Numéro tarifaire 3824990000 80 - autres

Règles d’origine préférentielles pour 3824990000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

• EU-Algeria Association Agreement · Algérie

  EU-Lebanon Association Agreement · Liban

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Egypt Association Agreement · Égypte

  EU-Morocco Association Agreement · Maroc

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading:

  – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Georgia DCFTA · Géorgie

  EU-Moldova DCFTA · Moldavie

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water-insoluble salts and their esters Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water-insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• Autonomous Trade Preferences (Western Balkans) · Kosovo

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  The following of this heading:

  - - / or: Prepared binders for foundry moulds or cores based on natural resinous products - - / or: Naphthenic acids, their water-insoluble salts and their esters - - / or: Sorbitol other than that of heading 2905 - - / or: Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts - - / or: Ion exchangers - - / or: Getters for vacuum tubes - - / or: Alkaline iron oxide for the purification of gas - - / or: Ammoniacal gas liquors and spent oxide produced in coal gas purification - - / or: Sulphonaphthenic acids, their water-insoluble salts and their esters - - / or: Fusel oil and Dippel's oil - - / or: Mixtures of salts having different anions - - / or: Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Chile Association Agreement · Chili

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: — The following of this heading: — — Prepared binders for foundry moulds or cores based on natural resinous products — — Naphthenic acids, their water-insoluble salts and their esters — — Sorbitol other than that of heading 2905 — — Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts — — Ion exchangers — — Getters for vacuum tubes — — Alkaline iron oxide for the purification of gas — — Ammoniacal gas liquors and spent oxide produced in coal gas purification — — Sulphonaphthenic acids, their water-insoluble salts and their esters — — Fusel oil and Dippel's oil — — Mixtures of salts having different anions — — Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions

  – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

  Biodiesel: mixtures of mono alkyl esters of the fatty acids of the long chain of sub products of vegetable and animal oils. For greater certainty, the mono alkyl ester makes reference to methyl ester or ethyl ester of fatty acids / or: Manufacture from materials of any heading, except that of the product, and in which all the materials of Chapter 15 used are wholly obtained [20]

  Other / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product [20] See Note 4 of Appendix 2 A.

• EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Îles Féroé, Liechtenstein, Norvège, Suisse

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel’s oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• EPA CARIFORUM

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: – The following of this heading Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EPA Eastern and Southern Africa

  – The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes

  Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel’s oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water insoluble salts and their esters – – Sorbitol other than that of heading No 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamine's; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatine, whether or not on a paper or textile backing / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EPA Pacific · Fidji, Îles Salomon, Papouasie-Nouvelle-Guinée, Samoa

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: – The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

  Miscellaneous chemical products; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Iceland FTA · Islande

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Jordan Association Agreement · Jordanie

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: - The following of this heading: - - Prepared binders for foundry moulds or cores based on natural resinous products - - Naphthenic acids, their water-insoluble salts and their esters - - Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product - - Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts - - Ion exchangers - - Getters for vacuum tubes - - Alkaline iron oxide for the purification of gas - - Ammoniacal gas liquors and spent oxide produced in coal gas purification - - Sulphonaphthenic acids, their water-insoluble salts and their esters - - Fusel oil and Dippel's oil - - Mixtures of salts having different anions - - Copying pastes with a basis of gelatin, whether or not on a paper or textile backing - Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie

  Miscellaneous chemical products; except for: / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

• EU-Korea FTA · Corée du Sud

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products

• EU-Central America Association Agreement

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  — The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Mexico Global Agreement · Mexique

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries; not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purifcation of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• Pan-Euro-Mediterranean (PEM) Convention · Albanie, Andorre, Bosnie-Herzégovine, Égypte, Îles Féroé, Islande, Kosovo, Liechtenstein, Macédoine du Nord, Monténégro, Norvège, Palestine, Suisse, Turquie

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – – Prepared binders for foundry moulds or cores based on natural resinous products

  – – Naphthenic acids, their water-insoluble salts and their esters

  – – Sorbitol other than that of heading 2905

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts

  – – Ion exchangers

  – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas

• EU-Palestine Interim Association Agreement · Palestine

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: - The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing - Other / or: Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product

• EU-Singapore FTA · Singapour

  Miscellaneous chemical products; except for: / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Tunisia Association Agreement · Tunisie

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water-insoluble salts and their esters Sorbitol other than that of heading 2905 Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water-insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Ukraine DCFTA · Ukraine

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 3824990000

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Règlements de classement de l’UE pour 3824990000

Règlements de la Commission qui ont classé des marchandises précises sous ce code. Ils lient les douanes de tous les États membres pour des marchandises identiques.

