Nouveau Décrivez un produit, obtenez le code NC. Aussi en API et MCP pour les agents IA. Essai gratuit
Aller au contenu

Numéro tarifaire 3919000000 80 - Plaques, feuilles, bandes, rubans, pellicules et autres formes plates, auto-adhésifs, en matières plastiques, même en rouleaux

M’alerter par e-mail

Restrictions commerciales pour l'importation de marchandises pour 3919000000 80

Cette table contient des informations sur les restrictions commerciales pour l'importation de marchandises dans l'UE et l'UE dans les pays tiers. Le tableau contient des informations sur les les restrictions commerciales dues à des unions douanières, des préférences, des quotas tarifaires, les unions douanières, les contrôles vétérinaires, les droits de douane des pays tiers et les quotas tarifaires non préférentiels quotas.

Droits 61
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Préférence tarifaire 142
BA
Bosnia and Herzegovina BA
01-01-2009
0 %
Préférence tarifaire 142
MK
North Macedonia MK
01-01-2009
0 %
Préférence tarifaire 142
UA
Ukraine UA
01-01-2016
0 %
Préférence tarifaire 142
2020
GSP - General arrangements 2020
01-01-2023
0 %
Préférence tarifaire 142
SG
Singapore SG
01-01-2027
0 %
Préférence tarifaire 142
XS
Serbia XS
01-02-2010
0 %
Préférence tarifaire 142
JP
Japan JP
01-02-2020
0 %
Préférence tarifaire 142
PE
Peru PE
01-03-2013
0 %
Préférence tarifaire 142
AL
Albania AL
01-04-2009
0 %
Préférence tarifaire 142
XK
Kosovo XK
01-04-2016
0 %
Préférence tarifaire 142
ME
Montenegro ME
01-05-2010
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Suspension tarifaire de la conformité aérienne 119
CH
Switzerland CH
20-12-1972
0 %
Préférence tarifaire 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Préférence tarifaire 142
FO
Faroe Islands FO
01-01-1997
0 %
Préférence tarifaire 142
XL
Melilla XL
01-01-1999
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Préférence tarifaire 142
AD
Andorra AD
01-01-2006
0 %
Droit de l'union douanière 106
SM
San Marino SM
01-01-2006
0 %
Droit de l'union douanière 106
TR
Türkiye TR
01-01-2006
0 %
Droit de l'union douanière 106
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Préférence tarifaire 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Préférence tarifaire 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Préférence tarifaire 142
EC
Ecuador EC
01-01-2017
0 %
Préférence tarifaire 142
GB
United Kingdom GB
01-01-2021
0 %
Préférence tarifaire 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Préférence tarifaire 142
GH
Ghana GH
01-01-2027
0 %
Préférence tarifaire 142
CL
Chile CL
01-02-2025
0 %
Préférence tarifaire 142
TN
Tunisia TN
01-03-1998
0 %
Préférence tarifaire 142
MA
Morocco MA
01-03-2000
0 %
Préférence tarifaire 142
LB
Lebanon LB
01-04-2006
0 %
Préférence tarifaire 142
JO
Jordan JO
01-05-2002
0 %
Préférence tarifaire 142
EG
Egypt EG
01-06-2004
0 %
Préférence tarifaire 142
XC
Ceuta XC
01-07-1991
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Préférence tarifaire 142
KR
Korea, Republic of (South Korea) KR
01-07-2014
0 %
Préférence tarifaire 142
MX
Mexico MX
01-07-2016
0 %
Préférence tarifaire 142
KE
Kenya KE
01-07-2024
0 %
Préférence tarifaire 142
US
United States US
01-07-2026
0 %
Préférence tarifaire 142
SY
Syria SY
01-08-1994
0 %
Préférence tarifaire 142
CO
Colombia CO
01-08-2013
0 %
Préférence tarifaire 142
2200
Central America 2200
01-08-2013
0 %
Préférence tarifaire 142
VN
Viet Nam VN
01-08-2020
0 %
Préférence tarifaire 142
DZ
Algeria DZ
01-09-2005
0 %
Préférence tarifaire 142
GE
Georgia GE
01-09-2014
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Préférence tarifaire 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Préférence tarifaire 142
CM
Cameroon CM
04-08-2014
0 %
Préférence tarifaire 142
1035
SADC EPA 1035
10-10-2016
0 %
Préférence tarifaire 142
ZA
South Africa ZA
10-10-2016
0 %
Préférence tarifaire 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Préférence tarifaire 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Préférence tarifaire 142
IL
Israel IL
16-05-2023
0 %
Préférence tarifaire 142
SB
Solomon Islands SB
17-05-2020
0 %
Préférence tarifaire 142
PG
Papua New Guinea PG
20-12-2009
0 %
Préférence tarifaire 142
FJ
Fiji FJ
28-07-2014
0 %
Préférence tarifaire 142
1033
CARIFORUM 1033
29-12-2008
0 %
Préférence tarifaire 142
WS
Samoa WS
31-12-2018
0 %
Préférence tarifaire 142
Contrôles et documents 4
RU
Russian Federation RU
19-12-2023
– 31-12-2027
Document requis
interdit sans document
Contrôle à l'importation 762
BY
Belarus BY
25-02-2025
Document requis
interdit sans document
Contrôle à l'importation 760
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 762
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 760

Explication des restrictions commerciales

Erga Omnes signifie "pour tous".

Les pays tiers sont des pays qui n'appartiennent pas à l'UE.

Le SPG signifie 'Système de préférences généralisées'.

Le SPG+ signifie 'Système de préférences généralisées Plus'.

European Economic Area (EEA) signifie tous les États membres de l'UE et l'Islande, le Liechtenstein et la Norvège.

Les PTOM sont des "Pays et territoires d'outre-mer". Ils ne sont pas membres de l'UE. Plus d'informations

'CARIFORUM est une organisation régionale d'intégration économique comprenant 15 États membres de la Communauté des Caraïbes (CARICOM) et la République dominicaine.'

'L'APE SADC signifie "Southern African Development Community - Economic Partnership Agreement" (Accord de partenariat économique).'

Droit signifie "droit de douane".

Estimer le coût d’importation pour 3919000000

  • Valeur en douane 1 000,00 €
  • Aucun droit des pays tiers n’est enregistré pour cette origine.
  • TVA à l’importation 20 % 200,00 €
  • Total 1 200,00 €

Peut être inférieur sous conditions :

  • Airworthiness tariff suspension: 0 %

Simple estimation. La valeur en douane est le prix incluant le transport et l’assurance jusqu’à la frontière de l’UE. Les accises, autres redevances et droits antidumping propres à un producteur ne sont pas inclus. Les taux préférentiels exigent une preuve d’origine valable. Groupes de pays et exclusions : TARIC, au novembre 2026.

Historique

Taux de droit et mesures pour ce code dans le temps (versions annuelles).

Règles d’origine préférentielles pour 3919000000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

  • EU-Egypt Association Agreement · Égypte

    EU-Morocco Association Agreement · Maroc

    Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

    – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Other:

    – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below:

    - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    - Other:

    - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading.

