Restrictions commerciales pour l'importation de marchandises pour 7325000000 80
Cette table contient des informations sur les restrictions commerciales pour l'importation de marchandises dans l'UE et l'UE dans les pays tiers. Le tableau contient des informations sur les les restrictions commerciales dues à des unions douanières, des préférences, des quotas tarifaires, les unions douanières, les contrôles vétérinaires, les droits de douane des pays tiers et les quotas tarifaires non préférentiels quotas.
| Pays d'origine | Début | Droit / Impôt | Base légale Type de mesure | |
|---|---|---|---|---|
| Colombia CO | 01-08-2026 – 31-07-2027 | 0 % | Quota tarifaire préférentiel 143 | |
| Peru PE | 01-03-2026 – 28-02-2027 | 0 % | Quota tarifaire préférentiel 143 | |
| Ecuador EC | 01-01-2026 – 31-12-2026 | 0 % | Quota tarifaire préférentiel 143 | |
| Faroe Islands FO | 01-01-1997 | 0 % | Préférence tarifaire 142 | |
| Türkiye TR | 01-01-2006 | 0 % | Droit de l'union douanière 106 | |
| San Marino SM | 01-01-2006 | 0 % | Droit de l'union douanière 106 | |
| EU-Switzerland agreement: re-imported goods 1007 | 01-01-2007 | 0 % | Préférence tarifaire 142 | |
| North Macedonia MK | 01-01-2009 | 0 % | Préférence tarifaire 142 | |
| Bosnia and Herzegovina BA | 01-01-2009 | 0 % | Préférence tarifaire 142 | |
| Ukraine UA | 01-01-2016 | 0 % | Préférence tarifaire 142 | |
2020 | GSP - General arrangements 2020 | 01-01-2017 | 0 % | Préférence tarifaire 142 |
| Ecuador EC | 01-01-2017 | 0 % | Préférence tarifaire 142 | |
2080 | OCTs (Overseas Countries and Territories) 2080 | 01-01-2021 | 0 % | Préférence tarifaire 142 |
XS | Serbia XS | 01-02-2010 | 0 % | Préférence tarifaire 142 |
| Japan JP | 01-02-2020 | 0 % | Préférence tarifaire 142 | |
| Peru PE | 01-03-2013 | 0 % | Préférence tarifaire 142 | |
| Albania AL | 01-04-2009 | 0 % | Préférence tarifaire 142 | |
| Kosovo XK | 01-04-2016 | 0 % | Préférence tarifaire 142 | |
| Montenegro ME | 01-05-2010 | 0 % | Préférence tarifaire 142 | |
| New Zealand NZ | 01-05-2024 | 0 % | Préférence tarifaire 142 | |
| Viet Nam VN | 01-08-2020 | 0 % | Préférence tarifaire 142 | |
| Georgia GE | 01-09-2014 | 0 % | Préférence tarifaire 142 | |
| Syria SY | 01-11-1978 | 0 % | Préférence tarifaire 142 | |
1011 | ERGA OMNES 1011 | 01-11-2018 | 0 % | Suspension tarifaire de la conformité aérienne 119 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 3 EUR | Low-value consignment customs duty 107 |
| South Africa ZA | 10-10-2016 | 0 % | Préférence tarifaire 142 | |
| Armenia AM | 10-10-2026 – 11-10-2028 | 0 % | Préférence tarifaire 142 | |
| Switzerland CH | 20-12-1972 | 0 % | Préférence tarifaire 142 | |
| EU-Canada agreement: re-imported goods 1006 | 21-09-2017 | 0 % | Préférence tarifaire 142 | |
| Canada CA | 21-09-2017 | 0 % | Préférence tarifaire 142 | |
| Andorra AD | 01-01-2006 | 0 % | Droit de l'union douanière 106 | |
2005 | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005 | 01-01-2014 | 0 % | Préférence tarifaire 142 |
2027 | GSP+ (incentive arrangement for sustainable development and good governance) 2027 | 01-01-2014 | 0 % | Préférence tarifaire 142 |
