Nouveau Décrivez un produit, obtenez le code NC. Aussi en API et MCP pour les agents IA. Essai gratuit
Aller au contenu

Numéro tarifaire 7607000000 80 - Feuilles et bandes minces en aluminium (même imprimées ou fixées sur papier, carton, matières plastiques ou supports similaires) d'une épaisseur n'excédant pas 0,2 mm (support non compris)

M’alerter par e-mail

Restrictions commerciales pour l'importation de marchandises pour 7607000000 80

Cette table contient des informations sur les restrictions commerciales pour l'importation de marchandises dans l'UE et l'UE dans les pays tiers. Le tableau contient des informations sur les les restrictions commerciales dues à des unions douanières, des préférences, des quotas tarifaires, les unions douanières, les contrôles vétérinaires, les droits de douane des pays tiers et les quotas tarifaires non préférentiels quotas.

Droits 60
GB
United Kingdom GB
01-01-2025
0 %
Quota tarifaire préférentiel 143
BA
Bosnia and Herzegovina BA
01-01-2009
0 %
Préférence tarifaire 142
MK
North Macedonia MK
01-01-2009
0 %
Préférence tarifaire 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Préférence tarifaire 142
EC
Ecuador EC
01-01-2017
0 %
Préférence tarifaire 142
XS
Serbia XS
01-02-2010
0 %
Préférence tarifaire 142
PE
Peru PE
01-03-2013
0 %
Préférence tarifaire 142
AL
Albania AL
01-04-2009
0 %
Préférence tarifaire 142
XK
Kosovo XK
01-04-2016
0 %
Préférence tarifaire 142
ME
Montenegro ME
01-05-2010
0 %
Préférence tarifaire 142
CO
Colombia CO
01-08-2013
0 %
Préférence tarifaire 142
2200
Central America 2200
01-08-2013
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Suspension tarifaire de la conformité aérienne 119
ZA
South Africa ZA
10-10-2016
0 %
Préférence tarifaire 142
1006
EU-Canada agreement: re-imported goods 1006
21-09-2017
0 %
Préférence tarifaire 142
CA
Canada CA
21-09-2017
0 %
Préférence tarifaire 142
FO
Faroe Islands FO
01-01-1997
0 %
Préférence tarifaire 142
XL
Melilla XL
01-01-1999
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Préférence tarifaire 142
SM
San Marino SM
01-01-2006
0 %
Droit de l'union douanière 106
TR
Türkiye TR
01-01-2006
0 %
Droit de l'union douanière 106
AD
Andorra AD
01-01-2006
0 %
Droit de l'union douanière 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Préférence tarifaire 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Préférence tarifaire 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Préférence tarifaire 142
GB
United Kingdom GB
01-01-2021
0 %
Préférence tarifaire 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Préférence tarifaire 142
SG
Singapore SG
01-01-2027
0 %
Préférence tarifaire 142
GH
Ghana GH
01-01-2027
0 %
Préférence tarifaire 142
CL
Chile CL
01-02-2025
0 %
Préférence tarifaire 142
TN
Tunisia TN
01-03-1998
0 %
Préférence tarifaire 142
MA
Morocco MA
01-03-2000
0 %
Préférence tarifaire 142
LB
Lebanon LB
01-04-2006
0 %
Préférence tarifaire 142
JO
Jordan JO
01-05-2002
0 %
Préférence tarifaire 142
EG
Egypt EG
01-06-2004
0 %
Préférence tarifaire 142
XC
Ceuta XC
01-07-1991
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Préférence tarifaire 142
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Préférence tarifaire 142
MX
Mexico MX
01-07-2016
0 %
Préférence tarifaire 142
KE
Kenya KE
01-07-2024
0 %
Préférence tarifaire 142
US
United States US
01-07-2026
0 %
Préférence tarifaire 142
SY
Syria SY
01-08-1994
0 %
Préférence tarifaire 142
DZ
Algeria DZ
01-09-2005
0 %
Préférence tarifaire 142
GE
Georgia GE
01-09-2014
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Préférence tarifaire 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Préférence tarifaire 142
CM
Cameroon CM
04-08-2014
0 %
Préférence tarifaire 142
1035
SADC EPA 1035
10-10-2016
0 %
Préférence tarifaire 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Préférence tarifaire 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Préférence tarifaire 142
IL
Israel IL
16-05-2023
0 %
Préférence tarifaire 142
SB
Solomon Islands SB
17-05-2020
0 %
Préférence tarifaire 142
CH
Switzerland CH
20-12-1972
0 %
Préférence tarifaire 142
PG
Papua New Guinea PG
20-12-2009
0 %
Préférence tarifaire 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Préférence tarifaire 142
FJ
Fiji FJ
28-07-2014
0 %
Préférence tarifaire 142
1033
CARIFORUM 1033
29-12-2008
0 %
Préférence tarifaire 142
WS
Samoa WS
31-12-2018
0 %
Préférence tarifaire 142
Contrôles et documents 5
1008
All third countries 1008
01-01-2026
– 31-12-2026
Document requis
interdit sans document
Carbon Border Adjustment Mechanism - CBAM 775
RU
Russian Federation RU
21-03-2024
– 31-12-2027
Document requis
interdit sans document
Contrôle à l'importation 762
BY
Belarus BY
25-02-2025
Document requis
interdit sans document
Contrôle à l'importation 760
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 762
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 760

