Nouveau Décrivez un produit, obtenez le code NC. Aussi en API et MCP pour les agents IA. Essai gratuit
Aller au contenu

Numéro tarifaire 8419000000 80 - Appareils, dispositifs ou équipements de laboratoire, même chauffés électriquement (à l'exclusion des fours et autres appareils du n$o 8514), pour le traitement de matières par des opérations impliquant un changement de température telles que le chauffage, la cuisson, la torréfaction, la distillation, la rectification, la stérilisation, la pasteurisation, l'étuvage, le séchage, l'évaporation, la vaporisation, la condensation ou le refroidissement, autres que les appareils domestiques; chauffe-eau non électriques, à chauffage instantané ou à accumulation

M’alerter par e-mail

Restrictions commerciales pour l'importation de marchandises pour 8419000000 80

Cette table contient des informations sur les restrictions commerciales pour l'importation de marchandises dans l'UE et l'UE dans les pays tiers. Le tableau contient des informations sur les les restrictions commerciales dues à des unions douanières, des préférences, des quotas tarifaires, les unions douanières, les contrôles vétérinaires, les droits de douane des pays tiers et les quotas tarifaires non préférentiels quotas.

Droits 54
2020
GSP - General arrangements 2020
01-01-2023
0 %
Préférence tarifaire 142
SG
Singapore SG
01-01-2027
0 %
Préférence tarifaire 142
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Préférence tarifaire 142
2200
Central America 2200
01-08-2013
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Suspension tarifaire de la conformité aérienne 119
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Préférence tarifaire 142
FO
Faroe Islands FO
01-01-1997
0 %
Préférence tarifaire 142
XL
Melilla XL
01-01-1999
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Préférence tarifaire 142
AD
Andorra AD
01-01-2006
0 %
Droit de l'union douanière 106
SM
San Marino SM
01-01-2006
0 %
Droit de l'union douanière 106
TR
Türkiye TR
01-01-2006
0 %
Droit de l'union douanière 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Préférence tarifaire 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Préférence tarifaire 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Préférence tarifaire 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Préférence tarifaire 142
EC
Ecuador EC
01-01-2017
0 %
Préférence tarifaire 142
GB
United Kingdom GB
01-01-2021
0 %
Préférence tarifaire 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Préférence tarifaire 142
GH
Ghana GH
01-01-2027
0 %
Préférence tarifaire 142
CL
Chile CL
01-02-2025
0 %
Préférence tarifaire 142
TN
Tunisia TN
01-03-1998
0 %
Préférence tarifaire 142
MA
Morocco MA
01-03-2000
0 %
Préférence tarifaire 142
LB
Lebanon LB
01-04-2006
0 %
Préférence tarifaire 142
JO
Jordan JO
01-05-2002
0 %
Préférence tarifaire 142
EG
Egypt EG
01-06-2004
0 %
Préférence tarifaire 142
XC
Ceuta XC
01-07-1991
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Préférence tarifaire 142
MX
Mexico MX
01-07-2016
0 %
Préférence tarifaire 142
KE
Kenya KE
01-07-2024
0 %
Préférence tarifaire 142
US
United States US
01-07-2026
0 %
Préférence tarifaire 142
SY
Syria SY
01-08-1994
0 %
Préférence tarifaire 142
CO
Colombia CO
01-08-2013
0 %
Préférence tarifaire 142
VN
Viet Nam VN
01-08-2020
0 %
Préférence tarifaire 142
DZ
Algeria DZ
01-09-2005
0 %
Préférence tarifaire 142
GE
Georgia GE
01-09-2014
0 %
Préférence tarifaire 142
CI
Ivory Coast CI
02-12-2019
0 %
Préférence tarifaire 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Préférence tarifaire 142
CM
Cameroon CM
04-08-2014
0 %
Préférence tarifaire 142
1035
SADC EPA 1035
10-10-2016
0 %
Préférence tarifaire 142
ZA
South Africa ZA
10-10-2016
0 %
Préférence tarifaire 142
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Préférence tarifaire 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Préférence tarifaire 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Préférence tarifaire 142
IL
Israel IL
16-05-2023
0 %
Préférence tarifaire 142
SB
Solomon Islands SB
17-05-2020
0 %
Préférence tarifaire 142
CH
Switzerland CH
20-12-1972
0 %
Préférence tarifaire 142
PG
Papua New Guinea PG
20-12-2009
0 %
Préférence tarifaire 142
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Interdiction d'importation 277
FJ
Fiji FJ
28-07-2014
0 %
Préférence tarifaire 142
1033
CARIFORUM 1033
29-12-2008
0 %
Préférence tarifaire 142
WS
Samoa WS
31-12-2018
0 %
Préférence tarifaire 142
Contrôles et documents 4
RU
Russian Federation RU
19-12-2023
– 31-12-2027
Document requis
interdit sans document
Contrôle à l'importation 762
BY
Belarus BY
25-02-2025
Document requis
interdit sans document
Contrôle à l'importation 760
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 762
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 760

Explication des restrictions commerciales

Erga Omnes signifie "pour tous".

Les pays tiers sont des pays qui n'appartiennent pas à l'UE.

Le SPG signifie 'Système de préférences généralisées'.

Le SPG+ signifie 'Système de préférences généralisées Plus'.

European Economic Area (EEA) signifie tous les États membres de l'UE et l'Islande, le Liechtenstein et la Norvège.

Les PTOM sont des "Pays et territoires d'outre-mer". Ils ne sont pas membres de l'UE. Plus d'informations

'CARIFORUM est une organisation régionale d'intégration économique comprenant 15 États membres de la Communauté des Caraïbes (CARICOM) et la République dominicaine.'

'L'APE SADC signifie "Southern African Development Community - Economic Partnership Agreement" (Accord de partenariat économique).'

Droit signifie "droit de douane".

Estimer le coût d’importation pour 8419000000

  • Valeur en douane 1 000,00 €
  • Aucun droit des pays tiers n’est enregistré pour cette origine.
  • TVA à l’importation 20 % 200,00 €
  • Total 1 200,00 €

Peut être inférieur sous conditions :

  • Airworthiness tariff suspension: 0 %

Simple estimation. La valeur en douane est le prix incluant le transport et l’assurance jusqu’à la frontière de l’UE. Les accises, autres redevances et droits antidumping propres à un producteur ne sont pas inclus. Les taux préférentiels exigent une preuve d’origine valable. Groupes de pays et exclusions : TARIC, au novembre 2026.

Mesures à l’exportation pour 8419000000

Ce qui s’applique quand ces marchandises quittent l’UE : contrôles à l’exportation, autorisations (biens à double usage et autres), interdictions par destination et unité supplémentaire de la déclaration d’exportation.

Mesures 1
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Export prohibition 278
Contrôles et documents 1
IR
Iran, Islamic Republic of IR
30-09-2025
Document requis
interdit sans document
Export control 768

Historique

Taux de droit et mesures pour ce code dans le temps (versions annuelles).

Règles d’origine préférentielles pour 8419000000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chili

    EU-Algeria Association Agreement · Algérie

    EU-Egypt Association Agreement · Égypte

    EU-Jordan Association Agreement · Jordanie

    EU-Morocco Association Agreement · Maroc

    EU-Tunisia Association Agreement · Tunisie

    Machines for wood, paper pulp, paper and paperboard industries / or: Manufacture in which: the value of all the materials used does not exceed 40 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof, except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 60 per cent of the ex-works price of the product

  • EPA CARIFORUM

    Machines for wood, paper pulp and paperboard industries / or: Manufacture: – in which the value of all the materials used does not exceed 40 % of the ex-works price of the product; – where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

    Machines for wood, paper pulp and paperboard industries / or: Manufacture: in which the value of all the materials used does not exceed 40 % of the ex-works price of the product; where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU-Japan EPA · Japon

    CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Korea FTA · Corée du Sud

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Lebanon Association Agreement · Liban

    Machines for wood, paper pulp, paper and paperboard industries / or: Manufacture in which: the value of all the materials used does not exceed 40 % of the ex-works price of the product, within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU-Mexico Global Agreement · Mexique

    Machines for wood, paper pulp and paperboard industries / or: Manufacture: in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Machines for wood, paper pulp and paperboard industries / or: Manufacture: in which the value of all the materials used does not exceed 40% of the ex-works price of the product; where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product

  • EU-Singapore FTA · Singapour

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product

  • EU-Viet Nam FTA · Viêt Nam

    machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric; / or: Manufacture from materials of any subheading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 8419000000

8419 20 00 Notes explicatives de la nomenclature combinée: Stérilisateurs médico-chirurgicaux ou de laboratoires

Les appareils relevant de cette sous-position, destinés à l'équipement des cliniques, salles d'opérations, cabinets médicaux, etc., consistent en récipients dans lesquels les outils et instruments médico-chirurgicaux ainsi que les ouates, cotons hydrophiles et autres pansements sont soumis à une température de 100 degrés Celsius ou plus en vue de détruire les germes qu'ils pourraient porter. Le plus souvent, ils affectent la forme d'un parallélépipède ou d'un cylindre couché sur un socle et à l'intérieur duquel se trouvent des claies amovibles. Généralement, l'enveloppe est en acier ou en aluminium et garnie intérieurement de matières calorifuges. La porte peut être vitrée pour permettre de voir les instruments déposés à l'intérieur. Certains appareils sont en forme d'armoires ou d'autres meubles. Dans ce cas, au stérilisateur proprement dit peut se trouver incorporé un casier pour le rangement des instruments ou autres articles à stériliser; cette particularité n'affecte pas l'appartenance à la présente sous-position. Suivant le cas, le chauffage est assuré à l'alcool, au pétrole, au gaz ou à l'électricité et, suivant la conception des appareils, la stérilisation a lieu à l'eau bouillante (bacs ou cuves), à la vapeur d'eau sous-pression (autoclaves) ou à l'air chaud sec (étuves).

