Numéro tarifaire 3907300000 80 - Résines époxydes

Estimer le coût d’importation pour 390730

Simple estimation. La valeur en douane est le prix incluant le transport et l’assurance jusqu’à la frontière de l’UE. Les accises, autres redevances et droits antidumping propres à un producteur ne sont pas inclus. Les taux préférentiels exigent une preuve d’origine valable. Groupes de pays et exclusions : TARIC, au novembre 2026.

Mesures à l’exportation pour 3907300000

Ce qui s’applique quand ces marchandises quittent l’UE : contrôles à l’exportation, autorisations (biens à double usage et autres), interdictions par destination et unité supplémentaire de la déclaration d’exportation.

Contrôles et documents 4

	Destination	Début	Droit / Impôt	Base légale Type de mesure
1008	All third countries 1008	12-03-2025	Document requis interdit sans document Détails	Régulation0573/24 Export control of fluorinated greenhouse gases 765
1008	All third countries 1008	21-05-2026	Document requis interdit sans document Détails	Régulation1157/24 Export control - Waste 751
RU	Russian Federation RU	22-10-2025	Document requis interdit sans document Détails	Régulation0833/14 Export control 709
BY	Belarus BY	24-04-2026	Document requis interdit sans document Détails	Régulation0765/06 Export control 766

Historique

Règles d’origine préférentielles pour 3907300000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

• EU-Egypt Association Agreement · Égypte

  EU-Morocco Association Agreement · Maroc

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex3907 and 3912 for which the rules are set out below:

  – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

  – Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• Autonomous Trade Preferences (Western Balkans) · Kosovo

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex39 07 and 3912 for which the rules are set out below:

  - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of al the materials used does not exceed 25 % of the ex-works price of the product

  - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  - Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

  - Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EU-Canada CETA · Canada

  A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the net weight of non-originating material classified in the same heading as the final product does not exceed 50 per cent of the net weight of the product.

• EU-Chile Association Agreement · Chili

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex39 07 and 3912 for which the rules are set out below: — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  — Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

  — Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

  Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS); polyethers of subheading 3907.20 except polyacetals; epoxide resins of subheading 3907.30; polycarbonates of subheading 3907.40; unsaturated polyesters of subheading 3907.91 / or: Manufacture from materials of any heading / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  Other / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product, or Manufacture from polycarbonate of tetrabromo (bisphenol A) of subheading 3907.40 / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

• EU-Algeria Association Agreement · Algérie

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex3907 and 3912 for which the rules are set out below:

  – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product,

  and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

  – Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EPA CARIFORUM

  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product (e) – Polyester / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product [16]

  – Polyester / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: (a) LDCs Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [22] or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [23] or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  – Polyester / or: (a) LDCs Manufacture from materials of any heading, except that of the product or Manufacture from polycarbonate of tetrabromo-(bisphenol A) or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product or Manufacture from polycarbonate of tetrabromo-(bisphenol A) or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Jordan Association Agreement · Jordanie

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex 3907 and 3912 for which the rules are set out below: - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15] - Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EU-Japan EPA · Japon

  CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

• EU-Korea FTA · Corée du Sud

  Epoxide resins; polycarbonates / or: Manufacture from materials of any heading

• EU-Lebanon Association Agreement · Liban

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex3907 and 3912 for which the rules are set out below:

  – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

  – Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EU-Mexico Global Agreement · Mexique

  Polyacetals, other polyethers and epoxide resins, in primary forms, polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms — Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product [18] — Polyester / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials of Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A) — Other / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product [19] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Palestine Interim Association Agreement · Palestine

  Plastics in primary forms, waste, parings and scrap, of plastic; except for heading Nos ex 3907 and 3912 for which the rules are set out below: - Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product - Other / or: Manufacture in which the value of the materials of Chapter 39 used does not exceed 20% of the ex-works price of the product 1 / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

  - Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product 1 - Polyester / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EU-Singapore FTA · Singapour

  Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [21] or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  Polyester / or: Manufacture from materials of any heading, except that of the product or Manufacture from polycarbonate of tetrabromo-(bisphenol A) or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Tunisia Association Agreement · Tunisie

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex 3907 and 3912 for which the rules are set out below: Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15] Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 3907300000

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Renseignements tarifaires du Royaume-Uni pour 3907300000

Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.