| Moldova, Republic of MD | 01-01-2016 | 0 % | Préférence tarifaire 142 | |
| United Kingdom GB | 01-01-2021 | 0 % | Préférence tarifaire 142 | |
| Ghana GH | 01-01-2027 | 0 % | Préférence tarifaire 142 | |
| Singapore SG | 01-01-2027 | 0 % | Préférence tarifaire 142 | |
| Chile CL | 01-02-2025 | 0 % | Préférence tarifaire 142 | |
| Tunisia TN | 01-03-1998 | 0 % | Préférence tarifaire 142 | |
| Morocco MA | 01-03-2000 | 0 % | Préférence tarifaire 142 | |
| Lebanon LB | 01-04-2006 | 0 % | Préférence tarifaire 142 | |
| Jordan JO | 01-05-2002 | 0 % | Préférence tarifaire 142 | |
| Egypt EG | 01-06-2004 | 0 % | Préférence tarifaire 142 | |
2012 | EEA - European Economic Area 2012 | 01-07-2007 | 0 % | Préférence tarifaire 142 |
| Korea, Republic of (South Korea) KR | 01-07-2011 | 0 % | Préférence tarifaire 142 | |
| Mexico MX | 01-07-2016 | 0 % | Préférence tarifaire 142 | |
| Kenya KE | 01-07-2024 | 0 % | Préférence tarifaire 142 | |
| United States US | 01-07-2026 | 0 % | Préférence tarifaire 142 | |
2200 | Central America 2200 | 01-08-2013 | 0 % | Préférence tarifaire 142 |
| Colombia CO | 01-08-2013 | 0 % | Préférence tarifaire 142 | |
| Algeria DZ | 01-09-2005 | 0 % | Préférence tarifaire 142 | |
1011 | ERGA OMNES 1011 | 01-11-2026 | 2 EUR | Union handling fee 800 |
| Ivory Coast CI | 02-12-2019 | 0 % | Préférence tarifaire 142 | |
2000 | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000 | 03-10-2025 | 0 % | Préférence tarifaire 142 |
| Cameroon CM | 04-08-2014 | 0 % | Préférence tarifaire 142 | |
| Belarus BY | 05-06-2022 | Interdiction d'importation 277 | ||
XL | Melilla XL | 07-12-2003 | 0 % | Acte d'adhésion0001/85 Préférence tarifaire 142 |
XC | Ceuta XC | 07-12-2003 | 0 % | Acte d'adhésion0001/85 Préférence tarifaire 142 |
| Occupied palestinian Territory PS | 07-12-2003 | 0 % | Préférence tarifaire 142 | |
1035 | SADC EPA 1035 | 10-10-2016 | 0 % | Préférence tarifaire 142 |
1034 | Eastern and Southern Africa States 1034 | 14-05-2012 | 0 % | Préférence tarifaire 142 |
| Ghana GH | 15-12-2016 – 31-12-2026 | 0 % | Préférence tarifaire 142 | |
| Israel IL | 16-05-2023 | 0 % | Préférence tarifaire 142 | |
| Solomon Islands SB | 17-05-2020 | 0 % | Préférence tarifaire 142 | |
| Papua New Guinea PG | 20-12-2009 | 0 % | Préférence tarifaire 142 | |
| Singapore SG | 21-11-2019 – 31-12-2026 | 0 % | Préférence tarifaire 142 | |
| Fiji FJ | 28-07-2014 | 0 % | Préférence tarifaire 142 | |
1033 | CARIFORUM 1033 | 29-12-2008 | 0 % | Préférence tarifaire 142 |
| Samoa WS | 31-12-2018 | 0 % | Préférence tarifaire 142 |
| Pays d'origine | Début | Droit / Impôt | Base légale Type de mesure | |
|---|---|---|---|---|
| Russian Federation RU | 19-12-2023 – 31-12-2027 | Document requis interdit sans document | Contrôle à l'importation 763 | |
1008 | All third countries 1008 | 19-12-2023 – 31-12-2027 | Document requis interdit sans document | Contrôle à l'importation 763 |
| Ukraine UA | 24-06-2026 | Document requis interdit sans document | Contrôle à l'importation 762 | |
| Ukraine UA | 24-06-2026 | Document requis interdit sans document | Contrôle à l'importation 760 |
Explication des restrictions commerciales
Erga Omnes signifie "pour tous".
