Nouveau Décrivez un produit, obtenez le code NC. Aussi en API et MCP pour les agents IA. Essai gratuit
Aller au contenu

Numéro tarifaire 8483000000 80 - Arbres de transmission (y compris les arbres à cames et les vilebrequins) et manivelles; paliers et coussinets; engrenages et roues de friction; broches filetées à billes ou à rouleaux; réducteurs, multiplicateurs et variateurs de vitesse, y compris les convertisseurs de couple; volants et poulies, y compris les poulies à moufles; embrayages et organes d'accouplement, y compris les joints d'articulation

M’alerter par e-mail

Restrictions commerciales pour l'importation de marchandises pour 8483000000 80

Cette table contient des informations sur les restrictions commerciales pour l'importation de marchandises dans l'UE et l'UE dans les pays tiers. Le tableau contient des informations sur les les restrictions commerciales dues à des unions douanières, des préférences, des quotas tarifaires, les unions douanières, les contrôles vétérinaires, les droits de douane des pays tiers et les quotas tarifaires non préférentiels quotas.

Droits 65
MK
North Macedonia MK
01-01-2009
0 %
Préférence tarifaire 142
BA
Bosnia and Herzegovina BA
01-01-2009
0 %
Préférence tarifaire 142
UA
Ukraine UA
01-01-2016
0 %
Préférence tarifaire 142
2020
GSP - General arrangements 2020
01-01-2023
0 %
Préférence tarifaire 142
SG
Singapore SG
01-01-2027
0 %
Préférence tarifaire 142
XS
Serbia XS
01-02-2010
0 %
Préférence tarifaire 142
PE
Peru PE
01-03-2013
0 %
Préférence tarifaire 142
AL
Albania AL
01-04-2009
0 %
Préférence tarifaire 142
XK
Kosovo XK
01-04-2016
0 %
Préférence tarifaire 142
ME
Montenegro ME
01-05-2010
0 %
Préférence tarifaire 142
NZ
New Zealand NZ
01-05-2024
0 %
Préférence tarifaire 142
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Préférence tarifaire 142
2200
Central America 2200
01-08-2013
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Suspension tarifaire de la conformité aérienne 119
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
1006
EU-Canada agreement: re-imported goods 1006
21-09-2017
0 %
Préférence tarifaire 142
CA
Canada CA
21-09-2017
0 %
Préférence tarifaire 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Préférence tarifaire 142
FO
Faroe Islands FO
01-01-1997
0 %
Préférence tarifaire 142
XL
Melilla XL
01-01-1999
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Préférence tarifaire 142
AD
Andorra AD
01-01-2006
0 %
Droit de l'union douanière 106
SM
San Marino SM
01-01-2006
0 %
Droit de l'union douanière 106
TR
Türkiye TR
01-01-2006
0 %
Droit de l'union douanière 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Préférence tarifaire 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Préférence tarifaire 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Préférence tarifaire 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Préférence tarifaire 142
EC
Ecuador EC
01-01-2017
0 %
Préférence tarifaire 142
GB
United Kingdom GB
01-01-2021
0 %
Préférence tarifaire 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Préférence tarifaire 142
GH
Ghana GH
01-01-2027
0 %
Préférence tarifaire 142
CL
Chile CL
01-02-2025
0 %
Préférence tarifaire 142
TN
Tunisia TN
01-03-1998
0 %
Préférence tarifaire 142
MA
Morocco MA
01-03-2000
0 %
Préférence tarifaire 142
LB
Lebanon LB
01-04-2006
0 %
Préférence tarifaire 142
JO
Jordan JO
01-05-2002
0 %
Préférence tarifaire 142
EG
Egypt EG
01-06-2004
0 %
Préférence tarifaire 142
XC
Ceuta XC
01-07-1991
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Préférence tarifaire 142
MX
Mexico MX
01-07-2016
0 %
Préférence tarifaire 142
KE
Kenya KE
01-07-2024
0 %
Préférence tarifaire 142
US
United States US
01-07-2026
0 %
Préférence tarifaire 142
SY
Syria SY
01-08-1994
0 %
Préférence tarifaire 142
CO
Colombia CO
01-08-2013
0 %
Préférence tarifaire 142
VN
Viet Nam VN
01-08-2020
0 %
Préférence tarifaire 142
DZ
Algeria DZ
01-09-2005
0 %
Préférence tarifaire 142
GE
Georgia GE
01-09-2014
0 %
Préférence tarifaire 142
CI
Ivory Coast CI
02-12-2019
0 %
Préférence tarifaire 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Préférence tarifaire 142
CM
Cameroon CM
04-08-2014
0 %
Préférence tarifaire 142
1035
SADC EPA 1035
10-10-2016
0 %
Préférence tarifaire 142
ZA
South Africa ZA
10-10-2016
0 %
Préférence tarifaire 142
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Préférence tarifaire 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Préférence tarifaire 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Préférence tarifaire 142
IL
Israel IL
16-05-2023
0 %
Préférence tarifaire 142
SB
Solomon Islands SB
17-05-2020
0 %
Préférence tarifaire 142
CH
Switzerland CH
20-12-1972
0 %
Préférence tarifaire 142
PG
Papua New Guinea PG
20-12-2009
0 %
Préférence tarifaire 142
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Interdiction d'importation 277
FJ
Fiji FJ
28-07-2014
0 %
Préférence tarifaire 142
1033
CARIFORUM 1033
29-12-2008
0 %
Préférence tarifaire 142
WS
Samoa WS
31-12-2018
0 %
Préférence tarifaire 142
Contrôles et documents 5
KP
North Korea (Democratic People’s Republic of Korea) KP
01-02-2018
Document requis
interdit sans document
Contrôle à l'importation des biens de luxe 728
RU
Russian Federation RU
24-04-2026
– 23-04-2031
Document requis
interdit sans document
Contrôle à l'importation 762
BY
Belarus BY
25-02-2025
Document requis
interdit sans document
Contrôle à l'importation 760
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 762
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 760

