Restrictions commerciales pour l'importation de marchandises pour 7325990000 80
Les droits d’autres codes avec un compte gratuit
Vous avez consulté les droits de 10 codes aujourd’hui. Créez un compte gratuit pour voir droits, mesures et historique de tous les codes.
Règles d’origine préférentielles pour 7325990000
Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chili
EU-Algeria Association Agreement · Algérie
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Îles Féroé, Liechtenstein, Norvège, Suisse
EU-Egypt Association Agreement · Égypte
EU-Georgia DCFTA · Géorgie
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam
EU-Iceland FTA · Islande
EU-Jordan Association Agreement · Jordanie
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie
EU-Korea FTA · Corée du Sud
EU-Central America Association Agreement
EU-Lebanon Association Agreement · Liban
EU-Morocco Association Agreement · Maroc
EU-Moldova DCFTA · Moldavie
Pan-Euro-Mediterranean (PEM) Convention · Albanie, Andorre, Bosnie-Herzégovine, Égypte, Îles Féroé, Islande, Kosovo, Liechtenstein, Macédoine du Nord, Monténégro, Norvège, Palestine, Suisse, Turquie
EU-Singapore FTA · Singapour
EU-Tunisia Association Agreement · Tunisie
EU-Ukraine DCFTA · Ukraine
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product
EPA CARIFORUM
EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya
EPA Pacific · Fidji, Îles Salomon, Papouasie-Nouvelle-Guinée, Samoa
EU-Mexico Global Agreement · Mexique
EU-Palestine Interim Association Agreement · Palestine
EPA SADC · Afrique du Sud
Articles of iron or steel; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product
EU-Canada CETA · Canada
A change from any other heading.
EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product [95]
EPA Eastern and Southern Africa
Sheet piling / or: Manufacture from materials of heading No 7206
EU-Japan EPA · Japon
CTH
EU-Viet Nam FTA · Viêt Nam
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product.
Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets
Notes légales et notes explicatives pour 7325990000
Notes du chapitre 73
Notes 1. Dans ce chapitre, on entend par «fontes» les produits obtenus par moulage dans lesquels le fer prédomine en poids sur chacun des autres éléments et qui ne répondent pas à la composition chimique des aciers visés à la note 1, point d), du chapitre 72. 2. Aux fins du présent chapitre, le terme «fils» s'entend des produits obtenus à chaud ou à froid dont la coupe transversale, de forme quelconque, n'excède pas 16 millimètres dans sa plus grande dimension.
Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex
Règlements de classement de l’UE pour 7325990000
Règlements de la Commission qui ont classé des marchandises précises sous ce code. Ils lient les douanes de tous les États membres pour des marchandises identiques.
- 7325 99 10 18 févr. 2019 · Règlement sur EUR-Lex
Article circulaire d'un diamètre d'environ 500 mm et d'un poids d'environ 23 kg. Il est constitué de fonte à graphite sphéroïdal (fonte ductile, EN-GJS-500-7). L'article est recouvert de bitume noir qui sert de protection contre la corrosion.
Cet article est certifié selon la norme EN 124 (dispositifs de couronnement et de fermeture pour les zones de circulation utilisées par les piétons et les véhicules) et il est utilisé en tant que plaque d'égout (pour les égouts d'eau pluviale, par exemple). Voir l'image (1).
Motifs
Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée et par le libellé des codes NC 7325 , 7325 99 et 7325 99 90 . Le classement de l'article sous le code NC 7325 10 00 en tant qu'autre ouvrage moulé en fonte non malléable est exclu, étant donné que la fonte non malléable est non déformable sous une contrainte de compression, tandis que la fonte à graphite sphéroïdal est déformable sous une contrainte de traction et aussi, dans une certaine mesure, sous une contrainte de compression. La fonte à graphite sphéroïdal en tant que telle ne peut donc pas être considérée comme de la fonte non malléable (voir, par analogie, l'arrêt du 12 juillet 2018, Profit Europe, rendu dans les affaires jointes C-397/17 et C-398/17, EU:C:2018:564). Le classement de l'article sous le code NC 7325 99 10 en tant qu'autre ouvrage moulé en fonte malléable est également exclu, étant donné que la fonte à graphite sphéroïdal et la fonte malléable diffèrent de par leur composition et leur méthode de production. Quand bien même la fonte à graphite sphéroïdal présenterait des caractéristiques semblables à celles de la fonte malléable (EN-GJM), elle n'en constitue pas moins une catégorie distincte (EN-GJS) (voir, par analogie, l'arrêt du 12 juillet 2018, Profit Europe, rendu dans les affaires jointes C-397/17 et C-398/17). Il convient dès lors de classer l'article sous le code NC 7325 99 90 en tant qu'«autre ouvrage moulé d'un autre type de fonte».
