Import trade restrictions for 7606000000 80
This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.
| Origin country | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
| United Kingdom GB | 01-01-2025 | 0 % | Preferential tariff quota 143 | |
1011 | ERGA OMNES 1011 | 01-01-2005 | 7.5 % | Third country duty 103 |
| North Macedonia MK | 01-01-2009 | 0 % | Tariff preference 142 | |
| Bosnia and Herzegovina BA | 01-01-2009 | 0 % | Tariff preference 142 | |
2027 | GSP+ (incentive arrangement for sustainable development and good governance) 2027 | 01-01-2014 | 0 % | Tariff preference 142 |
| Ecuador EC | 01-01-2017 | 0 % | Tariff preference 142 | |
2020 | GSP - General arrangements 2020 | 01-01-2017 | 4 % | Tariff preference 142 |
XS | Serbia XS | 01-02-2010 | 0 % | Tariff preference 142 |
| Japan JP | 01-02-2020 | 0 % | Tariff preference 142 | |
| Peru PE | 01-03-2013 | 0 % | Tariff preference 142 | |
| Albania AL | 01-04-2009 | 0 % | Tariff preference 142 | |
| Kosovo XK | 01-04-2016 | 0 % | Tariff preference 142 | |
| Montenegro ME | 01-05-2010 | 0 % | Tariff preference 142 | |
| New Zealand NZ | 01-05-2024 | 0 % | Tariff preference 142 | |
2200 | Central America 2200 | 01-08-2013 | 0 % | Tariff preference 142 |
| Colombia CO | 01-08-2013 | 0 % | Tariff preference 142 | |
| North Korea (Democratic People’s Republic of Korea) KP | 01-09-2017 | Import prohibition 277 | ||
1011 | ERGA OMNES 1011 | 01-11-2018 | 0 % | Airworthiness tariff suspension 119 |
| Ukraine UA | 06-06-2023 | 0 % | Tariff preference 142 | |
| South Africa ZA | 10-10-2016 | 0 % | Tariff preference 142 | |
| Armenia AM | 10-10-2026 – 11-10-2028 | 0 % | Tariff preference 142 | |
| India IN | 20-01-2024 – 31-12-2026 | Restriction on entry into free circulation 475 | ||
| China CN | 20-01-2024 – 31-12-2026 | Restriction on entry into free circulation 475 | ||
| Belarus BY | 20-01-2024 – 31-12-2026 | Restriction on entry into free circulation 475 | ||
| Canada CA | 21-09-2017 | 0 % | Tariff preference 142 | |
| EU-Canada agreement: re-imported goods 1006 | 21-09-2017 | 0 % | Tariff preference 142 | |
| Faroe Islands FO | 01-01-1997 | 0 % | Tariff preference 142 | |
XL | Melilla XL | 01-01-1999 | 0 % | Accession act0001/85 Tariff preference 142 |
| Occupied palestinian Territory PS | 01-01-2001 | 0 % | Tariff preference 142 | |
| San Marino SM | 01-01-2006 | 0 % | Customs union duty 106 | |
| Türkiye TR | 01-01-2006 | 0 % | Customs union duty 106 | |
| Andorra AD | 01-01-2006 | 0 % | Customs union duty 106 | |
| EU-Switzerland agreement: re-imported goods 1007 | 01-01-2007 | 0 % | Tariff preference 142 | |
2005 | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005 | 01-01-2014 | 0 % | Tariff preference 142 |
| Moldova, Republic of MD | 01-01-2016 | 0 % | Tariff preference 142 | |
| United Kingdom GB | 01-01-2021 | 0 % | Tariff preference 142 | |
2080 | OCTs (Overseas Countries and Territories) 2080 | 01-01-2021 | 0 % | Tariff preference 142 |
| Singapore SG | 01-01-2027 | 0 % | Tariff preference 142 | |
| Ghana GH | 01-01-2027 | 0 % | Tariff preference 142 | |
| Chile CL | 01-02-2025 | 0 % | Tariff preference 142 | |
| Tunisia TN | 01-03-1998 | 0 % | Tariff preference 142 | |
| Morocco MA | 01-03-2000 | 0 % | Tariff preference 142 | |
| Lebanon LB | 01-04-2006 | 0 % | Tariff preference 142 | |
| Jordan JO | 01-05-2002 | 0 % | Tariff preference 142 | |
| Egypt EG | 01-06-2004 | 0 % | Tariff preference 142 | |
XC | Ceuta XC | 01-07-1991 | 0 % | Accession act0001/85 Tariff preference 142 |
2012 | EEA - European Economic Area 2012 | 01-07-2007 | 0 % | Tariff preference 142 |
| Korea, Republic of (South Korea) KR | 01-07-2011 | 0 % | Tariff preference 142 | |