Explication des restrictions commerciales

Erga Omnes signifie "pour tous".

Les pays tiers sont des pays qui n'appartiennent pas à l'UE.

Le SPG signifie 'Système de préférences généralisées'.

Le SPG+ signifie 'Système de préférences généralisées Plus'.

European Economic Area (EEA) signifie tous les États membres de l'UE et l'Islande, le Liechtenstein et la Norvège.

Les PTOM sont des "Pays et territoires d'outre-mer". Ils ne sont pas membres de l'UE. Plus d'informations

'CARIFORUM est une organisation régionale d'intégration économique comprenant 15 États membres de la Communauté des Caraïbes (CARICOM) et la République dominicaine.'

'L'APE SADC signifie "Southern African Development Community - Economic Partnership Agreement" (Accord de partenariat économique).'

Droit signifie "droit de douane".

Estimer le coût d’importation pour 8483000000

  • Valeur en douane 1 000,00 €
  • Aucun droit des pays tiers n’est enregistré pour cette origine.
  • TVA à l’importation 20 % 200,00 €
  • Total 1 200,00 €

Peut être inférieur sous conditions :

  • Airworthiness tariff suspension: 0 %

Simple estimation. La valeur en douane est le prix incluant le transport et l’assurance jusqu’à la frontière de l’UE. Les accises, autres redevances et droits antidumping propres à un producteur ne sont pas inclus. Les taux préférentiels exigent une preuve d’origine valable. Groupes de pays et exclusions : TARIC, au novembre 2026.

Mesures à l’exportation pour 8483000000

Ce qui s’applique quand ces marchandises quittent l’UE : contrôles à l’exportation, autorisations (biens à double usage et autres), interdictions par destination et unité supplémentaire de la déclaration d’exportation.

Mesures 1
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Export prohibition 278
Contrôles et documents 6
BY
Belarus BY
01-07-2024
Document requis
interdit sans document
Export control 709
UA
Ukraine UA
25-02-2025
Document requis
interdit sans document
Export control 709
UA
Ukraine UA
25-08-2022
Document requis
interdit sans document
Export control 767
RU
Russian Federation RU
26-06-2024
Document requis
interdit sans document
Export control 709
KP
North Korea (Democratic People’s Republic of Korea) KP
28-06-2018
Document requis
interdit sans document
Export control on luxury goods 718
IR
Iran, Islamic Republic of IR
30-09-2025
Document requis
interdit sans document
Export control 781

Historique

Taux de droit et mesures pour ce code dans le temps (versions annuelles).