  • EU-Chile Association Agreement · Chili

    Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

    Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  • EU-Algeria Association Agreement · Algérie

    Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

    – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Other:

    – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product,

    and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EPA CARIFORUM

    Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – Other: – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: – the value of all the materials used does not exceed 50 % of the ex-works price of the product; – the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

    Semi-manufactures and articles of plastics; except for headings Nos ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

    – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Other:

    – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

    Plastics and articles thereof; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Jordan Association Agreement · Jordanie

    Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Other: - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Japan EPA · Japon

    CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Korea FTA · Corée du Sud

    Plastics in primary forms, waste, parings and scrap, of plastic; semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Central America Association Agreement

    Semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Lebanon Association Agreement · Liban

    Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

    – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Other:

    – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Mexico Global Agreement · Mexique

    Semi-manufactures and articles of plastics; except for headings Nos ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 50 % of the ex-works price of the product [23] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [24] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product [25] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked - Other: / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product 1 / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

  • EU-Singapore FTA · Singapour

    Plastics and articles thereof: except for: / or: Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EU-Tunisia Association Agreement · Tunisie

    Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 3919000000

3919 Notes explicatives de la nomenclature combinée: Plaques, feuilles, bandes, rubans, pellicules et autres formes plates, auto-adhésifs, en matières plastiques, même en rouleaux

Pour l'interprétation du terme «auto-adhésif», voir les notes explicatives SH, no 3919, premier alinéa. Ne relèvent pas de cette position les formes plates en matières plastiques, qui adhèrent seulement à des surfaces lisses telles que le verre. Les produits de cette position comportent fréquemment une bande ou une feuille protectrice en papier ou en matières plastiques. La présence d'une telle bande ou feuille protectrice est sans influence sur le classement.

3919 10 12 - 3919 10 19 Notes explicatives de la nomenclature combinée: à 3919 10 19

Bandes dont l'enduit consiste en caoutchouc, naturel ou synthétique, non vulcanisé Ne relèvent des présentes sous-positions que les bandes autocollantes à usage d'adhésifs, c'est-à-dire les bandes reconnaissables comme étant conçues exclusivement ou principalement comme moyen de fixation. Ces bandes sont en général utilisées pour l'emballage des marchandises et usages similaires.

3919 10 12 - 3919 10 80 Notes explicatives de la nomenclature combinée: à 3919 10 80

en rouleaux d'une largeur n'excédant pas 20 cm Entrent également dans ces sous-positions les bandes adhésives munies d'une languette (tirant) et montées sur un porte-rouleau qui sert principalement comme conditionnement de vente au détail et qui, en général, n'est pas réemployé après épuisement de la bande.

