions commerciales pour l'importation de marchandises dans l'UE et l'UE dans les pays tiers. Le tableau contient des informations sur les les restrictions commerciales dues à des unions douanières, des préférences, des quotas tarifaires, les unions douanières, les contrôles vétérinaires, les droits de douane des pays tiers et les quotas tarifaires non préférentiels quotas.

Droits 54
	Pays d'origine	Début	Droit / Impôt	Base légale Type de mesure
1011	ERGA OMNES 1011	01-01-1999	0 %	Régulation2261/98 Droit des pays tiers 103
1011	ERGA OMNES 1011	01-07-2016	0 %	Régulation2658/87 Suspension - marchandises pour certaines catégories de navires, bateaux et autres navires et pour les plates-formes de forage ou de production 117
IQ	Iraq IQ Instruments d'optique, de photographie ou de cinématographie, ayant entre 50 et 100 ans, autres que ceux repris sous les codes additionnels 4008, 4010, 4011, 4013, 4023, 4040 - 4048	23-05-2003		Régulation1210/03 Restrictions à l'entrée en libre circulation 465
SY	Syria SY Instruments d'optique, de photographie ou de cinématographie, ayant entre 50 et 100 ans, autres que ceux repris sous les codes additionnels 4008, 4010, 4011, 4013, 4023, 4040 - 4048	29-05-2025		Régulation1332/13 Restrictions à l'entrée en libre circulation 465
SY	Syria SY Autres que ceux relevant du règlement (CE) n° 1332/2013 (JO L 335): pas de restrictions	29-05-2025		Régulation1332/13 Restrictions à l'entrée en libre circulation 465
IQ	Iraq IQ Autres que ceux relevant du règlement (CE) n° 1210/2003 (JO L 169): pas de restrictions	23-05-2003		Régulation1210/03 Restrictions à l'entrée en libre circulation 465
FO	Faroe Islands FO	01-01-1997	0 %	Décision0126/97 Préférence tarifaire 142
XL	Melilla XL	01-01-1999	0 %	Acte d'adhésion0001/85 Préférence tarifaire 142
PS	Occupied palestinian Territory PS	01-01-2001	0 %	Décision0430/97 Préférence tarifaire 142
AD	Andorra AD	01-01-2006	0 %	Décision0680/90 Droit de l'union douanière 106
TR	Türkiye TR	01-01-2006	0 %	Décision0142/96 Droit de l'union douanière 106
SM	San Marino SM	01-01-2006	0 %	Décision0245/02 Droit de l'union douanière 106
1007	EU-Switzerland agreement: re-imported goods 1007	01-01-2007	0 %	Régulation2840/72 Préférence tarifaire 142
2005	GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005	01-01-2014	0 %	Régulation0978/12 Préférence tarifaire 142
2027	GSP+ (incentive arrangement for sustainable development and good governance) 2027	01-01-2014	0 %	Régulation0978/12 Préférence tarifaire 142
MD	Moldova, Republic of MD	01-01-2016	0 %	Décision0492/14 Préférence tarifaire 142
EC	Ecuador EC	01-01-2017	0 %	Décision2369/16 Préférence tarifaire 142
GB	United Kingdom GB	01-01-2021	0 %	Décision2253/20 Préférence tarifaire 142
2080	OCTs (Overseas Countries and Territories) 2080	01-01-2021	0 %	Décision1764/21 Préférence tarifaire 142
GH	Ghana GH	01-01-2027	0 %	Décision1850/16 Préférence tarifaire 142
CL	Chile CL	01-02-2025	0 %	Décision3016/24 Préférence tarifaire 142
TN	Tunisia TN	01-03-1998	0 %	Décision0238/98 Préférence tarifaire 142
MA	Morocco MA	01-03-2000	0 %	Décision0204/00 Préférence tarifaire 142
LB	Lebanon LB	01-04-2006	0 %	Décision0356/06 Préférence tarifaire 142
JO	Jordan JO	01-05-2002	0 %	Décision0357/02 Préférence tarifaire 142
EG	Egypt EG	01-06-2004	0 %	Décision0635/04 Préférence tarifaire 142
XC	Ceuta XC	01-07-1991	0 %	Acte d'adhésion0001/85 Préférence tarifaire 142
2012	EEA - European Economic Area 2012	01-07-2007	0 %	Décision0001/94 Préférence tarifaire 142
MX	Mexico MX	01-07-2016	0 %	Décision0415/00 Préférence tarifaire 142
KE	Kenya KE	01-07-2024	0 %	Décision1647/24 Préférence tarifaire 142
US	United States US	01-07-2026	0 %	Régulation1455/26 Préférence tarifaire 142
2200	Central America 2200	01-08-2013	0 %	Décision0734/12 Préférence tarifaire 142
CO	Colombia CO	01-08-2013	0 %	Décision0735/12 Préférence tarifaire 142
VN	Viet Nam VN	01-08-2020	0 %	Décision0753/20 Préférence tarifaire 142
DZ	Algeria DZ	01-09-2005	0 %	Décision0690/05 Préférence tarifaire 142
GE	Georgia GE	01-09-2014	0 %	Décision0494/14 Préférence tarifaire 142
SY	Syria SY	01-11-1978	0 %	Régulation2216/78 Préférence tarifaire 142
1011	ERGA OMNES 1011	01-11-2026	2 EUR	Régulation2108/26 Union handling fee 800
1011	ERGA OMNES 1011	01-11-2026	3 EUR	Régulation0382/26 Low-value consignment customs duty 107
CI	Ivory Coast CI	02-12-2019	0 %	Décision0156/09 Préférence tarifaire 142
2000	Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000	03-10-2025	0 %	Décision2022/25 Préférence tarifaire 142
CM	Cameroon CM	04-08-2014	0 %	Décision0152/09 Préférence tarifaire 142
1035	SADC EPA 1035	10-10-2016	0 %	Décision1623/16 Préférence tarifaire 142
ZA	South Africa ZA	10-10-2016	0 %	Décision1623/16 Préférence tarifaire 142
AM	Armenia AM	10-10-2026 – 11-10-2028	0 %	Régulation2269/26 Préférence tarifaire 142
1034	Eastern and Southern Africa States 1034	14-05-2012	0 %	Décision0196/12 Préférence tarifaire 142
GH	Ghana GH	15-12-2016 – 31-12-2026	0 %	Décision1850/16 Préférence tarifaire 142
IL	Israel IL	16-05-2023	0 %	Décision0855/09 Préférence tarifaire 142
SB	Solomon Islands SB	17-05-2020	0 %	Décision0729/09 Préférence tarifaire 142
CH	Switzerland CH	20-12-1972	0 %	Régulation2840/72 Préférence tarifaire 142
PG	Papua New Guinea PG	20-12-2009	0 %	Décision0729/09 Préférence tarifaire 142
FJ	Fiji FJ	28-07-2014	0 %	Décision0729/09 Préférence tarifaire 142
1033	CARIFORUM 1033	29-12-2008	0 %	Décision0805/08 Préférence tarifaire 142
WS	Samoa WS	31-12-2018	0 %	Décision0729/09 Préférence tarifaire 142

Contrôles et documents 3
	Pays d'origine	Début	Droit / Impôt	Base légale Type de mesure
1011	ERGA OMNES 1011	25-06-2025	Document requis interdit sans document	Régulation0573/24 Import control of fluorinated greenhouse gases 724
UA	Ukraine UA	24-06-2026	Document requis interdit sans document	Régulation0263/22 Contrôle à l'importation 762
UA	Ukraine UA	24-06-2026	Document requis interdit sans document	Régulation0692/14 Contrôle à l'importation 760

Explication des restrictions commerciales

Erga Omnes signifie "pour tous".

Les pays tiers sont des pays qui n'appartiennent pas à l'UE.

Le SPG signifie 'Système de préférences généralisées'.

Le SPG+ signifie 'Système de préférences généralisées Plus'.

European Economic Area (EEA) signifie tous les États membres de l'UE et l'Islande, le Liechtenstein et la Norvège.