| Mexico MX | 01-07-2016 | 0 % | Tariff preference 142 | |
| Kenya KE | 01-07-2024 | 0 % | Tariff preference 142 | |
| United States US | 01-07-2026 | 0 % | Tariff preference 142 | |
| Syria SY | 01-08-1994 | 0 % | Tariff preference 142 | |
| Algeria DZ | 01-09-2005 | 0 % | Tariff preference 142 | |
| Georgia GE | 01-09-2014 | 0 % | Tariff preference 142 | |
1011 | ERGA OMNES 1011 | 01-11-2026 | 2 EUR | Union handling fee 800 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 3 EUR | Low-value consignment customs duty 107 |
| Ivory Coast CI | 02-12-2019 | 0 % | Tariff preference 142 | |
2000 | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000 | 03-10-2025 | 0 % | Tariff preference 142 |
| Cameroon CM | 04-08-2014 | 0 % | Tariff preference 142 | |
1035 | SADC EPA 1035 | 10-10-2016 | 0 % | Tariff preference 142 |
1034 | Eastern and Southern Africa States 1034 | 14-05-2012 | 0 % | Tariff preference 142 |
| Ghana GH | 15-12-2016 – 31-12-2026 | 0 % | Tariff preference 142 | |
| Israel IL | 16-05-2023 | 0 % | Tariff preference 142 | |
| Solomon Islands SB | 17-05-2020 | 0 % | Tariff preference 142 | |
| Switzerland CH | 20-12-1972 | 0 % | Tariff preference 142 | |
| Papua New Guinea PG | 20-12-2009 | 0 % | Tariff preference 142 | |
| Singapore SG | 21-11-2019 – 31-12-2026 | 0 % | Tariff preference 142 | |
| Fiji FJ | 28-07-2014 | 0 % | Tariff preference 142 | |
1033 | CARIFORUM 1033 | 29-12-2008 | 0 % | Tariff preference 142 |
| Samoa WS | 31-12-2018 | 0 % | Tariff preference 142 |
| Origin country | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
1008 | All third countries 1008 | 01-01-2026 – 31-12-2026 | Document required banned without it | Carbon Border Adjustment Mechanism - CBAM 775 |
| North Korea (Democratic People’s Republic of Korea) KP | 01-09-2017 | Document required banned without it | Import control 714 | |
| Russian Federation RU | 19-12-2023 – 31-12-2027 | Document required banned without it | Import control 762 | |
| Belarus BY | 25-02-2025 | Document required banned without it | Import control 760 | |
| Ukraine UA | 24-06-2026 | Document required banned without it | Import control 762 | |
| Ukraine UA | 24-06-2026 | Document required banned without it | Import control 760 |
Explanation of trade restrictions
Erga Omnes means "for all".
Third countries are countries that are not part of the EU.
GSP means "Generalised System of Preferences".
GSP Plus means "Generalised System of Preferences Plus".
European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.
OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information
CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.
SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".
Duty means "customs duties".
Estimate the import cost for 7606000000
An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.
Export measures for 7606000000
What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.
| Destination | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
| North Korea (Democratic People’s Republic of Korea) KP | 28-02-2018 | Export prohibition 278 |
| Destination | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
| North Korea (Democratic People’s Republic of Korea) KP | 01-09-2017 | Document required banned without it | Export control 709 | |
| Iran, Islamic Republic of IR | 30-09-2025 | Document required banned without it | Export control 781 | |
| Belarus BY | 20-07-2025 | Document required banned without it | Export control 766 | |
| Ukraine UA | 25-02-2025 | Document required banned without it | Export control 709 | |
| Ukraine UA | 25-08-2022 | Document required banned without it | Export control 767 |
History
Duty rates and measures for this code over time (yearly snapshots).