• 3824 99 92 31 juil. 2024 · Règlement sur EUR-Lex
  Le produit est un mélange liquide de substances chimiques, contenant en poids les éléments suivants:

  — 63 % de tétrahydro-1,1,2,3,3-pentaméthylindane (THPMI; CAS RN 33704-59-5), et — 34 % de hexahydro-1,1,2,3,3-pentaméthylindane (HHPMI; CAS RN 33704-60-8), et — 3 % de 1,1,2,3,3-pentaméthylindane (PMI; CAS RN 1203-17-4). Le mélange est obtenu par hydrogénation catalytique de PMI (matière de départ). Les produits formés lors de la réaction chimique sont le THPMI (produit principal) et le HHPMI (produit dérivé). Le mélange est destiné à être utilisé directement, sans purification, dans la production de (rac)-6,7-Dihydro-1,1,2,3,3-pentaméthyl-4(5H)-indanone (DPMI; CAS RN 33704-61-9) par oxydation allylique du THPMI.

  Motifs

  Le classement est déterminé par les dispositions des règles générales 1 et 6 pour l’interprétation de la nomenclature combinée, par la note 1, point a), du chapitre 29 et par le libellé des codes NC 3824 , 3824 99 et 3824 99 92 . En raison de la concentration importante de HHPMI, le produit est un mélange qui ne peut pas être considéré comme un composé organique de constitution chimique définie présenté isolément, constitué par une espèce moléculaire au sens de la note 1, point a), du chapitre 29 [voir les notes explicatives du système harmonisé relatives au chapitre 29, Considérations générales, point A), premier alinéa]. Il est dès lors exclu de classer le mélange dans le chapitre 29. Par conséquent, le mélange doit être classé sous le code NC 3824 99 92 en tant qu’autres préparations des industries chimiques ou des industries connexes, non dénommées ni comprises ailleurs.

• 3824 99 96 15 janv. 2024 · Règlement sur EUR-Lex
  Préparation constituée de 17 % en masse de nisine peptidique polycyclique mélangée à 83 % en masse de chlorure de sodium.

  Le chlorure de sodium est d’abord ajouté au cours d’une étape de purification du processus de production de la nisine. Lors d’une étape ultérieure, du chlorure de sodium est à nouveau ajouté, dans l’unique but de normaliser la préparation aux fins d’une activité antibiotique définie. La préparation est utilisée comme additif alimentaire pour prévenir toute prolifération bactérienne.

  Motifs

  Le classement est déterminé par les dispositions des règles générales 1 et 6 pour l’interprétation de la nomenclature combinée, par la note 1 du chapitre 29 et par le libellé des codes NC 3824 , 3824 99 et 3824 99 96 . Le chlorure de sodium contenu dans la préparation est ajouté à des fins de normalisation et non à des fins nutritionnelles. La préparation est utilisée comme additif alimentaire technique et n’est pas considérée comme un mélange de produits chimiques et de substances alimentaires ou d’autres substances ayant une valeur nutritive au sens de la note 1 b) du chapitre 38. Par conséquent, le classement en tant que préparation alimentaire de la position 2106 est exclu [voir la note explicative du système harmonisé (NESH) relative au chapitre 38, considérations générales, cinquième alinéa]. Le classement dans le chapitre 29 est exclu étant donné que le chlorure de sodium a été délibérément ajouté pour rendre la préparation particulièrement adaptée à une utilisation spécifique en tant qu’additif alimentaire ayant une activité antibiotique définie. De plus, le chlorure de sodium n’est pas une impureté résultant du processus de fabrication [voir la note 1 a) du chapitre 29 et la note explicative du SH relative au chapitre 29, considérations générales, point A), deuxième et cinquième alinéas]. Par conséquent, la préparation doit être classée sous le code NC 3824 99 96 en tant qu’autres préparations des industries chimiques ou des industries connexes, non dénommées ni comprises ailleurs (voir également, par analogie, l’avis de classement 3824.99/3 du système harmonisé).

Renseignements tarifaires du Royaume-Uni pour 3824990000

Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.