Les PTOM sont des "Pays et territoires d'outre-mer". Ils ne sont pas membres de l'UE. Plus d'informations

'CARIFORUM est une organisation régionale d'intégration économique comprenant 15 États membres de la Communauté des Caraïbes (CARICOM) et la République dominicaine.'

'L'APE SADC signifie "Southern African Development Community - Economic Partnership Agreement" (Accord de partenariat économique).'

Droit signifie "droit de douane".

Estimer le coût d’importation pour 902110

Valeur en douane Devise

Pays d’origine Importé en Avec preuve d’origine préférentielle (0 %) Vendu en ligne à un acheteur dans l’UE (vente à distance)

Valeur en douane 1 000,00 €
Droit de douane 0 % 0,00 €
TVA à l’importation 20 % 200,00 €
Total 1 200,00 €

Peut être inférieur sous conditions :

Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms: 0 %

Documents et contrôles pour États-Unis

Import control of fluorinated greenhouse gases: Document requis, interdit sans document Y152 Y986 Y160 Y169 Y123 Y054 Y163 Y121

Simple estimation. La valeur en douane est le prix incluant le transport et l’assurance jusqu’à la frontière de l’UE. Les accises, autres redevances et droits antidumping propres à un producteur ne sont pas inclus. Les taux préférentiels exigent une preuve d’origine valable. Groupes de pays et exclusions : TARIC, au novembre 2026.

Mesures à l’exportation pour 9021100000

Ce qui s’applique quand ces marchandises quittent l’UE : contrôles à l’exportation, autorisations (biens à double usage et autres), interdictions par destination et unité supplémentaire de la déclaration d’exportation.

Mesures 2
	Destination	Début	Droit / Impôt	Base légale Type de mesure
1008	All third countries 1008 Instruments d'optique, de photographie ou de cinématographie, ayant entre 50 et 100 ans, autres que ceux repris sous les codes additionnels 4008, 4010, 4011, 4013, 4023, 4040 - 4048	01-01-2007		Régulation1210/03 Restriction on export 467
1008	All third countries 1008 Autres que ceux relevant du règlement (CE) n° 1210/2003 (JO L 169): pas de restrictions	01-01-2007		Régulation1210/03 Restriction on export 467

Contrôles et documents 3
	Destination	Début	Droit / Impôt	Base légale Type de mesure
1008	All third countries 1008	12-03-2025	Document requis interdit sans document	Régulation0573/24 Export control of fluorinated greenhouse gases 765
1008	All third countries 1008	15-12-2013	Document requis interdit sans document	Régulation1332/13 Export authorization 473
IR	Iran, Islamic Republic of IR	31-01-2026	Document requis interdit sans document	Régulation1529/23 Export control 767

Historique

Taux de droit et mesures pour ce code dans le temps (versions annuelles).

Règles d’origine préférentielles pour 9021100000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chili
EU-Algeria Association Agreement · Algérie
EU-Egypt Association Agreement · Égypte
EU-Jordan Association Agreement · Jordanie
EU-Morocco Association Agreement · Maroc
EU-Tunisia Association Agreement · Tunisie

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
EU-Canada CETA · Canada

A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product.
EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product
EPA CARIFORUM

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for: / or: Manufacture in which: – all the materials used are classified within a heading other than that of the product; – the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU-Japan EPA · Japon

CTH except from heading 96.20; MaxNOM 50 % (EXW); or RVC 55 % (FOB).
EU-Korea FTA · Corée du Sud

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 45 % of the ex-works price of the product
EU-Lebanon Association Agreement · Liban

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexique

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product, the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palestine

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 40% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
EU-Singapore FTA · Singapour

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
EU-Viet Nam FTA · Viêt Nam

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: / or: Manufacture from materials of any heading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70% of the ex-works price of the product.

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 9021100000

9021 Notes explicatives de la nomenclature combinée: Articles et appareils d'orthopédie, y compris les ceintures et bandages médico-chirurgicaux et les béquilles; attelles, gouttières et autres articles et appareils pour fractures; articles et appareils de prothèse; appareils pour faciliter l'audition aux sourds et autres appareils à tenir à la main, à porter sur la personne ou à implanter dans l'organisme, afin de compenser une déficience ou une infirmité

Au sens de cette position, on entend par «compenser une déficience ou une infirmité» uniquement des appareils qui reprennent ou remplacent vraiment la fonction de la partie du corps déficiente ou infirme. Sont toutefois exclus de la présente position les appareils qui servent uniquement à atténuer les effets d'une déficience ou d'une infirmité. Sont aussi exclus de cette position les appareils identifiafles de stomie (sous-position 3006 91 00).

9021 10 10 Notes explicatives de la nomenclature combinée: Articles et appareils d’orthopédie

Voir la note explicative relative à la note complémentaire 2 du chapitre 90.