Preferential rules of origin for 7606000000
What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algeria
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland
EU-Egypt Association Agreement · Egypt
EU-Georgia DCFTA · Georgia
EU-Jordan Association Agreement · Jordan
EU-Central America Association Agreement
EU-Morocco Association Agreement · Morocco
EU-Moldova DCFTA · Moldova
Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye
EU-Tunisia Association Agreement · Tunisia
EU-Ukraine DCFTA · Ukraine
Aluminium and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan
EU-Singapore FTA · Singapore
Aluminium and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product
EPA CARIFORUM
EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands
Aluminium and articles thereof; except for: / or: Manufacture in which: – all the materials used are classified within a heading other than that of the product; – the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Canada CETA · Canada
A change from any other heading.
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru
Aluminium bars, rods and profiles, wire, plates and sheets / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product
EPA Eastern and Southern Africa
Unwrought aluminium / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; and the value of all the materials used does not exceed 50 % of the ex-works price of the product / or: Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya
Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Iceland FTA · Iceland
Aluminium and articles thereof; except for: / or: Manufacture: – from materials of any heading, except that of the product, and – in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Japan EPA · Japan
CTH and MaxNOM 50 % (EXW); or CTH and RVC 55 % (FOB).
EU-Korea FTA · South Korea
Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm / or: Manufacture: – from materials of any heading, except that of the product, and – in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Lebanon Association Agreement · Lebanon
Aluminium and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexico
Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product, the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palestine
Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50% of the ex-works price of the product
EPA SADC · South Africa
Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50 % of the ex–works price of the product
EU-Viet Nam FTA · Vietnam
Aluminium and articles thereof, except: / or: Manufacture from materials of any heading, except that of the product.
Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets
Legal and explanatory notes for 7606000000
Notes to chapter 76
Subheading notes Additional notes 1. For the purposes of subheadings 7601 10 10, 7601 20 30 and 7601 20 40, the following terms shall have the meaning hereby assigned to them: — ‘slabs’: unwrought products which have a uniform solid cross-section along their whole length in the shape of a rectangle or other polygon, of a width exceeding 800 mm, of a thickness exceeding 280 mm and of a length always superior to the width and to the thickness. These products are intended for being rolled; — ‘billets’: unwrought products which have a uniform solid cross-section along their whole length in the shape of a circle (including a ‘flattened circle’), of a diameter exceeding 125 mm. 2. For the purposes of subheadings 7606 12 11 and 7606 12 19, the following terms shall have the meaning hereby assigned to them: — ‘beverage can body stock’: sheets or strips in coils, rolled, having manganese and magnesium as main alloying elements and having a minimum tensile strength of 262 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 300 mm or more but not more than 2 000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,4 mm, and of a length always superior to the width and to the thickness. Beverage can body stock is prelubricated, with a bright surface; — ‘beverage can end stock and tab stock’: sheets or strips in coils, having magnesium as the main alloying element and having a minimum tensile strength 345 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 30 mm or more but not more than 2 000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,35 mm, and of a length always superior to the width and to the thickness. Beverage can end stock is varnished on both sides. Beverage can tab stock is degreased and oiled. These products are to be used for the fabrication of rigid beverage cans, including ends (lids) and tabs. 3. For the purposes of subheadings 7606 11 30, 7606 12 30 and 7607 20 91, the following term shall have the meaning hereby assigned to it: — ‘Aluminium Composite Panel’: laminated goods consisting of two flat-rolled sheets or foils of aluminium, whether or not alloyed, each of them having a thickness of not less than 0,08 mm but not exceeding 0,55 mm, and a continuous core of non-porous polymer or mineral material, held together with an adhesive, all together having a thickness of 1,0 mm or more, but not exceeding 6,1 mm. The two external aluminium cover sheets or foils can have different finishes. These goods cannot be coiled.
Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex
UK advance tariff rulings for 7606000000
Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.