Classé à l’époque sous 7325 99 90
- 7325 99 90 18 févr. 2019 · Règlement sur EUR-Lex
Article circulaire d'un diamètre d'environ 500 mm et d'un poids d'environ 23 kg. Il est constitué de fonte à graphite sphéroïdal (fonte ductile, EN-GJS-500-7). L'article est recouvert de bitume noir qui sert de protection contre la corrosion.
Cet article est certifié selon la norme EN 124 (dispositifs de couronnement et de fermeture pour les zones de circulation utilisées par les piétons et les véhicules) et il est utilisé en tant que plaque d'égout (pour les égouts d'eau pluviale, par exemple). Voir l'image (1).
Motifs
Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée et par le libellé des codes NC 7325 , 7325 99 et 7325 99 90 . Le classement de l'article sous le code NC 7325 10 00 en tant qu'autre ouvrage moulé en fonte non malléable est exclu, étant donné que la fonte non malléable est non déformable sous une contrainte de compression, tandis que la fonte à graphite sphéroïdal est déformable sous une contrainte de traction et aussi, dans une certaine mesure, sous une contrainte de compression. La fonte à graphite sphéroïdal en tant que telle ne peut donc pas être considérée comme de la fonte non malléable (voir, par analogie, l'arrêt du 12 juillet 2018, Profit Europe, rendu dans les affaires jointes C-397/17 et C-398/17, EU:C:2018:564). Le classement de l'article sous le code NC 7325 99 10 en tant qu'autre ouvrage moulé en fonte malléable est également exclu, étant donné que la fonte à graphite sphéroïdal et la fonte malléable diffèrent de par leur composition et leur méthode de production. Quand bien même la fonte à graphite sphéroïdal présenterait des caractéristiques semblables à celles de la fonte malléable (EN-GJM), elle n'en constitue pas moins une catégorie distincte (EN-GJS) (voir, par analogie, l'arrêt du 12 juillet 2018, Profit Europe, rendu dans les affaires jointes C-397/17 et C-398/17). Il convient dès lors de classer l'article sous le code NC 7325 99 90 en tant qu'«autre ouvrage moulé d'un autre type de fonte».
Renseignements tarifaires du Royaume-Uni pour 7325990000
Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.
- UK 7325991090 Valable du 11 sept. 2025 au 10 sept. 2028 · Décision 600012976 sur GOV.UK
The item is a Christmas tree stand made from malleable cast iron. The heavyweight design allows a tree to fit into a socket and be secured in place using the metal bolts supplied. There are two socket sizes, four or five inches and these are also used to hold water. The tree stands are finished with hand painted decorative designs in gold.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel GIR 6 has been used to classify the goods to subheading level 7325 99 – Other than of non-malleable cast iron; Other than Grinding balls and similar articles for mills. 8-digit code 732599 10 Of cast iron. 10-digit code 73259910 90 – Other than elsewhere specified. Also classified in accordance with: Section notes 3 to Section XV Chapter notes 1 to chapter 73 Harmonised System Explanatory Notes (HSEN) to 7325
- UK 7325991090 Valable du 26 févr. 2026 au 25 févr. 2029 · Décision 600014996 sur GOV.UK
A pair of Andirons (Circa 1937) designed by Melchiorre Bega (1894–1974). The andirons are constructed of both cast iron and brass, with iron providing structural strength and brass used for the sculptural decorative elements. Dimensions: Each: 25.4 x 21.6 x 36.2 cm (10 x 8 1/2 x 14 1/4 in.).