Règles d’origine préférentielles pour 8483000000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chili

    EU-Algeria Association Agreement · Algérie

    EU-Egypt Association Agreement · Égypte

    EU-Jordan Association Agreement · Jordanie

    EU-Morocco Association Agreement · Maroc

    EU-Tunisia Association Agreement · Tunisie

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof, except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 60 per cent of the ex-works price of the product

  • EPA CARIFORUM

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture in which: – all the materials used are classified within a heading other than that of the product; – the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU-Japan EPA · Japon

    CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Korea FTA · Corée du Sud

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Lebanon Association Agreement · Liban

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU-Mexico Global Agreement · Mexique

    Transmission shafts (including camshafts and crankshafts) and cranks; bearing housing, and plain shaft bearings; gears and gearing; ball screws, gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints), intended for use in vehicles of Chapter 87 / or: Manufacture in which all the materials used are classified within a heading other than that of the product, except for heading No 8482 / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 40% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product

  • EU-Singapore FTA · Singapour

    Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Viet Nam FTA · Viêt Nam

    Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 8483000000

8483 50 Notes explicatives de la nomenclature combinée: Volants et poulies, y compris les poulies à moufles

Relèvent de cette sous-position les roues folles en métaux communs, conçues pour être utilisées dans les engins de terrassement à chenilles pour le guidage et le réglage de la tension de la chenille. Ces articles sont considérés comme des poulies folles. Ils ne transmettent pas directement de puissance, mais maintiennent la tension de la chenille, transmettent le mouvement rotatif et, en tant que tels, constitue un guide [voir les notes explicatives du SH relatives à la position 8483, point G) «Poulies, y compris les poulies à moufles», deuxième alinéa].

