New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 7606910000 10 - Other

Email me changes

Import trade restrictions for 7606910000 10

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 72
GB
United Kingdom GB
01-01-2025
0 %
Preferential tariff quota 143
1011
ERGA OMNES 1011
01-01-2005
7.5 %
Third country duty 103
MK
North Macedonia MK
01-01-2009
0 %
Tariff preference 142
BA
Bosnia and Herzegovina BA
01-01-2009
0 %
Tariff preference 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
EC
Ecuador EC
01-01-2017
0 %
Tariff preference 142
2020
GSP - General arrangements 2020
01-01-2017
4 %
Tariff preference 142
XS
Serbia XS
01-02-2010
0 %
Tariff preference 142
JP
Japan JP
01-02-2020
0 %
Tariff preference 142
PE
Peru PE
01-03-2013
0 %
Tariff preference 142
AL
Albania AL
01-04-2009
0 %
Tariff preference 142
XK
Kosovo XK
01-04-2016
0 %
Tariff preference 142
ME
Montenegro ME
01-05-2010
0 %
Tariff preference 142
NZ
New Zealand NZ
01-05-2024
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
KP
North Korea (Democratic People’s Republic of Korea) KP
01-09-2017
Import prohibition 277
1011
ERGA OMNES 1011
01-11-2018
0 %
Airworthiness tariff suspension 119
UA
Ukraine UA
06-06-2023
0 %
Tariff preference 142
ZA
South Africa ZA
10-10-2016
0 %
Tariff preference 142
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Tariff preference 142
IN
India IN
20-01-2024
– 31-12-2026
Restriction on entry into free circulation 475
CN
China CN
20-01-2024
– 31-12-2026
Restriction on entry into free circulation 475
BY
Belarus BY
20-01-2024
– 31-12-2026
Restriction on entry into free circulation 475
CA
Canada CA
21-09-2017
0 %
Tariff preference 142
1006
EU-Canada agreement: re-imported goods 1006
21-09-2017
0 %
Tariff preference 142
VN
Viet Nam VN
01-01-2026
– 31-12-2026
0.9 %
Tariff preference 142
5500
Mercosur 5500
01-05-2026
– 31-12-2026
6.5 %
Tariff preference 142
FO
Faroe Islands FO
01-01-1997
0 %
Tariff preference 142
XL
Melilla XL
01-01-1999
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Tariff preference 142
SM
San Marino SM
01-01-2006
0 %
Customs union duty 106
TR
Türkiye TR
01-01-2006
0 %
Customs union duty 106
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Tariff preference 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Tariff preference 142
SG
Singapore SG
01-01-2027
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
XC
Ceuta XC
01-07-1991
0 %
Accession act0001/85
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
SY
Syria SY
01-08-1994
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
GE
Georgia GE
01-09-2014
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
CH
Switzerland CH
20-12-1972
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Tariff preference 142
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 7
1008
All third countries 1008
01-01-2026
– 31-12-2026
Document required
banned without it
Carbon Border Adjustment Mechanism - CBAM 775
KP
North Korea (Democratic People’s Republic of Korea) KP
01-09-2017
Document required
banned without it
Import control 714
RU
Russian Federation RU
19-12-2023
– 31-12-2027
Document required
banned without it
Import control 762
BY
Belarus BY
25-02-2025
Document required
banned without it
Import control 760
IR
Iran, Islamic Republic of IR
30-09-2025
Document required
banned without it
Import control 714
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 7606910000

Rule of origin (Pan-Euro-Mediterranean (PEM) Convention): Aluminium and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • Customs value €1,000.00
  • Customs duty 7.5 % €75.00
  • Import VAT 19 % €204.25
  • Total €1,279.25

May be lower under conditions:

  • Airworthiness tariff suspension: 0 %

Documents and checks for Türkiye

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 7606910000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Measures 1
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Export prohibition 278
Controls and documents 6
KP
North Korea (Democratic People’s Republic of Korea) KP
01-09-2017
Document required
banned without it
Export control 709
IR
Iran, Islamic Republic of IR
30-09-2025
Document required
banned without it
Export control 781
RU
Russian Federation RU
26-06-2024
Document required
banned without it
Export control 709
BY
Belarus BY
20-07-2025
Document required
banned without it
Export control 766
UA
Ukraine UA
25-02-2025
Document required
banned without it
Export control 709
UA
Ukraine UA
25-08-2022
Document required
banned without it
Export control 767