8419 50 20 Notes explicatives de la nomenclature combinée: et 8419 50 80

Échangeurs de chaleur Les échangeurs de chaleur sont utilisés: 1. pour modifier la température des fluides sans en changer l'état (liquide ou gazeux), ce changement de température pouvant aller jusqu'à une stérilisation ou une pasteurisation; 2. pour vaporiser ou condenser les fluides. Relèvent de cette sous-position, par exemple: 1. les condenseurs d'azote ou d'autres gaz; 2. les dispositifs dits «réfrigérants», pour le refroidissement et la condensation des solvants, utilisés notamment dans les teintureries et les entreprises de nettoyage à sec; 3. les appareils de refroidissement, pour liquides, vapeur ou gaz, utilisés dans diverses industries (laiterie, brasserie, etc.); 4. les appareils de pasteurisation, en continu, utilisés notamment en laiterie (pasteurisateur à plaques). Sont exclus de cette sous-position, par exemple: a) les chauffe-eau des sous-positions 8419 11 00 ou 8419 19 00; b) les appareils dans lesquels: — l'échange thermique a pour résultat de faire passer un fluide liquide ou gazeux à l'état solide (séchage par pulvérisation, par exemple), — l'échange thermique, entre les deux fluides, n'a pas lieu à travers une paroi (tour de ruissellement à l'air libre, par exemple). Ces appareils relèvent généralement des sous-positions 8419 89 10 ou 8419 89 98.

8419 50 80 Notes explicatives de la nomenclature combinée: et 8419 50 80

Échangeurs de chaleur Les échangeurs de chaleur sont utilisés: 1. pour modifier la température des fluides sans en changer l'état (liquide ou gazeux), ce changement de température pouvant aller jusqu'à une stérilisation ou une pasteurisation; 2. pour vaporiser ou condenser les fluides. Relèvent de cette sous-position, par exemple: 1. les condenseurs d'azote ou d'autres gaz; 2. les dispositifs dits «réfrigérants», pour le refroidissement et la condensation des solvants, utilisés notamment dans les teintureries et les entreprises de nettoyage à sec; 3. les appareils de refroidissement, pour liquides, vapeur ou gaz, utilisés dans diverses industries (laiterie, brasserie, etc.); 4. les appareils de pasteurisation, en continu, utilisés notamment en laiterie (pasteurisateur à plaques). Sont exclus de cette sous-position, par exemple: a) les chauffe-eau des sous-positions 8419 11 00 ou 8419 19 00; b) les appareils dans lesquels: — l'échange thermique a pour résultat de faire passer un fluide liquide ou gazeux à l'état solide (séchage par pulvérisation, par exemple), — l'échange thermique, entre les deux fluides, n'a pas lieu à travers une paroi (tour de ruissellement à l'air libre, par exemple). Ces appareils relèvent généralement des sous-positions 8419 89 10 ou 8419 89 98.

8419 89 10 Notes explicatives de la nomenclature combinée: Appareils et dispositifs de refroidissement par retour d'eau, dans lesquels l'échange thermique ne s'effectue pas à travers une paroi

La présente sous-position comprend notamment les tours de refroidissement dans lesquelles l'eau est refroidie par évaporation au contact direct de l'air. L'eau chaude est pompée vers le haut de la tour puis ruisselle librement à l'intérieur de celle-ci jusqu'en bas en étant refroidie par l'air ascendant (effet de cheminée).

8419 89 98 Notes explicatives de la nomenclature combinée: autres

Relèvent de cette sous-position les appareils pour le fumage de saucissons crus, même lorsque le saucisson subit un traitement thermique pendant le fumage, avec pour conséquence la cuisson partielle ou totale du saucisson. Ils consistent en une grande chambre, chauffée par des serpentins à vapeur, à laquelle de la fumée chaude ou froide est amenée de l'extérieur par une soufflerie et qui est équipée d'une installation d'humectation et de serpentins pour le refroidissement à l'eau froide. Les saucissons crus sont introduits dans la chambre, suspendus à des supports mobiles. Sont par contre exclus de cette sous-position les meubles dits distributeurs de vaisselle servant à tenir prêt et à délivrer la vaisselle aux clients des cantines ou des restaurants self-services, même si ces appareils sont pourvus de calorifères électriques ou d'un chauffage à bain-marie pour chauffer la vaisselle (no 9403).