Notes du chapitre 90

Notes 1. Le présent chapitre ne comprend pas: a) les articles à usages techniques, en caoutchouc vulcanisé, non durci (no 4016), en cuir naturel ou reconstitué (no 4205), en matières textiles (no 5911); b) les ceintures et bandages en matières textiles, dont l'effet recherché sur l'organe à soutenir ou maintenir est uniquement fonction de l'élasticité (ceintures de grossesse, bandages thoraciques, bandages abdominaux, bandages pour les articulations ou les muscles, par exemple) (section XI); c) les produits réfractaires du no 6903; les articles pour usages chimiques ou autres usages techniques, du no 6909; d) les miroirs en verre, non travaillés optiquement, du no 7009 et les miroirs en métaux communs ou en métaux précieux, n'ayant pas le caractère d'éléments d'optique (no 8306 ou chapitre 71); e) les articles en verre des nos 7007, 7008, 7011, 7014, 7015 ou 7017; f) les parties et fournitures d’emploi général, au sens de la note 2 de la section XV, en métaux communs (section XV) et les articles similaires en matières plastiques (chapitre 39); relèvent toutefois du no 9021 les articles spécialement conçus pour être utilisés exclusivement comme implants pour la médecine, la chirurgie, l’art dentaire ou l’art vétérinaire. g) les pompes distributrices comportant un dispositif mesureur, du no 8413; les bascules et balances à vérifier et compter les pièces usinées, ainsi que les poids à peser présentés isolément (no 8423); les appareils de levage ou de manutention (nos 8425 à 8428); les coupeuses de tous types pour le travail du papier ou du carton (no 8441); les dispositifs spéciaux pour le réglage de la pièce à travailler ou de l'outil sur les machines-outils ou machines à découper par jet d’eau, même munis de dispositifs optiques de lecture (diviseurs dits «optiques», par exemple), du no 8466 (autres que les dispositifs purement optiques: lunettes de centrage, d'alignement, par exemple); les machines à calculer (no 8470); les détendeurs, vannes et autres articles de robinetterie (no 8481); machines et appareils du no 8486, y compris les appareils pour la projection ou la réalisation des tracés de circuits sur les surfaces sensibilisées des matériaux semi-conducteurs; h) les projecteurs d'éclairage des types utilisés pour cycles ou automobiles (no 8512); les lampes électriques portatives du no 8513; les appareils cinématographiques d'enregistrement ou de reproduction du son ainsi que les appareils pour la reproduction en série de supports de son (no 8519); les lecteurs de son (no 8522), les caméras de télévision, les appareils photographiques numériques et les caméscopes (no 8525); les appareils de radiodétection et de radiosondage, les appareils de radionavigation et les appareils de radiotélécommande (no 8526); les connecteurs de fibres optiques, faisceaux ou câbles de fibres optiques (no 8536); les appareils de commande numérique du no 8537; les articles dits «phares et projecteurs scellés» du no 8539; les câbles de fibres optiques du no 8544; ij) les projecteurs du no 9405; k) les articles du chapitre 95; l) les monopodes, les bipieds, les trépieds et articles similaires, du n° 9620; m) les mesures de capacité, qui sont classées avec les ouvrages de la matière constitutive; n) les bobines et supports similaires (classement d'après la matière constitutive: no 3923, section XV, par exemple). 2. Sous réserve des dispositions de la note 1 ci-dessus, les parties et accessoires pour machines, appareils, instruments ou articles du présent chapitre sont classés conformément aux règles ci-après: a) les parties et accessoires consistant en articles compris dans l'une quelconque des positions du présent chapitre ou des chapitres 84, 85 ou 91 (autres que les nos 8487, 8548 ou 9033) relèvent de ladite position quels que soient les machines, appareils ou instruments auxquels ils sont destinés; b) lorsqu'ils sont reconnaissables comme exclusivement ou principalement destinés à une machine, un instrument ou un appareil particuliers ou à plusieurs machines, instruments ou appareils d'une même position (même des nos 9010, 9013 ou 9031), les parties et accessoires, autres que ceux visés au paragraphe précédent, sont classés dans la position afférente à cette ou ces machines, instruments ou appareils; c) les autres parties et accessoires relèvent du no 9033. 3. Les dispositions des notes 3 et 4 de la section XVI s'appliquent également au présent chapitre. 4. Le no 9005 ne couvre pas les lunettes de visée pour armes, les périscopes pour sous-marins ou chars de combat ni les lunettes pour machines, appareils ou instruments du présent chapitre ou de la section XVI (no 9013). 5. Les machines, appareils et instruments optiques de mesure ou de contrôle, susceptibles de relever à la fois du no 9013 et du no 9031, sont classés dans cette dernière position. 6. Au sens du no 9021, on considère comme «articles et appareils orthopédiques» les articles et appareils servant: — soit à prévenir ou à corriger certaines difformités corporelles, — soit à soutenir ou à maintenir des parties du corps à la suite d'une maladie, d'une opération ou d'une blessure. Les articles et appareils orthopédiques comprennent les chaussures orthopédiques ainsi que les semelles intérieures spéciales, conçues en vue de corriger les affections orthopédiques du pied, pour autant qu'elles soient 1o) fabriquées sur mesure ou 2o) fabriquées en série, présentées par unités et non par paires et conçues pour s'adapter indifféremment à chaque pied. 7. Le no 9032 comprend uniquement: a) les instruments et appareils pour la régulation du débit, du niveau, de la pression ou d'autres caractéristiques des fluides gazeux ou liquides, ou pour le contrôle automatique des températures, même si leur fonctionnement a son principe dans un phénomène électrique variable avec le facteur recherché, et qui ont pour fonction d'amener ce facteur à une valeur prescrite et de l'y maintenir sans être influencés par d'éventuelles perturbations, grâce à une mesure continue ou périodique de sa valeur réelle; b) les régulateurs automatiques de grandeurs électriques, ainsi que les régulateurs automatiques d'autres grandeurs dont l'opération a son principe dans un phénomène électrique variable avec le facteur à régler, et qui ont pour fonction d'amener ce facteur à une valeur prescrite et de l'y maintenir sans être influencés par d'éventuelles perturbations, grâce à une mesure continue ou périodique de sa valeur réelle. Notes complémentaires 1. On entend par «électroniques», au sens des sous-positions 9015 30 10, 9025 80 40, 9026 10 21, 9026 10 29, 9026 20 20, 9026 80 20, 9027 10 10 et 9032 10 20, les instruments et appareils comportant un ou plusieurs articles relevant des nos 8540, 8541 ou 8542. Toutefois, ne sont pas pris en considération, pour l'application de cette disposition, les articles des nos 8540, 8541 ou 8542 ayant uniquement la fonction de redresseur de courant ou qui ne sont présents que dans la partie alimentation de ces instruments ou appareils. 2. Aux fins de la sous-position 9021 10 10, on entend par «articles et appareils d’orthopédie» les articles et appareils qui sont spécialement conçus pour une fonction orthopédique déterminée, par opposition aux produits qui pourraient être utilisés à des fins diverses (par exemple, les produits pour les articulations, ligaments ou tendons sursollicités par les activités sportives ou la dactylographie, ainsi que les produits qui servent uniquement à atténuer la douleur de la partie du corps déficiente ou infirme causée, par exemple, par une réaction inflammatoire). Les «articles et appareils d’orthopédie» doivent empêcher complètement un mouvement spécifique de la partie du corps déficiente ou infirme (par exemple, des articulations, ligaments ou tendons) afin de prévenir d’autres blessures ou difformités corporelles ou une aggravation de ces blessures ou difformités, à la différence d’autres produits qui ne peuvent pas empêcher des mouvements spécifiques, mais qui préviennent les mouvements réflexes (mouvements involontaires) en raison de leur rigidité relative due à la présence, par exemple, de gouttières souples, pelotes de compression, d’une matière textile non élastique ou de sangles de contention de type «velcro».

Notes de la section XVIII

INSTRUMENTS ET APPAREILS D'OPTIQUE, DE PHOTOGRAPHIE OU DE CINÉMATOGRAPHIE, DE MESURE, DE CONTRÔLE OU DE PRÉCISION; INSTRUMENTS ET APPAREILS MÉDICO-CHIRURGICAUX; HORLOGERIE; INSTRUMENTS DE MUSIQUE; PARTIES ET ACCESSOIRES DE CES INSTRUMENTS OU APPAREILS

Autres notes explicatives du chapitre

Note complémentaire 2 Voir également la note 6 du chapitre 90 et l’arrêt dans les affaires jointes C-260/00 à C-263/00, Lohmann GmbH & Co. KG et Medi Bayreuth Weihermüller & Voigtmann GmbH & Co. KG contre Oberfinanzdirektion Koblenz, points 36, 37, 39, 40, 43 et 45 (ECLI:EU:C:2002:637). Exemples de produits relevant de la sous-position 9021 10 10: Exemples de produits relevant de la section XI:

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Règlements de classement de l’UE pour 9021100000

Règlements de la Commission qui ont classé des marchandises précises sous ce code. Ils lient les douanes de tous les États membres pour des marchandises identiques.

9021 10 10 16 nov. 2011 · Règlement sur EUR-Lex

Un produit consistant en un collier en matière plastique qui épouse la forme du cou et qui comprend une couche de mousse amortissant les chocs et des fermetures velcro (dénommé «collier cervical»).

Il sert à soutenir le rachis cervical (cou) et la tête d'une personne, par exemple, au moment du sauvetage et du transport de patients présentant des lésions suspectées ou connues de la moelle épinière, ou à soutenir le cou d'une personne qui a subi un traumatisme cervical du type «coup du lapin».

Motifs

Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée, par la note 6 du chapitre 90 et par le libellé des codes NC 9021 , 9021 10 et 9021 10 10 . Le collier est considéré comme un appareil permettant de soutenir ou de maintenir des parties du corps à la suite d'une maladie, d'une opération ou d'une blessure au sens de la note 6 du chapitre 90. Le produit ne peut être considéré comme un article ou appareil pour fractures puisqu'il n'est pas utilisé pour immobiliser une partie du corps à la suite d'une fracture. Un classement sous le code NC 9021 10 90 est donc exclu. Le produit doit donc être classé sous le code NC 9021 10 10 en tant qu'appareil d'orthopédie.
9021 10 90 8 sept. 2022 · Règlement sur EUR-Lex

Système de fixation de la colonne vertébrale en kit, comprenant entre autres des vis, des barres, des plaques, des crochets, des connecteurs latéraux à implanter dans le corps humain pour différents traitements médicaux.