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 7606910000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chile

    EU-Algeria Association Agreement · Algeria

    EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland

    EU-Egypt Association Agreement · Egypt

    EU-Georgia DCFTA · Georgia

    EU-Jordan Association Agreement · Jordan

    EU-Central America Association Agreement

    EU-Morocco Association Agreement · Morocco

    EU-Moldova DCFTA · Moldova

    Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

    EU-Tunisia Association Agreement · Tunisia

    EU-Ukraine DCFTA · Ukraine

    Aluminium and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan

    EU-Singapore FTA · Singapore

    Aluminium and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product

  • EPA CARIFORUM

    EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

    Aluminium and articles thereof; except for: / or: Manufacture in which: – all the materials used are classified within a heading other than that of the product; – the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Aluminium bars, rods and profiles, wire, plates and sheets / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Unwrought aluminium / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; and the value of all the materials used does not exceed 50 % of the ex-works price of the product / or: Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium

  • EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Iceland FTA · Iceland

    Aluminium and articles thereof; except for: / or: Manufacture: – from materials of any heading, except that of the product, and – in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Japan EPA · Japan

    CTH and MaxNOM 50 % (EXW); or CTH and RVC 55 % (FOB).

  • EU-Korea FTA · South Korea

    Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm / or: Manufacture: – from materials of any heading, except that of the product, and – in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Lebanon Association Agreement · Lebanon

    Aluminium and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Mexico Global Agreement · Mexico

    Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product, the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50% of the ex-works price of the product

  • EPA SADC · South Africa

    Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50 % of the ex–works price of the product

  • EU-Viet Nam FTA · Vietnam

    Aluminium and articles thereof, except: / or: Manufacture from materials of any heading, except that of the product.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 7606910000

Notes to chapter 76

Subheading notes Additional notes 1. For the purposes of subheadings 7601 10 10, 7601 20 30 and 7601 20 40, the following terms shall have the meaning hereby assigned to them: — ‘slabs’: unwrought products which have a uniform solid cross-section along their whole length in the shape of a rectangle or other polygon, of a width exceeding 800 mm, of a thickness exceeding 280 mm and of a length always superior to the width and to the thickness. These products are intended for being rolled; — ‘billets’: unwrought products which have a uniform solid cross-section along their whole length in the shape of a circle (including a ‘flattened circle’), of a diameter exceeding 125 mm. 2. For the purposes of subheadings 7606 12 11 and 7606 12 19, the following terms shall have the meaning hereby assigned to them: — ‘beverage can body stock’: sheets or strips in coils, rolled, having manganese and magnesium as main alloying elements and having a minimum tensile strength of 262 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 300 mm or more but not more than 2 000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,4 mm, and of a length always superior to the width and to the thickness. Beverage can body stock is prelubricated, with a bright surface; — ‘beverage can end stock and tab stock’: sheets or strips in coils, having magnesium as the main alloying element and having a minimum tensile strength 345 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 30 mm or more but not more than 2 000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,35 mm, and of a length always superior to the width and to the thickness. Beverage can end stock is varnished on both sides. Beverage can tab stock is degreased and oiled. These products are to be used for the fabrication of rigid beverage cans, including ends (lids) and tabs. 3. For the purposes of subheadings 7606 11 30, 7606 12 30 and 7607 20 91, the following term shall have the meaning hereby assigned to it: — ‘Aluminium Composite Panel’: laminated goods consisting of two flat-rolled sheets or foils of aluminium, whether or not alloyed, each of them having a thickness of not less than 0,08 mm but not exceeding 0,55 mm, and a continuous core of non-porous polymer or mineral material, held together with an adhesive, all together having a thickness of 1,0 mm or more, but not exceeding 6,1 mm. The two external aluminium cover sheets or foils can have different finishes. These goods cannot be coiled.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

Restrictions and flags for 7606910000

  • CBAM: carbon border adjustment Regulation (EU) 2023/956, Annex I 7606

    Sector: aluminium

    Read the act on EUR-Lex
  • Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 7606

    Art. 3i, goods generating significant revenue for Russia

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.