Notes du chapitre 84

Notes 1. Sont exclus de ce chapitre: a) les meules et articles similaires à moudre et autres articles du chapitre 68; b) les machines, appareils ou engins (pompes, par exemple) en céramique et les parties en céramique des machines, appareils ou engins en toutes matières (chapitre 69); c) la verrerie de laboratoire (no 7017); les ouvrages en verre pour usages techniques (nos 7019 ou 7020); d) les articles des nos 7321 ou 7322, ainsi que les articles similaires en autres métaux communs (chapitres 74 à 76 ou 78 à 81); e) les aspirateurs du no 8508; f) les appareils électromécaniques à usage domestique du no 8509; les appareils photographiques numériques du no 8525; g) les radiateurs pour les articles de la section XVII; h) les balais mécaniques pour emploi à la main, autres qu'à moteur (9603). 2. Sous réserve des dispositions de la note 3 de la section XVI et de la note 11 du présent chapitre, les machines et appareils susceptibles de relever à la fois des nos8401 à 8424 ou du no8486, d’une part, et des nos8425 à 8480, d’autre part, sont classés dans les nos8401 à 8424 ou dans le no8486, selon le cas. Toutefois, A) Ne relèvent pas du no8419 : a) les couveuses et éleveuses artificielles pour l'aviculture et les armoires et étuves de germination (no8436); b) les appareils mouilleurs de grains pour la minoterie (no8437); c) les diffuseurs de sucrerie (no8438); d) les machines et appareils thermiques pour le traitement des fils, tissus et ouvrages en matières textiles (no8451); e) les appareils et dispositifs conçus pour réaliser une opération mécanique, dans lesquels le changement de température, encore que nécessaire, ne joue qu'un rôle accessoire. B) Ne relèvent pas du no8422 : a) les machines à coudre pour la fermeture des emballages (no8452); b) les machines et appareils de bureau du no8472. C) Ne relèvent pas du no 8424 : a) les machines à imprimer à jet d’encre (no8443); b) les machines à découper par jet d’eau (no8456). 3. Les machines-outils travaillant par enlèvement de toutes matières susceptibles de relever du no 8456, d'une part, et des nos 8457, 8458, 8459, 8460, 8461, 8464 ou 8465, d'autre part, sont classées au no 8456. 4. Ne relèvent du no 8457 que les machines-outils pour le travail des métaux, autres que les tours (y compris les centres de tournage), qui peuvent effectuer différents types d'opérations d'usinage, soit par: a) changement automatique des outils au départ d'un magasin conformément à un programme d'usinage (centres d'usinage); b) utilisation automatique, simultanée ou séquentielle, de diverses unités d'usinage travaillant une pièce à poste fixe (machines à poste fixe); ou c) transfert automatique de la pièce à travailler devant différentes unités d'usinage (machines à stations multiples). 5. Aux fins du no 8462, une ligne de refendage pour produits plats est une ligne de production composée d’un dérouleur, un dispositif de planage, un refendeur et un enrouleur. Une ligne de découpe à longueur pour produits plats est composée d’un dérouleur, un dispositif pour aplanir et une cisaille. 6. A) On entend par «machines automatiques de traitement de l'information» au sens du no 8471 les machines aptes à: 1) enregistrer le ou les programmes de traitement et au moins les données immédiatement nécessaires pour l'exécution de ce ou de ces programmes; 2) être librement programmées conformément aux besoins de l'utilisateur; 3) exécuter des traitements arithmétiques définis par l’utilisateur; et 4) exécuter, sans intervention humaine, un programme de traitement dont elles doivent pouvoir, par décision logique, modifier l'exécution au cours du traitement. B) Les machines automatiques de traitement de l'information peuvent se présenter sous forme de systèmes comprenant un nombre variable d’unités distinctes. C) Sous réserve des dispositions des paragraphes D) et E) ci-après, est à considérer comme faisant partie d'un système de traitement automatique de l'information toute unité remplissant simultanément les conditions suivantes: 1) être du type utilisé exclusivement ou principalement dans un système automatique de traitement de l'information; 2) être connectable à l'unité centrale de traitement soit directement, soit par l'intermédiaire d'une ou de plusieurs autres unités; et 3) être apte à recevoir ou à fournir des données sous une forme – codes ou signaux – utilisable par le système. Les unités d'une machine automatique de traitement de l'information, présentées isolément, relèvent du no 8471. Toutefois, les claviers, les dispositifs d'entrée à coordonnées x, y et les unités de mémoires à disques, qui remplissent les conditions énoncées aux paragraphes C) 2) et C) 3) ci-dessus sont toujours à classer en tant qu'unités dans le no 8471. D) Le no 8471 ne couvre pas les appareils ci-après lorsqu'ils sont présentés séparément, même s'ils remplissent toutes les conditions énoncées à la note 6 C): 1) les imprimantes, les copieurs, les télécopieurs, même combinés entre eux; 2) les appareils pour l'émission, la transmission ou la réception de la voix, d’images ou d’autres données, y compris les appareils pour la communication dans un réseau filaire ou sans fil (tel qu'un réseau local ou étendu); 3) les enceintes et microphones; 4) les caméras de télévision, les appareils photographiques numériques et les caméscopes; ou 5) les moniteurs et projecteurs, n’incorporant pas d’appareil de réception de télévision. E) Les machines incorporant une machine automatique de traitement de l'information ou travaillant en liaison avec une telle machine et exerçant une fonction propre autre que le traitement de l'information, sont à classer dans la position correspondant à leur fonction ou à défaut, dans une position résiduelle. 7. Relèvent du no 8482 les billes d'acier calibrées, c'est-à-dire les billes polies dont le diamètre maximal ou minimal ne diffère pas de plus de 1 % du diamètre nominal, à condition toutefois que cette différence (tolérance) n'excède pas 0,05 millimètre. Les billes d'acier ne répondant pas à la définition ci-dessus sont classées au no 7326. 8. Sauf dispositions contraires et sous réserve des prescriptions de la note 2 ci-dessus, ainsi que de la note 3 de la section XVI, les machines à utilisations multiples sont classées à la position visant leur utilisation principale. Si une telle position n'existe pas ou lorsqu'il n'est pas possible de déterminer l'utilisation principale, les machines à utilisations multiples sont classées au no 8479. Relèvent également, en tout état de cause, du no 8479 les machines de corderie ou de câblerie (toronneuses, commetteuses, machines à câbler, par exemple) pour toutes matières. 9. Pour l'application du no 8470, l'expression «de poche» s'applique uniquement aux machines dont les dimensions n'excèdent pas 170 mm × 100 mm × 45 mm. 10. Au sens du no8485, l'expression fabrication additive (également dénommée impression 3D) désigne la formation, sur la base d’un modèle numérique, d’objets physiques par addition et dépôts successifs de couches de matière (métal, matières plastiques matières céramiques, par exemple), puis consolidation et solidification de la matière. Sous réserve des dispositions de la note 1 de la section XVI et de la note 1 du chapitre 84, les machines répondant aux spécifications du libellé du no 8485 devront être classées sous cette position, et non dans une autre position de la nomenclature. 11. A) Les notes 12 a) et 12 b) du chapitre 85 s'appliquent également aux expressions «dispositifs à semi-conducteur» et «circuits intégrés électroniques» telles qu'utilisées dans la présente note et dans le no 8486. Toutefois, aux fins de cette note et du no 8486, l'expression «dispositifs à semi-conducteur» couvre également les dispositifs photosensibles à semi-conducteur et les diodes émettrices de lumière (LED). B) Pour l’application de cette note et du no 8486, l'expression «fabrication de dispositifs d'affichage à écran plat» couvre la fabrication des substrats utilisés dans de tels dispositifs. Elle ne couvre pas la fabrication de verre ou l’assemblage de plaquettes de circuits imprimés ou d’autres composants électroniques sur l’écran plat. Les dispositifs d’affichage à écran plat ne couvrent pas la technologie à tube cathodique. C) Le no 8486 comprend également les machines et appareils des types utilisés exclusivement ou principalement pour: 1) la fabrication ou la réparation des masques et réticules; 2) l'assemblage des dispositifs à semi-conducteur ou des circuits intégrés électroniques; 3) le levage, la manutention, le chargement et le déchargement des lingots, des plaquettes ou des dispositifs semi-conducteurs, des circuits électroniques intégrés et des dispositifs d’affichage à écran plat. D) Sous réserve des dispositions de la note 1 de la section XVI et de la note 1 du chapitre 84, les machines et appareils répondant aux spécifications du libellé du no 8486 devront être classés sous cette position, et non dans une autre position de la nomenclature. Notes de sous-positions 1. Aux fins du n° 8465 20, le terme «centres d’usinage » s’applique uniquement aux machines-outils pour le travail du bois, du liège, de l’os, du caoutchouc durci, des matières plastiques dures ou matières dures similaires, qui peuvent effectuer différents types d’opérations d’usinage par changement automatique des outils au départ d’un magasin conformément à un programme d’usinage. 2. Au sens du no 8471 49, on entend par «systèmes» les machines automatiques de traitement de l'information dont les unités répondent simultanément aux conditions énoncées dans la note 6 C) du chapitre 84 et qui comportent au moins une unité centrale de traitement, une unité d'entrée (un clavier ou un scanneur, par exemple) et une unité de sortie (une console de visualisation ou une imprimante, par exemple). 3. Au sens du n° 8481 20, on entend par «valves pour transmissions oléohydrauliques ou pneumatiques » les valves qui sont utilisées spécifiquement pour la transmission d’un «fluide de moteur » dans un système hydraulique ou pneumatique où la source d’énergie est un fluide sous pression (liquide ou gaz). Ces valves peuvent être de tout type (détendeurs, régulateurs de pression, soupapes d’arrêt, par exemple). Le n° 8481 20 a la priorité sur toutes les autres sous-positions du n° 8481. 4. Le no 8482 40 s'applique uniquement aux roulements comportant des galets cylindriques d'un diamètre constant n'excédant pas 5 millimètres et dont la longueur est égale ou supérieure à trois fois le diamètre. Ces galets peuvent être arrondis à leurs extrémités. Notes complémentaires 1. Sont seuls considérés comme «moteurs pour l'aviation» des nos 8407 10 et 8409 10 les moteurs conçus pour recevoir une hélice ou un rotor. 2. La sous-position 8471 70 30 comprend également les lecteurs de CD-ROM constituant des unités de mémoire pour machines automatiques de traitement de l'information, qui consistent en des unités d'entraînement conçues pour la lecture des signaux des CD-ROM, des CD audio et des CD photo et qui sont équipés d'une prise pour écouteurs, d'une commande de réglage du volume ou d'une commande de marche/arrêt.