Notes du chapitre 39

Notes 1. Dans la nomenclature, on entend par «matières plastiques» les matières des nos 3901 à 3914 qui, lorsqu'elles ont été soumises à une influence extérieure (généralement la chaleur et la pression avec, le cas échéant, l'intervention d'un solvant ou d'un plastifiant), sont susceptibles ou ont été susceptibles, au moment de la polymérisation ou à un stade ultérieur, de prendre par moulage, coulage, profilage, laminage ou tout autre procédé, une forme qu'elles conservent lorsque cette influence a cessé de s'exercer. Dans la nomenclature, l'expression «matières plastiques» couvre également la fibre vulcanisée. Ces termes ne s'appliquent toutefois pas aux matières à considérer comme des matières textiles de la section XI. 2. Le présent chapitre ne comprend pas: a) les préparations lubrifiantes des nos 2710 ou 3403; b) les cires des nos 2712 ou 3404; c) les composés organiques isolés de constitution chimique définie (chapitre 29); d) l'héparine et ses sels (no 3001); e) les solutions (autres que les collodions), dans des solvants organiques volatils, de produits visés dans les libellés des nos 3901 à 3913 lorsque la proportion du solvant excède 50 % du poids de la solution (no 3208); les feuilles pour le marquage au fer du no 3212; f) les agents de surface organiques et les préparations du no 3402; g) les gommes fondues et les gommes esters (no 3806); h) les additifs préparés pour huiles minérales (y compris l'essence) et pour autres liquides utilisés aux mêmes fins que les huiles minérales (no 3811); ij) les liquides hydrauliques préparés à base de polyglycols, de silicones et autres polymères du chapitre 39 (no 3819); k) les réactifs de diagnostic ou de laboratoire sur un support en matière plastique (no 3822); l) le caoutchouc synthétique, tel qu'il est défini au chapitre 40, et les ouvrages en caoutchouc synthétique; m) les articles de sellerie ou de bourrellerie (no 4201), les malles, valises, mallettes, sacs à main et autres contenants du no 4202; n) les ouvrages de sparterie ou de vannerie, du chapitre 46; o) les revêtements muraux du no 4814; p) les produits de la section XI (matières textiles et ouvrages en ces matières); q) les articles de la section XII (chaussures et parties de chaussures, coiffures et parties de coiffures, parapluies, parasols, cannes, fouets, cravaches et leurs parties, par exemple); r) les articles de bijouterie de fantaisie du no 7117; s) les articles de la section XVI (machines et appareils, matériel électrique); t) les parties du matériel de transport de la section XVII; u) les articles du chapitre 90 (éléments d'optique, montures de lunettes, instruments de dessin, par exemple); v) les articles du chapitre 91 (boîtes de montres, cages et cabinets de pendules ou d'appareils d'horlogerie, par exemple); w) les articles du chapitre 92 (instruments de musique et leurs parties, par exemple); x) les articles du chapitre 94 (meubles, luminaires et appareils d'éclairage, enseignes lumineuses, constructions préfabriquées, par exemple); y) les articles du chapitre 95 (jouets, jeux, engins sportifs, par exemple); z) les articles du chapitre 96 (brosses, boutons, fermetures à glissière, peignes, embouts et tuyaux de pipes, fume-cigarettes ou similaires, parties de bouteilles isolantes, stylos, porte-mine et monopodes, bipieds, trépieds et articles similaires, par exemple). 3. N'entrent dans les nos 3901 à 3911 que les produits obtenus par voie de synthèse chimique et relevant des catégories ci-après: a) les polyoléfines synthétiques liquides dont moins de 60 % en volume distillent à 300 degrés Celsius rapportés à 1 013 millibars par application d'une méthode de distillation à basse pression (nos 3901 et 3902); b) les résines faiblement polymérisées du type coumarone-indène (no 3911); c) les autres polymères synthétiques comportant au moins 5 motifs monomères, en moyenne; d) les silicones (no 3910); e) les résols (no 3909) et les autres prépolymères. 4. On entend par «copolymères» tous les polymères dans lesquels la part d'aucun motif monomère ne représente 95 % ou davantage en poids de la teneur totale du polymère. Sauf dispositions contraires, au sens du présent chapitre, les copolymères (y compris les copolycondensats, les produits de copolyaddition, les copolymères en bloc et les copolymères greffés) et les mélanges de polymères relèvent de la position couvrant les polymères du motif comonomère qui prédomine en poids sur tout autre motif comonomère simple. Au sens de la présente note, les motifs comonomères constitutifs de polymères qui relèvent d'une même position doivent être pris ensemble. Si aucun motif comonomère simple ne prédomine, les copolymères ou mélanges de polymères sont classés, selon le cas, dans la position placée la dernière par ordre de numérotation parmi celles susceptibles d'être valablement prises en considération. 5. Les polymères modifiés chimiquement, dans lesquels seuls les appendices de la chaîne polymérique principale ont été modifiés par réaction chimique, sont à classer dans la position afférente au polymère non modifié. Cette disposition ne s'applique pas aux copolymères greffés. 6. Au sens des nos 3901 à 3914, l'expression «formes primaires» s'applique uniquement aux formes ci-après: a) liquides et pâtes, y compris les dispersions (émulsions et suspensions) et les solutions; b) blocs irréguliers, morceaux, grumeaux, poudres (y compris les poudres à mouler), granulés, flocons et masses non cohérentes similaires. 7. Le no 3915 ne comprend pas les déchets, débris et rognures d'une seule matière thermoplastique transformés en formes primaires (nos 3901 à 3914). 8. Au sens du no 3917, les termes «tubes et tuyaux» s'entendent des produits creux, qu'il s'agisse de demi-produits ou de produits finis (les tuyaux d'arrosage nervurés, les tubes perforés, par exemple) des types utilisés généralement pour acheminer, conduire ou distribuer des gaz ou des liquides. Ces termes s'entendent également des enveloppes tubulaires pour saucisses ou saucissons et autres tubes et tuyaux plats. Toutefois, à l'exception des derniers cités, ceux qui ont une section transversale intérieure autre que ronde, ovale, rectangulaire (la longueur n'excédant pas une fois et demie la largeur) ou en forme de polygone régulier ne sont pas à considérer comme «tubes et tuyaux» mais comme «profilés». 9. Au sens du no 3918, les termes «revêtements de murs ou de plafonds en matières plastiques» s'entendent des produits présentés en rouleaux d'une largeur minimale de 45 centimètres, susceptibles d'être utilisés pour la décoration des murs ou des plafonds, constitués par de la matière plastique fixée de manière permanente sur un support en une matière autre que le papier, la couche de matière plastique (de la face apparente) étant grainée, gaufrée, coloriée, imprimée de motifs ou autrement décorée. 10. Au sens des nos 3920 et 3921, l'expression «plaques, feuilles, pellicules, bandes et lames» s'applique exclusivement aux plaques, feuilles, pellicules, bandes et lames (autres que celles du chapitre 54) et aux blocs de forme géométrique régulière, même imprimés ou autrement travaillés en surface, non découpés ou simplement découpés de forme carrée ou rectangulaire mais non autrement travaillés (même si cette opération leur donne le caractère d'articles prêts à l'usage). 11. Le no 3925 s'applique exclusivement aux articles ci-après pour autant qu'ils ne soient pas couverts par les positions précédentes du sous-chapitre II: a) réservoirs, citernes (y compris les fosses septiques), cuves et récipients analogues, d'une contenance excédant 300 litres; b) éléments structuraux utilisés notamment pour la construction des sols, des murs, des cloisons, des plafonds ou des toits; c) gouttières et leurs accessoires; d) portes, fenêtres et leurs cadres, chambranles et seuils; e) rambardes, balustrades, rampes et barrières similaires; f) volets, stores (y compris les stores vénitiens) et articles similaires, et leurs parties et accessoires; g) rayonnages de grandes dimensions destinés à être montés et fixés à demeure dans les magasins, ateliers, entrepôts, par exemple; h) motifs décoratifs architecturaux, notamment les cannelures, coupoles, colombiers; ij) accessoires et garnitures destinés à être fixés à demeure aux portes, fenêtres, escaliers, murs ou autres parties de bâtiment, notamment les boutons, les poignées, les crochets, les supports, les porte-serviettes, les plaques d'interrupteurs et autres plaques de protection. Notes de sous-positions 1. À l'intérieur d'une position du présent chapitre, les polymères (y compris les copolymères) et les polymères modifiés chimiquement sont à classer conformément aux dispositions ci-après: a) lorsqu'il existe une sous-position dénommée «autres» dans la série des sous-positions en cause: 1) le préfixe «poly» précédant le nom d'un polymère spécifique dans le libellé d'une sous-position (polyéthylène ou polyamide-6,6, par exemple) signifie que le ou les motifs monomères constitutifs du polymère désigné, pris ensemble, doivent contribuer pour 95 % ou davantage en poids à la teneur totale du polymère; 2) les copolymères cités dans les nos 3901 30, 3901 40, 3903 20, 3903 30 et 3904 30 sont à classer dans ces sous-positions, à condition que les motifs comonomères des copolymères mentionnés contribuent pour 95 % ou davantage en poids à la teneur totale du polymère; 3) les polymères modifiés chimiquement sont à classer dans la sous-position dénommée «autres», pour autant que ces polymères modifiés chimiquement ne soient pas repris plus spécifiquement dans une autre sous-position; 4) les polymères qui ne répondent pas aux conditions stipulées aux points 1, 2 ou 3 ci-dessus sont à classer dans la sous-position, parmi les sous-positions restantes de la série, couvrant les polymères du motif monomère qui prédomine en poids sur tout autre motif comonomère simple. À cette fin, les motifs monomères constitutifs de polymères qui relèvent de la même sous-position doivent être pris ensemble. Seuls les motifs comonomères constitutifs de polymères de la série de sous-positions en cause doivent être comparés; b) lorsqu'il n'existe pas de sous-position dénommée «autres» dans la même série: 1) les polymères sont à classer dans la sous-position couvrant les polymères du motif monomère qui prédomine en poids sur tout autre motif comonomère simple. À cette fin, les motifs monomères constitutifs de polymères qui relèvent de la même sous-position doivent être pris ensemble. Seuls les motifs comonomères constitutifs de polymères de la série en cause doivent être comparés; 2) les polymères modifiés chimiquement sont à classer dans la sous-position afférente au polymère non modifié. Les mélanges de polymères sont à classer dans la même sous-position que les polymères obtenus à partir des mêmes motifs monomères dans les mêmes proportions. 2. Aux fins du no 3920 43, le terme «plastifiants» couvre également les plastifiants secondaires. Note complémentaire 1. Le chapitre 39 comprend les gants, mitaines et moufles imprégnés, enduits ou recouverts de matière plastique alvéolaire, qu'ils soient confectionnés: — en tissus, en étoffes de bonneterie (autres que ceux du no 5903), feutres ou nontissés imprégnés, enduits ou recouverts de matière plastique alvéolaire, ou — en tissus, en étoffes de bonneterie, feutres ou nontissés non imprégnés, ni enduits ni recouverts et qu'ils soient ensuite imprégnés, enduits ou recouverts de matière plastique alvéolaire, pour autant que ces tissus, étoffes de bonneterie, feutres ou nontissés ne servent que de support [note 3, point c), au chapitre 56 et note 2, point a) 5, au chapitre 59].

Notes de la section VII

MATIÈRES PLASTIQUES ET OUVRAGES EN CES MATIÈRES; CAOUTCHOUC ET OUVRAGES EN CAOUTCHOUC Notes 1. Les produits présentés en assortiments consistant en plusieurs éléments constitutifs distincts relevant en totalité ou en partie de la présente section et reconnaissables comme étant destinés, après mélange, à constituer un produit des sections VI ou VII, sont à classer dans la position afférente à ce dernier produit, sous réserve que ces éléments constitutifs soient: a) en raison de leur conditionnement, nettement reconnaissables comme étant destinés à être utilisés ensemble sans être préalablement reconditionnés; b) présentés en même temps; c) reconnaissables, de par leur nature ou leurs quantités respectives, comme complémentaires les uns des autres. 2. À l'exception des articles des nos 3918 ou 3919, relèvent du chapitre 49 les matières plastiques, le caoutchouc et les ouvrages en ces matières revêtus d'impressions ou d'illustrations n'ayant pas un caractère accessoire par rapport à leur utilisation initiale.