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel GIR 3B - has been used as the Cast Iron is considered to be the essential character. GIR 6 has been used to classify the goods to subheading level 7325 99 – Other than of non-malleable cast iron; Other than Grinding balls and similar articles for mills. 8-digit code 732599 10 Of cast iron. 10-digit code 73259910 90 – Other than elsewhere specified. Also classified in accordance with: Section notes 3 to Section XV Chapter notes 1 to …
- UK 7325991090 Valable du 17 août 2026 au 16 août 2029 · Décision 600015604 sur GOV.UK
This ruling is for the ABR Articulated Bend Restrictors only. The ABR's provide protection and additional weight to the cable to aid the transition into burial. The component is manufactured from Spheroidal Graphite Iron grade EN-GJS-450-10. Each male spigot at either end rotates and locks out within the female collar within the subsequent component to form a bend radius suitable for both installation over-boarding and operational conditions. The 2.5m of ABR's will be provided with epoxy coating and independent cathodic protection.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other 8 Digit Code 73259910 - Of Cast Iron. 10 Digit Code 7325991090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325
+ 5 de plus
- UK 7325991090 Valable du 7 oct. 2026 au 6 oct. 2029 · Décision 600016156 sur GOV.UK
Cast Iron Inserts PN-002-004-590 & PN-002-004-591 The cast elements are manufactured from Spheroidal Graphite Iron (SGI) in accordance with EN 1563. Spheroidal Graphite Cast Irons, grade EN-GJS-450-10. Typical Chemical Composition (controlled at supplier/foundry level): - Carbon (C): 3.4 – 3.9 % Silicon (Si): 2.2 – 2.8 % Manganese (Mn): ≤ 0.30 % Phosphorus (P): ≤ 0.05 % Sulphur (S): ≤ 0.02 % Magnesium (Mg): 0.03 – 0.06 % (residual, to ensure spheroidal graphite formation) Iron (Fe): Balance Minor alloying elements such as Copper (Cu), Nickel (Ni), or Molybdenum (Mo) may be added in controlled and limited quantities when required to achieve the specified mechanical properties. Minimum Tensile Strength: ≥ 450 MPa, and Minimum Elongation: ≥ 10 %. The cast elements are produced using a Green Sand Casting Process with an automated High Pressure Moulding Line (HPML). Raw Material Charging and Melting Approved base iron, steel scrap, and internal returns are charged into an induction furnace. The molten iron is treated with magnesium-based alloys to convert graphite into a spheroidal (nodular) form. Green Sand (HPML) Moulds are produced on an automated high-pressure moulding line using green sand composed of silica sand, bentonite clay, water, and additives. HPML ensures high dimensional accuracy, repeatability, and stable mould quality. Molten SGI is poured into the prepared moulds under controlled temperature and pouring conditions. Castings are allowed to solidify and cool under controlled conditions to minimize defects. After cooling castings are removed from the moulds. Gates, risers, and excess material are removed through fettling operations such as cutting and grinding. For use in the offshore energy industry for pipeline protection. Insert is over moulded within a polymer product to provide asset protection, impact resistance and stabilization. Usually packed in crates.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other. 8 Digit Code 73259910 - Of cast iron. 10 Digit Code - 7325991090 - Other. Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325
- UK 7325991090 Valable du 8 oct. 2026 au 7 oct. 2029 · Décision 600016159 sur GOV.UK
A 205ID MIU MANDREL of Cast Iron Composition. The materials are Grade ISO 1083 / JS / 450-10. Ductile iron, is a high-performance cast material in which graphite exists in the form of spherical nodules. It is a ferritic-matrix ductile iron characterized by a minimum tensile strength of 450 MPa, elongation of 10%, and good impact toughness. A blend of pig iron, steel scrap, and returns in controlled ratios is melted in induction furnaces (medium-frequency) or cupolas at ~1500–1550°C. Magnesium-bearing alloys are introduced via ladle treatment. Pouring is performed at 1300–1400°C with controlled gating to minimize turbulence and oxidation. Proper riser design and use of chills ensure directional solidification and minimize shrinkage defects. Cleaned by using a shot blasting machine. For use in the offshore energy industry for pipeline protection. Insert is over moulded within a polymer product to provide asset protection, impact resistance and stabilization. Usually packed in crates.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other 8 Digit Code 73259910 - Of cast iron 10 Digit Code 7325991090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325.
- UK 7325991090 Valable du 8 oct. 2026 au 7 oct. 2029 · Décision 600016181 sur GOV.UK
A 205ID MIU MANDREL of Cast Iron Composition. The materials are Grade ISO 1083 / JS / 450-10. Ductile iron, is a high-performance cast material in which graphite exists in the form of spherical nodules. It is a ferritic-matrix ductile iron characterized by a minimum tensile strength of 450 MPa, elongation of 10%, and good impact toughness. A blend of pig iron, steel scrap, and returns in controlled ratios is melted in induction furnaces (medium-frequency) or cupolas at ~1500 1550°C. Magnesium-bearing alloys are introduced via ladle treatment. Pouring is performed at 1300 1400°C with controlled gating to minimize turbulence and oxidation. Proper riser design and use of chills ensure directional solidification and minimize shrinkage defects. Cleaned by using a shot blasting machine. For use in the offshore energy industry for pipeline protection. Insert is over moulded within a polymer product to provide asset protection, impact resistance and stabilization. Usually packed in crates.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other 8 Digit Code 73259910 - Of cast iron 10 Digit Code 7325991090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325.