• UK 3824996400 Valable du 5 févr. 2025 au 4 févr. 2028 · Décision 600012290 sur GOV.UK

  A powder blend consisting of maltodextrin, gum acacia and guar gum, used as an excipient in the formulation and manufacture of solid oral dose tablets. Supplied in bulk packaging. Packaging consists of polyethylene resin bag placed inside a protective outer container, typically a cardboard box.

  Justification

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) Classification has been determined in accordance with the following: General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3824: Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included GIR 6 has been used to classify this product by the terms of heading 382499: Other than elsewhere specified within this heading. 8 Digit code 38249964: Products and preparations for pharmaceutical or surgical uses not elsewhere specified or included Also …

• UK 3824996400 Valable du 2 juin 2025 au 1 juin 2028 · Décision 600013269 sur GOV.UK

  Excipient blend. The product is a blend of excipients used by pharmaceutical and dietary supplement companies in the formation and manufacture of oral dose tablet cores. There is also an identical product (Placebo DT1) which has the exact composition and is used internally within the company to make placebo tablets for coating trials on medicaments and supplement tablets. The composition of both products are :- Emcocel 90m nf/ep/jp, Lactose monohyd. nf/ep/jp/cp, Starch 1500 partially pregelatinized maize starch, Purified stearic acid (veg.) pwdr, Cabosil m-5p (col.silicon diox.) nf/ep/jp/cp. The materials are blended together in a main manufacturing facility under Good Manufacturing Practice (GMP) conditions in accordance with the prescribed work instructions. The finished product is bulk packaging in a free-flowing powder form. Packaging consists of a polyethylene resin bag placed inside a protective outer container, typically a cardboard box. This product is not considered a medicament of heading 3003 or 3004

  Justification

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: GIR 1 has been used to classify this product by the terms of heading 3824: Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included. GIR 5b has been used to identify the type of packaging – Packaging consists of polyethylene resin bag placed inside a protective outer container, typically a cardboard box. GIR 6 has been used to classify this product by the terms of heading 382499: Other than elsewhere specified within this heading. 8-Digit code 38249964: Products and …

• UK 3824996500 Valable du 3 juil. 2024 au 2 juil. 2027 · Décision 600010485 sur GOV.UK

  A reddish coloured, powdered sand additive used in the cold box core process to eliminate veining defects in metal castings. The product is added to dry sand prior to the addition of resin. The material is supplied in 25kg bags, 500kg bags, 750kg bags and 1000kg bags.

  Justification

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect - a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3824 - prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included. GIR 5(b) has been used to identify the type of packaging: supplied in 25kg bags, 500kg bags, 750kg bags and 1000kg bags. GIR 6 has been used to classify the goods to subheading level - 382499 - other than elsewhere specified. 8 Digit Code: 38249965 – other than elsewhere specified or included. Also classified in accordance with HSENS to …

Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.

Restrictions et signalements pour 382499

• Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XXI 3824

  Art. 3 decies, biens qui procurent des recettes importantes à la Russie

  Lire l’acte sur EUR-Lex
• Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 3824

  Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie

  Lire l’acte sur EUR-Lex
• EUDR : produits sans déforestation Règlement (UE) 2023/1115, Annexe I 382499

  Produit de base : palmier à huile. uniquement le palmier à huile (Elaeis spp.). seulement une partie du code : Autres produits chimiques et préparations des industries chimiques ou des industries connexes (y compris ceux.... s'applique à partir du 30 décembre 2027

  Lire l’acte sur EUR-Lex
• Biens à double usage Règlement (UE) 2021/821, Annexe I 38249915

  Ne couvre qu’une partie des marchandises sous ce code (l’acte cite 38249915).

  Peut être à double usage ; vérifier l'entrée 0B001f, 1C450 b1 de l'annexe I (table de correspondance non contraignante)

  Lire l’acte sur EUR-Lex
• Biens à double usage Règlement (UE) 2021/821, Annexe I 38249950

  Ne couvre qu’une partie des marchandises sous ce code (l’acte cite 38249950).

  Peut être à double usage ; vérifier l'entrée 1C350 14, 1C350 24, 1C350 40, 1C350 41, 1C450 b1 de l'annexe I (table de correspondance non contraignante)

  Lire l’acte sur EUR-Lex
• Biens à double usage Règlement (UE) 2021/821, Annexe I 38249955

  Ne couvre qu’une partie des marchandises sous ce code (l’acte cite 38249955).