Explication des restrictions commerciales

Erga Omnes signifie "pour tous".

Les pays tiers sont des pays qui n'appartiennent pas à l'UE.

Le SPG signifie 'Système de préférences généralisées'.

Le SPG+ signifie 'Système de préférences généralisées Plus'.

European Economic Area (EEA) signifie tous les États membres de l'UE et l'Islande, le Liechtenstein et la Norvège.

Les PTOM sont des "Pays et territoires d'outre-mer". Ils ne sont pas membres de l'UE. Plus d'informations

'CARIFORUM est une organisation régionale d'intégration économique comprenant 15 États membres de la Communauté des Caraïbes (CARICOM) et la République dominicaine.'

'L'APE SADC signifie "Southern African Development Community - Economic Partnership Agreement" (Accord de partenariat économique).'

Droit signifie "droit de douane".

Estimer le coût d’importation pour 7607000000

  • Valeur en douane 1 000,00 €
  • Aucun droit des pays tiers n’est enregistré pour cette origine.
  • TVA à l’importation 20 % 200,00 €
  • Total 1 200,00 €

Peut être inférieur sous conditions :

  • Airworthiness tariff suspension: 0 %

Documents et contrôles pour Chine

Simple estimation. La valeur en douane est le prix incluant le transport et l’assurance jusqu’à la frontière de l’UE. Les accises, autres redevances et droits antidumping propres à un producteur ne sont pas inclus. Les taux préférentiels exigent une preuve d’origine valable. Groupes de pays et exclusions : TARIC, au novembre 2026.

Mesures à l’exportation pour 7607000000

Ce qui s’applique quand ces marchandises quittent l’UE : contrôles à l’exportation, autorisations (biens à double usage et autres), interdictions par destination et unité supplémentaire de la déclaration d’exportation.

Mesures 1
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Export prohibition 278
Contrôles et documents 3
BY
Belarus BY
20-07-2025
Document requis
interdit sans document
Export control 766
UA
Ukraine UA
25-02-2025
Document requis
interdit sans document
Export control 709
UA
Ukraine UA
25-08-2022
Document requis
interdit sans document
Export control 767

Historique

Taux de droit et mesures pour ce code dans le temps (versions annuelles).

Règles d’origine préférentielles pour 7607000000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chili

    EU-Algeria Association Agreement · Algérie

    EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Îles Féroé, Liechtenstein, Norvège, Suisse

    EU-Egypt Association Agreement · Égypte

    EU-Georgia DCFTA · Géorgie

    EU-Jordan Association Agreement · Jordanie

    EU-Morocco Association Agreement · Maroc

    EU-Moldova DCFTA · Moldavie

    Pan-Euro-Mediterranean (PEM) Convention · Albanie, Andorre, Bosnie-Herzégovine, Égypte, Îles Féroé, Islande, Kosovo, Liechtenstein, Macédoine du Nord, Monténégro, Norvège, Palestine, Suisse, Turquie

    EU-Tunisia Association Agreement · Tunisie

    EU-Ukraine DCFTA · Ukraine

    Aluminium and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie

    EU-Korea FTA · Corée du Sud

    EU-Central America Association Agreement

    EU-Singapore FTA · Singapour

    Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm / or: Manufacture from materials of any heading, except that of the product and heading 7606