- UK 7325991090 Valable du 13 oct. 2026 au 12 oct. 2029 · Décision 600016182 sur GOV.UK
A 205ID JIU BODY of Cast Iron Composition. The materials are Grade ISO 1083 / JS / 450-10. Ductile iron, is a high-performance cast material in which graphite exists in the form of spherical nodules. It is a ferritic-matrix ductile iron characterized by a minimum tensile strength of 450 MPa, elongation of 10%, and good impact toughness. A blend of pig iron, steel scrap, and returns in controlled ratios is melted in induction furnaces (medium-frequency) or cupolas at ~1500 1550°C. Magnesium-bearing alloys are introduced via ladle treatment and Pouring is performed at 1300 1400°C with controlled gating to minimize turbulence and oxidation. Proper riser design and use of chills ensure directional solidification and minimize shrinkage defects. Cleaned by using a shot blasting machine. For use in the offshore energy industry for pipeline protection. Insert is over moulded within a polymer product to provide asset protection, impact resistance and stabilization. Usually packed in crates.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other 8 Digit Code 73259910 - Of Cast Iron. 10 Digit Code 7325991090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325
- UK 7325999090 Valable du 1 déc. 2023 au 30 nov. 2026 · Décision 600009280 sur GOV.UK
The yokes are steel castings used to operate and control the steering and rudder planes of a submarine, the planes are the method a submarine steers whilst in the water, they also control when the submarine dives or surfaces. They are made from HY80 Grade of Steel. The yokes require no specific packaging, will be packed suitably for sea shipment.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s Gir 1 has been used to classify this product by the terms of heading 7325 for other cast articles of iron or steel Gir 5 (b) has been used to identify the type of packaging Gir 6 has been used to classify the goods to subheading level 732599 for other than; of non-malleable cast iron and other than; grinding balls and similar articles for mills Eight digit code 73259990 for other than; of malleable cast iron Ten digit code 7325999090 for other than elsewhere specified in this commodity code Also classified in accordance with Note 3 to Section XV Harmonised System Explanatory Notes (HSEN) to Heading 7325
Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.
Restrictions et signalements pour 73259900
- Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XVII 7325
Art. 3 octies, produits sidérurgiques
Lire l’acte sur EUR-Lex - Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 7325
Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie
Lire l’acte sur EUR-Lex - Biens à double usage Règlement (UE) 2021/821, Annexe I 73259900
Ne couvre qu’une partie des marchandises sous ce code (l’acte cite 73259900).
Peut être à double usage ; vérifier l'entrée 2B352a de l'annexe I (table de correspondance non contraignante)
Lire l’acte sur EUR-Lex
À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués. Le tableau des biens à double usage relie les codes aux entrées de la liste de contrôle et n’est pas contraignant.
Contingents tarifaires pour 73259900
- Ouvert 09.7163 Origine: Colombie
Other cast articles of iron or steel
1 août 2026 – 31 juil. 2027
50 000 000 KilogramsSolde restant (100 %)Volume 50 000 000 - Ouvert 09.7194 Origine: Pérou
Other cast articles of iron or steel
1 mars 2026 – 28 févr. 2027
50 000 000 KilogramsSolde restant (100 %)Volume 50 000 000 - Ouvert 09.7512 Origine: Équateur
Other cast articles of iron or steel
1 janv. 2026 – 31 déc. 2026
50 000 000 KilogramsSolde restant (100 %)Volume 50 000 000
Source : Commission européenne, rapports sur les contingents tarifaires, état au 30 oct. 2026. Les soldes changent chaque jour.
Commerce de l’UE en 2025 pour 73259900
- Importations extra-UE
- 790,7 M €
- 337 761 t
- Exportations extra-UE
- 337,3 M €
Principaux pays d’origine selon la valeur importée
Chine 303,3 M €
Inde 191,4 M €
Turquie 120 M €
Royaume-Uni 49,9 M €
Suisse 24,9 M €
Chiffres du code NC8 73259900. Source : Eurostat, Comext, CC BY 4.0, traité par hscode.info. Le commerce confidentiel n’est pas attribué aux codes.
Modifications tarifaires pour 73259900 depuis 2016
- juin 2020 3 codes Code supprimé
- juin 2020 3 codes Code créé
- janv. 2020 3 codes Code supprimé
- janv. 2020 2 codes Code créé
- avr. 2019 5 codes Code supprimé
- avr. 2019 5 codes Code créé
- avr. 2018 7325991035 Code créé
- sept. 2017 3 codes Code créé
Comparaison mensuelle des extractions TARIC de la Commission européenne. Prix d’entrée saisonniers exclus.