  Peut être à double usage ; vérifier l'entrée 1C450 b1 de l'annexe I (table de correspondance non contraignante)

  Lire l’acte sur EUR-Lex
• Biens à double usage Règlement (UE) 2021/821, Annexe I 38249986

  Ne couvre qu’une partie des marchandises sous ce code (l’acte cite 38249986).

  Peut être à double usage ; vérifier l'entrée 1C350 3, 1C450 b1 de l'annexe I (table de correspondance non contraignante)

  Lire l’acte sur EUR-Lex
• Biens à double usage Règlement (UE) 2021/821, Annexe I 38249992

  Ne couvre qu’une partie des marchandises sous ce code (l’acte cite 38249992).

  Peut être à double usage ; vérifier l'entrée 1C111, 1C233, 8C001, 1C350 1, 1C350 2, 1C350 3, 1C350 4, 1C350 5, 1C350 6, 1C350 7, 1C350 8, 1C350 9, 1C350 10, 1C350 11, 1C350 12, 1C350 13, 1C350 14, 1C350 15, 1C350 16, 1C350 17, 1C350 18, 1C350 19, 1C350 20, 1C350 21, 1C350 22, 1C350 23, 1C350 24, 1C350 25, 1C350 26, 1C350 27, 1C350 28, 1C350 29, 1C350 30, 1C350 31, 1C350 32, 1C350 33, 1C350 34, 1C350 35, 1C350 36, 1C350 37, 1C350 38, 1C350 39, 1C350 40, 1C350 41, 1C350 42, 1C350 43, 1C350 44, 1C350 45, 1C350 46, 1C350 47, 1C350 48, 1C350 49, 1C350 50, 1C350 51, 1C350 52, 1C350 53, 1C350 54, 1C450 b1, 1C350 55, 1C350 56, 1C350 57, 1C350 58, 1C350 59, 1C350 60, 1C350 61, 1C350 62, 1C350 63 de l'annexe I (table de correspondance non contraignante)

  Lire l’acte sur EUR-Lex
• Biens à double usage Règlement (UE) 2021/821, Annexe I 38249993

  Ne couvre qu’une partie des marchandises sous ce code (l’acte cite 38249993).

  Peut être à double usage ; vérifier l'entrée 1C107, 1C111, 1C233, 8C001, 1C350 1, 1C350 2, 1C350 3, 1C350 4, 1C350 5, 1C350 6, 1C350 7, 1C350 8, 1C350 9, 1C350 10, 1C350 11, 1C350 12, 1C350 13, 1C350 14, 1C350 15, 1C350 16, 1C350 17, 1C350 18, 1C350 19, 1C350 20, 1C350 21, 1C350 22, 1C350 23, 1C350 24, 1C350 25, 1C350 26, 1C350 27, 1C350 28, 1C350 29, 1C350 30, 1C350 31, 1C350 32, 1C350 33, 1C350 34, 1C350 35, 1C350 36, 1C350 37, 1C350 38, 1C350 39, 1C350 40, 1C350 41, 1C350 42, 1C350 43, 1C350 44, 1C350 45, 1C350 46, 1C350 47, 1C350 48, 1C350 49, 1C350 50, 1C350 51, 1C350 52, 1C350 53, 1C350 54, 1C450 b1, 1C350 55, 1C350 56, 1C350 57, 1C350 58, 1C350 59, 1C350 60, 1C350 61, 1C350 62, 1C350 63 de l'annexe I (table de correspondance non contraignante)

  Lire l’acte sur EUR-Lex
• Biens à double usage Règlement (UE) 2021/821, Annexe I 38249996

  Ne couvre qu’une partie des marchandises sous ce code (l’acte cite 38249996).

  Peut être à double usage ; vérifier l'entrée 1C107, 1C111, 1C233, 8C001, 1C350 1, 1C350 2, 1C350 3, 1C350 4, 1C350 5, 1C350 6, 1C350 7, 1C350 8, 1C350 9, 1C350 10, 1C350 11, 1C350 12, 1C350 13, 1C350 14, 1C350 15, 1C350 16, 1C350 17, 1C350 18, 1C350 19, 1C350 20, 1C350 21, 1C350 22, 1C350 23, 1C350 24, 1C350 25, 1C350 26, 1C350 27, 1C350 28, 1C350 29, 1C350 30, 1C350 31, 1C350 32, 1C350 33, 1C350 34, 1C350 35, 1C350 36, 1C350 37, 1C350 38, 1C350 39, 1C350 40, 1C350 41, 1C350 42, 1C350 43, 1C350 44, 1C350 45, 1C350 46, 1C350 47, 1C350 48, 1C350 49, 1C350 50, 1C350 51, 1C350 52, 1C350 53, 1C350 54, 1C450 b1, 1C350 55, 1C350 56, 1C350 57, 1C350 58, 1C350 59, 1C350 60, 1C350 61, 1C350 62, 1C350 63 de l'annexe I (table de correspondance non contraignante)

  Lire l’acte sur EUR-Lex

À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués. Le tableau des biens à double usage relie les codes aux entrées de la liste de contrôle et n’est pas contraignant.