  • EPA CARIFORUM

    EPA Pacific · Fidji, Îles Salomon, Papouasie-Nouvelle-Guinée, Samoa

    Aluminium and articles thereof; except for: / or: Manufacture in which: – all the materials used are classified within a heading other than that of the product; – the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading; or A change from within this heading, whether or not there is also a change from any other heading, provided that the value of non-originating materials of this heading does not exceed 50 per cent of the transaction value or ex-works price of the product.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

    Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness not exceeding 0,2 mm / or: Manufacture from materials of any heading, except those of headings 7606 and 7607 / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Unwrought aluminium / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; and the value of all the materials used does not exceed 50 % of the ex-works price of the product / or: Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium

  • EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

    Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

    Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm / or: Manufacturefrom materials of any heading, except that of the product and heading 7606

  • EU-Iceland FTA · Islande

    Aluminium and articles thereof; except for: / or: Manufacture: – from materials of any heading, except that of the product, and – in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Japan EPA · Japon

    CTH except from heading 76.06.

  • EU-Lebanon Association Agreement · Liban

    Aluminium and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Mexico Global Agreement · Mexique

    Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product, the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50% of the ex-works price of the product

  • EPA SADC · Afrique du Sud

    Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50 % of the ex–works price of the product

  • EU-Viet Nam FTA · Viêt Nam

    aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm; and / or: Manufacture from materials of any heading, except that of the product and heading 7606.

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 7607000000

Notes du chapitre 76

Notes de sous-positions Notes complémentaires 1. Au sens des sous-positions 7601 10 10, 7601 20 30 et 7601 20 40, on entend par: — «plaques»: produits sous forme brute qui ont une section transversale pleine et constante sur toute leur longueur de forme rectangulaire ou plus généralement polygonale, d'une largeur excédant 800 mm, d'une épaisseur excédant 280 mm et dont la longueur est toujours supérieure à la largeur et à l'épaisseur. Ces produits sont destinés au laminage; — «billettes»: produits sous forme brute qui ont une section transversale pleine et constante sur toute leur longueur de forme circulaire (y compris les «cercles aplatis»), d'un diamètre excédant 125 mm. 2. Au sens des sous-positions 7606 12 11 et 7606 12 19, on entend par: — «bandes pour corps de boîtes boisson»: les tôles ou bandes enroulées, laminées, dont le manganèse et le magnésium sont les éléments d’alliage principaux et d’une résistance minimale à la traction de 262 MPa. Ces tôles ou bandes ont une section transversale pleine et constante sur toute leur longueur, sont d’une largeur égale ou supérieure à 300 mm mais n’excédant pas 2 000 mm, d’une épaisseur supérieure à 0,2 mm mais n’excédant pas 0,4 mm, et d’une longueur toujours supérieure à la largeur et à l’épaisseur. Les bandes pour corps de boîtes boisson sont prélubrifiées, avec une surface brillante; — «bandes pour couvercles de boîtes boisson et bandes pour anneaux de boîtes boisson»: les tôles ou bandes enroulées, dont l’élément d’alliage principal est le magnésium et d’une résistance minimale à la traction de 345 MPa. Ces tôles ou bandes ont une section transversale pleine et constante sur toute leur longueur, sont d’une largeur égale ou supérieure à 30 mm mais n’excédant pas 2 000 mm, d’une épaisseur supérieure à 0,2 mm mais n’excédant pas 0,35 mm, et d’une longueur toujours supérieure à la largeur et à l’épaisseur. Les bandes pour couvercles de boîtes boisson sont vernies des deux côtés. Les bandes pour anneaux de boîtes boisson sont dégraissées et huilées. Ces produits sont destinés à la fabrication de boîtes boisson rigides, y compris les couvercles et les anneaux. 3. Au sens des sous-positions 7606 11 30, 7606 12 30 et 7607 20 91, on entend par: — «panneau composite en aluminium» : les produits stratifiés constitués de deux feuillets ou feuilles d’aluminium laminés plats, alliés ou non, chacun(e) ayant une épaisseur de 0,08 mm ou plus mais n’excédant pas 0,55 mm, et une âme continue en matière polymère ou minérale non poreuse, maintenus ensemble au moyen d’un adhésif, d’une épaisseur totale de 1,0 mm ou plus mais n’excédant pas 6,1 mm. Les deux feuillets ou feuilles extérieures en aluminium peuvent avoir des finitions différentes. Ces produits ne peuvent pas être enroulés.