Notes de la section XVI

MACHINES ET APPAREILS, MATÉRIEL ÉLECTRIQUE ET LEURS PARTIES; APPAREILS D'ENREGISTREMENT OU DE REPRODUCTION DU SON, APPAREILS D'ENREGISTREMENT OU DE REPRODUCTION DES IMAGES ET DU SON EN TÉLÉVISION, ET PARTIES ET ACCESSOIRES DE CES APPAREILS Notes 1. La présente section ne comprend pas: a) les courroies transporteuses ou de transmission en matières plastiques du chapitre 39 ou en caoutchouc vulcanisé (no 4010), ou autres articles du même type que ceux utilisés dans les machines ou appareils mécaniques ou électriques ou pour d’autres usages techniques en caoutchouc vulcanisé non durci (no 4016); b) les articles à usages techniques en cuir naturel ou reconstitué (no 4205) ou en pelleteries (no 4303); c) les canettes, fusettes, tubes, bobines et supports similaires en toutes matières (chapitres 39, 40, 44, 48 ou section XV, par exemple); d) les cartes perforées pour mécaniques Jacquard ou machines similaires (chapitres 39 ou 48 ou section XV, par exemple); e) les courroies transporteuses ou de transmission en matières textiles (no 5910), ainsi que les articles pour usages techniques en matières textiles (no 5911); f) les pierres gemmes, les pierres synthétiques ou reconstituées des nos 7102 à 7104, ainsi que les ouvrages entièrement en ces matières du no 7116, à l'exception toutefois des saphirs et des diamants travaillés, non montés, pour pointes de lecture (no 8522); g) les parties et fournitures d'emploi général, au sens de la note 2 de la section XV, en métaux communs (section XV), et les articles similaires en matières plastiques (chapitre 39); h) les tiges de forage (no 7304); ij) les toiles et courroies sans fin en fils ou en bandes métalliques (section XV); k) les articles des chapitres 82 ou 83; l) les articles de la section XVII; m) les articles du chapitre 90; n) les articles d'horlogerie (chapitre 91); o) les outils interchangeables du no 8207 et les brosses constituant des éléments de machines (no 9603), ainsi que les outils interchangeables similaires qui sont à classer d'après la matière constitutive de leur partie travaillante (chapitres 40, 42, 43, 45, 59, nos 6804, 6909, par exemple); p) les articles du chapitre 95; q) les rubans encreurs pour machines à écrire et rubans encreurs similaires, même montés sur bobines ou en cartouches (régime de la matière constitutive ou no 9612 s'ils sont encrés ou autrement préparés en vue de laisser les empreintes), ainsi que les monopodes, les bipieds, les trépieds et articles similaires, du no 9620. 2. Sous réserve des dispositions de la note 1 de la présente section et de la note 1 des chapitres 84 et 85, les parties de machines (à l'exception des parties des articles des nos 8484, 8544, 8545, 8546 ou 8547) sont classées conformément aux règles ci-après: a) les parties consistant en articles compris dans l'une quelconque des positions des chapitres 84 ou 85 (à l'exception des nos 8409, 8431, 8448, 8466, 8473, 8487, 8503, 8522, 8529, 8538 et 8548) relèvent de ladite position, quelle que soit la machine à laquelle elles sont destinées; b) lorsqu'elles sont reconnaissables comme exclusivement ou principalement destinées à une machine particulière ou à plusieurs machines d'une même position (même des nos 8479 ou 8543), les parties, autres que celles visées au paragraphe précédent, sont classées dans la position afférente à cette ou à ces machines ou, selon le cas, dans les nos 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 ou 8538; toutefois, les parties destinées principalement aussi bien aux articles du no 8517 qu'à ceux des nos 8525 à 8528, sont rangées au no 8517, et les autres parties exclusivement ou principalement destinées aux articles du no 8524 sont à classer dans le no 8529. c) les autres parties relèvent des nos 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 ou 8538, selon le cas, ou, à défaut, des nos 8487 ou 8548. 3. Sauf dispositions contraires, les combinaisons de machines d'espèces différentes destinées à fonctionner ensemble et ne constituant qu'un seul corps, ainsi que les machines conçues pour assurer deux ou plusieurs fonctions différentes, alternatives ou complémentaires, sont classées suivant la fonction principale qui caractérise l'ensemble. 4. Lorsqu'une machine ou une combinaison de machines sont constituées par des éléments distincts (même séparés ou reliés entre eux par des conduites, des dispositifs de transmission, des câbles électriques ou autre aménagement) en vue d'assurer concurremment une fonction bien déterminée comprise dans l'une des positions du chapitre 84 ou du chapitre 85, l'ensemble est à classer dans la position correspondant à la fonction qu'il assure. 5. Pour l'application des notes qui précèdent, la dénomination «machines» couvre les machines, appareils, dispositifs, engins et matériels divers cités dans les positions des chapitres 84 ou 85. 6. A) Dans la nomenclature, l’expression déchets et débris électriques et électroniques désigne des assemblages électriques et électroniques et des cartes de circuits imprimés ainsi que des articles électriques ou électroniques qui: a) ont été rendus inutilisables pour leur fonction d'origine par suite de bris, découpage ou autres processus ou pour lesquels une réparation, une remise en état ou une restauration visant à rétablir leurs fonctions d'origine serait économiquement inappropriée; b) sont emballés ou expédiés de telle manière que les articles ne sont pas protégés séparément d'éventuels dégâts qui pourraient survenir durant le transport, le chargement ou le déchargement. B) Les envois contenant un mélange de déchets et débris électriques et électroniques et d’autres déchets et débris doivent être classés dans le no8549. C) La présente section ne couvre pas les déchets municipaux tels que définis dans la note 4 du chapitre 38. Notes complémentaires 1. Les outils nécessaires au montage ou à l'entretien des machines suivent le régime de celles-ci, lorsqu'ils sont présentés au dédouanement en même temps que ces machines. Le même régime est applicable aux outils interchangeables qui sont présentés en même temps que les machines dont ils constituent l'équipement normal et pour autant qu'ils soient normalement vendus avec celles-ci. 2. Le déclarant en douane est tenu de produire à l'appui de sa déclaration, si le service de la douane l'exige, un document illustré (notice, prospectus, page de catalogue, photographie, etc.) indiquant la désignation courante de la machine, ses usages et ses caractéristiques essentielles et, pour les machines présentées à l'état démonté ou non monté, un plan de montage et un inventaire du contenu des différents colis. 3. À la demande du déclarant en douane et aux conditions fixées par les autorités compétentes, les dispositions de la règle générale 2 a) pour l'interprétation de la nomenclature sont également applicables aux machines présentées par envois échelonnés.

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Règlements de classement de l’UE pour 8419000000

Règlements de la Commission qui ont classé des marchandises précises sous ce code. Ils lient les douanes de tous les États membres pour des marchandises identiques.

  • 8419 12 00 11 nov. 2014 · Règlement sur EUR-Lex
    Panneau solaire mesurant environ 2 m × 2 m, constitué de 25 tubes à vide en verre montés en parallèle et reliés entre eux au moyen d'un tuyau collecteur. Chaque tube à vide est constitué de deux tuyaux concentriques contenant un fluide caloporteur. La face interne de chaque tube est revêtue d'une couche absorbante.

    L'énergie solaire est absorbée par la couche recouvrant la face interne des tubes et convertie en énergie thermique. La chaleur est alors transmise au fluide caloporteur qui se transforme en gaz, s'élève et transmet la chaleur au tuyau collecteur (collecteur en cuivre). La chaleur est ensuite transférée du tuyau collecteur à un réservoir de stockage de l'eau au moyen d'un système de tuyauterie contenant un fluide caloporteur circulant grâce à une pompe actionnée par une commande. La pompe, la commande, le système de tuyauterie et le réservoir de stockage de l'eau ne sont pas inclus lors de la présentation en douane. Le panneau solaire est utilisé dans les systèmes de chauffe-eau solaire et il est destiné à être installé sur un toit.

    Motifs

    Le classement est déterminé par les dispositions des règles générales 1, 2 a) et 6 pour l'interprétation de la nomenclature combinée ainsi que par le libellé des codes NC 8419 et 8419 19 00 . Le panneau solaire est considéré comme présentant les caractéristiques essentielles d'un article complet ou fini (chauffe-eau) étant donné qu'il contient tous les éléments nécessaires pour générer de la chaleur. Les éléments manquants servent à transférer la chaleur et à stocker l'eau. Un classement dans la sous-position 8419 90 85 en tant que parties de chauffe-eau est dès lors exclu. Étant donné que le panneau solaire convertit l'énergie solaire en chaleur, il ne peut pas être considéré comme simple échangeur de chaleur relevant de la sous-position 8419 50 [voir également les notes explicatives du Système harmonisé (NESH) relatives à la position 8419 , partie I, point B)]. Il convient dès lors de classer ce panneau solaire sous le code NC 8419 19 00 en tant que autres chauffe-eau non électriques, à chauffage instantané ou à accumulation (voir également les NESH relatives à la position 8419 , partie I, dernier paragraphe).

    Classé à l’époque sous 8419 19 00

  • 8419 19 00 11 nov. 2014 · Règlement sur EUR-Lex
    Panneau solaire mesurant environ 2 m × 2 m, constitué de 25 tubes à vide en verre montés en parallèle et reliés entre eux au moyen d'un tuyau collecteur. Chaque tube à vide est constitué de deux tuyaux concentriques contenant un fluide caloporteur. La face interne de chaque tube est revêtue d'une couche absorbante.