Les pays tiers sont des pays qui n'appartiennent pas à l'UE.
Le SPG signifie 'Système de préférences généralisées'.
Le SPG+ signifie 'Système de préférences généralisées Plus'.
European Economic Area (EEA) signifie tous les États membres de l'UE et l'Islande, le Liechtenstein et la Norvège.
Les PTOM sont des "Pays et territoires d'outre-mer". Ils ne sont pas membres de l'UE. Plus d'informations
'CARIFORUM est une organisation régionale d'intégration économique comprenant 15 États membres de la Communauté des Caraïbes (CARICOM) et la République dominicaine.'
'L'APE SADC signifie "Southern African Development Community - Economic Partnership Agreement" (Accord de partenariat économique).'
Droit signifie "droit de douane".
Estimer le coût d’importation pour 7325000000
- Valeur en douane 1 000,00 €
- Aucun droit des pays tiers n’est enregistré pour cette origine.
- TVA à l’importation 20 % 200,00 €
- Total 1 200,00 €
Peut être inférieur sous conditions :
- Airworthiness tariff suspension: 0 %
Documents et contrôles pour Chine
Simple estimation. La valeur en douane est le prix incluant le transport et l’assurance jusqu’à la frontière de l’UE. Les accises, autres redevances et droits antidumping propres à un producteur ne sont pas inclus. Les taux préférentiels exigent une preuve d’origine valable. Groupes de pays et exclusions : TARIC, au novembre 2026.
Mesures à l’exportation pour 7325000000
Ce qui s’applique quand ces marchandises quittent l’UE : contrôles à l’exportation, autorisations (biens à double usage et autres), interdictions par destination et unité supplémentaire de la déclaration d’exportation.
| Destination | Début | Droit / Impôt | Base légale Type de mesure | |
|---|---|---|---|---|
| North Korea (Democratic People’s Republic of Korea) KP | 28-02-2018 | Export prohibition 278 |
| Destination | Début | Droit / Impôt | Base légale Type de mesure | |
|---|---|---|---|---|
| Belarus BY | 24-04-2026 | Document requis interdit sans document | Export control 766 | |
| Russian Federation RU | 26-07-2026 | Document requis interdit sans document | Export control 709 | |
| Ukraine UA | 25-02-2025 | Document requis interdit sans document | Export control 709 | |
| Ukraine UA | 25-08-2022 | Document requis interdit sans document | Export control 767 |
Historique
Taux de droit et mesures pour ce code dans le temps (versions annuelles).
Règles d’origine préférentielles pour 7325000000
Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chili
EU-Algeria Association Agreement · Algérie
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Îles Féroé, Liechtenstein, Norvège, Suisse
EU-Egypt Association Agreement · Égypte
EU-Georgia DCFTA · Géorgie
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam
EU-Iceland FTA · Islande
EU-Jordan Association Agreement · Jordanie
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie
EU-Korea FTA · Corée du Sud
EU-Central America Association Agreement
EU-Lebanon Association Agreement · Liban
EU-Morocco Association Agreement · Maroc
EU-Moldova DCFTA · Moldavie
Pan-Euro-Mediterranean (PEM) Convention · Albanie, Andorre, Bosnie-Herzégovine, Égypte, Îles Féroé, Islande, Kosovo, Liechtenstein, Macédoine du Nord, Monténégro, Norvège, Palestine, Suisse, Turquie
EU-Singapore FTA · Singapour
EU-Tunisia Association Agreement · Tunisie
EU-Ukraine DCFTA · Ukraine
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product
EPA CARIFORUM
EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya
EPA Pacific · Fidji, Îles Salomon, Papouasie-Nouvelle-Guinée, Samoa
EU-Mexico Global Agreement · Mexique
EU-Palestine Interim Association Agreement · Palestine
EPA SADC · Afrique du Sud
Articles of iron or steel; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product
EU-Canada CETA · Canada
A change from any other heading.
EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product [95]
EPA Eastern and Southern Africa
Sheet piling / or: Manufacture from materials of heading No 7206
EU-Japan EPA · Japon
CTH
EU-Viet Nam FTA · Viêt Nam
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product.
Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets
Notes légales et notes explicatives pour 7325000000
Notes du chapitre 73
Notes 1. Dans ce chapitre, on entend par «fontes» les produits obtenus par moulage dans lesquels le fer prédomine en poids sur chacun des autres éléments et qui ne répondent pas à la composition chimique des aciers visés à la note 1, point d), du chapitre 72. 2. Aux fins du présent chapitre, le terme «fils» s'entend des produits obtenus à chaud ou à froid dont la coupe transversale, de forme quelconque, n'excède pas 16 millimètres dans sa plus grande dimension.
Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex
Règlements de classement de l’UE pour 7325000000
Règlements de la Commission qui ont classé des marchandises précises sous ce code. Ils lient les douanes de tous les États membres pour des marchandises identiques.
- 7325 99 10 18 févr. 2019 · Règlement sur EUR-Lex
Article circulaire d'un diamètre d'environ 500 mm et d'un poids d'environ 23 kg. Il est constitué de fonte à graphite sphéroïdal (fonte ductile, EN-GJS-500-7). L'article est recouvert de bitume noir qui sert de protection contre la corrosion.
Cet article est certifié selon la norme EN 124 (dispositifs de couronnement et de fermeture pour les zones de circulation utilisées par les piétons et les véhicules) et il est utilisé en tant que plaque d'égout (pour les égouts d'eau pluviale, par exemple). Voir l'image (1).
Motifs
Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée et par le libellé des codes NC 7325 , 7325 99 et 7325 99 90 . Le classement de l'article sous le code NC 7325 10 00 en tant qu'autre ouvrage moulé en fonte non malléable est exclu, étant donné que la fonte non malléable est non déformable sous une contrainte de compression, tandis que la fonte à graphite sphéroïdal est déformable sous une contrainte de traction et aussi, dans une certaine mesure, sous une contrainte de compression. La fonte à graphite sphéroïdal en tant que telle ne peut donc pas être considérée comme de la fonte non malléable (voir, par analogie, l'arrêt du 12 juillet 2018, Profit Europe, rendu dans les affaires jointes C-397/17 et C-398/17, EU:C:2018:564). Le classement de l'article sous le code NC 7325 99 10 en tant qu'autre ouvrage moulé en fonte malléable est également exclu, étant donné que la fonte à graphite sphéroïdal et la fonte malléable diffèrent de par leur composition et leur méthode de production. Quand bien même la fonte à graphite sphéroïdal présenterait des caractéristiques semblables à celles de la fonte malléable (EN-GJM), elle n'en constitue pas moins une catégorie distincte (EN-GJS) (voir, par analogie, l'arrêt du 12 juillet 2018, Profit Europe, rendu dans les affaires jointes C-397/17 et C-398/17). Il convient dès lors de classer l'article sous le code NC 7325 99 90 en tant qu'«autre ouvrage moulé d'un autre type de fonte».
Classé à l’époque sous 7325 99 90
- 7325 99 90 18 févr. 2019 · Règlement sur EUR-Lex
Article circulaire d'un diamètre d'environ 500 mm et d'un poids d'environ 23 kg. Il est constitué de fonte à graphite sphéroïdal (fonte ductile, EN-GJS-500-7). L'article est recouvert de bitume noir qui sert de protection contre la corrosion.
Cet article est certifié selon la norme EN 124 (dispositifs de couronnement et de fermeture pour les zones de circulation utilisées par les piétons et les véhicules) et il est utilisé en tant que plaque d'égout (pour les égouts d'eau pluviale, par exemple). Voir l'image (1).