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Renseignements tarifaires du Royaume-Uni pour 7607000000

Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.

  • UK 7607111119 Valable du 15 nov. 2023 au 14 nov. 2026 · Décision 600007951 sur GOV.UK

    Aluminium kitchen foil. Presented in a roll measuring 8m x 30cm in a cardboard box with perforated edge for cutting the foil. The foil is 0.01mm thick. For kitchen use to aid with baking, grilling and storing/wrapping foods.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7607 - Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm GIR 5b has been used to identify the type of packaging – cardboard box GIR 6 has been used to classify the goods to subheading level 760711 - Not backed; Rolled but not further worked 8 Digit Code 76071111 - Of a thickness of less than 0.021 mm; In rolls of a weight not exceeding 10 kg 10 Digit Code 7607111119 - Of a thickness of 0.007 mm or more but less than 0.021 mm; other …

  • UK 7607111119 Valable du 15 nov. 2023 au 14 nov. 2026 · Décision 600007952 sur GOV.UK

    Aluminium kitchen foil. Presented in a roll measuring 5m x 45cm in a cardboard box with perforated edge for cutting the foil. The foil is 0.01mm thick. For kitchen use to aid with baking, grilling and storing/wrapping foods.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7607 - Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm GIR 5b has been used to identify the type of packaging – cardboard box GIR 6 has been used to classify the goods to subheading level 760711 - Not backed; Rolled but not further worked 8 Digit Code 76071111 - Of a thickness of less than 0.021 mm; In rolls of a weight not exceeding 10 kg 10 Digit Code 7607111119 - Of a thickness of 0.007 mm or more but less than 0.021 mm; other …

  • UK 7607111119 Valable du 3 nov. 2025 au 2 nov. 2028 · Décision 600013808 sur GOV.UK

    The product is aluminium foil, used for wrapping or storing food. Aluminium Smelted aluminium ingot rolled into thin rolls. The roll measures in thickness from nine micron to twenty micron, and length can be from ten metre to forty metre and rolls are less than 10kg in weight. Packaged in individual boxes with a perforated edge to cut the foil. The consignment is not from Thailand.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7607 - Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm GIR 5b has been used to identify the type of packaging – cardboard box. GIR 6 has been used to classify the goods to subheading level 760711 - Not backed; Rolled but not further worked. 8 Digit Code 76071111 - Of a thickness of less than 0.021 mm; In rolls of a weight not exceeding 10 kg. 10 Digit Code 7607111119 - Of a thickness of 0.007 mm or more but less than 0.021 mm; other …

+ 7 de plus
  • UK 7607111119 Valable du 3 mars 2026 au 2 mars 2029 · Décision 600014587 sur GOV.UK

    The product is aluminium foil, used for wrapping or storing food. Aluminium foil is on a cardboard roll and is 30cm x 20cm with a thickness of 0.01mm and a weight of 160g (excluding the cardboard roll it is wound around). The consignment is not from Thailand. Aluminium foil is unbacked and annealed.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7607 - Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm GIR 5b has been used to identify the type of packaging – cardboard box. GIR 6 has been used to classify the goods to subheading level 760711 - Not backed; Rolled but not further worked. 8 Digit Code 76071111 - Of a thickness of less than 0.021 mm; In rolls of a weight not exceeding 10 kg. 10 Digit Code 7607111119 - Of a thickness of 0.007 mm or more but less than 0.021 mm; other …

  • UK 7607111994 Valable du 13 août 2024 au 12 août 2027 · Décision 600011034 sur GOV.UK

    The Household Aluminium foil is in Jumbo rolls, the thickness of product is from 9.5-20 Micron (0.0095 - 0.020mm). The weight is from 650-900kg. It is not backed but rolled and not further worked. To product is used to cover foodstuff while cooking and also wrapping foodstuffs. The Jumbo reels are packed into wooden crates

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7607 - Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm GIR 5 (b) - has been used to identify the type of packaging - Packed into wooden crates GIR 6 - has been used to classify the goods to subheading level 760711 - Not Backed - Rolled but not further worked 8 DIGIT CODE - 76071119 - Of a thickness of less than 0.021mm. 10 DIGIT CODE - 7607111994 - Household aluminium foil Also classified in accordance with: Note 3 to …