• UK 3907300080 Valable du 21 mars 2025 au 20 mars 2028 · Décision 600011952 sur GOV.UK

  Bisphenol F epoxy resin Physical state: liquid It primarily used in high-end fields such as wind turbine blade prepreg, electronic encapsulation materials, vinyl resins, coatings, carbon fibre composites, inks, etc Material can be packed in drums, IBC`s or delivered in ISO tanks.

  Justification

  Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – in drums, IBC`s or delivered in ISO tanks. GIR 6 has been used to classify the goods to subheading level 390730 – Epoxide resins 10 digit code 3907300080 – Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on …

• UK 3907300080 Valable du 22 avr. 2025 au 21 avr. 2028 · Décision 600011953 sur GOV.UK

  Bisphenol F epoxy resin It primarily used in high-end fields such as wind turbine blade prepreg, electronic encapsulation materials, vinyl resins, coatings, carbon fibre composites, inks, etc Material can be packed in drums, IBC`s or delivered in ISO tanks.

  Justification

  Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – in drums, IBC`s or delivered in ISO tanks. GIR 6 has been used to classify the goods to subheading level 390730 – Epoxide resins 10 digit code 3907300080 – Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on …

• UK 3907300080 Valable du 21 mars 2025 au 20 mars 2028 · Décision 600011954 sur GOV.UK

  Bisphenol F Epoxy Resin Physical state: a liquid Primarily used in high-end fields such as wind turbine blade prepreg, electronic encapsulation materials, vinyl resins, coatings, carbon fibre composites, inks, etc Material can be packed in drums, IBC`s or delivered in ISO tanks

  Justification

  Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – in drums, IBC`s or delivered in ISO tanks. GIR 6 has been used to classify the goods to subheading level 390730 – Epoxide resins 10 digit code 3907300080 – Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on …

Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.

Restrictions et signalements pour 390730

• Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XXI 3907

  Art. 3 decies, biens qui procurent des recettes importantes à la Russie

  Lire l’acte sur EUR-Lex
• Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 3907

  Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie

  Lire l’acte sur EUR-Lex

À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.

Commerce de l’UE en 2025 pour 390730

Importations extra-UE

580,1 M €

147 320 t

Exportations extra-UE

672,2 M €

Principaux pays d’origine selon la valeur importée

1. Corée du Sud 165,2 M €
2. Suisse 163,1 M €
3. États-Unis 54,2 M €
4. Royaume-Uni 44,4 M €
5. Inde 34,9 M €

Codes NC8 sous ce code : 1. Source : Eurostat, Comext, CC BY 4.0, traité par hscode.info. Le commerce confidentiel n’est pas attribué aux codes.

Modifications tarifaires pour 390730 depuis 2016

• août 2024 3 codes Code supprimé
• août 2024 6 codes Code créé
• janv. 2023 3907300060 Code supprimé
• janv. 2019 3907300050 Code supprimé
• juil. 2018 3907300070 Code créé
• juil. 2016 2 codes Code créé

Comparaison mensuelle des extractions TARIC de la Commission européenne. Prix d’entrée saisonniers exclus.

Droit d’importation au Royaume-Uni pour 390730

• 0%
• 6%

Droits de pays tiers de tous les codes britanniques sous cette sous-position du SH. Source : UK Department for Business and Trade, au 2 nov. 2026. Le tarif britannique diffère du tarif de l’UE.

TVA à l’importation dans l’UE

• Allemagne 19 %
• Autriche 20 %
• Belgique 21 %
• Bulgarie 20 %
• Chypre 19 %
• Croatie 25 %
• Danemark 25 %
• Espagne 21 %
• Estonie 24 % éventuellement 9 %
• Finlande 25,5 %
• France 20 %
• Grèce 24 %
• Hongrie 27 %
• Irlande 23 %
• Italie 22 %
• Lettonie 21 %
• Lituanie 21 %
• Luxembourg 17 %
• Malte 18 %
• Pays-Bas 21 %
• Pologne 23 %
• Portugal 23 %
• Roumanie 21 %
• Slovaquie 23 %
• Slovénie 22 %
• Suède 25 %
• Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Informations

Structure du HS-Code

Arborescence HS-Code