    L'énergie solaire est absorbée par la couche recouvrant la face interne des tubes et convertie en énergie thermique. La chaleur est alors transmise au fluide caloporteur qui se transforme en gaz, s'élève et transmet la chaleur au tuyau collecteur (collecteur en cuivre). La chaleur est ensuite transférée du tuyau collecteur à un réservoir de stockage de l'eau au moyen d'un système de tuyauterie contenant un fluide caloporteur circulant grâce à une pompe actionnée par une commande. La pompe, la commande, le système de tuyauterie et le réservoir de stockage de l'eau ne sont pas inclus lors de la présentation en douane. Le panneau solaire est utilisé dans les systèmes de chauffe-eau solaire et il est destiné à être installé sur un toit.

    Motifs

    Le classement est déterminé par les dispositions des règles générales 1, 2 a) et 6 pour l'interprétation de la nomenclature combinée ainsi que par le libellé des codes NC 8419 et 8419 19 00 . Le panneau solaire est considéré comme présentant les caractéristiques essentielles d'un article complet ou fini (chauffe-eau) étant donné qu'il contient tous les éléments nécessaires pour générer de la chaleur. Les éléments manquants servent à transférer la chaleur et à stocker l'eau. Un classement dans la sous-position 8419 90 85 en tant que parties de chauffe-eau est dès lors exclu. Étant donné que le panneau solaire convertit l'énergie solaire en chaleur, il ne peut pas être considéré comme simple échangeur de chaleur relevant de la sous-position 8419 50 [voir également les notes explicatives du Système harmonisé (NESH) relatives à la position 8419 , partie I, point B)]. Il convient dès lors de classer ce panneau solaire sous le code NC 8419 19 00 en tant que autres chauffe-eau non électriques, à chauffage instantané ou à accumulation (voir également les NESH relatives à la position 8419 , partie I, dernier paragraphe).

  • 8419 89 98 26 avr. 2016 · Règlement sur EUR-Lex
    Appareil électrique portatif (appelé «pistolet à colle») destiné à appliquer une colle thermofusible chauffée sur le bois ainsi que d'autres matériaux. Le corps de l'appareil est en matières plastiques et est muni d'une buse interchangeable en métal commun. La buse peut être ajustée de façon à réguler le débit de la colle.

    Lorsque l'appareil est mis en marche, un tube distributeur contrôlé par thermostat est chauffé, lequel chauffe à son tour un bâton de colle rechargeable (à une température maximale de 207 °C). La colle ramollit et peut être appliquée sur les matériaux à coller. L'appareil est destiné à être utilisé principalement par les professionnels, par exemple dans le secteur de l'emballage, dans l'industrie du meuble ou pour le montage de stands. Voir photographie (*1).

    Motifs

    Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée, par la note 3 de la section XVI, ainsi que par le libellé des codes NC 8419 , 8419 89 et 8419 89 98 . Le classement dans la position 8205 en tant qu'outil à main, en métaux communs, non dénommé ni compris ailleurs est exclu car la fonction de l'appareil est reprise au chapitre 84. Le classement dans la position 8424 en tant qu'appareil mécanique à projeter, disperser ou pulvériser des matières liquides ou en poudre ou en tant que pistolet aérographe est également exclu car la colle n'est pas projetée, dispersée ni pulvérisée. Le classement dans la position 8516 en tant qu'appareil électrothermique pour usages domestiques est également exclu étant donné que l'appareil est conçu pour être utilisé par des professionnels et n'est pas du type normalement utilisé dans les ménages [voir également les notes explicatives du système harmonisé (NESH) relatives à la position 8516 , point E]. Le classement dans la position 8465 en tant que machine-outil pour le travail du bois est également exclu, car l'appareil n'est pas destiné au travail du bois. Il est en outre tenu à la main et non fixé quelque part (voir aussi les NESH relatives à la position 8465 ). L'appareil est conçu pour le traitement de matières par des opérations impliquant un changement de température par chauffage (fonction relevant de la position 8419 ), ce qui est considéré comme sa fonction principale, ainsi que pour la régulation du débit de la colle et son application (une fonction propre, non dénommée ni comprise ailleurs). Il doit dès lors être classé sous le code NC 8419 89 98 en tant qu'autre appareil, chauffé électriquement, pour le traitement de matières.

+ 1 de plus
  • 8419 89 98 26 nov. 2012 · Règlement sur EUR-Lex
    Machine tenue à la main commandée par microprocesseur (dénommée «pistolet électronique à soufflage d’air chaud»), destinée à produire des températures comprises entre 50 et 630 °C, d'une puissance de sortie maximale de 2 000 W et mesurant environ 26 × 20 × 9 cm.

    La machine comprend: — un élément de chauffage, — un ventilateur avec un moteur soufflant de l'air à trois vitesses différentes, — un écran affichant la température. La machine est utilisée par les artisans, par exemple pour le décapage de la peinture, la contraction des gaines de câbles, le thermoformage du PVC, le brasage tendre, le soudage et l'assemblage de matières plastiques, le soudage de tuyaux et baguettes en plastique et le soudage de feuilles de plastique. (*1) Voir photographie

    Motifs

    Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée, par la note 2 du chapitre 84 et par le libellé des codes NC 8419 , 8419 89 et 8419 89 98 . La machine est destinée à être utilisée par les artisans et n'est pas du type normalement utilisé dans les ménages; par conséquent, le classement dans la position 8516 comme appareil électrothermique pour usages domestiques est exclu. Cette machine correspond à la description des positions 8419 et 8467 . Conformément à la note 2 du chapitre 84, le classement dans la position 8467 comme outil à moteur électrique incorporé, pour emploi à la main, est exclu. Par conséquent, la machine doit être classée sous le code NC 8419 89 98 comme appareil ou machine pour le traitement de matières par des opérations impliquant un changement de température.

Renseignements tarifaires du Royaume-Uni pour 8419000000

Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.

  • UK 8419200000 Valable du 23 janv. 2024 au 22 janv. 2027 · Décision 600009678 sur GOV.UK

    VHP Biodecontamination units utilize VAPROX Hydrogen Peroxide Sterilant. The 35% or 59% aqueous hydrogen peroxide sterilant is produced into flash vaporized hydrogen peroxide (VHP). Under the low-temperature biodecontamination method within an enclosed area, the heated air steam carriers the vapor into the enclosed space. The air and VHP microbial are drawn out of the enclosed space and pass through a catalytic converter degrading the VHP microbial into oxygen and water vapor for a pre-programmed cycle time period throughout the enclosure. The VHP vapor is what kills the bacteria. Biological indicators and/or chemical indicators can be used to confirm that sterility parameters have been met.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - has been used to classify this product by the terms of heading 8419-Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 6 - has been used to classify the goods to subheading …

  • UK 8419200000 Valable du 22 févr. 2024 au 21 févr. 2027 · Décision 600009914 sur GOV.UK

    VHP Biodecontamination units utilize VAPROX Hydrogen Peroxide Sterilant. The 35% or 59% aqueous hydrogen peroxide sterilant is produced into flash vaporized hydrogen peroxide (VHP). Under the low-temperature biodecontamination method within an enclosed area, the heated air steam carriers the vapor into the enclosed space. The air and VHP microbial are drawn out of the enclosed space and pass through a catalytic converter degrading the VHP microbial into oxygen and water vapor for a pre-programmed cycle time period throughout the enclosure. The VHP vapor is what kills the bacteria. Biological indicators and/or chemical indicators can be used to confirm that sterility parameters have been met.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - has been used to classify this product by the terms of heading 8419-Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …

  • UK 8419200000 Valable du 29 févr. 2024 au 27 févr. 2027 · Décision 600009975 sur GOV.UK

    VHP Biodecontamination units utilize VAPROX Hydrogen Peroxide Sterilant. The 35% or 59% aqueous hydrogen peroxide sterilant is produced into flash vaporized hydrogen peroxide (VHP). Under the low-temperature biodecontamination method within an enclosed area, the heated air steam carriers the vapor into the enclosed space. The air and VHP microbial are drawn out of the enclosed space and pass through a catalytic converter degrading the VHP microbial into oxygen and water vapor for a pre-programmed cycle time period throughout the enclosure. The VHP vapor is what kills the bacteria. Biological indicators and/or chemical indicators can be used to confirm that sterility parameters have been met.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - has been used to classify this product by the terms of heading 8419-Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …

+ 17 de plus
  • UK 8419200000 Valable du 10 avr. 2024 au 9 avr. 2027 · Décision 600010232 sur GOV.UK

    VHP Biodecontamination units utilize VAPROX Hydrogen Peroxide Sterilant. The 35% or 59% aqueous hydrogen peroxide sterilant is produced into flash vaporized hydrogen peroxide (VHP). Under the low-temperature biodecontamination method within an enclosed area, the heated air steam carriers the vapor into the enclosed space. The air and VHP microbial are drawn out of the enclosed space and pass through a catalytic converter degrading the VHP microbial into oxygen and water vapor for a pre-programmed cycle time period throughout the enclosure. The VHP vapor is what kills the bacteria. Biological indicators and/or chemical indicators can be used to confirm that sterility parameters have been met