  • UK 7607119096 Valable du 5 févr. 2026 au 4 févr. 2029 · Décision 600014788 sur GOV.UK

    Foil braze made from aluminium 4047 which is used to bond two pieces of aluminium together. Dimensions: 0.0762mm (0.003’’) thick x 457.2mm (18”) wide. The foil is supplied on a roll and stored inside a plastic bag.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7607 - Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm GIR 5 (b) - Has been used to identify the type of packaging. Packaged into rolls, stored in plastic packaging. GIR 6 - Has been used to classify the goods to subheading level 760711 – not backed; rolled but not further worked 8 Digit Code 76071190 - Of a thickness of not less than 0.021 mm but not more than 0.2 mm 10 Digit Code 7607119096 – other than elsewhere specified …

  • UK 7607191019 Valable du 29 juil. 2024 au 28 juil. 2027 · Décision 600010808 sur GOV.UK

    The product is household Aluminium foil. The foil is made from Aluminium metal and has been subjected to annealing after rolling until it is thin enough to be used domestically in the home. It is embossed with a hexagonal, honeycomb pattern and is used as and aid to cooking in the oven to prevent food burning and also to wrap food for storage in a fridge. It is packaged in a carton board dispensing carton and multiple rolls are packaged into a corrugated outer carton. Foil Thickness 9.5 micron (0.0095mm) to 20 micron (0.02mm) Foil length max 450mm Weight of the roll 500g The foil is not backed with any other material, and not consigned from Thailand.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7607 - Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm GIR 5 (b) - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 760719 - other 8 Digit Code 76071910 - Of a thickness of less than 0.021 mm 10 Digit Code 7607191019 - Of a thickness of 0.007 mm or more but less than 0.021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed - other Also classified in accordance with : …

  • UK 7607191090 Valable du 27 mars 2025 au 26 mars 2028 · Décision 600012574 sur GOV.UK

    Embossed aluminium foil on a roll. It is 15 microns thick (0.015mm), 13cm wide and 98m in length and weighs 0.536Kg. The foil is printed with solvent based ink and comes in various coloured patterns and designs. It packaged in a branded cardboard box. The foil is used in hair salons for hair colouring and highlighting treatments.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 7607 - Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm. GIR 5b - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 760719 - Not backed: Other than Rolled but not further worked. 8-digit code 76071910 - Of a thickness of less than 0.021 mm. 10-digit code 7607191090 - Other than of a thickness of 0.007 mm or more but less than 0.021 mm, in rolls of a weight not …

  • UK 7607191090 Valable du 27 mars 2025 au 26 mars 2028 · Décision 600012719 sur GOV.UK

    Aluminium foil on a roll, which is printed with colouring on one side. It is 15 microns thick (0.015mm), 12cm wide and 100m in length and weighs 0.562kg. The foil comes in a pink or lilac colour. It is packaged in a branded cardboard box. The foil is used in hair salons for hair colouring and highlighting treatments.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 7607 - Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm. GIR 5b - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 760719 - Not backed: Other than Rolled but not further worked. 8-digit code 76071910 - Of a thickness of less than 0.021 mm. 10-digit code 7607191090 - Other than of a thickness of 0.007 mm or more but less than 0.021 mm, in rolls of a weight not …

  • UK 7607209900 Valable du 18 juin 2025 au 17 juin 2028 · Décision 600013419 sur GOV.UK

    24 reels of foil tape. They are made mainly from aluminium. Comprising aluminium foil, coated on one side with adhesive, backed with releasing paper and wound onto a cardboard reel. The thickness of the foil itself (excluding the adhesive and paper backing) is approximately 0.065 mm. The width of each reel is between 50 and 75mm. The tape is moisture and chemical resistant and typical uses would include various non-sensitive joining applications.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7607 - Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm GIR 6 has been used to classify the goods to sub-heading 7607 20 – Backed Code to 8 digits - 7607 2099 – Of a thickness (excluding any backing) of not less than 0.021 mm but not more than 0.2 mm; other than aluminium composite panel Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) to heading – 7607

Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.

Restrictions et signalements pour 7607000000

  • CBAM : mécanisme d’ajustement carbone Règlement (UE) 2023/956, Annexe I 7607

    Secteur : aluminium

    Lire l’acte sur EUR-Lex
  • Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XXI 7607

    Art. 3 decies, biens qui procurent des recettes importantes à la Russie

    Lire l’acte sur EUR-Lex

À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.