Motifs
Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée et par le libellé des codes NC 7325 , 7325 99 et 7325 99 90 . Le classement de l'article sous le code NC 7325 10 00 en tant qu'autre ouvrage moulé en fonte non malléable est exclu, étant donné que la fonte non malléable est non déformable sous une contrainte de compression, tandis que la fonte à graphite sphéroïdal est déformable sous une contrainte de traction et aussi, dans une certaine mesure, sous une contrainte de compression. La fonte à graphite sphéroïdal en tant que telle ne peut donc pas être considérée comme de la fonte non malléable (voir, par analogie, l'arrêt du 12 juillet 2018, Profit Europe, rendu dans les affaires jointes C-397/17 et C-398/17, EU:C:2018:564). Le classement de l'article sous le code NC 7325 99 10 en tant qu'autre ouvrage moulé en fonte malléable est également exclu, étant donné que la fonte à graphite sphéroïdal et la fonte malléable diffèrent de par leur composition et leur méthode de production. Quand bien même la fonte à graphite sphéroïdal présenterait des caractéristiques semblables à celles de la fonte malléable (EN-GJM), elle n'en constitue pas moins une catégorie distincte (EN-GJS) (voir, par analogie, l'arrêt du 12 juillet 2018, Profit Europe, rendu dans les affaires jointes C-397/17 et C-398/17). Il convient dès lors de classer l'article sous le code NC 7325 99 90 en tant qu'«autre ouvrage moulé d'un autre type de fonte».
Renseignements tarifaires du Royaume-Uni pour 7325000000
Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.
- UK 7325100099 Valable du 13 janv. 2025 au 12 janv. 2028 · Décision 600012266 sur GOV.UK
The non-malleable cast iron weights are used to add weight to any item that needs ballast adding to it so it can be stabilised. They can be used to hold down parasols, gazebos, café barriers, road signs etc. The weights are made from Cast Iron it is a one piece casting cast in Iron it is a round disc with a slot in it that enables it to be slid over a tube and then rest on a foot plate . it also has slots so that you can carry the item easily and has holes in it so that metal pegs can be pushed trough it to stop it skidding around they are either packed individually or in pairs in a cardboard box.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel GIR 5 (b) has been used to identify the packaging - Package in a box GIR 6 has been used to classify the goods to subheading level 732510 - Of non-malleable cast iron 10 Digit code 7325100099 – Other than elsewhere specified in this subheading Also classified in accordance with: Note 3 to Section XV Note 1 to Chapter 73 Harmonized System Explanatory Notes to heading 73.25.
- UK 7325100099 Valable du 22 avr. 2026 au 21 avr. 2029 · Décision 600014696 sur GOV.UK
The product is an Ni-Resist Mechanical Seal Face and is one of the two seal faces in a mechanical seal assembly. The metal seal face is presented on its own without any elastomers or additional elements. Manufactured from cast nickel-iron alloy tubes using CNC or manual machining processes. Ni-resist iron is an alloyed cast iron that typically contains 20-25% nickel and is non-malleable, austenitic and ductile. The primary sealing surface is finish polished by a lapping process, which is essential to the function of the mechanical seal assembly. Each seal face is custom-designed and combined with other mechanical seal elements to meet precise specifications and intended solely for specific mechanical seals used in industrial rotary applications, to prevent leakage between rotating and stationary elements.
Justification
For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 6 - Has been used to classify the goods to subheading level 732510 - Of non-malleable cast iron. 10 Digit code 7325100099 - Other than elsewhere specified; other than lamellar graphite cast iron (grey iron), and parts thereof, of a kind used to: – cover ground or sub-surfaces systems, and/or openings to ground or sub-surface systems, and also – give access to ground or sub-surface systems and/or provide view to ground or sub-surface systems. Also classified in accordance with: Section notes 3 to section XV. Chapter notes 1 to chapter 73. The Harmonized System …
- UK 7325991090 Valable du 11 sept. 2025 au 10 sept. 2028 · Décision 600012976 sur GOV.UK
The item is a Christmas tree stand made from malleable cast iron. The heavyweight design allows a tree to fit into a socket and be secured in place using the metal bolts supplied. There are two socket sizes, four or five inches and these are also used to hold water. The tree stands are finished with hand painted decorative designs in gold.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel GIR 6 has been used to classify the goods to subheading level 7325 99 – Other than of non-malleable cast iron; Other than Grinding balls and similar articles for mills. 8-digit code 732599 10 Of cast iron. 10-digit code 73259910 90 – Other than elsewhere specified. Also classified in accordance with: Section notes 3 to Section XV Chapter notes 1 to chapter 73 Harmonised System Explanatory Notes (HSEN) to 7325
+ 7 de plus
- UK 7325991090 Valable du 26 févr. 2026 au 25 févr. 2029 · Décision 600014996 sur GOV.UK
A pair of Andirons (Circa 1937) designed by Melchiorre Bega (1894–1974). The andirons are constructed of both cast iron and brass, with iron providing structural strength and brass used for the sculptural decorative elements. Dimensions: Each: 25.4 x 21.6 x 36.2 cm (10 x 8 1/2 x 14 1/4 in.).