- UK 7606115089 Valid Apr 23, 2024 to Apr 22, 2027 · Ruling 600010255 on GOV.UK
Aluminium Composite Panels The materials composition is as follows: 3050 x 1500 x 3mm aluminium composite sheet comprising two 0.21 mm thick aluminium cover layers and a polyethylene or mineral core; the aluminium layer is coated in PE paint finish. The goods are used to make signs - flatbed printed direct on to aluminium panel sheets often referred to as 'Sandwich Panel' or 'Signboard'. Sheets come palletised.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s Gir 1 has been used to classify this product by the terms of heading 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm Gir 5 (b) has been used to identify the type of packaging. Gir 6 has been used to classify the goods to subheading level 760611 rectangular (including squares) of aluminium not alloyed Eight Digit Code 76061150 Painted varnished or coated with plastics Ten Digit Code 7606115089 other than else where specified Also classified in accordance with : Section XV Note 3 Harmonised System Explanatory Notes (HSENs) to Heading 7606 and subheading 7606.11
- UK 7606129386 Valid Feb 22, 2024 to Feb 21, 2027 · Ruling 600009304 on GOV.UK
Aluminium alloy sheets. Hot rolled from molten aluminium and 3mm thick. The sheets are flat, (not folded) not backed, without internal layers of other material and oblong in shape. The product will be used to form panels for balconies and will be later folded and cut to size as required but not exceeding a maximum width of 2000mm and a maximum length of 4000mm due to manufacturing limit. The product is palletised and wrapped for transport purposes.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of Heading 7606 - Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm. GIR 5(b) has been used to identify the type of packaging - Packaged palletize and wrapped. GIR 6 has been used to classify this product to subheading level 760612 - Rectangular (including square); of aluminium alloys. 8 Digit Code 76061293 - Other than beverage can body stock, end stock and tab stock; other than aluminium composite panel; other of a thickness of, not less than 3 mm but less than 6 mm. 10 digit code 7606129386 - Other than plates bearing a specific …
- UK 7606129986 Valid Feb 23, 2024 to Feb 22, 2027 · Ruling 600009305 on GOV.UK
Aluminium alloy sheets. Hot rolled from molten aluminium and 6mm thick. The sheets are flat, (not folded) not backed, without internal layers of other material and oblong in shape. The product will be used to form panels for balconies and will be later folded and cut to size as required but not exceeding a maximum width of 2000mm and a maximum length of 4000mm due to manufacturing limit. The product is palletised and wrapped for transport purposes.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of Heading 7606 - Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm. GIR 5(b) has been used to identify the type of packaging - Packaged palletize and wrapped. GIR 6 has been used to classify this product to subheading level 760612 - Rectangular (including square); of aluminium alloys. 8 Digit Code 76061299 - Other than beverage can body stock, end stock and tab stock; other than aluminium composite panel; other of a thickness of not less than 6 mm. 10 digit code 7606129986 - Other than plates bearing a specific manufacture number, for …
+ 2 more
- UK 7606129986 Valid Feb 10, 2025 to Feb 9, 2028 · Ruling 600012087 on GOV.UK
This product is a hot rolled, aluminium alloy plate. That is a flat rectangular shape (including square). Standard dimensions: Thicknesses of 6mm to 420mm, lengths up to 25000mm. The manufactured process plates minimum measurement can be 6mm thickness, width 600mm and length of 2000mm. All process plates will be cut to size to meet customer satisfaction requirements at a minimum of 50mm (W) x 50mm (L). The plates are to be used in sectors such as aerospace, defence, general engineering and commercial within the UK as well as outside the UK home market. The product is sometimes cold compressed as part of the stress relieving process. Material is packed down into wooden cases/supports and often wrapped with a hard board top and base in plastic covering for further protection from the elements.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 7606 - Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm GIR 5b has been used to identify the type of packaging (Pallet) GIR 6 has been used to classify the goods to subheading level 760612 - Of aluminium alloys Eight digit code 76061299 - Not less than 6mm; Other than elsewhere specified within this heading Ten digit code 7606129986 - Other than; For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts Also classified in accordance with: Note 1b to Chapter 76 Note 3 to Section XV …
- UK 7606129988 Valid Aug 14, 2024 to Aug 13, 2027 · Ruling 600010824 on GOV.UK
This product is a hot rolled, aluminium alloy plate. Flat rectangular (including square) shape. Standard dimensions: Thickness of 6mm to 150mm. Width up to 1800mm. Length up to 5000mm. Maximum measures can reach: width 2200mm / length 10000mm. The plates are to be used typically for parts requiring a high level of mechanical properties and good resistance to stress-corrosion cracking, but usage is not limited to such applications. Material comes palletised.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 7606 - Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm GIR 5b has been used to identify the type of packaging (Pallet) GIR 6 has been used to classify the goods to subheading level 760612 - Of aluminium alloys Eight digit code 76061299 - Not less than 6mm; Other than elsewhere specified within this heading Ten digit code 7606129988 - Other than elsewhere specified within this subheading Also classified in accordance with: Note 3 to Section XV Note 9(d) to Section XV Harmonised System Explanatory Notes (HSENs) to heading 7606
Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.