TVA à l’importation dans l’UE

  • Allemagne 19 %
  • Autriche 20 %
  • Belgique 21 %
  • Bulgarie 20 %
  • Chypre 19 %
  • Croatie 25 %
  • Danemark 25 %
  • Espagne 21 %
  • Estonie 24 %
  • Finlande 25,5 %
  • France 20 %
  • Grèce 24 %
  • Hongrie 27 %
  • Irlande 23 %
  • Italie 22 %
  • Lettonie 21 %
  • Lituanie 21 %
  • Luxembourg 17 %
  • Malte 18 %
  • Pays-Bas 21 %
  • Pologne 23 %
  • Portugal 23 %
  • Roumanie 21 %
  • Slovaquie 23 %
  • Slovénie 22 %
  • Suède 25 %
  • Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Les règles d’origine préférentielles de la sous-position 760700 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.

Règles d’origine sur Access2Markets

Informations

Lorsque vous importez ou exportez "Feuilles et bandes minces en aluminium (même imprimées ou fixées sur papier, carton, matières plastiques ou supports similaires) d'une épaisseur n'excédant pas 0,2 mm (support non compris)", il est important d'avoir le bon code SH ou code TARIC. Le code HS 7607000000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.

Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Feuilles et bandes minces en aluminium (même imprimées ou fixées sur papier, carton, matières plastiques ou supports similaires) d'une épaisseur n'excédant pas 0,2 mm (support non compris)", veuillez noter les points suivants :

  1. Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Feuilles et bandes minces en aluminium (même imprimées ou fixées sur papier, carton, matières plastiques ou supports similaires) d'une épaisseur n'excédant pas 0,2 mm (support non compris)".
  2. Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Feuilles et bandes minces en aluminium (même imprimées ou fixées sur papier, carton, matières plastiques ou supports similaires) d'une épaisseur n'excédant pas 0,2 mm (support non compris)" dans le pays de destination ou l'exporter depuis le pays d'origine.
  3. Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
  4. Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
  5. Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.

En résumé, le code HS-Code ou le code TARIC pour "Feuilles et bandes minces en aluminium (même imprimées ou fixées sur papier, carton, matières plastiques ou supports similaires) d'une épaisseur n'excédant pas 0,2 mm (support non compris)" est 7607000000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Feuilles et bandes minces en aluminium (même imprimées ou fixées sur papier, carton, matières plastiques ou supports similaires) d'une épaisseur n'excédant pas 0,2 mm (support non compris)".

Structure du HS-Code

76
Chapitre
07
Titre
00
Sous-titre
00
CN sous-titre
00
TARIC sous-titre
80
Codes TARIC supplémentaires

1. Chapitre

Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 76 a été sélectionné pour aluminium et ouvrages en aluminium

2. Titre

Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 07 se réfère à Feuilles et bandes minces en aluminium (même imprimées ou fixées sur papier, carton, matières plastiques ou supports similaires) d'une épaisseur n'excédant pas 0,2 mm (support non compris).

Arborescence HS-Code

7600000000 80

Chapitre ALUMINIUM ET OUVRAGES EN ALUMINIUM

7607000000 80

Feuilles et bandes minces en aluminium (même imprimées ou fixées sur papier, carton, matières plastiques ou supports similaires) d'une épaisseur n'excédant pas 0,2 mm (support non compris)

7607110000 10

- sans support

7607110000 80

- - simplement laminées

7607111100 10

- - - d'une épaisseur inférieure à 0,021 mm

7607111100 80

- - - - en rouleaux d'un poids n'excédant pas 10 kg

7607111111 10

- - - - - d’une épaisseur égale ou supérieure à 0,007 mm mais inférieure à 0,021 mm

7607111111 80

- - - - - - en provenance de Thaïlande

7607111119 80

- - - - - - autres

7607111190 80

- - - - - autres

7607111900 80

- - - - autres

7607111910 80

- - - - - à usage domestique, d'une épaisseur de 0,008 mm ou plus mais n'excédant pas 0,018 mm, en rouleaux d'une largeur n'excédant pas 650 mm

7607111930 80

- - - - - à usage domestique, d’une épaisseur non inférieure à 0,007 mm et inférieure à 0,008 mm, même recuite