Contingents tarifaires pour 382499

• Épuisé 09.2542 Origine: tous pays (erga omnes)

  Mixture containing bis[3-(triethoxysilyl)propyl]polysulfides (CAS RN 211519-85-6) with a purity by weight of 84 % or more

  1 janv. 2026 – 31 déc. 2026

  0 Kilograms

  Solde restant (0 %)

  Volume 2 000 000
• Ouvert 09.2568 Origine: tous pays (erga omnes)

  Mixture, in pellet form, containing by weight: – 49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (CAS RN 211519-85-6), and – 50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4), of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method)

  1 janv. 2026 – 31 déc. 2026

  287 300 Kilograms

  Solde restant (13,7 %)

  Volume 2 100 000
• Critique 09.2907 Origine: tous pays (erga omnes)

  Mixture of phytosterols, in the form of powder, containing by weight: – 75 % or more of sterols, – not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters

  1 janv. 2026 – 31 déc. 2026

  2 090 400 Kilograms

  Solde restant (83,6 %)

  Volume 2 500 000

Source : Commission européenne, rapports sur les contingents tarifaires, état au 30 oct. 2026. Les soldes changent chaque jour.

Commerce de l’UE en 2025 pour 382499

Importations extra-UE

4,1 Md €

1 331 268 t

Exportations extra-UE

7,3 Md €

Principaux pays d’origine selon la valeur importée

1. États-Unis 982,5 M €
2. Corée du Sud 858,9 M €
3. Chine 648,3 M €
4. Royaume-Uni 438,3 M €
5. Turquie 167,2 M €

Codes NC8 sous ce code : 20. Source : Eurostat, Comext, CC BY 4.0, traité par hscode.info. Le commerce confidentiel n’est pas attribué aux codes.

Changement du SH 2028

D’après les tables de correspondance de l’OMD du SH 2022 au SH 2028, à titre indicatif. L’UE fixe elle-même ses codes NC pour 2028.

Modifications tarifaires pour 382499 depuis 2016

• juil. 2026 3824999638 Code créé
• janv. 2026 5 codes Code supprimé
• janv. 2026 5 codes Code créé
• juil. 2025 3824999232 Code supprimé
• juil. 2025 5 codes Code créé
• avr. 2025 5 codes Code supprimé
• avr. 2025 3824999217 Code créé
• janv. 2025 19 codes Code supprimé
• janv. 2025 3 codes Code créé
• août 2024 2 codes Code créé
• juil. 2024 3824999372 Code supprimé
• juil. 2024 3824999271 Code créé

31 modifications antérieures. Comparaison mensuelle des extractions TARIC de la Commission européenne. Prix d’entrée saisonniers exclus.

Droit d’importation au Royaume-Uni pour 382499

• 0%
• 2%
• 4%
• 6%
• et plus

Droits de pays tiers de tous les codes britanniques sous cette sous-position du SH. Source : UK Department for Business and Trade, au 2 nov. 2026. Le tarif britannique diffère du tarif de l’UE.

TVA à l’importation dans l’UE

• Allemagne 19 %
• Autriche 20 % éventuellement 10 %
• Belgique 21 %
• Bulgarie 20 %
• Chypre 19 %
• Croatie 25 % éventuellement 5 %
• Danemark 25 %
• Espagne 21 %
• Estonie 24 %
• Finlande 25,5 %
• France 20 %
• Grèce 24 % éventuellement 6 %
• Hongrie 27 %
• Irlande 23 %
• Italie 22 %
• Lettonie 21 %
• Lituanie 21 %
• Luxembourg 17 %
• Malte 18 %
• Pays-Bas 21 %
• Pologne 23 %
• Portugal 23 %
• Roumanie 21 %
• Slovaquie 23 %
• Slovénie 22 % éventuellement 9,5 %
• Suède 25 %
• Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Informations

Structure du HS-Code

Arborescence HS-Code