Autres notes explicatives du chapitre

Considérations générales La note explicative du SH relative au chapitre 39, Considérations générales, “Matières plastiques combinées à des matières autres que des matières textiles”, point d), s'applique mutatis mutandis aux combinaisons de fibres de carbone et de matières plastiques.

Note 4 Calcul des rapports de masses des motifs comonomères dans les copolymères: Les rapports de masses des différents motifs comonomères présents dans les chaînes de copolymères sont calculés sur la base de la structure moléculaire du copolymère (et non de celle des produits de départ), en tenant compte de la réaction de formation du polymère. En conséquence, l’atome reliant deux unités monomères adjacentes est attribué à l’unité monomère de laquelle l’atome provient. Les exemples suivants illustrent le calcul des rapports de masses des motifs comonomères dans les copolymères: — dans le poly(éthylène téréphtalate), qui est un polyester composé d’acide téréphtalique et d’éthylène glycol, les deux atomes d’oxygène proviennent de l’unité monomère du glycol. Par conséquent, la contribution du motif monomère de l’éthylène glycol est calculée à partir de la formule C2H4O2, et celle du téréphtalate est calculée à partir de la formule C8H4O2; — dans le polyamide-6,6, qui est un polyamide composé d’hexaméthylènediamine et d’acide adipique, les deux atomes d’azote proviennent de l’unité monomère de la diamine. Par conséquent, la contribution du motif monomère de l’hexaméthylènediamine est calculée à partir de la formule C6H14N2, et celle de l’acide adipique est calculée à partir de la formule C6H8O2.

Note 6 Le mot «solutions» employé dans la présente note ainsi que dans la note 4 du chapitre 32 ne comprend pas les solutions colloïdales

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Renseignements tarifaires du Royaume-Uni pour 3919000000

Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.

  • UK 3919108090 Valable du 3 janv. 2024 au 2 janv. 2027 · Décision 600008917 sur GOV.UK

    Self adhesive tape coated in acrylic resin glue, used for protection on carpet. Packaged in 100mm x 10m size. Made from LLDPE and LDPE with glue. Packed in 24 rolls per cardboard box, and 30 boxes per pallet.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5(b) has been used to identify the type of packaging as cardboard boxes in pallets. GIR 6 has been used to classify the goods to subheading level 391910 – In rolls of a width not exceeding 20 cm 8 digit code 39191080 - Other than strips, the coating of which consists of unvulcanised natural or synthetic rubber 10 digit code 3919108090 – Other than elsewhere specified Also Classified in accordance with: Harmonised System …

  • UK 3919108090 Valable du 22 mars 2024 au 21 mars 2027 · Décision 600008918 sur GOV.UK

    Cloth tape made of low-density polyethylene film. The size of each roll is 50mm x 45m. The tape is not coated in either unvulcanised, natural, or synthetic rubber, plastic covers the top layer of fabric and glue. Can be used as hard-wearing lasting security, both indoors and outdoors, Available in packs of 24 in black.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify the goods to subheading level 391910 – In rolls of a width not exceeding 20 cm 8 digit code 39191080 - Other than strips, the coating of which consists of unvulcanised natural or synthetic rubber 10 digit code 3919108090 – Other than elsewhere specified Also Classified in accordance with: Harmonised System Explanatory Notes (HSENs) to heading 3919

  • UK 3919108090 Valable du 18 janv. 2024 au 17 janv. 2027 · Décision 600009256 sur GOV.UK

    The product is glass safe tape and is blue in colour. It measures 100 millimetres x 100 millimetres and is 50 micron. The width is 10 centimetres. It is made of Polypropylene. It is not self-adhesive on both sides. It is packaged 30 boxes per pallet and then 24 rolls per box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. GIR 5(b) has been used to identify the type of packaging. It is packaged in a blister pack with a cardboard back. GIR 6 has been used to classify the goods to subheading level 391910 - In rolls of a width not exceeding 20cm. 8 Digit Code 39191080 - Other than strips, the coating of which consists of unvulcanised natural or synthetic rubber. 10 Digit Code 3919108090 - Other than for use in certain types of aircraft; other elsewhere …

+ 25 de plus
  • UK 3919108090 Valable du 21 févr. 2024 au 20 févr. 2027 · Décision 600009617 sur GOV.UK

    Product is a roll of black duct tape. It comprises of 3 layers. The top layer of the Duct tape is a melted layer of polyethylene plastic which makes the material waterproof. This layer makes up 40% of the tape. Below it is a layer of thin PE fabric (which makes up 30% of the tape) with a rubber-based adhesive layer (which makes up 30% of the tape). All materials are bonded together by the resin melted coating. The plastic top layer is visible to the naked eye. The tape is 0.26mm thick, is 50mm wide and is 50m long. Packaged in a 12x12x21 cm pack and weighs 1.8 Kilogram (kg).

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (reg 3 (1)(a)); and b. Notes to a section of chapter of the Goods Classification Table (reg 3(1)(b)). General Interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 3B - has been used as the polyethylene coating considered to be the essential character. GIR 5b - has been used to identify the type of packaging as in a 12x12x21 cm pack which weighs 1.8kg. GIR 6 - has been used to classify the goods to subheading level 391910 In rolls of a width not exceeding 20cm 8 Digit Code 39191080 Other than strips, the coating of which consists of unvulcanised natural or synthetic rubber. 10 Digit Code …

  • UK 3919108090 Valable du 14 mars 2025 au 13 mars 2028 · Décision 600012524 sur GOV.UK

    Self adhesive tape measuring 38mm x 3.8metre. This is used for sealing drafts or leaking gaps. There are two rolls of tape to a pack.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the packaging GIR 6 has been used to classify the goods to subheading level 391910 – In rolls of a width not exceeding 20 cm 8 digit code 39191080 - Other than strips, the coating of which consists of unvulcanised natural or synthetic rubber 10 digit code 3919108090 – Other than elsewhere specified Also Classified in accordance with: Harmonised System Explanatory Notes (HSENs) to heading 3919

  • UK 3919108090 Valable du 7 mai 2025 au 6 mai 2028 · Décision 600013049 sur GOV.UK

    A roll of vinyl reflective tape, this is 5cm wide . This is to be applied to garments for visibility .The product is sold in 100m rolls, imported in boxes of 38.The product is applied using a heat seal process

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (reg 3 (1)(a)); and b. Notes to a section of chapter of the Goods Classification Table (reg 3(1)(b)). General Interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 3919 Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b - has been used to identify the type of packaging as in a pack of 3. GIR 6 - has been used to classify the goods to subheading level 391910 In rolls of a width not exceeding 20cm. 8 Digit Code 39191080 Other than strips, the coating of which consists of unvulcanised natural or synthetic rubber 10 Digit Code 3919108090 Other than for use in certain types of aircraft; Other than elsewhere specified Also classified in accordance …

  • UK 3919108090 Valable du 1 oct. 2025 au 30 sept. 2028 · Décision 600013882 sur GOV.UK

    Double-Sided Sticky Tape Strong, reusable, double-sided tape that instantly holds anything in place. Washable & reusable Works on smooth surfaces of ceramic, tile, wood, marble, glass, plastic and more. Composition: Acrylic, Plastic, Polyethylene Terephthalate In rolls. Width 5cms Weight 330g