En fonction du diagnostic médical (fracture, déformation, etc., de la colonne vertébrale), diverses parties de l’article peuvent être assemblées pour former un système de fixation de la colonne vertébrale (c’est-à-dire un implant) au cours d’une opération. L’implant permet de joindre et de soutenir les vertèbres après une fracture, par exemple, ou de réaligner les vertèbres en cas de scoliose, par exemple, ou de maintenir les vertèbres en position et de les soutenir en cas de maladies dégénératives des disques, par exemple. L’article peut être utilisé indifféremment pour chacun de ces traitements médicaux. (Voir l’illustration d’un produit assemblé) (*1)

Motifs

Le classement est déterminé par les règles générales (RGI) 1, 2 a), 3 c) et 6 pour l’interprétation de la nomenclature combinée, par la note 6 du chapitre 90 de la nomenclature combinée et par le libellé des codes 9021 , 9021 10 , 9021 10 10 et 9021 10 90 de la NC. L’article non assemblé présente les caractéristiques essentielles de l’article fini au sens de la RGI 2 a). L’article fini est un appareil (un système de fixation de la colonne vertébrale) qui, lorsqu’il est implanté dans le corps humain, permet de joindre les vertèbres ou de maintenir ou remettre celles-ci en position. Selon la fonction effective que l’article exerce en définitive à l’intérieur du corps, il s’agit soit d’un appareil pour fractures (du code NC 9021 10 90 ) soit d’un appareil orthopédique (du code NC 9021 10 10 ). Dans le cadre de sa fonction en tant qu’appareil orthopédique, il prévient ou corrige certaines difformités corporelles (en cas de scoliose, par exemple) ou il soutient ou maintient des parties du corps (en cas de maladie dégénérative des disques, par exemple) au sens de la note 6 du chapitre 90. Un classement sous le code NC 9021 90 90 est exclu puisque le produit est couvert par des positions plus précises. Lors de l’importation, on ne connaît ni l’utilisation effective ni la destination de l’article, à savoir s’il sera utilisé en tant qu’appareil pour fractures ou appareil orthopédique. La destination de l’article n’est pas inhérente à celui-ci, car il est impossible de déterminer à partir de ses caractéristiques objectives et propriétés s’il est destiné à servir d’appareil pour fractures ou d’appareil orthopédique, étant donné qu’il peut être utilisé indifféremment pour ces deux finalités. Par conséquent, lors de l’importation, la fonction principale de l’article au sens de la note 3 du chapitre 90 et de la note 3 de la section XVI n’est pas connue ni ne peut être déterminée à partir de ses caractéristiques objectives et propriétés. Il convient dès lors de classer l’article dans la position placée la dernière par ordre de numérotation parmi celles susceptibles d’être valablement prises en considération conformément aux RGI 3 c) et 6. L’article doit donc être classé sous le code NC 9021 10 90 en tant qu’attelles, gouttières et autres articles et appareils pour fractures.
9021 10 90 11 nov. 2014 · Règlement sur EUR-Lex

Un produit canulé, de forme cylindrique, filetée, en alliage de titane extra dur, d'une longueur comprise entre 20 et 56 mm.

Le produit comporte une tige canulée d'un diamètre extérieur de 4 mm ainsi qu'une tête à empreinte hexagonale. La tige est entièrement filetée d'un pas de 2 mm. Le produit correspond à la norme ISO/TC 150 pour les vis d'implants et est destiné à être utilisé dans le domaine de la traumatologie pour réduire les fractures. Il doit être placé dans le corps au moyen d'instruments spécifiques et d'un fil-guide, qui doit être inséré dans la tige canulée et qui permet un placement précis par une petite incision dans le corps. Lors de l'importation, l'article est présenté dans un emballage stérilisé. Le produit est numéroté, et sa traçabilité est donc assurée tout au long de la production et de la distribution.

Motifs

Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée et par le libellé des codes NC 9021 , 9021 10 et 9021 10 90 . En raison de ses caractéristiques objectives, à savoir la présence de la tige canulée, le produit ne correspond pas totalement à une vis en métaux communs. Par conséquent, il ne peut pas être considéré comme une partie et fourniture d'emploi général (vis) au sens de la note 2 de la section XV. Par conséquent, le classement dans la position 8108 est exclu. Il convient donc de classer le produit sous le code NC 9021 10 90 en tant qu'article ou appareil pour fractures.

+ 1 de plus

9021 10 90 11 nov. 2014 · Règlement sur EUR-Lex

Un produit résistant, de forme cylindrique, fileté (dénommé «vis double cœur de pangée» «pangea dual core screw») en alliage de titane extra dur, d'une longueur comprise entre 20 et 45 mm.

La tige est entièrement filetée avec un filetage double cœur comportant une zone de transition pour la modification du diamètre du cœur. Elle a un diamètre extérieur constant de 4,0 mm, est de type autotaraudeuse, et comporte une extrémité filetée épointée. Le produit présente une tête polyaxiale (mobile), en forme de U, à filetage interne, qui permet une rotation de 25° autour de son axe pour son ajustement. Le produit comporte une encoche spéciale dans le capuchon de verrouillage pour fixer une tige (présentée séparément) sur sa tête. Le produit correspond à la norme ISO/TC 150 pour les vis d'implants et est destiné à être utilisé dans le domaine de la traumatologie, en tant qu'élément d'un système de stabilisation postérieure de la colonne vertébrale. Il est placé au moyen d'instruments spécifiques. Lors de l'importation, l'article n'est pas présenté dans un emballage stérilisé. Le produit est numéroté et sa traçabilité est donc assurée tout au long de la production et de la distribution. (*1) Voir l'image.

Motifs

Le classement est déterminé par les dispositions des règles générales 1 et 6 pour l'interprétation de la nomenclature combinée, par la note 2 b) du chapitre 90 et par le libellé des codes NC 9021 , 9021 10 et 9021 10 90 . En raison de ses caractéristiques objectives, à savoir la présence de la tête polyaxiale en forme de U avec capuchon de verrouillage, le produit ne correspond pas totalement à une vis en métaux communs. Par conséquent, il ne peut pas être considéré comme une partie ou fourniture d'emploi général (vis) au sens de la note 2 de la section XV. Par conséquent, le classement dans la position 8108 est exclu. Il convient donc de classer le produit sous le code NC 9021 10 90 en tant qu'article ou appareil pour fractures.

Renseignements tarifaires du Royaume-Uni pour 9021100000

Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.

UK 9021101000 Valable du 17 juin 2024 au 16 juin 2027 · Décision 600010708 sur GOV.UK

The 2462 Rollator Model has a lightweight aluminium frame with adjustable handles. It also has comfortable ergonomic grips. The solid wheels are 15cm in size with swivel front castors for manoeuvrability and this model can be used indoor and patio use. Also comes with a padded seat with removable backrest and it is supplied with a shopping bag. The seat measurements are: - H 55cm, W31cm, D 32cm Available in 3 colours, Red, Green and Blue with a Metallic finish Model 2462 Specifications: - Depth 60cm Width 60 cm Height 81-92cm Weight 6.5kg Maximum User Weight 120kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …
UK 9021101000 Valable du 17 juin 2024 au 16 juin 2027 · Décision 600010709 sur GOV.UK

The 2463 Rollator Model has a lightweight aluminium frame with adjustable handles. It also has comfortable ergonomic grips. The solid wheels ar20cm in size with swivel front castors for manoeuvrability Also comes with a padded seat with removable backrest and it is supplied with a shopping bag. The seat measurements are: - H 55cm, W31cm, D 32cm Available in 3 colours, Red, Green, and Blue with a Metallic finish Model 2463 Specifications: - Depth 64cm Width 63 cm Height 81-92cm Weight 7kg Maximum User Weight 120kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …
UK 9021101000 Valable du 17 juin 2024 au 16 juin 2027 · Décision 600010710 sur GOV.UK

The 2467 Rollator Model has a Heavy-duty aluminium frame. Also has locking loop brakes. The solid wheels are 20cm in size with swivel front castors for manoeuvrability It can fold flat for storage and transportation and has a removable backrest and it is supplied with a shopping bag. The seat measurements are: - H 53cm Model 2467 Specifications: - Depth 71cm Width 67 cm Height 78-91cm Weight 16kg Maximum User Weight 182kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …

+ 21 de plus

UK 9021101000 Valable du 17 juin 2024 au 16 juin 2027 · Décision 600010711 sur GOV.UK