Notes du chapitre 84

Notes 1. Sont exclus de ce chapitre: a) les meules et articles similaires à moudre et autres articles du chapitre 68; b) les machines, appareils ou engins (pompes, par exemple) en céramique et les parties en céramique des machines, appareils ou engins en toutes matières (chapitre 69); c) la verrerie de laboratoire (no 7017); les ouvrages en verre pour usages techniques (nos 7019 ou 7020); d) les articles des nos 7321 ou 7322, ainsi que les articles similaires en autres métaux communs (chapitres 74 à 76 ou 78 à 81); e) les aspirateurs du no 8508; f) les appareils électromécaniques à usage domestique du no 8509; les appareils photographiques numériques du no 8525; g) les radiateurs pour les articles de la section XVII; h) les balais mécaniques pour emploi à la main, autres qu'à moteur (9603). 2. Sous réserve des dispositions de la note 3 de la section XVI et de la note 11 du présent chapitre, les machines et appareils susceptibles de relever à la fois des nos8401 à 8424 ou du no8486, d’une part, et des nos8425 à 8480, d’autre part, sont classés dans les nos8401 à 8424 ou dans le no8486, selon le cas. Toutefois, A) Ne relèvent pas du no8419 : a) les couveuses et éleveuses artificielles pour l'aviculture et les armoires et étuves de germination (no8436); b) les appareils mouilleurs de grains pour la minoterie (no8437); c) les diffuseurs de sucrerie (no8438); d) les machines et appareils thermiques pour le traitement des fils, tissus et ouvrages en matières textiles (no8451); e) les appareils et dispositifs conçus pour réaliser une opération mécanique, dans lesquels le changement de température, encore que nécessaire, ne joue qu'un rôle accessoire. B) Ne relèvent pas du no8422 : a) les machines à coudre pour la fermeture des emballages (no8452); b) les machines et appareils de bureau du no8472. C) Ne relèvent pas du no 8424 : a) les machines à imprimer à jet d’encre (no8443); b) les machines à découper par jet d’eau (no8456). 3. Les machines-outils travaillant par enlèvement de toutes matières susceptibles de relever du no 8456, d'une part, et des nos 8457, 8458, 8459, 8460, 8461, 8464 ou 8465, d'autre part, sont classées au no 8456. 4. Ne relèvent du no 8457 que les machines-outils pour le travail des métaux, autres que les tours (y compris les centres de tournage), qui peuvent effectuer différents types d'opérations d'usinage, soit par: a) changement automatique des outils au départ d'un magasin conformément à un programme d'usinage (centres d'usinage); b) utilisation automatique, simultanée ou séquentielle, de diverses unités d'usinage travaillant une pièce à poste fixe (machines à poste fixe); ou c) transfert automatique de la pièce à travailler devant différentes unités d'usinage (machines à stations multiples). 5. Aux fins du no 8462, une ligne de refendage pour produits plats est une ligne de production composée d’un dérouleur, un dispositif de planage, un refendeur et un enrouleur. Une ligne de découpe à longueur pour produits plats est composée d’un dérouleur, un dispositif pour aplanir et une cisaille. 6. A) On entend par «machines automatiques de traitement de l'information» au sens du no 8471 les machines aptes à: 1) enregistrer le ou les programmes de traitement et au moins les données immédiatement nécessaires pour l'exécution de ce ou de ces programmes; 2) être librement programmées conformément aux besoins de l'utilisateur; 3) exécuter des traitements arithmétiques définis par l’utilisateur; et 4) exécuter, sans intervention humaine, un programme de traitement dont elles doivent pouvoir, par décision logique, modifier l'exécution au cours du traitement. B) Les machines automatiques de traitement de l'information