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify the goods to subheading level 391910 - In rolls of a width not exceeding 20 cm 8 Digit Code 39191080 – Other than Strips, the coating of which consists of unvulcanised natural or synthetic rubber 10 Digit Code 3919108090 – Other than elsewhere specified Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most …

  • UK 3919108090 Valable du 5 mai 2026 au 4 mai 2029 · Décision 600015368 sur GOV.UK

    1m x 30mm nano gel double -sided clear tape. Polyurethane gel, packaged in a blue box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging - blue box. GIR 6 has been used to classify the goods to subheading level 391910 - In rolls of a width not exceeding 20 cm 8 Digit Code 39191080 – Other than Strips, the coating of which consists of unvulcanised natural or synthetic rubber 10 Digit Code 3919108090 – Other than elsewhere specified Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory …

  • UK 3919108090 Valable du 15 avr. 2026 au 14 avr. 2029 · Décision 600015369 sur GOV.UK

    Insulation Tape. Pack of two black insulation tapes. 15m x 18mm per roll. Made of PVC. Packaged on a blue card.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging - blue card. GIR 6 has been used to classify the goods to subheading level 391910 - In rolls of a width not exceeding 20 cm 8 Digit Code 39191080 – Other than Strips, the coating of which consists of unvulcanised natural or synthetic rubber 10 Digit Code 3919108090 – Other than elsewhere specified Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory …

  • UK 3919108090 Valable du 15 avr. 2026 au 14 avr. 2029 · Décision 600015370 sur GOV.UK

    Insulation Tape. Pack of six in colours green, white, blue, yellow, red and black insulation tapes. 2.7m x 18mm per roll. Made of PVC. Packaged on a blue card.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging - blue card. GIR 6 has been used to classify the goods to subheading level 391910 - In rolls of a width not exceeding 20 cm 8 Digit Code 39191080 – Other than Strips, the coating of which consists of unvulcanised natural or synthetic rubber 10 Digit Code 3919108090 – Other than elsewhere specified Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory …

  • UK 3919908030 Valable du 2 févr. 2026 au 1 févr. 2029 · Décision 600014864 sur GOV.UK

    Reflecting laminated sheet Consisting of a film of polycarbonate embossed on one side with a regular pattern. It is covered on one side with a layer of acrylic polymers and on other side with multiple layers of polymer. One is covered with self adhesive layer and a release sheet In rolls of 4 sizes(24inch, 30inch, 36inch, 48inch) by 50yards It is packaged in individual triwalled cardboard boxes

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging – individual triwalled cardboard boxes GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 digit code 3919908030 – Reflecting sheet: - of a polycarbonate or acrylic polymer film …

  • UK 3919908030 Valable du 2 févr. 2026 au 1 févr. 2029 · Décision 600014865 sur GOV.UK

    Reflecting laminated sheet consisting of a sheet of polycarbonate embossed on one side with a pyrimidal pattern. It has an out coating on one side of acrylic polymers and the other with multilayers of polymers. One is self-adhesive with a release sheet. product come in rolls of a width exceeding 20cm packaged in individual triwalled cardboard boxes

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging – individual triwalled cardboard boxes GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 digit code 3919908030 – Reflecting sheet: - of a polycarbonate or acrylic polymer film …

  • UK 3919908049 Valable du 2 févr. 2026 au 1 févr. 2029 · Décision 600014867 sur GOV.UK

    Multi layered self adhesive sheeting The sheeting consists of polymethylmethacrylate glass beads, a layer of aluminum and self adhesive layer The sheeting is presented in rolls of a width exceeding 20cm in various colours It is packaged in triwalled cardboards boxes

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging – packaged in cardboards boxes GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 digit code 3919908049 – Reflecting laminated sheet consisting of a film of poly(methyl …

  • UK 3919908053 Valable du 11 avr. 2024 au 10 avr. 2027 · Décision 600010252 sur GOV.UK

    Double-Sided, Acrylic Foam Tape Acrylic foam core covered on both sides with an acrylic adhesive with a release liner on one side In rolls Thickness: 0.5 to 2mm Width: 700 and 800mm Use: Automotive industry

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 digit code 3919908053 – Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic …

  • UK 3919908053 Valable du 13 sept. 2024 au 12 sept. 2027 · Décision 600011294 sur GOV.UK

    Double-sided acrylic foam adhesive tapes intended for use in the automotive industry and other industrial environments as a replacement for mechanical fasteners such as rivets, welds or screws. They are covered on both sides with a pressure sensitive acrylic-based adhesive and on one side with a release sheet.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product to Heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify this product to sub-heading level 391990 - Other than in rolls of a width not exceeding 20 cm Eight Digit Code - 39199080 Other than Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers Ten Digit Code - 3919908053 Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic …

  • UK 3919908099 Valable du 20 déc. 2023 au 19 déc. 2026 · Décision 600008916 sur GOV.UK

    Self-adhesive protective film intended for use on carpets to protect from spillages or dirt. Available in multiple sizes, in rolls exceeding 20cms. Made from low-density polyethylene and linear low-density polyethylene. The product is coated in acrylic resin glue and sold in rolls.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm. 8-digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10-digit code 3919908099 - Other than elsewhere specified Also classified in accordance with: HSEN to 3919

  • UK 3919908099 Valable du 20 déc. 2023 au 19 déc. 2026 · Décision 600009254 sur GOV.UK

    Self-adhesive glass protective film intended for use on glass as a barrier to protect from paint splashes, dust or dirt. Available in two sizes, in rolls exceeding 20cms. Made from low-density polyethylene and linear low-density polyethylene with red pigment. The product is coated in acrylic resin glue and sold in rolls. Product available with blue or clear tint.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm. 8-digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10-digit code 3919908099 - Other than elsewhere specified Also classified in accordance with: HSEN to 3919

  • UK 3919908099 Valable du 20 déc. 2023 au 19 déc. 2026 · Décision 600009255 sur GOV.UK

    Self-adhesive protective film intended for use on surfaces to protect from spills, scratches or dirt. Sold in rolls exceeding 20cms. Made from low-density polyethylene and linear low-density polyethylene with either clear or blue pigment. The product is coated in acrylic resin glue and sold in rolls.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm. 8-digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10-digit code 3919908099 - Other than elsewhere specified Also classified in accordance with: HSEN to 3919

  • UK 3919908099 Valable du 4 déc. 2023 au 3 déc. 2026 · Décision 600009327 sur GOV.UK

    Self-adhesive plastic film Polyurethane film coated on one side with a pressure sensitive acrylic adhesive with a paper liner Use: to create surgical dressings for the management of wounds, and for the protection of intact skin Packaging: On rolls with a width of 27.2cm and length of 914.4m in protective plastic sheeting

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging – On rolls with a width of 27.2cm and length of 914.4m in protective plastic sheeting GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 digit code 3919908099 – Other than …

  • UK 3919908099 Valable du 5 janv. 2024 au 4 janv. 2027 · Décision 600009373 sur GOV.UK

    Self-adhesive protective film intended for protecting from spills, dirt and contamination from foot traffic. Heavy duty film, available in different sized rolls made from low-density polyethylene and linear low-density polyethylene. The product is coated in acrylic resin glue and sold in rolls exceeding 20cm.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm. 8-digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10-digit code 3919908099 - Other than elsewhere specified Also classified in accordance with: HSENs to 3919

  • UK 3919908099 Valable du 24 févr. 2025 au 23 févr. 2028 · Décision 600010082 sur GOV.UK

    A double sided optically clear self-adhesive acrylic film. The film is made of acrylic polymers. The film has a polyester release liner on both sides. The film is put up in the form of jumbo rolls. For use in the manufacture of flat panel displays. Packaged in a box.