The 2470 Rollator Model has a lightweight aluminium frame with adjustable height handles with lockable loop brakes. It also has comfortable ergonomic hand grips. The solid wheels are 20cm in size with swivel front castors for manoeuvrability. Also comes with a padded seat with curved backrest that can be removed. The 2470 Rollator Model Specifications: - Depth 60cm Width 60 cm Height 76-81cm Weight 7.9kg Maximum User Weight 127kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …
UK 9021101000 Valable du 17 juin 2024 au 16 juin 2027 · Décision 600010712 sur GOV.UK

The 2340 Rollator Model has a lightweight aluminium frame with adjustable height handles with lockable loop brakes. It also has comfortable ergonomic hand grips. The solid wheels are 20cm in size with swivel front castors for manoeuvrability and this model can be folded for storage and transportation. Also comes supplied with a black vinyl bag. The 2340 Rollator Specifications: - Depth 59cm Width 64cm Height 86-99cm Weight 4kg Maximum User Weight 127kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …
UK 9021101000 Valable du 17 juin 2024 au 16 juin 2027 · Décision 600010713 sur GOV.UK

The 2320 Tri- Wheel Rollator Model has a frame with adjustable handles. It also has comfortable ergonomic grips and Lockable loop brakes. The solid wheels are 20cm in size with swivel front castors for manoeuvrability and this model can be folded for storage and transportation. Supplied with black vinyl bag Available in Chrome, Red, and Blue with a epoxy coated finish. Model 2320 Specifications: - Depth 60cm Width 66 cm Height 86-99cm Weight 5kg Maximum User Weight 127kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …
UK 9021101000 Valable du 17 juin 2024 au 16 juin 2027 · Décision 600010714 sur GOV.UK

The 2330 Tri- Wheel Rollator Model has a frame with pressure brakes and adjustable handles. It also has comfortable ergonomic grips and Lockable loop brakes. The solid wheels are 20cm in size with swivel front castors for manoeuvrability and this model can be folded for storage and transportation. Supplied with black vinyl bag Available in Chrome Model 2330 Specifications: - Depth 58cm Width 66 cm Height 86-99cm Weight 5.7kg Maximum User Weight 127kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …
UK 9021101000 Valable du 17 juin 2024 au 16 juin 2027 · Décision 600010715 sur GOV.UK

The 2011 Rollator come with or without wheels. The Wheeled model has a light aluminium frame and is height adjustable from 64-71cm. Also comes with comfortable plastic moulded hand grips. The non wheeled model has a lightweight aluminium frame and is height adjustable from 64-71cm. It is also fitted with non-slip, non-marking rubber tips of the feet of the frame and also come with comfortable plastic moulded hand grip. Specifications for the both models are as follows: - Depth – 58cm Width – 56cm Height – 64-71cm Weight – 2.5kg Max User Weight – 160kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …
UK 9021101000 Valable du 17 juin 2024 au 16 juin 2027 · Décision 600010716 sur GOV.UK

The 2012 Rollator come with or without wheels. The Wheeled model has a light aluminium frame and is height adjustable from 74-82cm. Also comes with comfortable plastic moulded hand grips. The non wheeled model has a lightweight aluminium frame and is height adjustable from 74-82cm. It is also fitted with non-slip, non-marking rubber tips of the feet of the frame and also come with comfortable plastic moulded hand grip. Specifications for the both models are as follows: - Depth – 58cm Width – 56cm Height – 74-82cm Weight – 2.5kg Max User Weight – 160kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …
UK 9021101000 Valable du 17 juin 2024 au 16 juin 2027 · Décision 600010717 sur GOV.UK

The 2013 Rollator come with or without wheels. The Wheeled model has a light aluminium frame and is height adjustable from 84-92cm. Also comes with comfortable plastic moulded hand grips. The non wheeled model has a lightweight aluminium frame and is height adjustable from 84-92cm. It is also fitted with non-slip, non-marking rubber tips of the feet of the frame and also come with comfortable plastic moulded hand grip. Specifications for the both models are as follows: - Depth – 58cm Width – 56cm Height – 84-92cm Weight – 2.5kg Max User Weight – 160kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …
UK 9021101000 Valable du 17 juin 2024 au 16 juin 2027 · Décision 600010718 sur GOV.UK

The 2111 Rollator come with or without wheels. The Wheeled model has a light aluminium frame and is height adjustable from 64-71cm. Also comes with comfortable plastic moulded hand grips. The non wheeled model has a lightweight aluminium frame and is height adjustable from 64-71cm. It is also fitted with non-slip, non-marking rubber tips of the feet of the frame and also come with comfortable plastic moulded hand grip. Specifications for the both models are as follows: - Depth – 59cm Width – 63cm Height – 64-71cm Weight – 2kg Max User Weight – 160kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …
UK 9021101000 Valable du 18 juin 2024 au 17 juin 2027 · Décision 600010719 sur GOV.UK

The 2112 Rollator come with or without wheels. The Wheeled model has a light aluminium frame and is height adjustable from 74-82cm. Also comes with comfortable plastic moulded hand grips. The non wheeled model has a lightweight aluminium frame and is height adjustable from 74-82cm. It is also fitted with non-slip, non-marking rubber tips of the feet of the frame and also come with comfortable plastic moulded hand grip. Specifications for the both models are as follows: - Depth – 59cm Width – 63cm Height – 74-82cm Weight – 2kg Max User Weight – 160kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …
UK 9021101000 Valable du 18 juin 2024 au 17 juin 2027 · Décision 600010720 sur GOV.UK

The 2113 Rollator come with or without wheels. The Wheeled model has a light aluminium frame and is height adjustable from 84-92cm. Also comes with comfortable plastic moulded hand grips. The non wheeled model has a lightweight aluminium frame and is height adjustable from 84-92cm. It is also fitted with non-slip, non-marking rubber tips of the feet of the frame and also come with comfortable plastic moulded hand grip. Specifications for the both models are as follows: - Depth – 59cm Width – 63cm Height – 84-92cm Weight – 2kg Max User Weight – 160kg

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: General Note 6 to Chapter 90 Harmonised system explanatory notes (HSENs) to Heading …
UK 9021101000 Valable du 1 août 2024 au 31 juil. 2027 · Décision 600010894 sur GOV.UK

The Relief Dual Shoe is the single product which is subject of this application They are not made to measure, but they are mass produced, are not in pairs but presented singly and designed to fit either foot equally The Relief Dual® Off-loading Shoe, which does not have a plateau in the forefoot region, provides stability and reduces pressure on the foot following foot surgery. Broad hook and loop fastener across the instep > Strap loops on both sides > Hook and loop fastener can be cut to length > Removable sole > Stable heel cap for improved rearfoot stability > Available in 7 sizes > Soft lining> Space for inserts through the removable sole (also diabetes-compliant foot bed) > Low profile height – no height adjustment necessary> Slip-resistant rubber sole > Improved shock absorption particularly in the heel and ball area

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also classified in accordance with: Chapter 90 Note 6 Harmonised system explanatory notes (HSENs) (I) (6 to Heading 9021
UK 9021101000 Valable du 19 déc. 2024 au 18 déc. 2027 · Décision 600012075 sur GOV.UK

The SDO (Sensory Dynamic Orthosis) orthoses are made to measure and fully bespoke class 1 medical devices. These products are only available on the prescription of a qualified orthotist, neuro-physio or physiotherapist. They are designed and manufactured according to the needs of each individual patient and to address very specific medical conditions. The SDO orthoses both support the body in a fixed predetermined position and through the proprioceptive feedback have a carryover effect for muscle memory. Expansion zippers are typically also incorporated into the orthoses. These can be opened to relieve the tension for periods when the patient becomes fatigued and needs to rest from the correction enforced by the orthosis. The combination of proprioception from the base fabric, tension forces to realign the body from the panels under a calculated compression at specific points within the orthoses, are fundamental to the performance of SDO. The orthoses are used to support improvements in posture and stability, and to allow normalisation of postural tone, motor output, dynamic function of movement, fluency of movement, reduced involuntary movements, normalisation of tone. They are used to manage neurological conditions including cerebral palsy, acquired brain injury, acquired spinal injury, cerebellar ataxia, spina bifida, multiple sclerosis, stroke, Parkinson's, and Ehlers-Danlos Syndrome to name a few examples. They are used extensively in spinal muscular atrophy and muscular dystrophies such as Duchenne’s, as well as other neurodegenerative diseases to provide correction of the spine where scoliosis is present. The orthoses are not adjustable. Garments are packaged in a simple plastic sealed bag.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 5 (b) - has been used to identify the type of packaging -Garments are packaged in a simple plastic sealed bag. GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also …
UK 9021101000 Valable du 19 déc. 2024 au 18 déc. 2027 · Décision 600012076 sur GOV.UK