peuvent se présenter sous forme de systèmes comprenant un nombre variable d’unités distinctes. C) Sous réserve des dispositions des paragraphes D) et E) ci-après, est à considérer comme faisant partie d'un système de traitement automatique de l'information toute unité remplissant simultanément les conditions suivantes: 1) être du type utilisé exclusivement ou principalement dans un système automatique de traitement de l'information; 2) être connectable à l'unité centrale de traitement soit directement, soit par l'intermédiaire d'une ou de plusieurs autres unités; et 3) être apte à recevoir ou à fournir des données sous une forme – codes ou signaux – utilisable par le système. Les unités d'une machine automatique de traitement de l'information, présentées isolément, relèvent du no 8471. Toutefois, les claviers, les dispositifs d'entrée à coordonnées x, y et les unités de mémoires à disques, qui remplissent les conditions énoncées aux paragraphes C) 2) et C) 3) ci-dessus sont toujours à classer en tant qu'unités dans le no 8471. D) Le no 8471 ne couvre pas les appareils ci-après lorsqu'ils sont présentés séparément, même s'ils remplissent toutes les conditions énoncées à la note 6 C): 1) les imprimantes, les copieurs, les télécopieurs, même combinés entre eux; 2) les appareils pour l'émission, la transmission ou la réception de la voix, d’images ou d’autres données, y compris les appareils pour la communication dans un réseau filaire ou sans fil (tel qu'un réseau local ou étendu); 3) les enceintes et microphones; 4) les caméras de télévision, les appareils photographiques numériques et les caméscopes; ou 5) les moniteurs et projecteurs, n’incorporant pas d’appareil de réception de télévision. E) Les machines incorporant une machine automatique de traitement de l'information ou travaillant en liaison avec une telle machine et exerçant une fonction propre autre que le traitement de l'information, sont à classer dans la position correspondant à leur fonction ou à défaut, dans une position résiduelle. 7. Relèvent du no 8482 les billes d'acier calibrées, c'est-à-dire les billes polies dont le diamètre maximal ou minimal ne diffère pas de plus de 1 % du diamètre nominal, à condition toutefois que cette différence (tolérance) n'excède pas 0,05 millimètre. Les billes d'acier ne répondant pas à la définition ci-dessus sont classées au no 7326. 8. Sauf dispositions contraires et sous réserve des prescriptions de la note 2 ci-dessus, ainsi que de la note 3 de la section XVI, les machines à utilisations multiples sont classées à la position visant leur utilisation principale. Si une telle position n'existe pas ou lorsqu'il n'est pas possible de déterminer l'utilisation principale, les machines à utilisations multiples sont classées au no 8479. Relèvent également, en tout état de cause, du no 8479 les machines de corderie ou de câblerie (toronneuses, commetteuses, machines à câbler, par exemple) pour toutes matières. 9. Pour l'application du no 8470, l'expression «de poche» s'applique uniquement aux machines dont les dimensions n'excèdent pas 170 mm × 100 mm × 45 mm. 10. Au sens du no8485, l'expression fabrication additive (également dénommée impression 3D) désigne la formation, sur la base d’un modèle numérique, d’objets physiques par addition et dépôts successifs de couches de matière (métal, matières plastiques matières céramiques, par exemple), puis consolidation et solidification de la matière. Sous réserve des dispositions de la note 1 de la section XVI et de la note 1 du chapitre 84, les machines répondant aux spécifications du libellé du no 8485 devront être classées sous cette position, et non dans une autre position de la nomenclature. 