    Justification

    Classification has been determined in accordance with: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify the product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5 (B) has been used to identify the type of packaging used. GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20cm 8-Digit code 39199080 – Other than Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10-Digit code 3919908099 -Other than for use in certain types of aircraft; Other than elsewhere specified or included in the heading Also …

  • UK 3919908099 Valable du 24 févr. 2025 au 23 févr. 2028 · Décision 600011989 sur GOV.UK

    4pk small picture hanging strips These are ideal to use when hanging pictures or canvases onto walls. Two pieces with Velcro backing are attached together; the other sides are adhesive; one side is attached to a wall, and the other to the back of a picture. The product is made of polypropylene, polyester and EVA. Holds approximately 1.8kg Size is 4.6*1.6cm

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 Digit Code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 Digit Code 3919908099 - Other than elsewhere specified Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSENs) to 3919 refers

  • UK 3919908099 Valable du 24 févr. 2025 au 23 févr. 2028 · Décision 600011990 sur GOV.UK

    4pk large picture hanging strips For use when hanging pictures or canvases onto walls. Two pieces with Velcro backing are attached together; the other sides are adhesive; one side is attached to a wall, and the other to the back of a picture. Holds approximately 7.2kg Product is made of polypropylene, polyester and EVA Size is 9.2*1.9cm

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 Digit Code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 Digit Code 3919908099 - Other than elsewhere specified Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSENs) to 3919 refers

  • UK 3919908099 Valable du 4 mars 2025 au 3 mars 2028 · Décision 600012565 sur GOV.UK

    Silicone foam rubber with a layer of acrylic pressure sensitive adhesive There is a PET film liner on one side Width 36in (914mm) The foam can be in thicknesses of 0.8mm to 25.4mm with the adhesive layer being 0.127mm in thickness across the range Use: for sealing and insulation Packaged: in rolls and sheets

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging – rolls or sheets GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 digit code 3919908099 – Other than elsewhere specified Also classified in accordance with: Chapter 39 …

  • UK 3919908099 Valable du 24 sept. 2025 au 23 sept. 2028 · Décision 600013610 sur GOV.UK

    Self Adhesive Plastic Seal Small self adhesive plastic seal, presented in sheets and on a release liner. The seal is pressure sensitive and will be affixed to the toner bottle shutter, which is inserted into the neck of a toner bottle to prevent the accidental escape of toner. Components: PET film with acrylic adhesive surface, Microcellular Polyurethane Foam, bottom layer consisting of two layers of acrylic adhesive with a strong woven fabric in between.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify the goods to subheading level 391990 – Other than In rolls of a width not exceeding 20 cm 8 Digit Code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 Digit Code 3919908099 – Other than elsewhere specified Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 3919

  • UK 3919908099 Valable du 19 nov. 2025 au 18 nov. 2028 · Décision 600014241 sur GOV.UK

    Self adhesive foamed polyurethane (PU) seal which is fitted to the neck of toner bottles to help prevent leakage when the bottles are not in use. The seals measure approximately 30mm x 2mm, and are shipped on sheets. The seals are peeled off the paper release sheet and affixed to the toner shutter. The process only requires light pressure to stick the seal onto the shutter for the seal to be permanently affixed. 100% PU

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify the goods to subheading level 391990 – Other than In rolls of a width not exceeding 20 cm 8 Digit Code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 Digit Code 3919908099 – Other than elsewhere specified Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSENs) to 3919

  • UK 3919908099 Valable du 17 déc. 2025 au 16 déc. 2028 · Décision 600014494 sur GOV.UK

    An entrance tacky mat designed to capture dust, dirt, and debris from footwear as people enter a building or site. Made from a water based acrylic resin adhesive and polyethylene. Each sheet features a gentle adhesive layer that lifts surface contaminants when stepped on. Its low-profile construction ensures compatibility with pre-hung doors, allowing them to open and close smoothly over the mat without obstruction. Suitable also for use alongside Temporary Screening. The mat comprises 30 peel-away sheets, each with a self-adhesive backing to keep the mat securely fixed to the floor. Measuring 1150mm x 450mm.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5B has been used identify the type of packaging. GIR 6 has been used to classify this product by the terms of heading 391990 - Other than in rolls of a width not exceeding 20 cm 8 Digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 Digit code 3919908099 - Other than elsewhere specified Also classified in accordance with: Chapter 39 Note 1 …

  • UK 3919908099 Valable du 13 août 2026 au 12 août 2029 · Décision 600016061 sur GOV.UK

    The product is a square shaped plastic pad. It is made from Ethylene-Vinyl Acetate (EVA). The product is self-adhesive. The pad is 30 × 31 × 0.5 cm in size. The pad is a part for a cat exercise wheel. The pad is affixed to the running surface of the wheel to provide traction for the cat during use. The product comes in packs of 12. The pads are packaged in a cardboard box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: GIR 1 - Has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. GIR 5 (b) - Has been used to identify the type of packaging – Cardboard boxes. GIR 6 - Has been used to classify the goods to subheading level 391990 - Other than In rolls of a width not exceeding 20 cm. 8-Digit Code 39199080 - Other than Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers. 10 Digit Code 3919908099 - Other than For use in certain types of aircraft; Other than elsewhere …

Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.

Restrictions et signalements pour 3919000000

  • Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XXI 3919

    Art. 3 decies, biens qui procurent des recettes importantes à la Russie

    Lire l’acte sur EUR-Lex

À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.

TVA à l’importation dans l’UE

  • Allemagne 19 %
  • Autriche 20 %
  • Belgique 21 %
  • Bulgarie 20 %
  • Chypre 19 %
  • Croatie 25 %
  • Danemark 25 %
  • Espagne 21 %
  • Estonie 24 % éventuellement 9 %
  • Finlande 25,5 %
  • France 20 %
  • Grèce 24 %
  • Hongrie 27 %
  • Irlande 23 %
  • Italie 22 %
  • Lettonie 21 %
  • Lituanie 21 %
  • Luxembourg 17 %
  • Malte 18 %
  • Pays-Bas 21 %
  • Pologne 23 %
  • Portugal 23 %
  • Roumanie 21 %
  • Slovaquie 23 %
  • Slovénie 22 %
  • Suède 25 %
  • Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Les règles d’origine préférentielles de la sous-position 391900 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.

Règles d’origine sur Access2Markets

Informations

Lorsque vous importez ou exportez "Plaques, feuilles, bandes, rubans, pellicules et autres formes plates, auto-adhésifs, en matières plastiques, même en rouleaux", il est important d'avoir le bon code SH ou code TARIC. Le code HS 3919000000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.

Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Plaques, feuilles, bandes, rubans, pellicules et autres formes plates, auto-adhésifs, en matières plastiques, même en rouleaux", veuillez noter les points suivants :

  1. Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Plaques, feuilles, bandes, rubans, pellicules et autres formes plates, auto-adhésifs, en matières plastiques, même en rouleaux".
  2. Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Plaques, feuilles, bandes, rubans, pellicules et autres formes plates, auto-adhésifs, en matières plastiques, même en rouleaux" dans le pays de destination ou l'exporter depuis le pays d'origine.
  3. Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
  4. Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
  5. Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.

En résumé, le code HS-Code ou le code TARIC pour "Plaques, feuilles, bandes, rubans, pellicules et autres formes plates, auto-adhésifs, en matières plastiques, même en rouleaux" est 3919000000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Plaques, feuilles, bandes, rubans, pellicules et autres formes plates, auto-adhésifs, en matières plastiques, même en rouleaux".

Structure du HS-Code

39
Chapitre
19
Titre
00
Sous-titre
00
CN sous-titre
00
TARIC sous-titre
80
Codes TARIC supplémentaires

1. Chapitre

Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 39 a été sélectionné pour matières plastiques et ouvrages en ces matières

2. Titre

Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 19 se réfère à Plaques, feuilles, bandes, rubans, pellicules et autres formes plates, auto-adhésifs, en matières plastiques, même en rouleaux.

Arborescence HS-Code

3900000000 80

Chapitre MATIÈRES PLASTIQUES ET OUVRAGES EN CES MATIÈRES

3919000000 80

Plaques, feuilles, bandes, rubans, pellicules et autres formes plates, auto-adhésifs, en matières plastiques, même en rouleaux

3919100000 80

- en rouleaux d'une largeur n'excédant pas 20 cm

3919101200 10

- - Bandes dont l'enduit consiste en caoutchouc, naturel ou synthétique, non vulcanisé

3919101200 80

- - - en poly(chlorure de vinyle) ou en polyéthylène

3919101500 80

- - - en polypropylène

3919101900 80

- - - autres

3919101910 80

- - - - Feuille réfléchissante, constituée d'une couche de polyuréthane présentant, sur une face, des marques de sécurité contre la contrefaçon, l'altération ou la substitution de données ou la duplication, ou une marque officielle pour un usage déterminé, et des billes de verre encastrées et, sur l'autre face, une couche adhésive, recouverte sur une face ou sur les deux faces d'une feuille de protection amovible

3919101990 80

- - - - autres

3919108000 80

- - autres

3919108010 80

- - - destinés à certains types de véhicules aériens

3919108025 10

- - - autres

3919108025 80

- - - - Feuille réfléchissante, constituée d'une couche de polyuréthane présentant, sur une face, des marques de sécurité contre la contrefaçon, l'altération ou la substitution de données ou la duplication, ou une marque officielle pour un usage déterminé, et des billes de verre encastrées et, sur l'autre face, une couche adhésive, recouverte sur une face ou sur les deux faces d'une feuille de protection amovible

3919108027 80

- - - - Film de polyester: - revêtu sur une face d'un adhésif acrylique sensible à la température qui se décolle à des températures comprises entre 90 °C et 200 °C et d'une pellicule de protection amovible en polyester, et - non revêtu sur l'autre face ou revêtu d'un adhésif acrylique sensible à la pression ou d'un adhésif acrylique sensible à la température qui se décolle à des températures comprises entre 90 °C et 200 °C, et d'une pellicule de protection amovible en polyester

3919108035 80

- - - - Feuille réfléchissante, constituée d'une couche de poly(chlorure de vinyle), une couche de polyester alkyde, présentant, sur une face, des marques de sécurité contre la contrefaçon, l'altération ou la substitution de données ou la duplication, ou une marque officielle pour un usage déterminé, seulement visible au moyen d'un éclairage rétroréfléchissant, et des billes de verre encastrées et, sur l'autre face, une couche adhésive, recouverte sur une face ou sur les deux faces d'une feuille de protection amovible

3919108045 80

- - - - Bande renforcée en mousse de polyéthylène, revêtue sur les deux faces, d'un adhésif acrylique sensible à la pression, à microcanaux et, sur une face, d'une feuille de protection amovible, d'une épaisseur d'application de 0,38 mm ou plus mais n'excédant pas 1,53 mm

3919108055 80

- - - - Bande de mousse acrylique: - recouverte sur une face d’un adhésif activable à la chaleur ou d’un adhésif acrylique sensible à la pression, - recouverte sur l’autre face d’un adhésif acrylique sensible à la pression, - recouverte sur une ou sur les deux faces d’une feuille de protection amovible, - d’une adhérence par pelage (peel adhesion) de plus de 25 N/cm (à un angle de 90 º d’après la méthode ASTM D 3330)

3919108057 80

- - - - Feuille réfléchissante constituée: - d'un film polymère acrylique ou de polycarbonate dont une des faces est entièrement estampée d'un motif régulier, - recouvert sur une face ou sur les deux faces d'une ou plusieurs couches de matière plastique, et - éventuellement recouvert sur une face d'une couche adhésive et d'une pellicule amovible

3919108063 80

- - - - Feuille réfléchissante consistant en - une couche de résine acrylique présentant des marques de sécurité contre la contrefaçon, l'altération ou la substitution de données ou la duplication, ou une marque officielle pour un usage déterminé, - une couche de résine acrylique ayant intégré des billes de verre, - une couche de résine acrylique durcie par un agent de réticulation en mélamine, - une couche métallique, - un adhésif acrylique et - une pellicule de protection

3919108073 80

- - - - Feuille réfléchissante autoadhésive, découpée ou non en morceaux: - présentant ou non un filigrane, - avec ou sans couche de ruban adhésif sur un côté, - la feuille réfléchissante consiste en - une couche de polymère acrylique ou vinylique, - une couche de polyméthacrylate de méthyle ou de polycarbonate contenant des microprismes, - une couche de métallisation - une couche adhésive, et - une feuille détachable - comportant ou non une couche supplémentaire de polyester

3919108075 80

- - - - Feuille réfléchissante auto-adhésive, constituée de plusieurs couches: - copolymère de résine acrylique, - polyuréthane, - couche métallisée présentant, sur une face, des marques laser contre la contrefaçon, l'altération ou la substitution de données ou la duplication, ou une marque officielle pour un usage déterminé, - microsphères de verre, et - couche adhésive, recouverte sur une face ou sur les deux faces d'une pellicule de protection amovible

3919108078 80

- - - - Film de polytétrafluoroéthylène, -d'une épaisseur de 50 µm ou plus, -d'une largeur d'au moins 6,30 mm mais n'excédant pas 740 mm, -d'un allongement à la rupture n'excédant pas 200 %, et -recouvert sur une face d'un adhésif en silicone sensible à la pression d'une épaisseur maximale de 50 µm

3919108090 80

- - - - autres

3919900000 80

- autres

3919902000 80

- - Tampons circulaires à polir autoadhésifs du type utilisé pour la fabrication de disques (wafers) à semi-conducteur

3919908000 80

- - autres

3919908010 80

- - - destinés à certains types de véhicules aériens

3919908020 10

- - - autres

3919908020 80

- - - - Film de polyester: - revêtu sur une face d'un adhésif acrylique sensible à la température qui se décolle à des températures comprises entre 90 °C et 200 °C et d'une pellicule de protection amovible en polyester, et - non revêtu sur l'autre face ou revêtu d'un adhésif acrylique sensible à la pression ou d'un adhésif acrylique sensible à la température qui se décolle à des températures comprises entre 90 °C et 200 °C, et d'une pellicule de protection amovible en polyester