7607111940 80

- - - - - à usage domestique, d’une épaisseur non inférieure à 0,008 mm ni supérieure à 0,018 mm, présentées en rouleaux, d’une largeur supérieure à 650 mm, même recuites

7607111950 80

- - - - - à usage domestique, d’une épaisseur supérieure à 0,018 mm et inférieure à 0,021 mm, même recuites

7607111960 80

- - - - - pour d'autres usages que celui de papier aluminium à usage domestique, - d’une épaisseur non inférieure à 0,007 mm et inférieure à 0,008 mm, même recuites, - d’une épaisseur non inférieure à 0,008 mm ni supérieure à 0,018 mm, présentées en rouleaux d'une largeur supérieure à 650 mm, même recuites, ou, - d’une épaisseur supérieure à 0,018 mm et inférieure à 0,021 mm, même recuites

7607111991 10

- - - - - autres

7607111991 80

- - - - - - Feuilles et bandes minces en aluminium destinées à la transformation

7607111994 80

- - - - - - Feuilles d’aluminium à usage domestique

7607111996 80

- - - - - - autres

7607119000 80

- - - d'une épaisseur de 0,021 mm ou plus mais n'excédant pas 0,2 mm

7607119044 10

- - - - Feuilles d'aluminium en rouleaux: - d'une pureté de 99,99 % en poids, - d'une épaisseur de 0,021 mm ou plus, mais n'excédant pas 0,2 mm, - d'une largeur de 500 mm, - avec une couche d'oxydes en surface de 3 à 4 nm d'épaisseur, - et d'une texture cubique supérieure à 95 %

7607119044 20

- - - - - d’une épaisseur non inférieure à 0,021 mm ni supérieure à 0,045 mm, présentée en rouleaux d’un poids unitaire excédant 10 kg, même recuites, constituées d'au moins deux couches

7607119044 80

- - - - - - d’une épaisseur de 0,03 mm ou plus, sans couches intérieures en autres matières

7607119046 80

- - - - - - autres

7607119048 10

- - - - - d’une épaisseur non inférieure à 0,021 mm ni supérieure à 0,045 mm, présentées en rouleaux d’un poids supérieur à 10 kg, même recuites, constituées d'au moins deux couches, destinées à d'autres usages que celui de papier d'aluminium à usage domestique

7607119048 80

- - - - - - d’une épaisseur de 0,03 mm ou plus, sans couches intérieures en autres matières

7607119049 80

- - - - - - autres

7607119051 10

- - - - - autres

7607119051 80

- - - - - - d’une épaisseur de 0,03 mm ou plus mais inférieure à 0,2 mm, sans couches intérieures en autres matières, en rouleaux ou en bandes enroulées

7607119052 10

- - - - - - d’une épaisseur de 0,2 mm, en rouleaux ou en bandes enroulées, sous la forme de tôles coupées à dimension ou sous la forme de cercles

7607119052 20

- - - - - - - sans couches intérieures en autres matières

7607119052 80

- - - - - - - - en alliages, destinées à être utilisées comme panneaux de carrosserie dans l’industrie automobile

7607119053 80

- - - - - - - - autres

7607119054 80

- - - - - - - autres

7607119056 80

- - - - - - autres

7607119065 10

- - - - Feuilles d'aluminium lisses présentant les paramètres suivants: - une teneur en aluminium de 99,98 % ou plus - une épaisseur de 0,070 mm ou plus mais n'excédant pas 0,125 mm - une texture en dé du type de celles utilisées pour la gravure haute tension

7607119065 80

- - - - - sans couches intérieures en autres matières, en rouleaux ou en bandes enroulées

7607119067 80

- - - - - autres

7607119071 10

- - - - autres

7607119071 20

- - - - - d’une épaisseur non inférieure à 0,021 mm ni supérieure à 0,045 mm, présentée en rouleaux d’un poids unitaire excédant 10 kg, même recuites, constituées d'au moins deux couches

7607119071 80

- - - - - - d’une épaisseur de 0,03 mm ou plus, sans couches intérieures en autres matières

7607119072 80

- - - - - - autres

7607119073 10

- - - - - d’une épaisseur non inférieure à 0,021 mm ni supérieure à 0,045 mm, présentée en rouleaux d’un poids unitaire excédant 10 kg, même recuites, constituées d'au moins deux couches, destinées à d'autres usages que celui de papier d'aluminium à usage domestique