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel GIR 3B - has been used as the Cast Iron is considered to be the essential character. GIR 6 has been used to classify the goods to subheading level 7325 99 – Other than of non-malleable cast iron; Other than Grinding balls and similar articles for mills. 8-digit code 732599 10 Of cast iron. 10-digit code 73259910 90 – Other than elsewhere specified. Also classified in accordance with: Section notes 3 to Section XV Chapter notes 1 to …
- UK 7325991090 Valable du 17 août 2026 au 16 août 2029 · Décision 600015604 sur GOV.UK
This ruling is for the ABR Articulated Bend Restrictors only. The ABR's provide protection and additional weight to the cable to aid the transition into burial. The component is manufactured from Spheroidal Graphite Iron grade EN-GJS-450-10. Each male spigot at either end rotates and locks out within the female collar within the subsequent component to form a bend radius suitable for both installation over-boarding and operational conditions. The 2.5m of ABR's will be provided with epoxy coating and independent cathodic protection.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other 8 Digit Code 73259910 - Of Cast Iron. 10 Digit Code 7325991090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325
- UK 7325991090 Valable du 7 oct. 2026 au 6 oct. 2029 · Décision 600016156 sur GOV.UK
Cast Iron Inserts PN-002-004-590 & PN-002-004-591 The cast elements are manufactured from Spheroidal Graphite Iron (SGI) in accordance with EN 1563. Spheroidal Graphite Cast Irons, grade EN-GJS-450-10. Typical Chemical Composition (controlled at supplier/foundry level): - Carbon (C): 3.4 – 3.9 % Silicon (Si): 2.2 – 2.8 % Manganese (Mn): ≤ 0.30 % Phosphorus (P): ≤ 0.05 % Sulphur (S): ≤ 0.02 % Magnesium (Mg): 0.03 – 0.06 % (residual, to ensure spheroidal graphite formation) Iron (Fe): Balance Minor alloying elements such as Copper (Cu), Nickel (Ni), or Molybdenum (Mo) may be added in controlled and limited quantities when required to achieve the specified mechanical properties. Minimum Tensile Strength: ≥ 450 MPa, and Minimum Elongation: ≥ 10 %. The cast elements are produced using a Green Sand Casting Process with an automated High Pressure Moulding Line (HPML). Raw Material Charging and Melting Approved base iron, steel scrap, and internal returns are charged into an induction furnace. The molten iron is treated with magnesium-based alloys to convert graphite into a spheroidal (nodular) form. Green Sand (HPML) Moulds are produced on an automated high-pressure moulding line using green sand composed of silica sand, bentonite clay, water, and additives. HPML ensures high dimensional accuracy, repeatability, and stable mould quality. Molten SGI is poured into the prepared moulds under controlled temperature and pouring conditions. Castings are allowed to solidify and cool under controlled conditions to minimize defects. After cooling castings are removed from the moulds. Gates, risers, and excess material are removed through fettling operations such as cutting and grinding. For use in the offshore energy industry for pipeline protection. Insert is over moulded within a polymer product to provide asset protection, impact resistance and stabilization. Usually packed in crates.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other. 8 Digit Code 73259910 - Of cast iron. 10 Digit Code - 7325991090 - Other. Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325
- UK 7325991090 Valable du 8 oct. 2026 au 7 oct. 2029 · Décision 600016159 sur GOV.UK
A 205ID MIU MANDREL of Cast Iron Composition. The materials are Grade ISO 1083 / JS / 450-10. Ductile iron, is a high-performance cast material in which graphite exists in the form of spherical nodules. It is a ferritic-matrix ductile iron characterized by a minimum tensile strength of 450 MPa, elongation of 10%, and good impact toughness. A blend of pig iron, steel scrap, and returns in controlled ratios is melted in induction furnaces (medium-frequency) or cupolas at ~1500–1550°C. Magnesium-bearing alloys are introduced via ladle treatment. Pouring is performed at 1300–1400°C with controlled gating to minimize turbulence and oxidation. Proper riser design and use of chills ensure directional solidification and minimize shrinkage defects. Cleaned by using a shot blasting machine. For use in the offshore energy industry for pipeline protection. Insert is over moulded within a polymer product to provide asset protection, impact resistance and stabilization. Usually packed in crates.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other 8 Digit Code 73259910 - Of cast iron 10 Digit Code 7325991090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325.