The SDO (Sensory Dynamic Orthosis) orthoses with Steels are made to measure and fully bespoke class 1 medical devices. These products are only available on the prescription of a qualified orthotist, neuro-physio or physiotherapist. They are designed and manufactured according to the needs of each individual patient and to address very specific medical conditions. The SDO orthoses both support the body in a fixed predetermined position and through the proprioceptive feedback have a carryover effect for muscle memory. Expansion zippers are typically also incorporated into the orthoses. These can be opened to relieve the tension for periods when the patient becomes fatigued and needs to rest from the correction enforced by the orthosis. The combination of proprioception from the base fabric, tension forces to realign the body from the panels under a calculated compression at specific points within the orthoses, are fundamental to the performance of SDO. The orthoses are used to support improvements in posture and stability, and to allow normalisation of postural tone, motor output, dynamic function of movement, fluency of movement, reduced involuntary movements, normalisation of tone. They are used to manage neurological conditions including cerebral palsy, acquired brain injury, acquired spinal injury, cerebellar ataxia, spina bifida, multiple sclerosis, stroke, Parkinson's, and Ehlers-Danlos Syndrome to name a few examples. They are used extensively in spinal muscular atrophy and muscular dystrophies such as Duchenne’s, as well as other neurodegenerative diseases to provide correction of the spine where scoliosis is present. Orthoses are supplied as standard with one or two flexi steels. The benefit of the steels is to provide an opportunity to deactivate muscles and allow the steels to literally take over and enable the patient to rest. The flexible steels or boning are incorporated into a fabric casing within the garment to provide additional support. The steels are removable for laundering. There are two types of steels. Type 1. Solid flexi steel which has been powder coated A) Steel thickness 0.8mm Steel width 11.0mm Lengths 10, 11, 13, 15, 17.5, 20, 23, 25, 28, 30, 33, 35, 38, 40cm B) Steel thickness 0.8mm Steel width 22.0mm Lengths 48.2, 26.5, 24.2 cm Type 2. Spiral stainless boning. Wire thickness 0.9mm Width 9.8mm Thickness 1.55mm Lengths 7, 10, 13, 15, 18, 21, 23, 25, 28, 31, 33, 36cm. One or two steels are included as standard specific to the orthosis type. The orthoses are not adjustable. Garments are packaged in a simple plastic sealed bag.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 5 (b) - has been used to identify the type of packaging -Garments are packaged in a simple plastic sealed bag. GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8 Digit Code - 90211010 - Orthopaedic appliances Also …
UK 9021101000 Valable du 26 juin 2025 au 25 juin 2028 · Décision 600013343 sur GOV.UK

A medical orthopaedic appliance. The silver splints are orthopaedic products which help support and/or stabilize joints, for fingers, thumbs, hands, wrists and elbows to reduce pain or prevent deformity. They are effective for different types of issues (diseases, disorders and injuries.) Each splint is custom made, for one specific patient, in the exact measurements for this patient, ensuring a perfect fit for a long-term orthopaedic solution. The purpose of the product is Patient Care to also provide rest and stability. The splints are hand-made in the company's production facility. The device is made of sterling silver: 925 parts of silver and 75 parts of copper. The products are packaged in a linen bag, with a label indicating for which patient this product is. Within the package is also a Declaration of Conformity (MDR 2017) and an Instruction for Use. The company complies with MDR 2017 and has an ISO 13485 certificate.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability. GIR 5 (a) - Has been used to identify the type of packaging - The products are packaged in a linen bag, with a label indicating for which patient this product is. GIR 6 - Has been used to classify this product by the terms of heading 9021 10 - Orthopaedic or fracture appliances. Digit Code: 902110 10 - Orthopaedic …
UK 9021101000 Valable du 24 nov. 2025 au 23 nov. 2028 · Décision 600014232 sur GOV.UK

Made-to-measure shoes designed for individual with physical abnormalities that preclude wearing normal 'off the shelf' footwear. Upper: Full grain calf. Vamp lining: Orthopaedic calf 0.7mm thick. Quarter lining: Calf 1.1mm. Insole: Oak bark tanned calf with 2.4mm Poron (performance) cushioning at 5th metatarsal base. Shank: Oak bark tanned leather Forepart filler (under insole): Natural cork Outsole: Vibram 9105 Gloxi Flexi sole. Finger pull: Nylon Made to measure. Detailed measurements of feet taken then bespoke lasts and patterns created in house. Heel to ball, tread line, arch shape and foot shape / instep shape / perimeter of foot shape and all measurements unique to each foot (left and right are unique). Customised asymmetrical topline heights based on individual wearer’s ankle heights, which provides maximum support without interfering with ankle bones. Leather heel stiffener moulded to shape of heel and tendon, for comfort and eliminate heel slippage. Extended length and extra strength leather side stiffeners, for support and address over-pronation. Large toe box to accommodate hammer toes and straight position of great toe. Shoes pitched neutrally, to ensure correct postural alignment and weight distribution. Oak bark tanned leather used for insole and structural stiffeners and mid soles is blocked to shape of last and correctly moulded to the individual foot shape. This material is also breathable, and antimicrobial, and allows slight additional moulding after a short period of wear, to increase comfort and support. Insole arch support is in itself an inbuilt custom orthotic. Foam-based lightweight rubber sole for flexibility, with optimal shock absorption. Countersunk heel base that reflects the customer’s actual heel shape. Countersunk 1st metatarsal head. Heel finger pulls in nylon to aid putting on shoes, for customer with impaired flexibility. Other specific features: Left foot: Larger foot length and metatarsal head position. Higher arch. Right foot: Greater curvature of foot. O centre heel and tendon angle. Feet are both hyper sensitive so incorporating the correct shape into each shoe reduces pressure on the foot to a minimum and relives pain.

Justification

Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s Gir 1 has been used to classify this product by the terms of heading 9021- orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability Gir 6 has been used to classify the goods to subheading level 902110 - orthopaedic or fracture appliances Eight Digit Code 90211010 - orthopaedic appliances Also classified in accordance with: Note 6 to Chapter 90 Additional Note 2, 1st and 2nd paragraphs to Chapter 90 Harmonised …
UK 9021101000 Valable du 24 nov. 2025 au 23 nov. 2028 · Décision 600014233 sur GOV.UK

Made-to-measure shoe designed for an individual with physical abnormalities that preclude wearing normal 'off the shelf' footwear. Upper: Full grain calf. Vamp lining: Orthopaedic calf 0.7mm thick. Insole: Oak bark tanned calf. Shank: Oak bark tanned calf. Forepart filler (under insole): Tar impregnated wool felt Outsole: Oak bark tanned calf. Heel: Stacked oak bark tanned leather with inset rubber dovetail on top piece. Made to measure to accommodate chronic painful foot condition. Hallux Valgus 40º on right foot, moderate Hallux Valgus on left foot. Detailed measurements of feet taken then bespoke lasts and patterns created in house. Heel to ball, tread line, arch shape and foot shape / instep shape / perimeter of foot shape and all measurements unique to each foot (left and right are unique). Customised asymmetrical topline heights based on individual wearer’s ankle heights, which provides maximum support without interfering with ankle bones. Leather heel stiffener moulded to shape of heel and tendon, for comfort and eliminate heel slippage. Extended length and extra strength leather side stiffeners, for support and address over-pronation. Large toe box height to accommodate hammer toes. Shoes pitched neutrally, to ensure correct postural alignment and weight distribution. Oak bark tanned leather used for insole and structural stiffeners and mid soles is blocked to shape of last and correctly moulded to the individual foot shape. This material is also breathable, and antimicrobial, and allows slight additional moulding after a short period of wear, to increase comfort and support. Insole arch support is in itself an inbuilt custom orthotic. Countersunk heel base that reflects the customer’s actual heel shape.