3919908023 80

- - - - Feuille constituée de 1 à 3 couches stratifiées de poly(éthylène téréphtalate) et d'un copolymère d'acide téréphtalique, d'acide sébacique et d'éthylène glycol, enduite sur une face d'un enduit acrylique résistant à l'abrasion et sur l'autre face d'un adhésif acrylique sensible à la pression, d'un enduit de méthylcellulose soluble dans l'eau et d'une feuille de protection en poly(éthylène téréphtalate)

3919908024 80

- - - - Feuille stratifiée réfléchissante: - constituée d'une couche d'époxyacrylate estampée sur une face d'un motif régulier, - recouverte sur les deux faces d'une ou plusieurs couches de matière plastique, et - recouverte sur une face d'une couche adhésive et d'un pellicule amovible

3919908030 80

- - - - Feuille réfléchissante constituée: - d'un film polymère acrylique ou de polycarbonate dont une des faces est entièrement estampée d'un motif régulier, - recouvert sur une face ou sur les deux faces d'une ou plusieurs couches de matière plastique, et - éventuellement recouvert sur une face d'une couche adhésive et d'une pellicule amovible

3919908031 80

- - - - Feuille réfléchissante, constituée d'une couche de polyuréthane présentant, sur une face, des marques de sécurité contre la contrefaçon, l'altération ou la substitution de données ou la duplication, ou une marque officielle pour un usage déterminé, et des billes de verre encastrées et, sur l'autre face, une couche adhésive, recouverte sur une face ou sur les deux faces d'une feuille de protection amovible

3919908033 80

- - - - Film autocollant transparent en poly(éthylène), sans aucune impureté ou défaut, recouvert sur une face d'un adhésif de contact acrylique, d'une épaisseur de 60 μm ou plus mais n'excédant pas 70 μm et d'une largeur de plus de 1 245 mm mais n'excédant pas 1 255 mm

3919908045 80

- - - - Bande renforcée en mousse de polyéthylène, revêtue sur les deux faces, d'un adhésif acrylique sensible à la pression, à microcanaux et, sur une face, d'une feuille de protection amovible, d'une épaisseur d'application de 0,38 mm ou plus mais n'excédant pas 1,53 mm

3919908048 80

- - - - Film de polytétrafluoroéthylène, -d'une épaisseur de 50 µm ou plus, -d'une largeur d'au moins 6,30 mm mais n'excédant pas 740 mm, -d'un allongement à la rupture n'excédant pas 200 %, et -recouvert sur une face d'un adhésif en silicone sensible à la pression d'une épaisseur maximale de 50 µm

3919908049 80

- - - - Feuille autoadhésive stratifiée réfléchissante consistant d'un film de poly(méthacrylate de méthyle) embouti sur une face d'une manière régulière, d'un film contenant des microsphères de verre, d'une couche adhésive et d'une feuille détachable

3919908050 80

- - - - Feuille réfléchissante autoadhésive, découpée ou non en morceaux: - présentant ou non un filigrane, - avec ou sans couche de ruban adhésif sur un côté, - la feuille réfléchissante consiste en - une couche de polymère acrylique ou vinylique, - une couche de polyméthacrylate de méthyle ou de polycarbonate contenant des microprismes, - une couche de métallisation - une couche adhésive, et - une feuille détachable - comportant ou non une couche supplémentaire de polyester

3919908053 80

- - - - Bande de mousse acrylique: - recouverte sur une face d’un adhésif activable à la chaleur ou d’un adhésif acrylique sensible à la pression, - recouverte sur l’autre face d’un adhésif acrylique sensible à la pression, - recouverte sur une ou sur les deux faces d’une feuille de protection amovible, - d’une adhérence par pelage (peel adhesion) de plus de 25 N/cm (à un angle de 90 º d’après la méthode ASTM D 3330)

3919908054 80

- - - - Film de poly(chlorure de vinyle) comportant un côté recouvert: - d'une couche de polymère, - d'une couche adhésive, - d'une pellicule de protection estampée sur un côté et contenant des sphères aplaties, et un autre côté recouvert ou non d'une couche adhésive et d'une couche polymère métallisée

3919908055 80

- - - - Film de poly(chlorure de vinyle) noir : -d'une brillance supérieure à 25 degrés, (d'après la méthode ASTM D 2457), -recouvert ou non, sur une face, d'une pellicule de protection en polyéthylène téréphtalate et, sur l'autre, d'un adhésif acrylique microstructuré sensible à la pression et d'une pellicule de protection amovible -destiné à la fabrication de films découpés à la forme pour les surfaces intérieures et extérieures des véhicules automobiles

3919908056 80

- - - - Film de polyéthylène transparent recouvert sur une face d'un adhésif acrylique aqueux, d'une épaisseur de 30 μm à 50 μm, conditionné en rouleaux d'une largeur de 52 cm ou plus mais n'excédant pas 154 cm

3919908057 80

- - - - Feuille de polycarbonate autoadhésive, imprimée, même arquée, présentant : -une épaisseur de 0,3 mm ou plus mais pas plus de 0,4 mm, -des dimensions minimales de 63 mm x 15 mm, -des dimensions maximales de 278 mm x 117 mm, -un poids ne dépassant pas 5 g par pièce, destinée à être intégrée dans les tableaux de bord combinés de voitures particulières

3919908058 80

- - - - Feuille biaxialement orientée en poly(méthacrylate de méthyle), d'une épaisseur de 20 µm ou plus mais n'excédant pas 90 µm, recouverte sur une face d'une couche adhésive et d'une feuille de protection amovible

3919908065 80

- - - - Film autoadhésif d’une épaisseur égale ou supérieure à 40 µm, mais ne dépassant pas 475µm, consistant en une ou plusieurs couches de poly(éthylène téréphtalate) transparent, métallisé ou teint, recouvert, sur une face, d’un revêtement résistant aux rayures et, sur l’autre, d’un adhésif sensible à la pression et d’une pellicule antiadhésive

3919908070 80

- - - - Disques à polir auto-adhésifs de polyuréthane microporeux, revêtus ou non d'un tampon

3919908080 80

- - - - Feuille réfléchissante auto-adhésive, constituée de plusieurs couches: - copolymère de résine acrylique, - polyuréthane, - couche métallisée présentant, sur une face, des marques laser contre la contrefaçon, l'altération ou la substitution de données ou la duplication, ou une marque officielle pour un usage déterminé, - microsphères de verre, et - couche adhésive, recouverte sur une face ou sur les deux faces d'une pellicule de protection amovible

3919908082 80

- - - - Feuille réfléchissante comprenant: - une couche de polyuréthane, - une couche de microsphères de verre, - une couche métallisée en aluminium et - une couche adhésive recouverte, sur une face ou sur les deux, d'une pellicule de protection amovible, - même une couche de chlorure de polyvinyle, - une couche pouvant incorporer des marques de sécurité contre la contrefaçon, l'altération ou la substitution de données ou la duplication, ou une marque officielle pour un usage déterminé

3919908083 80

- - - - Film réfléchissant ou diffusant en rouleaux, utilisé -comme protection contre le rayonnement thermique ultraviolet ou infrarouge, à poser sur les vitrages, ou -pour assurer une transmission et une répartition égales de la lumière, dans les modules LCD

3919908099 80

- - - - autres