Restrictions and flags for 7606000000
- CBAM: carbon border adjustment Regulation (EU) 2023/956, Annex I 7606
Sector: aluminium
Read the act on EUR-Lex - Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 7606
Art. 3i, goods generating significant revenue for Russia
Read the act on EUR-Lex
For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.
Import VAT in the EU
- Austria 20 %
- Belgium 21 %
- Bulgaria 20 %
- Croatia 25 %
- Cyprus 19 %
- Czechia 21 %
- Denmark 25 %
- Estonia 24 %
- Finland 25.5 %
- France 20 %
- Germany 19 %
- Greece 24 %
- Hungary 27 %
- Ireland 23 %
- Italy 22 %
- Latvia 21 %
- Lithuania 21 %
- Luxembourg 17 %
- Malta 18 %
- Netherlands 21 %
- Poland 23 %
- Portugal 23 %
- Romania 21 %
- Slovakia 23 %
- Slovenia 22 %
- Spain 21 %
- Sweden 25 %
Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.
Rules of origin
Preferential rules of origin for subheading 760600 depend on the trade agreement. The Commission publishes them in Access2Markets.
Rules of origin on Access2MarketsInformation
When importing or exporting "Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm", it is crucial to have the correct HS code or TARIC code. The HS code 7606000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm".
- Check if any additional licenses, permits, or certificates are required to import "Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm" is 7606000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 76 was selected for aluminium and articles thereof
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 06 refers to Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm.
HS Code tree structure
7600000000 80
Chapter ALUMINIUM AND ARTICLES THEREOF
7606000000 80
Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm
7606110000 10
- Rectangular (including square)
7606110000 80
- - Of aluminium, not alloyed
7606113000 80
- - - Aluminium Composite Panel
7606115000 10
- - - Other
7606115000 80
- - - - Painted, varnished or coated with plastics
7606115025 10
- - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft
7606115025 80
- - - - - - Not backed, without internal layers of other material
7606115030 80
- - - - - - Other
7606115086 10
- - - - - Other
7606115086 80
- - - - - - Not backed, without internal layers of other material
7606115089 80
- - - - - - Other
7606119100 10
- - - - Other, of a thickness of
7606119100 80
- - - - - Less than 3 mm
7606119125 10
- - - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft
7606119125 80
- - - - - - - Not backed, without internal layers of other material
7606119130 80
- - - - - - - Other
7606119186 10
- - - - - - Other
7606119186 80
- - - - - - - Not backed, without internal layers of other material
7606119189 80
- - - - - - - Other
7606119300 80
- - - - - Not less than 3 mm but less than 6 mm
7606119325 10
- - - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft
7606119325 80
- - - - - - - Not backed, without internal layers of other material
7606119330 80
- - - - - - - Other
7606119386 10
- - - - - - Other
7606119386 80
- - - - - - - Not backed, without internal layers of other material
7606119389 80
- - - - - - - Other
7606119900 80
- - - - - Not less than 6 mm
7606119925 10
- - - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft
7606119925 80
- - - - - - - Not backed, without internal layers of other material
7606119930 80
- - - - - - - Other
7606119986 10
- - - - - - Other
7606119986 80
- - - - - - - Not backed, without internal layers of other material
7606119989 80
- - - - - - - Other
7606120000 80
- - Of aluminium alloys
7606121100 10
- - - Beverage can body stock, end stock and tab stock
7606121100 80
- - - - Beverage can body stock
7606121900 80
- - - - Beverage can end stock and tab stock
7606123000 80
- - - Aluminium Composite Panel
7606125000 10
- - - Other
7606125000 80
- - - - Painted, varnished or coated with plastics
7606125023 10
- - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft
7606125023 20
- - - - - - Not backed, without internal layers of other material
7606125023 80
- - - - - - - Of a thickness of not less than 0,8 mm
7606125025 80
- - - - - - - Other
7606125030 80
- - - - - - Other
7606125085 10
- - - - - Other
7606125085 20
- - - - - - Not backed, without internal layers of other material