11. A) Les notes 12 a) et 12 b) du chapitre 85 s'appliquent également aux expressions «dispositifs à semi-conducteur» et «circuits intégrés électroniques» telles qu'utilisées dans la présente note et dans le no 8486. Toutefois, aux fins de cette note et du no 8486, l'expression «dispositifs à semi-conducteur» couvre également les dispositifs photosensibles à semi-conducteur et les diodes émettrices de lumière (LED). B) Pour l’application de cette note et du no 8486, l'expression «fabrication de dispositifs d'affichage à écran plat» couvre la fabrication des substrats utilisés dans de tels dispositifs. Elle ne couvre pas la fabrication de verre ou l’assemblage de plaquettes de circuits imprimés ou d’autres composants électroniques sur l’écran plat. Les dispositifs d’affichage à écran plat ne couvrent pas la technologie à tube cathodique. C) Le no 8486 comprend également les machines et appareils des types utilisés exclusivement ou principalement pour: 1) la fabrication ou la réparation des masques et réticules; 2) l'assemblage des dispositifs à semi-conducteur ou des circuits intégrés électroniques; 3) le levage, la manutention, le chargement et le déchargement des lingots, des plaquettes ou des dispositifs semi-conducteurs, des circuits électroniques intégrés et des dispositifs d’affichage à écran plat. D) Sous réserve des dispositions de la note 1 de la section XVI et de la note 1 du chapitre 84, les machines et appareils répondant aux spécifications du libellé du no 8486 devront être classés sous cette position, et non dans une autre position de la nomenclature. Notes de sous-positions 1. Aux fins du n° 8465 20, le terme «centres d’usinage » s’applique uniquement aux machines-outils pour le travail du bois, du liège, de l’os, du caoutchouc durci, des matières plastiques dures ou matières dures similaires, qui peuvent effectuer différents types d’opérations d’usinage par changement automatique des outils au départ d’un magasin conformément à un programme d’usinage. 2. Au sens du no 8471 49, on entend par «systèmes» les machines automatiques de traitement de l'information dont les unités répondent simultanément aux conditions énoncées dans la note 6 C) du chapitre 84 et qui comportent au moins une unité centrale de traitement, une unité d'entrée (un clavier ou un scanneur, par exemple) et une unité de sortie (une console de visualisation ou une imprimante, par exemple). 3. Au sens du n° 8481 20, on entend par «valves pour transmissions oléohydrauliques ou pneumatiques » les valves qui sont utilisées spécifiquement pour la transmission d’un «fluide de moteur » dans un système hydraulique ou pneumatique où la source d’énergie est un fluide sous pression (liquide ou gaz). Ces valves peuvent être de tout type (détendeurs, régulateurs de pression, soupapes d’arrêt, par exemple). Le n° 8481 20 a la priorité sur toutes les autres sous-positions du n° 8481. 4. Le no 8482 40 s'applique uniquement aux roulements comportant des galets cylindriques d'un diamètre constant n'excédant pas 5 millimètres et dont la longueur est égale ou supérieure à trois fois le diamètre. Ces galets peuvent être arrondis à leurs extrémités. Notes complémentaires 1. Sont seuls considérés comme «moteurs pour l'aviation» des nos 8407 10 et 8409 10 les moteurs conçus pour recevoir une hélice ou un rotor. 2. La sous-position 8471 70 30 comprend également les lecteurs de CD-ROM constituant des unités de mémoire pour machines automatiques de traitement de l'information, qui consistent en des unités d'entraînement conçues pour la lecture des signaux des CD-ROM, des CD audio et des CD photo et qui sont équipés d'une prise pour écouteurs, d'une commande de réglage du volume ou d'une commande de marche/arrêt.