Justification

Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s Gir 1 has been used to classify this product by the terms of heading 9021- orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability Gir 6 has been used to classify the goods to subheading level 902110 - orthopaedic or fracture appliances Eight Digit Code 90211010 - orthopaedic appliances Also classified in accordance with: Note 6 to Chapter 90 Additional Note 2, 1st and 2nd paragraphs to Chapter 90 Harmonised …
UK 9021101000 Valable du 24 nov. 2025 au 23 nov. 2028 · Décision 600014234 sur GOV.UK

Made-to-measure shoe designed for an individual with physical abnormalities that preclude wearing normal 'off the shelf' footwear. Upper: Full grain calf. Vamp lining: Orthopaedic calf 0.7mm thick. Quarter lining: Orthopaedic calf 0.7mm thick. Insole (both): Oak bark tanned calf. Insole (right foot only): 1.5mm Poron (performance) cushioning under 4th and 3rd metatarsal heads. Custom height and shape metatarsal lift using 2.4mm Poron performance. Full leather sock in Orthopaedic calf 0.9mm thick. Insole (left foot only): Metatarsal lift using Algeos 2032 metatarsal pad soft foam in size 2. Full leather sock in Orthopaedic calf 0.9mm thick. Shank: Oak bark tanned calf. Forepart filler (under insole): Tar impregnated wool felt Outsole: Oak bark tanned calf midsole with 6mm Topy Rug rubber sole. Heel: Stacked oak bark tanned leather with 6mm Topy Rug rubber sole top piece. Made to measure to accommodate edema in diabetic which causes chronic painful discomfort and hyper sensitivity. 1.5mm Poron (performance) cushioning under 4th and 3rd metatarsal heads due to severe fat pad atrophy. Custom height and shape metatarsal lift using 2.4mm Poron performance. Full leather sock in Orthopaedic calf 0.9mm thick. Insole (left foot only): Metatarsal lift using Algeos 2032 metatarsal pad soft foam in size 2 to alleviate metatarsalgia. Full leather sock in Orthopaedic calf 0.9mm thick. Detailed measurements of feet taken then bespoke lasts and patterns created in house. Heel to ball, tread line, arch shape and foot shape / instep shape / perimeter of foot shape and all measurements unique to each foot (left and right are unique). Customised asymmetrical topline heights based on individual wearer’s ankle heights, which provides maximum support without interfering with ankle bones. Leather heel stiffener moulded to shape of heel and tendon, for comfort and eliminate heel slippage. Large toe box height and width to accommodate swelling and callouses. Shoes pitched neutrally, to ensure correct postural alignment and weight distribution. Oak bark tanned leather used for insole and structural stiffeners and mid soles is blocked to shape of last and correctly moulded to the individual foot shape. This material is also breathable, and antimicrobial, and allows slight additional moulding after a short period of wear, to increase comfort and support. Insole arch support is in itself an inbuilt custom orthotic. Countersunk heel base that reflects the customer’s actual heel shape. Rubber sole for stability and cushioning. Pattern positioned to avoid 5th metatarsal base.

Justification

Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s Gir 1 has been used to classify this product by the terms of heading 9021- orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability Gir 6 has been used to classify the goods to subheading level 902110 - orthopaedic or fracture appliances Eight Digit Code 90211010 - orthopaedic appliances Also classified in accordance with: Note 6 to Chapter 90 Additional Note 2, 1st and 2nd paragraphs to Chapter 90 Harmonised …
UK 9021101000 Valable du 24 nov. 2025 au 23 nov. 2028 · Décision 600014237 sur GOV.UK

Made-to-measure shoe designed for an individual with physical abnormalities that preclude wearing normal 'off the shelf' footwear. Upper: Full grain calf. Vamp lining: Orthopaedic calf 0.7mm thick. Quarter lining: Calf 1.1mm thick. Insole (both): Oak bark tanned calf. Shank: Oak bark tanned calf. Forepart filler (under insole): Natural cork Outsole: Vibram Gumlite 2602 unit sole. Made to measure with custom arch support to accommodate and treat pez planus feet. Arch support built into insole so that no orthotic device needed in combination with long and strong side stiffeners and strong shanks for rigidity. Cork filling and foam Gumlite sole for cushioning. Detailed measurements of feet taken then bespoke lasts and patterns created in house. Heel to ball, tread line, arch shape and foot shape / instep shape / perimeter of foot shape and all measurements unique to each foot (left and right are unique). Customised asymmetrical topline heights based on individual wearer’s ankle heights, which provides maximum support without interfering with ankle bones. Leather heel sti ener moulded to shape of heel and tendon, for comfort and eliminate heel slippage. Extended length and extra strength leather side stiffeners, for support and address over-pronation. Shoes pitched neutrally, to ensure correct postural alignment and weight distribution. Oak bark tanned leather used for insole and structural stiffeners and mid soles is blocked to shape of last and correctly moulded to the individual foot shape. This material is also breathable, and antimicrobial, and allows slight additional moulding after a short period of wear, to increase comfort and support. Insole arch support is in itself an inbuilt custom orthotic. Countersunk heel base that reflects the customer’s actual heel shape.

Justification

Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s Gir 1 has been used to classify this product by the terms of heading 9021- orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability Gir 6 has been used to classify the goods to subheading level 902110 - orthopaedic or fracture appliances Eight Digit Code 90211010 - orthopaedic appliances Also classified in accordance with: Note 6 to Chapter 90 Additional Note 2, 1st and 2nd paragraphs to Chapter 90 Harmonised …
UK 9021101000 Valable du 14 avr. 2026 au 13 avr. 2029 · Décision 600015301 sur GOV.UK

Made to measure Men's Lace up orthopaedic shoes. Heel to ball, tread line, arch shape and foot shape / instep shape / perimeter of foot shape and all measurements unique to each foot (left and right are unique). Customised asymmetrical toplines heights based on individual wearer’s ankle heights, which provides maximum support without interfering with ankle bones. Leather heel stiffener moulded to shape of heel and tendon, for comfort and eliminate heel slippage. Shoes pitched neutrally, to ensure correct postural alignment and weight distribution. Oak bark tanned leather used for insole and structural stiffeners blocked to shape of last and correctly moulded to the individual foot shape. This material is also breathable, and antimicrobial, and allows slight additional moulding after a short period of wear, to increase comfort and support. Insole arch support is in itself an inbuilt custom orthotic. Oak bark tanned leather sole for flexibility and comfort. Countersunk heel base that reflects the customer’s actual heel shape. Other specific features: Lace up shoes Left foot: Pronation accurately accommodated Higher arch. Right foot: Off centre heel and tendon angle. Greater curvature of foot. Wider joint

Justification

Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s Gir 1 has been used to classify this product by the terms of heading 9021- orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability Gir 6 has been used to classify the goods to subheading level 902110 - orthopaedic or fracture appliances Eight Digit Code 90211010 - orthopaedic appliances Also classified in accordance with: Note 6 to Chapter 90 Additional chapter notes 2 to Heading 9021 Harmonised System …
UK 9021101000 Valable du 14 avr. 2026 au 13 avr. 2029 · Décision 600015302 sur GOV.UK

Made to measure Men's Slip on orthopaedic shoes.. Heel to ball, tread line, arch shape and foot shape / instep shape / perimeter of foot shape and all measurements unique to each foot (left and right are unique). Customised asymmetrical toplined heights based on individual wearer’s ankle heights, which provides maximum support without interfering with ankle bones. Leather heel stiffener moulded to shape of heel and tendon, for comfort and eliminate heel slippage. Shoes pitched neutrally, to ensure correct postural alignment and weight distribution. Oak bark tanned leather used for insole and structural stiffeners blocked to shape of last and correctly moulded to the individual foot shape. This material is also breathable, and antimicrobial, and allows slight additional moulding after a short period of wear, to increase comfort and support. Insole arch support is in itself an inbuilt custom orthotic. Oak bark tanned leather sole for flexibility and comfort. Countersunk heel base that reflects the customer’s actual heel shape. Other specific features: Slip on shoes Left foot: Hypersensitive cuneiform bone on instep accurately accommodated. O centre heel and tendon angle. Greater curvature of foot. Long inside stiffeners along arch to support pronation. Higher arch. Right foot: Wider joint. Long inside stiffeners along arch to support pronation.