- UK 7325991090 Valable du 8 oct. 2026 au 7 oct. 2029 · Décision 600016181 sur GOV.UK
A 205ID MIU MANDREL of Cast Iron Composition. The materials are Grade ISO 1083 / JS / 450-10. Ductile iron, is a high-performance cast material in which graphite exists in the form of spherical nodules. It is a ferritic-matrix ductile iron characterized by a minimum tensile strength of 450 MPa, elongation of 10%, and good impact toughness. A blend of pig iron, steel scrap, and returns in controlled ratios is melted in induction furnaces (medium-frequency) or cupolas at ~1500 1550°C. Magnesium-bearing alloys are introduced via ladle treatment. Pouring is performed at 1300 1400°C with controlled gating to minimize turbulence and oxidation. Proper riser design and use of chills ensure directional solidification and minimize shrinkage defects. Cleaned by using a shot blasting machine. For use in the offshore energy industry for pipeline protection. Insert is over moulded within a polymer product to provide asset protection, impact resistance and stabilization. Usually packed in crates.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other 8 Digit Code 73259910 - Of cast iron 10 Digit Code 7325991090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325.
- UK 7325991090 Valable du 13 oct. 2026 au 12 oct. 2029 · Décision 600016182 sur GOV.UK
A 205ID JIU BODY of Cast Iron Composition. The materials are Grade ISO 1083 / JS / 450-10. Ductile iron, is a high-performance cast material in which graphite exists in the form of spherical nodules. It is a ferritic-matrix ductile iron characterized by a minimum tensile strength of 450 MPa, elongation of 10%, and good impact toughness. A blend of pig iron, steel scrap, and returns in controlled ratios is melted in induction furnaces (medium-frequency) or cupolas at ~1500 1550°C. Magnesium-bearing alloys are introduced via ladle treatment and Pouring is performed at 1300 1400°C with controlled gating to minimize turbulence and oxidation. Proper riser design and use of chills ensure directional solidification and minimize shrinkage defects. Cleaned by using a shot blasting machine. For use in the offshore energy industry for pipeline protection. Insert is over moulded within a polymer product to provide asset protection, impact resistance and stabilization. Usually packed in crates.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other 8 Digit Code 73259910 - Of Cast Iron. 10 Digit Code 7325991090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325
- UK 7325999090 Valable du 1 déc. 2023 au 30 nov. 2026 · Décision 600009280 sur GOV.UK
The yokes are steel castings used to operate and control the steering and rudder planes of a submarine, the planes are the method a submarine steers whilst in the water, they also control when the submarine dives or surfaces. They are made from HY80 Grade of Steel. The yokes require no specific packaging, will be packed suitably for sea shipment.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s Gir 1 has been used to classify this product by the terms of heading 7325 for other cast articles of iron or steel Gir 5 (b) has been used to identify the type of packaging Gir 6 has been used to classify the goods to subheading level 732599 for other than; of non-malleable cast iron and other than; grinding balls and similar articles for mills Eight digit code 73259990 for other than; of malleable cast iron Ten digit code 7325999090 for other than elsewhere specified in this commodity code Also classified in accordance with Note 3 to Section XV Harmonised System Explanatory Notes (HSEN) to Heading 7325
Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.
Restrictions et signalements pour 7325000000
- Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XVII 7325
Art. 3 octies, produits sidérurgiques
Lire l’acte sur EUR-Lex - Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 7325
Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie
Lire l’acte sur EUR-Lex
À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.