Notes de la section XVI

MACHINES ET APPAREILS, MATÉRIEL ÉLECTRIQUE ET LEURS PARTIES; APPAREILS D'ENREGISTREMENT OU DE REPRODUCTION DU SON, APPAREILS D'ENREGISTREMENT OU DE REPRODUCTION DES IMAGES ET DU SON EN TÉLÉVISION, ET PARTIES ET ACCESSOIRES DE CES APPAREILS Notes 1. La présente section ne comprend pas: a) les courroies transporteuses ou de transmission en matières plastiques du chapitre 39 ou en caoutchouc vulcanisé (no 4010), ou autres articles du même type que ceux utilisés dans les machines ou appareils mécaniques ou électriques ou pour d’autres usages techniques en caoutchouc vulcanisé non durci (no 4016); b) les articles à usages techniques en cuir naturel ou reconstitué (no 4205) ou en pelleteries (no 4303); c) les canettes, fusettes, tubes, bobines et supports similaires en toutes matières (chapitres 39, 40, 44, 48 ou section XV, par exemple); d) les cartes perforées pour mécaniques Jacquard ou machines similaires (chapitres 39 ou 48 ou section XV, par exemple); e) les courroies transporteuses ou de transmission en matières textiles (no 5910), ainsi que les articles pour usages techniques en matières textiles (no 5911); f) les pierres gemmes, les pierres synthétiques ou reconstituées des nos 7102 à 7104, ainsi que les ouvrages entièrement en ces matières du no 7116, à l'exception toutefois des saphirs et des diamants travaillés, non montés, pour pointes de lecture (no 8522); g) les parties et fournitures d'emploi général, au sens de la note 2 de la section XV, en métaux communs (section XV), et les articles similaires en matières plastiques (chapitre 39); h) les tiges de forage (no 7304); ij) les toiles et courroies sans fin en fils ou en bandes métalliques (section XV); k) les articles des chapitres 82 ou 83; l) les articles de la section XVII; m) les articles du chapitre 90; n) les articles d'horlogerie (chapitre 91); o) les outils interchangeables du no 8207 et les brosses constituant des éléments de machines (no 9603), ainsi que les outils interchangeables similaires qui sont à classer d'après la matière constitutive de leur partie travaillante (chapitres 40, 42, 43, 45, 59, nos 6804, 6909, par exemple); p) les articles du chapitre 95; q) les rubans encreurs pour machines à écrire et rubans encreurs similaires, même montés sur bobines ou en cartouches (régime de la matière constitutive ou no 9612 s'ils sont encrés ou autrement préparés en vue de laisser les empreintes), ainsi que les monopodes, les bipieds, les trépieds et articles similaires, du no 9620. 2. Sous réserve des dispositions de la note 1 de la présente section et de la note 1 des chapitres 84 et 85, les parties de machines (à l'exception des parties des articles des nos 8484, 8544, 8545, 8546 ou 8547) sont classées conformément aux règles ci-après: a) les parties consistant en articles compris dans l'une quelconque des positions des chapitres 84 ou 85 (à l'exception des nos 8409, 8431, 8448, 8466, 8473, 8487, 8503, 8522, 8529, 8538 et 8548) relèvent de ladite position, quelle que soit la machine à laquelle elles sont destinées; b) lorsqu'elles sont reconnaissables comme exclusivement ou principalement destinées à une machine particulière ou à plusieurs machines d'une même position (même des nos 8479 ou 8543), les parties, autres que celles visées au paragraphe précédent, sont classées dans la position afférente à cette ou à ces machines ou, selon le cas, dans les nos 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 ou 8538; toutefois, les parties destinées principalement aussi bien aux articles du no 8517 qu'à ceux des nos 8525 à 8528, sont rangées au no 8517, et les autres parties exclusivement ou principalement destinées aux articles du no 8524 sont à classer dans le no 8529. c) les autres parties relèvent des nos 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 ou 8538, selon le cas, ou, à défaut, des nos 8487 ou 8548. 3. Sauf dispositions contraires, les combinaisons de machines d'espèces différentes destinées à fonctionner ensemble et ne constituant qu'un seul corps, ainsi que les machines conçues pour assurer deux ou plusieurs fonctions différentes, alternatives ou complémentaires, sont classées suivant la fonction principale qui caractérise l'ensemble. 4. Lorsqu'une machine ou une combinaison de machines sont constituées par des éléments distincts (même séparés ou reliés entre eux par des conduites, des dispositifs de transmission, des câbles électriques ou autre aménagement) en vue d'assurer concurremment une fonction bien déterminée comprise dans l'une des positions du chapitre 84 ou du chapitre 85, l'ensemble est à classer dans la position correspondant à la fonction qu'il assure. 5. Pour l'application des notes qui précèdent, la dénomination «machines» couvre les machines, appareils, dispositifs, engins et matériels divers cités dans les positions des chapitres 84 ou 85. 6. A) Dans la nomenclature, l’expression déchets et débris électriques et électroniques désigne des assemblages électriques et électroniques et des cartes de circuits imprimés ainsi que des articles électriques ou électroniques qui: a) ont été rendus inutilisables pour leur fonction d'origine par suite de bris, découpage ou autres processus ou pour lesquels une réparation, une remise en état ou une restauration visant à rétablir leurs fonctions d'origine serait économiquement inappropriée; b) sont emballés ou expédiés de telle manière que les articles ne sont pas protégés séparément d'éventuels dégâts qui pourraient survenir durant le transport, le chargement ou le déchargement. B) Les envois contenant un mélange de déchets et débris électriques et électroniques et d’autres déchets et débris doivent être classés dans le no8549. C) La présente section ne couvre pas les déchets municipaux tels que définis dans la note 4 du chapitre 38. Notes complémentaires 1. Les outils nécessaires au montage ou à l'entretien des machines suivent le régime de celles-ci, lorsqu'ils sont présentés au dédouanement en même temps que ces machines. Le même régime est applicable aux outils interchangeables qui sont présentés en même temps que les machines dont ils constituent l'équipement normal et pour autant qu'ils soient normalement vendus avec celles-ci. 2. Le déclarant en douane est tenu de produire à l'appui de sa déclaration, si le service de la douane l'exige, un document illustré (notice, prospectus, page de catalogue, photographie, etc.) indiquant la désignation courante de la machine, ses usages et ses caractéristiques essentielles et, pour les machines présentées à l'état démonté ou non monté, un plan de montage et un inventaire du contenu des différents colis. 3. À la demande du déclarant en douane et aux conditions fixées par les autorités compétentes, les dispositions de la règle générale 2 a) pour l'interprétation de la nomenclature sont également applicables aux machines présentées par envois échelonnés.