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - has been used to classify this product by the terms of heading 8419-Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …

  • UK 8419200000 Valable du 15 janv. 2025 au 14 janv. 2028 · Décision 600012156 sur GOV.UK

    A Bio-decontamination Unit utilises Vaprox Sterilant as a means of achieving dry, low temperature sterilization. The unit has a stainless steel outer shell casing is an economical bio-decontamination Unit for small to medium sized enclosures requiring an integrated solution. Bio-decontamination Unit is specifically designed for sterilization processes in laboratory, medical, and pharmaceutical environments. The unit features include a Control Display Panel which is located on the front of the Bio unit. The touch panel is a backlit thin film transistor (TFT) display equipped with graphics and analog touch membrane. The remote printer box connects to the unit via Ethernet to provide a print out of the cycle record. A separate 100-240 VAC power source is required. The unit is an integrated, small volume, hydrogen peroxide vapor generator for bio-decontamination of clean, dry, sealed enclosures such as isolators, chambers, and work cabinets), air is drawn from a dehumidified air source. The air stream is HEPA filtered and injected with VHP vapor that is distributed to the enclosure to reduce humidity to a predetermined level in the 10-60% relative humidity range. The unit uses vaporised solution of 35% hydrogen peroxide (Vaprox Hydrogen Peroxide Sterilant - VHP) and a heated air carries the vapor into the enclosed space requiring bio-decontamination to eliminate bacteria, viruses, and other microorganisms, achieving sterilization. The Hydrogen Peroxide Sterilant minimizes risk of equipment damage and is biodegradable into water vapor and oxygen. Heating Hydrogen Peroxide Sterilant is an integral component of the sterilisation process. Without reaching the appropriate temperature, hydrogen peroxide would not vaporise, and sterilisation would not occur. To minimize exposure to liquid hydrogen peroxide during handling, the unit uses specially designed disposable cartridges containing approximately 950 mL of the Hydrogen Peroxide Sterilant. The reliance on controlled temperature as part of the sterilization cycle is a defining feature of this product. Units are available for operation with 230 Volt or 120 Volt, 50/60 Hz, single-phase electrical service. The bio-decontamination cycle consists of four phases as follows: The Unit integrates processes that involve: • Dehumidification: reducing the relative humidity to prepare the enclosure for sterilisation. • Conditioning: injecting hydrogen peroxide vapor into the enclosure. • Bio-decontamination: Maintaining the required concentration of hydrogen peroxide vapor. • Aeration: Removing hydrogen peroxide vapor through catalytic converters or exhaust systems. Weight 110 lb. (50kg) without dryer cartridge (shipping weight) 80 lb. (36.3kg) without dryer cartridge (installation weight.)

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - Has been used to classify this product by the terms of heading 8419 20 - Medical, …

  • UK 8419200000 Valable du 14 avr. 2025 au 13 avr. 2028 · Décision 600012837 sur GOV.UK

    A VHP (Vaprox Hydrogen Peroxide Sterilant) Bio-decontamination Unit with a frame which is constructed of aluminium and stainless steel and Casing which is scratch and crack resistant, moulded in colour, ABS plastic. The unit is used primarily in cleanrooms, pharmaceutical manufacturing facilities, laboratories, healthcare environments, and biosafety areas where sterile conditions are critical. The Bio-decontamination Unit is designed for mobile bio decontamination of clean, dry, sealed Enclosures (e.g. rooms, facilities and equipment) by using hydrogen peroxide vapor sterilisation. The unit uses vaporised solution of 35% hydrogen peroxide (Vaprox Hydrogen Peroxide Sterilant - VHP.) The primary function of the Bio-decontamination Unit is to decontaminate enclosed spaces by eliminating microbial contaminants, ensuring sterile conditions in critical environments. It operates as a standalone sterilization unit or can be networked with multiple units for larger spaces. Equipped with a programmable control system, integrated sensors, and automated sterilant injection, it provides a validated and repeatable decontamination process. This capability is essential for pharmaceutical production, hospital infection control, and biosafety containment, where maintaining sterility is a regulatory and operational requirement. The Bio-decontamination Unit follows a multi-phase sterilization process to ensure thorough decontamination of enclosed spaces. The key processes involved are: Preparation Phase - The enclosure to be sterilized (e.g., a cleanroom, laboratory, or equipment chamber) is sealed to maintain a controlled environment. Operators select a pre-programmed decontamination cycle via the touchscreen PLC control system. The unit performs self-diagnostics to ensure system readiness. The Injection Phase: The system vaporizes Hydrogen Peroxide Sterilant (35% H₂O₂ solution) and disperses it into the enclosure. Using high-velocity airflow, the vapor is uniformly distributed to reach all surfaces. The Smart-Phase software adjusts the hydrogen peroxide concentration based on temperature, humidity, and enclosure conditions, ensuring optimized decontamination. The base unit includes 120V or 230V power cord. Electricity 120 Vac, 60 Hz, 1 Phase, 15 Amp 230 Vac, 50 Hz, 1 Phase, 7.5 Amp. Dimensions Size: (W x L x H) 21-1/5 x 39-9/10 x 38-9/10” (539 x 1014 x 988 mm.) Unit weighs approximately 141 lb (64 kg).

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - Has been used to classify this product by the terms of heading 8419 20 - Medical, …

  • UK 8419200000 Valable du 21 juil. 2025 au 20 juil. 2028 · Décision 600013377 sur GOV.UK

    A 136 litre (4.8 cubic feet) low temperature steriliser system which is equipped with two shelves. Its features include a control display panel which is located on the front of the sterilization unit, a 10.4 inch screen, and a printer for an easy to read permanent record of the sterilization cycle. The product is available in both single and double door configurations. The operating temperature is approximately 50C (122°F) and the sterilizer chamber removes the pressure and moisture before increasing the temperature from approximately 50C to approximately 60C for the sterilant to be emitted in the chamber. The process is fully automated, is compatible with a broad range of materials. There are various pre-programmed cycles that can be selected to reflect the type of instruments needed to be sterilized, each cycle has a specific time and weight parameter to determine the proper amount of hydrogen peroxide from the sterilant cup that should be administered for sterilization. Dimensions are: cabinet: 838 x 1908 x 973 mm, chamber size: 432 x 381 x 826 mm, chamber volume: 136 litres.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …

  • UK 8419200000 Valable du 8 août 2025 au 7 août 2028 · Décision 600013450 sur GOV.UK

    A Low Temperature Sterilization System units which utilize VAPROX HC Sterilant is intended for use in the terminal sterilization of properly prepared (cleaned, rinsed and dried) medical devices in Healthcare Facilities. The unit has a large, easy to use touch screen control panel that is used to initiate and monitor the validated sterilization cycles. The 59% liquid hydrogen peroxide sterilant is a multi-cycle cup that is placed in the sterilizer’s cup interface and the user then closes the sterilizer door to create a vacuum condition. Various pre-programmed cycles can be selected to reflect the type of instruments needed to be sterilized. Each cycle has a specific time period and weight parameter to determine the proper amount of hydrogen peroxide from the VAPROX HC Sterilant cup that should be administered for sterilization. The sterilizer chamber removes the pressure and moisture before increasing the temperature from approximately 50 degrees Celsius to approximately 60 degrees Celsius for the VAPROX HC Sterilant to be emitted in the chamber. Chemical indicator strips are used to confirm that the sterilant penetrated the packs that were to be sterilized. Biological indictors and Tyvek Packaging are used within the unit to confirm sterility parameters have been met.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - Has been used to classify this product by the terms of heading 8419 20 - Medical, …

  • UK 8419200000 Valable du 11 août 2025 au 10 août 2028 · Décision 600013459 sur GOV.UK

    A 60 litre (2.1 cubic feet) low temperature sterilization system. Its features include a control display panel which is located on the front of the sterilization unit, with an 8.4-inch screen, and a printer for an easy to read permanent record of the sterilization cycle. The operating temperature is approximately 50C (122°F) and the sterilizer chamber removes the pressure and moisture before increasing the temperature from approximately 50C to approximately 60C for the sterilant to be emitted in the chamber. The process is fully automated, is compatible with a broad range of materials. There are various pre-programmed cycles that can be selected to reflect the type of instruments needed to be sterilized, each cycle has a specific time and weight parameter to determine the proper amount of hydrogen peroxide from the sterilant cup that should be administered for sterilization. Overall sterilizer dimensions are - 572 x 835 x 1562 mm, chamber size - 330 x 711 x 254 mm, chamber volume - 60 litres.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …

  • UK 8419200000 Valable du 3 nov. 2025 au 2 nov. 2028 · Décision 600013737 sur GOV.UK

    The product is a Biodecontamination unit. It is a low-temperature sterilisation system that uses Hydrogen Peroxide Sterilant under vacuum conditions. The chamber can hold up to 136 litres and is 4.8ft³. The chamber has shelving present to place contaminated instruments (metal and non metal) to be sterilised. The unit has three factory programmable cycles which can be activated using the built in touchscreen display (10.4-inch colour). It is used primarily in laboratory and industrial settings for instruments and devices sensitive to heat and moisture. There are no toxic by-products created, only water vapour and oxygen are produced. Dimensions - Height 1908mm, Width 838mm, Depth 973mm.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 - Has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - Has been used to classify this product by the …

  • UK 8419390000 Valable du 13 nov. 2024 au 12 nov. 2027 · Décision 600011574 sur GOV.UK

    Automatic Air Dehydrator which is a device used primarily in the field of telecommunications with the key function being to remove moisture and keep waveguide and coax systems dry. Waveguide consists of hollow metallic tubes that guide microwave signals. Moisture can interfere with signal transmission, leading to loss of efficiency and increased attenuation. Automatic dehydrators adjust their performance based on real-time humidity data. This reduces the need for manual intervention and ensures consistent performance. Air is dehydrated by passing it through a drying canister containing the drying agent. The dried air is delivered to the communications equipment through a connection in the rear panel. The moisture is removed from the drying canisters by heat. The Ethernet communications capabilities within the dehydrator include support for the web interface, Simple Network Management Protocol (SNMP), User Datagram Protocol (UDP) and Trivial File Transfer Protocol (TFTP). It allows for monitoring and configuration of the dehydrator as well as providing a means for upgrading the dehydrator’s software in the field. The dehydrator is housed in a rack mountable, light weight metal chassis, has simple power connections and ethernet, RS-422/485, RS-232 and alarm relay outputs. A front panel with display allows for IP configuration and status monitoring with or without network connection. For shipment, the units are packaged in purpose designed protective packaging material.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 5 (b) - has been used to identify the type of …

  • UK 8419508090 Valable du 2 févr. 2026 au 1 févr. 2029 · Décision 600014789 sur GOV.UK

    Air to air heat exchanger unit, comprising, amongst other components, 3 electric fans and 2 sets of aluminium fins. Each set of fins are separated from each other with an air blocker that seals the two separate airflows from each other. Dimensions are 610mm x 355mm x 174mm. For use as a thermal management solution. Heated air is absorbed and cooled by the aluminium fins within the unit. To be configured to fit side, back or door mounting positions

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 6 has been used to classify the goods to sub-heading 8415.50 – …

  • UK 8419818090 Valable du 17 sept. 2025 au 16 sept. 2028 · Décision 600013567 sur GOV.UK

    The electric Grill Chargrill Ovens can prepare grilled products, cook pizzas, breads, thick pieces of meats and roast chickens Fat atomising technology so fat tray to clean. Hot temperature and easy to clean metal plate heat bed. High heat atomises fat so there's no fat tray to clean The water vapour that's naturally released from the fat and oils during cooking is also absorbed back into the food This is industrial Grade griller for Restaurants, pubs, cafes, bars, festivals. Product features Dimensions690(H) x 905(W) x 835(D)mm Dimensions - cooking area800 x 554mm Material Stainless Steel Weight221kg High heat - low energy consumption - faster whilst saving up to 25% on energy costs compared to some other electric grills

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (Gir)s Gir 1 has been used to classify this product by the terms of heading 8419 - machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. Gir 6 has been used to classify the goods to subheading level …

  • UK 8419818090 Valable du 10 sept. 2025 au 9 sept. 2028 · Décision 600013568 sur GOV.UK

    Industrial gas griller, made of steel and iron, for use in the commercial food industry. It has push-button piezo ignition to the individual burners, 4 brander bars which are reversible and it has a pressed drip tray and container for grease debris collection. All components are easily removable for cleaning. It can be converted between natural and propane gas types and it can be joined closely to other models in the brand. Dimensions of the griller are 550mm (H) x 400mm (W) x 900mm (D) and weighs 55kg.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …

  • UK 8419818090 Valable du 10 sept. 2025 au 9 sept. 2028 · Décision 600013593 sur GOV.UK

    A stainless steel and enamelled cast iron electric crêpe maker for the commercial industry. It has 3kW power with a thermostat controlled temperature up to 320°C and it is also suitable for the cooking of chapatti or blinis. Its dimensions are 160mm (H) x 400mm (Ø) and weighs 14kg.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. GIR 6 - has been used to classify the goods to subheading …

  • UK 8419899800 Valable du 24 avr. 2024 au 23 avr. 2027 · Décision 600010048 sur GOV.UK

    This product is a kit designed for setting off smoke and heat detectors. The kit contains 1 heat unit, battery batons, fast charger, removal tool, protective carrying bag and extension poles (height of 9 metres). The head unit incorporates a smoke capsule, pcbs, a stepper motor, a smoke generator (miniature heat exchanger) assembly and a heat testing assembly. The head unit is designed to be placed over a smoke/heat detector to check if it is working by setting it off by generating synthetic smoke or heat which is blown out through ducts in the unit in the direction of the detector by means of a fan. The extension poles are designed to be attached to the head unit to reach high up detectors. Product is packaged in a single carton.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8419 Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 3b has been used as the Heat unit is considered to be the …

  • UK 8419899800 Valable du 24 avr. 2024 au 23 avr. 2027 · Décision 600010049 sur GOV.UK

    This product is a kit that is designed to test smoke and heat detectors to a height of 6 meters. The kit consists of: 1 Test kit 1 Removal tool 1 Storage bag 1 telescopic pole The kit is packaged in a single cardboard carton.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8419 Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 3b has been used as the Heat unit is considered to be the …

  • UK 8419899800 Valable du 24 avr. 2024 au 23 avr. 2027 · Décision 600010050 sur GOV.UK

    This product is a device which generates heat, smoke and carbon monoxide for the purpose of testing the correct function and operation of heat, smoke and carbon monoxide detectors. It is powered by a rechargeable battery and a charger is supplied. The product is then placed over the device under test and then produces smoke, carbon monoxide and/or hot air which is blown into its sensor in order to trigger the alarm, indicating to the user that it is working correctly. Extension poles are supplied which can be attached to the unit allowing the user to carry out the tests on units at height without the need for a ladder. Included in this set is a: Test kit Removal tool Storage bag Telescopic pole x 3 Extension poles. All equipment supplied with a storage bag and packaged in a single cardboard carton.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8419 Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 3b has been used as the Heat unit is considered to be the …

  • UK 8419899800 Valable du 27 juil. 2026 au 26 juil. 2029 · Décision 600015886 sur GOV.UK

    A rubber mat used on waxing tables for heating up tins of wax, the contents of which are be applied to outdoor clothing such as jackets. Outer material of the product is silicone rubber, inside is a resistive heating element reinforced with glass textile. When power is applied the resistive heating element heats up the mat to make the wax useable for application to the clothing. The mat can operate at temperatures of up to 200 degrees Celsius continuously or 230 Celsius for short intervals

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8419 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 6 has been used to classify the goods to sub-heading 8419.89 – …

  • UK 8419908590 Valable du 20 mai 2024 au 19 mai 2027 · Décision 600010499 sur GOV.UK

    Parts that are made from Brass, Copper Nickel and Aluminium Bronze for specific use in Heat Exchangers. The plates are cut to size and machined and drilled as per the customer's requirements. Each plate differs in the material, dimensions, machining and drilling patterns. Items are bespoke to customers requirements (Purchase Orders/ Technical Drawings) with specific end use only for Heat Exchangers.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 8419 - for machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric GIR 6 has been used to classify the goods to subheading level 841990 - Parts 8 Digit Code …

Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.

Restrictions et signalements pour 8419000000

  • Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XXI 8419

    Art. 3 decies, biens qui procurent des recettes importantes à la Russie

    Lire l’acte sur EUR-Lex

À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.