Tariff quotas for 7606910000

  • Open 09.6006 Origin: United Kingdom

    Aluminium products and articles of aluminium (excluding aluminium wire and aluminium foil) Aluminium wire Aluminium foil New description from 1/01/2027: Aluminium bars, rods and profiles; Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm; Aluminium foil

    Jan 1, 2026 – Dec 31, 2026

    67,854,080 Kilograms
    Balance left (94.2%)
    Volume 72,000,000

Source: European Commission, tariff quota reports, as of Oct 30, 2026. Balances change daily.

EU trade in 2025 for 7606910000

Extra-EU imports
€66.4M
19,272 t
Extra-EU exports
€139M

Top origin countries by import value

  1. Türkiye €55.3M
  2. China €4.8M
  3. Switzerland €1.2M
  4. United Kingdom €950.4K
  5. South Africa €901.7K

Figures for CN8 code 76069100. Source: Eurostat, Comext, CC BY 4.0, processed by hscode.info. Confidential trade is not allocated to codes.

Tariff changes for 7606910000 since 2016

  • Mar 2021 2 codes Code removed
  • Mar 2021 4 codes Code added

Month-by-month comparison of the European Commission’s TARIC extractions. Seasonal entry prices left out.

UK import duty for 760691

  • 6%

Third-country duties of all UK commodity codes under this HS subheading. Source: UK Department for Business and Trade, as of Nov 2, 2026. The UK tariff differs from the EU tariff.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 760691 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Other", it is crucial to have the correct HS code or TARIC code. The HS code 7606910000 10 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Other", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Other".
  2. Check if any additional licenses, permits, or certificates are required to import "Other" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Other" is 7606910000 10. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Other".

HS Code structure

76
Chapter
06
Heading
91
Subheading
00
CN Subheading
00
TARIC Subheading
10
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 76 was selected for aluminium and articles thereof

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 06 refers to Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm.

3. Subheading

The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 91 refers to Other.

HS Code tree structure

7600000000 80

Chapter ALUMINIUM AND ARTICLES THEREOF

7606000000 80

Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm

7606110000 10

- Rectangular (including square)