Justification

Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s Gir 1 has been used to classify this product by the terms of heading 9021- orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability Gir 6 has been used to classify the goods to subheading level 902110 - orthopaedic or fracture appliances Eight Digit Code 90211010 - orthopaedic appliances Also classified in accordance with: Note 6 to Chapter 90 Additional chapter notes 2 to Heading 9021 Harmonised System …
UK 9021109000 Valable du 22 nov. 2024 au 21 nov. 2027 · Décision 600011877 sur GOV.UK

A 3 Panel Knee Immobilisation Splint that is for Post-operative immobilisation of the knee. Total immobilisation at 0°, 4 radiolucent, it is removable, adjustable and rigid stays. 3-panel structure adapts to various leg circumferences with comfortable foam padding. Made from Polyamide, Cotton, Polyester, Polyurethene, Polypropylene Packaged in a plastic bag

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect - a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9021 - Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 902110 - Orthopaedic or fracture appliances 8-digit code 90211090 - splints and other fracture appliances Also classified in accordance with: General Note 6 to …

Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.

Commerce de l’UE en 2025 pour 902110

Importations extra-UE: 2,3 Md €; 30 190 t
Exportations extra-UE: 1,9 Md €

Principaux pays d’origine selon la valeur importée

États-Unis 790,1 M €
Suisse 565 M €
Mexique 433,5 M €
Chine 272,4 M €
Tunisie 28,8 M €

Codes NC8 sous ce code : 2. Source : Eurostat, Comext, CC BY 4.0, traité par hscode.info. Le commerce confidentiel n’est pas attribué aux codes.

Droit d’importation au Royaume-Uni pour 902110

Droits de pays tiers de tous les codes britanniques sous cette sous-position du SH. Source : UK Department for Business and Trade, au 2 nov. 2026. Le tarif britannique diffère du tarif de l’UE.

TVA à l’importation dans l’UE

Allemagne 19 % éventuellement 7 %
Autriche 20 %
Belgique 21 % éventuellement 6 %
Bulgarie 20 %
Chypre 19 % éventuellement 3 %, 5 %
Croatie 25 % éventuellement 5 %
Danemark 25 %
Espagne 21 % éventuellement 10 %
Estonie 24 % éventuellement 9 %
Finlande 25,5 %
France 20 %
Grèce 24 % éventuellement 13 %
Hongrie 27 %
Irlande 23 %
Italie 22 % éventuellement 4 %
Lettonie 21 % éventuellement 12 %
Lituanie 21 % éventuellement 5 %
Luxembourg 17 % éventuellement 3 %
Malte 18 %
Pays-Bas 21 % éventuellement 9 %
Pologne 23 %
Portugal 23 % éventuellement 6 %
Roumanie 21 %
Slovaquie 23 % éventuellement 5 %
Slovénie 22 % éventuellement 9,5 %
Suède 25 %
Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Les règles d’origine préférentielles de la sous-position 902110 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.

Règles d’origine sur Access2Markets

Informations

Lorsque vous importez ou exportez "Articles et appareils d'orthopédie ou pour fractures", il est important d'avoir le bon code SH ou code TARIC. Le code HS 9021100000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.

Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Articles et appareils d'orthopédie ou pour fractures", veuillez noter les points suivants :

Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Articles et appareils d'orthopédie ou pour fractures".
Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Articles et appareils d'orthopédie ou pour fractures" dans le pays de destination ou l'exporter depuis le pays d'origine.
Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.

En résumé, le code HS-Code ou le code TARIC pour "Articles et appareils d'orthopédie ou pour fractures" est 9021100000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Articles et appareils d'orthopédie ou pour fractures".

Structure du HS-Code

1. Chapitre

Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 90 a été sélectionné pour instruments et appareils d'optique, de photographie ou de cinématographie, de mesure, de contrôle ou de précision; instruments et appareils médico-chirurgicaux; parties et accessoires de ces instruments ou appareils

2. Titre

Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 21 se réfère à Articles et appareils d'orthopédie, y compris les ceintures et bandages médico-chirurgicaux et les béquilles; attelles, gouttières et autres articles et appareils pour fractures; articles et appareils de prothèse; appareils pour faciliter l'audition aux sourds et autres appareils à tenir à la main, à porter sur la personne ou à implanter dans l'organisme, afin de compenser une déficience ou une infirmité.

3. Sous-titre

Les deux derniers chiffres du code harmonisé international sont plus spécifiques et définissent des sous-catégories de produits. Dans l'exemple ci-dessus, la 10 se réfère à Articles et appareils d'orthopédie ou pour fractures.

Arborescence HS-Code

9000000000 80

Chapitre INSTRUMENTS ET APPAREILS D'OPTIQUE, DE PHOTOGRAPHIE OU DE CINÉMATOGRAPHIE, DE MESURE, DE CONTRÔLE OU DE PRÉCISION; INSTRUMENTS ET APPAREILS MÉDICO-CHIRURGICAUX; PARTIES ET ACCESSOIRES DE CES INSTRUMENTS OU APPAREILS

9021000000 80

Articles et appareils d'orthopédie, y compris les ceintures et bandages médico-chirurgicaux et les béquilles; attelles, gouttières et autres articles et appareils pour fractures; articles et appareils de prothèse; appareils pour faciliter l'audition aux sourds et autres appareils à tenir à la main, à porter sur la personne ou à implanter dans l'organisme, afin de compenser une déficience ou une infirmité

9021100000 80

- Articles et appareils d'orthopédie ou pour fractures

9021101000 80

- - Articles et appareils d'orthopédie

9021109000 80

- - Articles et appareils pour fractures

9021210000 10

- Articles et appareils de prothèse dentaire

9021210000 80

- - Dents artificielles

9021211000 80

- - - en matières plastiques

9021219000 80

- - - en autres matières

9021290000 80

- - autres

9021310000 10

- autres articles et appareils de prothèse

9021310000 80

- - Prothèses articulaires

9021390000 80

- - autres

9021391000 80

- - - Prothèses oculaires

9021399000 80

- - - autres

9021400000 80

- Appareils pour faciliter l'audition aux sourds, à l'exclusion des parties et accessoires

9021500000 80

- Stimulateurs cardiaques, à l'exclusion des parties et accessoires

9021900000 80

- autres

9021901000 80

- - Parties et accessoires d'appareils pour faciliter l'audition aux sourds

9021909000 80

- - autres

Numéro tarifaire 9021100000 80 - Articles et appareils d'orthopédie ou pour fractures

Restrictions commerciales pour l'importation de marchandises pour 9021100000 80

Explication des restrictions commerciales

Estimer le coût d’importation pour 902110

Mesures à l’exportation pour 9021100000

Historique

Règles d’origine préférentielles pour 9021100000

Notes légales et notes explicatives pour 9021100000

Règlements de classement de l’UE pour 9021100000

Renseignements tarifaires du Royaume-Uni pour 9021100000

Commerce de l’UE en 2025 pour 902110

Principaux pays d’origine selon la valeur importée

Droit d’importation au Royaume-Uni pour 902110

TVA à l’importation dans l’UE

Règles d’origine

Informations

Structure du HS-Code

1. Chapitre

2. Titre

3. Sous-titre

Arborescence HS-Code