TVA à l’importation dans l’UE
- Allemagne 19 %
- Autriche 20 %
- Belgique 21 %
- Bulgarie 20 %
- Chypre 19 %
- Croatie 25 %
- Danemark 25 %
- Espagne 21 %
- Estonie 24 %
- Finlande 25,5 %
- France 20 %
- Grèce 24 %
- Hongrie 27 %
- Irlande 23 %
- Italie 22 %
- Lettonie 21 %
- Lituanie 21 %
- Luxembourg 17 %
- Malte 18 %
- Pays-Bas 21 %
- Pologne 23 %
- Portugal 23 %
- Roumanie 21 %
- Slovaquie 23 %
- Slovénie 22 %
- Suède 25 %
- Tchéquie 21 %
Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.
Règles d’origine
Les règles d’origine préférentielles de la sous-position 732500 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.
Règles d’origine sur Access2MarketsInformations
Lorsque vous importez ou exportez "Autres ouvrages moulés en fonte, fer ou acier", il est important d'avoir le bon code SH ou code TARIC. Le code HS 7325000000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.
Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Autres ouvrages moulés en fonte, fer ou acier", veuillez noter les points suivants :
- Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Autres ouvrages moulés en fonte, fer ou acier".
- Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Autres ouvrages moulés en fonte, fer ou acier" dans le pays de destination ou l'exporter depuis le pays d'origine.
- Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
- Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
- Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.
En résumé, le code HS-Code ou le code TARIC pour "Autres ouvrages moulés en fonte, fer ou acier" est 7325000000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Autres ouvrages moulés en fonte, fer ou acier".
Structure du HS-Code
1. Chapitre
Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 73 a été sélectionné pour ouvrages en fonte, fer ou acier
2. Titre
Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 25 se réfère à Autres ouvrages moulés en fonte, fer ou acier.
Arborescence HS-Code
7300000000 80
Chapitre OUVRAGES EN FONTE, FER OU ACIER
7325000000 80
Autres ouvrages moulés en fonte, fer ou acier
7325100000 80
- en fonte non malléable
7325100010 80
- - Grilles de caniveau et couvercles en fonte relevant de la norme EN 1433, destinés à être utilisés comme composants de caniveaux en polymère, en plastique, en acier galvanisé ou en béton permettant aux eaux de surface de s'écouler dans le caniveau
7325100015 80
- - Avaloirs de sol et de toit, ouvertures de nettoyage et couvercles pour ces ouvertures relevant de la norme EN 1253
7325100020 80
- - Echelons, clefs de levage et bouches d'incendie
7325100031 10
- - autres
7325100031 80
- - - Articles en fonte à graphite lamellaire (fonte grise), et des pièces s'y rapportant, d'un type utilisé pour: - couvrir et/ou donner accès à des systèmes affleurant le sol ou souterrains, et - permettre un accès physique et/ou visuel à de tels systèmes
7325100099 80
- - - autres
7325910000 10
- autres
7325910000 80
- - Boulets et articles similaires pour broyeurs
7325990000 80
- - autres
7325991000 80
- - - en fonte
7325991031 80
- - - - Grilles de caniveau et couvercles en fonte relevant de la norme EN 1433, destinés à être utilisés comme composants de caniveaux en polymère, en plastique, en acier galvanisé ou en béton permettant aux eaux de surface de s'écouler dans le caniveau
7325991035 80
- - - - Avaloirs de sol et de toit, ouvertures de nettoyage et couvercles pour ces ouvertures relevant de la norme EN 1253
7325991040 80
- - - - Echelons, clefs de levage et bouches d'incendie
7325991060 80
- - - - Articles en fonte à graphite sphéroïdal (également appelée fonte ductile), et des pièces s'y rapportant, d'un type utilisé pour: - couvrir et/ou donner accès à des systèmes affleurant le sol ou souterrains, et - permettre un accès physique et/ou visuel à de tels systèmes
7325991090 80
- - - - autres
7325999000 80
- - - autres
7325999010 80
- - - - Colliers, brides et dispositifs de soutien, de raccordement, de serrage ou d'espacement, destinés à certains types de véhicules aériens
7325999020 80
- - - - Dispositifs pour l'arrimage et le verrouillage du fret, destinés à certains types de véhicules aériens
7325999030 80
- - - - Billes utilisées dans le système de chargement du fret, destinées à certains types de véhicules aériens
7325999090 80
- - - - autres