7606110000 80

- - Of aluminium, not alloyed

7606113000 80

- - - Aluminium Composite Panel

7606115000 10

- - - Other

7606115000 80

- - - - Painted, varnished or coated with plastics

7606115025 10

- - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft

7606115025 80

- - - - - - Not backed, without internal layers of other material

7606115030 80

- - - - - - Other

7606115086 10

- - - - - Other

7606115086 80

- - - - - - Not backed, without internal layers of other material

7606115089 80

- - - - - - Other

7606119100 10

- - - - Other, of a thickness of

7606119100 80

- - - - - Less than 3 mm

7606119125 10

- - - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft

7606119125 80

- - - - - - - Not backed, without internal layers of other material

7606119130 80

- - - - - - - Other

7606119186 10

- - - - - - Other

7606119186 80

- - - - - - - Not backed, without internal layers of other material

7606119189 80

- - - - - - - Other

7606119300 80

- - - - - Not less than 3 mm but less than 6 mm

7606119325 10

- - - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft

7606119325 80

- - - - - - - Not backed, without internal layers of other material

7606119330 80

- - - - - - - Other

7606119386 10

- - - - - - Other

7606119386 80

- - - - - - - Not backed, without internal layers of other material

7606119389 80

- - - - - - - Other

7606119900 80

- - - - - Not less than 6 mm

7606119925 10

- - - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft

7606119925 80

- - - - - - - Not backed, without internal layers of other material

7606119930 80

- - - - - - - Other

7606119986 10

- - - - - - Other

7606119986 80

- - - - - - - Not backed, without internal layers of other material

7606119989 80

- - - - - - - Other

7606120000 80

- - Of aluminium alloys

7606121100 10

- - - Beverage can body stock, end stock and tab stock

7606121100 80

- - - - Beverage can body stock

7606121900 80

- - - - Beverage can end stock and tab stock

7606123000 80

- - - Aluminium Composite Panel

7606125000 10

- - - Other

7606125000 80

- - - - Painted, varnished or coated with plastics

7606125023 10

- - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft

7606125023 20

- - - - - - Not backed, without internal layers of other material

7606125023 80

- - - - - - - Of a thickness of not less than 0,8 mm

7606125025 80

- - - - - - - Other

7606125030 80

- - - - - - Other

7606125085 10

- - - - - Other

7606125085 20

- - - - - - Not backed, without internal layers of other material

7606125085 80

- - - - - - - For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm

7606125087 10

- - - - - - - Other

7606125087 80

- - - - - - - - Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels

7606125088 80

- - - - - - - - Other

7606125089 80

- - - - - - Other

7606129200 10

- - - - Other, of a thickness of

7606129200 80

- - - - - Less than 3 mm

7606129223 10

- - - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft

7606129223 20

- - - - - - - Not backed, without internal layers of other material

7606129223 80

- - - - - - - - Of a thickness of not less than 0,8 mm

7606129225 80

- - - - - - - - In coils or in coiled strips in cut-to-length sheets, or in the form of circles

7606129227 80

- - - - - - - - Other

7606129230 80

- - - - - - - Other

7606129291 10

- - - - - - Other

7606129291 20

- - - - - - - Not backed, without internal layers of other material

7606129291 80

- - - - - - - - For use as body panels in the car industry or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm

7606129292 10

- - - - - - - - Other

7606129292 80

- - - - - - - - - Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels

7606129293 80

- - - - - - - - - In coils or in coiled strips in cut-to-length sheets, or in the form of circles; of a thickness of 0,2 mm or more

7606129294 80

- - - - - - - - - Other

7606129297 80

- - - - - - - Other

7606129300 80

- - - - - Not less than 3 mm but less than 6 mm

7606129310 80

- - - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft

7606129385 10

- - - - - - Other

7606129385 20

- - - - - - - Not backed, without internal layers of other material

7606129385 80

- - - - - - - - For use as body panels in the car industry or for use in the manufacture of aircraft parts

7606129386 80

- - - - - - - - In coils or in coiled strips, in cut-to-length sheets, or in the form of circles

7606129387 80

- - - - - - - - Other

7606129388 80

- - - - - - - Other

7606129900 80

- - - - - Not less than 6 mm

7606129910 80

- - - - - - Plates bearing a specific manufacture number, for use in certain types of aircraft

7606129921 10

- - - - - - Sheets of aluminium-lithium alloys

7606129921 20

- - - - - - - Not backed, without internal layers of other material

7606129921 80

- - - - - - - - For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts

7606129925 80

- - - - - - - - In plates, of a thickness of more than 6 mm

7606129929 80

- - - - - - - - Other

7606129930 80

- - - - - - - Other

7606129985 10

- - - - - - Other

7606129985 20

- - - - - - - Not backed, without internal layers of other material

7606129985 80

- - - - - - - - For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts

7606129986 80

- - - - - - - - In plates, of a thickness of more than 6 mm

7606129987 80

- - - - - - - - Other

7606129988 80

- - - - - - - Other

7606910000 10

- Other

7606910000 80

- - Of aluminium, not alloyed

7606910025 10

- - - Plates bearing a specific manufacture number, for use in certain types of aircraft

7606910025 80

- - - - Not backed, without internal layers of other material, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; - in plates, of a thickness exceeding 6 mm

7606910030 80

- - - - Other

7606910086 10

- - - Other

7606910086 80

- - - - Not backed, without internal layers of other material, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; - in plates, of a thickness exceeding 6 mm

7606910088 80

- - - - Other

7606920000 80

- - Of aluminium alloys

7606920023 10

- - - Plates bearing a specific manufacture number, for use in certain types of aircraft

7606920023 20

- - - - Not backed, without internal layers of other material, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; - in plates, of a thickness exceeding 6 mm

7606920023 80

- - - - - Of a thickness of not less than 0,8 mm, for use in the manufacture of aircraft parts

7606920025 80

- - - - - Other

7606920030 80

- - - - Other

7606920085 10

- - - Other

7606920085 20

- - - - Not backed, without internal layers of other material, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; - in plates, of a thickness exceeding 6 mm

7606920085 80

- - - - - For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm

7606920091 10

- - - - - Other

7606920091 80

- - - - - - Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels

7606920092 80

- - - - - - Other

7606920095 80

- - - - Other