7607119073 80

- - - - - - d’une épaisseur de 0,03 mm ou plus, sans couches intérieures en autres matières

7607119074 80

- - - - - - autres

7607119075 10

- - - - - Bande ou feuille en alliage d’aluminium et de magnésium: - d’un alliage conforme aux normes 5182-H19 ou 5052-H19, - en rouleaux d’un diamètre extérieur d'au moins 1 250 mm mais n’excédant pas 1 350 mm, - d'une épaisseur (tolérance - 0,006 mm) de 0,15 mm, 0,16 mm, 0,18 mm ou 0,20 mm, - d'une largeur (tolérance ± 0,3 mm) de 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm ou 356 mm, - d’une tolérance de courbure n’excédant pas 0,4 mm/750 mm, - présentant une mesure de la planéité: I = ±4, - dont la résistance à la traction est supérieure à (5182-H19) 365 MPa ou (5052-H19) 320 MPa, - dont l’allongement à la rupture est supérieur à (5182-H19) 3 % ou (5052-H19) 2,5 % destinée à être utilisée dans la fabrication de lamelles de stores

7607119075 80

- - - - - - d’une épaisseur de 0,03 mm ou plus mais inférieure à 0,2 mm, sans couches intérieures en autres matières, en rouleaux ou en bandes enroulées

7607119076 10

- - - - - - d'une épaisseur de 0.2 mm

7607119076 20

- - - - - - - sans couches intérieures en autres matières

7607119076 80

- - - - - - - - destinées à être utilisées comme panneaux de carrosserie dans l’industrie automobile

7607119077 80

- - - - - - - - autres

7607119078 80

- - - - - - - autres

7607119079 80

- - - - - - autres

7607119091 10

- - - - - autres

7607119091 80

- - - - - - d’une épaisseur de 0,03 mm ou plus mais inférieure à 0,2 mm, sans couches intérieures en autres matières, en rouleaux ou en bandes enroulées

7607119092 10

- - - - - - d’une épaisseur de 0,2 mm, en rouleaux ou en bandes enroulées, sous la forme de tôles coupées à dimension ou sous la forme de cercles

7607119092 20

- - - - - - - sans couches intérieures en autres matières

7607119092 80

- - - - - - - - en alliages, destinées à être utilisées comme panneaux de carrosserie dans l’industrie automobile

7607119093 80

- - - - - - - - autres

7607119094 80

- - - - - - - autres

7607119096 80

- - - - - - autres

7607190000 80

- - autres

7607191000 80

- - - d'une épaisseur inférieure à 0,021 mm

7607191011 10

- - - - d’une épaisseur égale ou supérieure à 0,007 mm mais inférieure à 0,021 mm, simplement laminées, gaufrées, sous forme de rouleaux dont le poids n’excède pas 10 kilogrammes

7607191011 80

- - - - - en provenance de Thaïlande

7607191019 80

- - - - - autres

7607191090 80

- - - - autres

7607199000 80

- - - d'une épaisseur de 0,021 mm ou plus mais n'excédant pas 0,2 mm

7607199075 80

- - - - d’une épaisseur de 0,03 mm ou plus mais inférieure à 0,2 mm, sans couches intérieures en autres matières, en rouleaux ou en bandes enroulées

7607199084 10

- - - - d’une épaisseur de 0,2 mm, en rouleaux ou en bandes enroulées, sous la forme de tôles coupées à dimension ou sous la forme de cercles

7607199084 20

- - - - - sans couches intérieures en autres matières

7607199084 80

- - - - - - en alliages, destinées à être utilisées comme panneaux de carrosserie dans l’industrie automobile

7607199093 10

- - - - - - autres

7607199093 80

- - - - - - - Rouleaux d’aluminium alliés redressés sous tension, d’une largeur d’au moins 800 mm mais n’excédant pas 2050 mm, destinés à la production de panneaux composites en aluminium

7607199094 80

- - - - - - - autres

7607199095 80

- - - - - autres

7607199096 80

- - - - autres

7607200000 80

- sur support

7607201000 80

- - d'une épaisseur (support non compris) inférieure à 0,021 mm

7607209100 10

- - d'une épaisseur (support non compris) de 0,021 mm ou plus mais n'excédant pas 0,2 mm

7607209100 80

- - - Panneau composite en aluminium

7607209900 80

- - - autres