7606125085 80
- - - - - - - For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm
7606125087 10
- - - - - - - Other
7606125087 80
- - - - - - - - Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels
7606125088 80
- - - - - - - - Other
7606125089 80
- - - - - - Other
7606129200 10
- - - - Other, of a thickness of
7606129200 80
- - - - - Less than 3 mm
7606129223 10
- - - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft
7606129223 20
- - - - - - - Not backed, without internal layers of other material
7606129223 80
- - - - - - - - Of a thickness of not less than 0,8 mm
7606129225 80
- - - - - - - - In coils or in coiled strips in cut-to-length sheets, or in the form of circles
7606129227 80
- - - - - - - - Other
7606129230 80
- - - - - - - Other
7606129291 10
- - - - - - Other
7606129291 20
- - - - - - - Not backed, without internal layers of other material
7606129291 80
- - - - - - - - For use as body panels in the car industry or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm
7606129292 10
- - - - - - - - Other
7606129292 80
- - - - - - - - - Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels
7606129293 80
- - - - - - - - - In coils or in coiled strips in cut-to-length sheets, or in the form of circles; of a thickness of 0,2 mm or more
7606129294 80
- - - - - - - - - Other
7606129297 80
- - - - - - - Other
7606129300 80
- - - - - Not less than 3 mm but less than 6 mm
7606129310 80
- - - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft
7606129385 10
- - - - - - Other
7606129385 20
- - - - - - - Not backed, without internal layers of other material
7606129385 80
- - - - - - - - For use as body panels in the car industry or for use in the manufacture of aircraft parts
7606129386 80
- - - - - - - - In coils or in coiled strips, in cut-to-length sheets, or in the form of circles
7606129387 80
- - - - - - - - Other
7606129388 80
- - - - - - - Other
7606129900 80
- - - - - Not less than 6 mm
7606129910 80
- - - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft
7606129921 10
- - - - - - Sheets of aluminium-lithium alloys
7606129921 20
- - - - - - - Not backed, without internal layers of other material
7606129921 80
- - - - - - - - For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts
7606129925 80
- - - - - - - - In plates, of a thickness of more than 6 mm
7606129929 80
- - - - - - - - Other
7606129930 80
- - - - - - - Other
7606129985 10
- - - - - - Other
7606129985 20
- - - - - - - Not backed, without internal layers of other material
7606129985 80
- - - - - - - - For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts
7606129986 80
- - - - - - - - In plates, of a thickness of more than 6 mm
7606129987 80
- - - - - - - - Other
7606129988 80
- - - - - - - Other
7606910000 10
- Other
7606910000 80
- - Of aluminium, not alloyed
7606910025 10
- - - Plates bearing a specific manufacture number, for use in certain types of aircraft
7606910025 80
- - - - Not backed, without internal layers of other material, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; - in plates, of a thickness exceeding 6 mm
7606910030 80
- - - - Other
7606910086 10
- - - Other
7606910086 80
- - - - Not backed, without internal layers of other material, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; - in plates, of a thickness exceeding 6 mm
7606910088 80
- - - - Other
7606920000 80
- - Of aluminium alloys
7606920023 10
- - - Plates bearing a specific manufacture number, for use in certain types of aircraft
7606920023 20
- - - - Not backed, without internal layers of other material, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; - in plates, of a thickness exceeding 6 mm
7606920023 80
- - - - - Of a thickness of not less than 0,8 mm, for use in the manufacture of aircraft parts
7606920025 80
- - - - - Other
7606920030 80
- - - - Other
7606920085 10
- - - Other
7606920085 20
- - - - Not backed, without internal layers of other material, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; - in plates, of a thickness exceeding 6 mm
7606920085 80
- - - - - For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm
7606920091 10
- - - - - Other
7606920091 80
- - - - - - Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels
7606920092 80
- - - - - - Other
7606920095 80
- - - - Other