Droit d’importation au Royaume-Uni pour 732599
- 0%
Droits de pays tiers de tous les codes britanniques sous cette sous-position du SH. Source : UK Department for Business and Trade, au 2 nov. 2026. Le tarif britannique diffère du tarif de l’UE.
TVA à l’importation dans l’UE
- Allemagne 19 %
- Autriche 20 %
- Belgique 21 %
- Bulgarie 20 %
- Chypre 19 %
- Croatie 25 % éventuellement 13 %
- Danemark 25 %
- Espagne 21 %
- Estonie 24 %
- Finlande 25,5 %
- France 20 %
- Grèce 24 %
- Hongrie 27 %
- Irlande 23 %
- Italie 22 %
- Lettonie 21 %
- Lituanie 21 %
- Luxembourg 17 %
- Malte 18 % éventuellement 5 %
- Pays-Bas 21 %
- Pologne 23 %
- Portugal 23 %
- Roumanie 21 %
- Slovaquie 23 %
- Slovénie 22 %
- Suède 25 %
- Tchéquie 21 %
Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.
Règles d’origine
Les règles d’origine préférentielles de la sous-position 732599 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.
Règles d’origine sur Access2MarketsInformations
Lorsque vous importez ou exportez "autres", il est important d'avoir le bon code SH ou code TARIC. Le code HS 7325990000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.
Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "autres", veuillez noter les points suivants :
- Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "autres".
- Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "autres" dans le pays de destination ou l'exporter depuis le pays d'origine.
- Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
- Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
- Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.
En résumé, le code HS-Code ou le code TARIC pour "autres" est 7325990000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "autres".
Structure du HS-Code
1. Chapitre
Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 73 a été sélectionné pour ouvrages en fonte, fer ou acier
2. Titre
Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 25 se réfère à Autres ouvrages moulés en fonte, fer ou acier.
3. Sous-titre
Les deux derniers chiffres du code harmonisé international sont plus spécifiques et définissent des sous-catégories de produits. Dans l'exemple ci-dessus, la 99 se réfère à autres.
Arborescence HS-Code
7300000000 80
Chapitre OUVRAGES EN FONTE, FER OU ACIER
7325000000 80
Autres ouvrages moulés en fonte, fer ou acier
7325100000 80
- en fonte non malléable
7325100010 80
- - Grilles de caniveau et couvercles en fonte relevant de la norme EN 1433, destinés à être utilisés comme composants de caniveaux en polymère, en plastique, en acier galvanisé ou en béton permettant aux eaux de surface de s'écouler dans le caniveau
7325100015 80
- - Avaloirs de sol et de toit, ouvertures de nettoyage et couvercles pour ces ouvertures relevant de la norme EN 1253
7325100020 80
- - Echelons, clefs de levage et bouches d'incendie
7325100031 10
- - autres
7325100031 80
- - - Articles en fonte à graphite lamellaire (fonte grise), et des pièces s'y rapportant, d'un type utilisé pour: - couvrir et/ou donner accès à des systèmes affleurant le sol ou souterrains, et - permettre un accès physique et/ou visuel à de tels systèmes
7325100099 80
- - - autres
7325910000 10
- autres
7325910000 80
- - Boulets et articles similaires pour broyeurs
7325990000 80
- - autres
7325991000 80
- - - en fonte
7325991031 80
- - - - Grilles de caniveau et couvercles en fonte relevant de la norme EN 1433, destinés à être utilisés comme composants de caniveaux en polymère, en plastique, en acier galvanisé ou en béton permettant aux eaux de surface de s'écouler dans le caniveau
7325991035 80
- - - - Avaloirs de sol et de toit, ouvertures de nettoyage et couvercles pour ces ouvertures relevant de la norme EN 1253
7325991040 80
- - - - Echelons, clefs de levage et bouches d'incendie
7325991060 80
- - - - Articles en fonte à graphite sphéroïdal (également appelée fonte ductile), et des pièces s'y rapportant, d'un type utilisé pour: - couvrir et/ou donner accès à des systèmes affleurant le sol ou souterrains, et - permettre un accès physique et/ou visuel à de tels systèmes
7325991090 80
- - - - autres
7325999000 80
- - - autres
7325999010 80
- - - - Colliers, brides et dispositifs de soutien, de raccordement, de serrage ou d'espacement, destinés à certains types de véhicules aériens
7325999020 80
- - - - Dispositifs pour l'arrimage et le verrouillage du fret, destinés à certains types de véhicules aériens
7325999030 80
- - - - Billes utilisées dans le système de chargement du fret, destinées à certains types de véhicules aériens
7325999090 80
- - - - autres