TVA à l’importation dans l’UE

  • Allemagne 19 %
  • Autriche 20 %
  • Belgique 21 %
  • Bulgarie 20 %
  • Chypre 19 % éventuellement 3 %, 5 %
  • Croatie 25 %
  • Danemark 25 %
  • Espagne 21 %
  • Estonie 24 %
  • Finlande 25,5 %
  • France 20 %
  • Grèce 24 % éventuellement 13 %
  • Hongrie 27 %
  • Irlande 23 %
  • Italie 22 %
  • Lettonie 21 %
  • Lituanie 21 %
  • Luxembourg 17 %
  • Malte 18 %
  • Pays-Bas 21 %
  • Pologne 23 %
  • Portugal 23 %
  • Roumanie 21 %
  • Slovaquie 23 %
  • Slovénie 22 %
  • Suède 25 %
  • Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Les règles d’origine préférentielles de la sous-position 841900 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.

Règles d’origine sur Access2Markets

Informations

Lorsque vous importez ou exportez "Appareils, dispositifs ou équipements de laboratoire, même chauffés électriquement (à l'exclusion des fours et autres appareils du n$o 8514), pour le traitement de matières par des opérations impliquant un changement de température telles que le chauffage, la cuisson, la torréfaction, la distillation, la rectification, la stérilisation, la pasteurisation, l'étuvage, le séchage, l'évaporation, la vaporisation, la condensation ou le refroidissement, autres que les appareils domestiques; chauffe-eau non électriques, à chauffage instantané ou à accumulation", il est important d'avoir le bon code SH ou code TARIC. Le code HS 8419000000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.

Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Appareils, dispositifs ou équipements de laboratoire, même chauffés électriquement (à l'exclusion des fours et autres appareils du n$o 8514), pour le traitement de matières par des opérations impliquant un changement de température telles que le chauffage, la cuisson, la torréfaction, la distillation, la rectification, la stérilisation, la pasteurisation, l'étuvage, le séchage, l'évaporation, la vaporisation, la condensation ou le refroidissement, autres que les appareils domestiques; chauffe-eau non électriques, à chauffage instantané ou à accumulation", veuillez noter les points suivants :

  1. Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Appareils, dispositifs ou équipements de laboratoire, même chauffés électriquement (à l'exclusion des fours et autres appareils du n$o 8514), pour le traitement de matières par des opérations impliquant un changement de température telles que le chauffage, la cuisson, la torréfaction, la distillation, la rectification, la stérilisation, la pasteurisation, l'étuvage, le séchage, l'évaporation, la vaporisation, la condensation ou le refroidissement, autres que les appareils domestiques; chauffe-eau non électriques, à chauffage instantané ou à accumulation".
  2. Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Appareils, dispositifs ou équipements de laboratoire, même chauffés électriquement (à l'exclusion des fours et autres appareils du n$o 8514), pour le traitement de matières par des opérations impliquant un changement de température telles que le chauffage, la cuisson, la torréfaction, la distillation, la rectification, la stérilisation, la pasteurisation, l'étuvage, le séchage, l'évaporation, la vaporisation, la condensation ou le refroidissement, autres que les appareils domestiques; chauffe-eau non électriques, à chauffage instantané ou à accumulation" dans le pays de destination ou l'exporter depuis le pays d'origine.
  3. Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
  4. Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
  5. Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.

En résumé, le code HS-Code ou le code TARIC pour "Appareils, dispositifs ou équipements de laboratoire, même chauffés électriquement (à l'exclusion des fours et autres appareils du n$o 8514), pour le traitement de matières par des opérations impliquant un changement de température telles que le chauffage, la cuisson, la torréfaction, la distillation, la rectification, la stérilisation, la pasteurisation, l'étuvage, le séchage, l'évaporation, la vaporisation, la condensation ou le refroidissement, autres que les appareils domestiques; chauffe-eau non électriques, à chauffage instantané ou à accumulation" est 8419000000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Appareils, dispositifs ou équipements de laboratoire, même chauffés électriquement (à l'exclusion des fours et autres appareils du n$o 8514), pour le traitement de matières par des opérations impliquant un changement de température telles que le chauffage, la cuisson, la torréfaction, la distillation, la rectification, la stérilisation, la pasteurisation, l'étuvage, le séchage, l'évaporation, la vaporisation, la condensation ou le refroidissement, autres que les appareils domestiques; chauffe-eau non électriques, à chauffage instantané ou à accumulation".

Structure du HS-Code

84
Chapitre
19
Titre
00
Sous-titre
00
CN sous-titre
00
TARIC sous-titre
80
Codes TARIC supplémentaires

1. Chapitre

Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 84 a été sélectionné pour réacteurs nucléaires, chaudières, machines, appareils et engins mécaniques; parties de ces machines ou appareils

2. Titre

Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 19 se réfère à Appareils, dispositifs ou équipements de laboratoire, même chauffés électriquement (à l'exclusion des fours et autres appareils du n$o 8514), pour le traitement de matières par des opérations impliquant un changement de température telles que le chauffage, la cuisson, la torréfaction, la distillation, la rectification, la stérilisation, la pasteurisation, l'étuvage, le séchage, l'évaporation, la vaporisation, la condensation ou le refroidissement, autres que les appareils domestiques; chauffe-eau non électriques, à chauffage instantané ou à accumulation.

Arborescence HS-Code

8400000000 80

Chapitre RÉACTEURS NUCLÉAIRES, CHAUDIÈRES, MACHINES, APPAREILS ET ENGINS MÉCANIQUES; PARTIES DE CES MACHINES OU APPAREILS

8419000000 80

Appareils, dispositifs ou équipements de laboratoire, même chauffés électriquement (à l'exclusion des fours et autres appareils du n$o 8514), pour le traitement de matières par des opérations impliquant un changement de température telles que le chauffage, la cuisson, la torréfaction, la distillation, la rectification, la stérilisation, la pasteurisation, l'étuvage, le séchage, l'évaporation, la vaporisation, la condensation ou le refroidissement, autres que les appareils domestiques; chauffe-eau non électriques, à chauffage instantané ou à accumulation

8419110000 10

- Chauffe-eau non électriques, à chauffage instantané ou à accumulation

8419110000 80

- - à chauffage instantané, à gaz

8419120000 80

- - Chauffe-eau solaires

8419190000 80

- - autres

8419200000 80

- Stérilisateurs médico-chirurgicaux ou de laboratoires

8419330000 10

- Séchoirs

8419330000 80

- - Appareils de lyophilisation, appareils de cryodessiccation et séchoirs à pulvérisation

8419340000 80

- - autres, pour produits agricoles

8419350000 80

- - autres, pour le bois, la pâte à papier, le papier ou le carton

8419390000 80

- - autres

8419400000 80

- Appareils de distillation ou de rectification

8419500000 80

- Échangeurs de chaleur

8419502000 80

- - Échangeurs de chaleur fabriqués à partir de fluoropolymères dont le diamètre interne des tubes d'entrée et de sortie n'excède pas 3 cm

8419508000 80

- - autres

8419508010 80

- - - destinés à des aéronefs civils

8419508030 80

- - - Échangeur thermique en aluminium pour chaudières à gaz conçu pour le transfert de chaleur: - d’une hauteur de 100mm ou plus, mais n’excédant pas 150mm, - d’une largeur de 235mm ou plus, mais n’excédant pas 300mm, - d’une longueur de 240mm ou plus, mais n'excédant pas 300mm, - pour une puissance de sortie de 25kW ou plus, mais n’excédant pas 35kW, - d’un poids de 8Kg ou plus, mais n’excédant pas 10Kg

8419508090 80

- - - autres

8419600000 80

- Appareils et dispositifs pour la liquéfaction de l'air ou d'autres gaz

8419810000 10

- autres appareils et dispositifs

8419810000 80

- - pour la préparation de boissons chaudes ou la cuisson ou le chauffage des aliments

8419812000 80

- - - Percolateurs et autres appareils pour la préparation du café et autres boissons chaudes

8419812010 80

- - - - destinés à des aéronefs civils

8419812090 80

- - - - autres

8419818000 80

- - - autres

8419818010 80

- - - - destinés à des aéronefs civils

8419818090 80

- - - - autres

8419890000 80

- - autres

8419891000 80

- - - Appareils et dispositifs de refroidissement par retour d'eau, dans lesquels l'échange thermique ne s'effectue pas à travers une paroi

8419893000 80

- - - Appareils et dispositifs de métallisation sous vide

8419899800 80

- - - autres

8419900000 80

- Parties

8419901500 80

- - de stérilisateurs de la sous-position 8419 20 00

8419908500 80

- - autres

8419908510 80

- - - d'échangeurs de chaleur, destinées à des aéronefs civils

8419908540 80

- - - Claviers en silicone ou plastique, comprenant - des parties en métaux communs et comprenant ou non des parties en plastique, résine époxy renforcée de fibre de verre ou bois, -même imprimés ou traités en surface, -avec ou sans conducteurs électriques, -avec ou sans membrane collée sur le clavier, -avec ou sans pellicule protectrice, -mono- ou multicouche

8419908590 80

- - - autres