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Règlements de classement de l’UE pour 8483000000

Règlements de la Commission qui ont classé des marchandises précises sous ce code. Ils lient les douanes de tous les États membres pour des marchandises identiques.

  • 8483 90 89 7 déc. 2007 · Règlement sur EUR-Lex
    Une couronne d’orientation, composée de deux anneaux concentriques en acier forgé, dont un est denté.

    Les anneaux peuvent effectuer des mouvements de rotation lorsqu’ils sont séparés par des chemins de roulement à billes en acier. L’anneau en acier pourvu de dents permet un transfert de la force du couple de rotation. Ce produit est destiné à être intégré dans un excavateur.

    Motifs

    Le classement est déterminé par les dispositions des règles générales 1 et 6 pour l’interprétation de la nomenclature combinée, la note 2 (a) relative à la section XVI et par le libellé des codes NC 8483 , 8483 90 et 8483 90 89 . La couronne d’orientation a une fonction incluse dans le chapitre 84. Elle doit donc être classée dans la position concernée et non en tant que partie d’un excavateur relevant de la position 8431 . Elle ne peut être considérée comme «engrenage» de la sous-position 8483 40 car elle est composée d'un seul anneau denté. Le mouvement de rotation (orientation), rendu possible par les dents, détermine la fonction du produit et il convient donc de classer la couronne d’orientation dans la sous-position 8483 90 89 en tant qu’autre organe élémentaire de transmission présenté séparément.

Renseignements tarifaires du Royaume-Uni pour 8483000000

Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.

  • UK 8483303860 Valable du 25 sept. 2024 au 24 sept. 2027 · Décision 600011300 sur GOV.UK

    A bearing housing, of a kind used in turbochargers. With precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560. It has oil chambers, but no bearings. The diameter is 50mm or more but not more than 250 mm, and the height is 40 mm or more, but not more than 150 mm.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8483 - Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). GIR 6 - has been used to classify the goods to subheading 848330 - Bearing housings, not incorporating ball or roller bearings; plain shaft bearings. 8-digit code 84833038 - Other than For ball or roller bearings. 10-digit …

  • UK 8483308010 Valable du 8 déc. 2023 au 7 déc. 2026 · Décision 600009219 sur GOV.UK

    A single shaft bearing that facilitates the movement between a target roller and the target roller support fitting. This single shaft bearing is a part of an upper door assembly of the thrust reverser used on the Gulfstream G650 civil aircraft. The component is made from a single piece of corrosion resistant stainless steel.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8483 -Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) GIR 6 - Has been used to classify the goods to subheading level 8483 30 - Bearing housings, not incorporating ball or roller bearings, plain shaft bearings 8 Digit code 84833080 - Plain shaft bearings 10 Digit code …

  • UK 8483308090 Valable du 9 sept. 2025 au 8 sept. 2028 · Décision 600013538 sur GOV.UK

    Plastic bushes made of thermosetting unsaturated polyester resin, polyester woven textile, and solid additives. Used for Plain bearings and bushes in machinery. They function by providing a low friction, low wear running surface between rotating or sliding metal parts. Dependent on size – small items are packed in polyethene bags and cardboard boxes. Large items are wrapped in cardboard and placed on wooden pallet or packed in wooden crates.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect - a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8483 - Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) GIR 5 (b) - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 848330 - Bearing housings, not incorporating ball or roller bearings; plain shaft bearings 8 …

+ 13 de plus
  • UK 8483308090 Valable du 30 sept. 2025 au 29 sept. 2028 · Décision 600013540 sur GOV.UK

    Bronze Parts of the bearing assembly in ship. Marine propulsion system e.g. bearing housing, retaining ring, anti-rotation block, threaded studs/fasteners. The parts are cast to rough size/shape then machined to size including any required details - holes, grooves etc. The parts are assembled, typically using threaded fasteners, to form the Plain Bearing Assembly. Packaged typically packed in wooden crates.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 8483 - Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) GIR 5(b) Has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 848330 - Bearing housings, not incorporating ball or roller bearings; plain shaft bearings 8 Digit Code 84833080 - Plain shaft bearings …

  • UK 8483308090 Valable du 30 oct. 2026 au 29 oct. 2029 · Décision 600016558 sur GOV.UK

    Steel Hardened Bushings. They are cylindrical plain bearings with integrated lubrication features, consisting of a single circumferential groove on the outer surface and a spiral lubrication groove machined into the inner bearing surface. These grooves distribute grease along the bearing interface during oscillating or rotating movement. The bushings are used to support shafts and pins in hydraulic cylinders, agricultural machinery, earthmoving equipment and industrial linkage assemblies. After initial greasing, the lubrication grooves allow extended lubrication intervals of up to 550 hours. Each bushing carries indelible lot marking for traceability. The goods are supplied individually or in bundles, wrapped in anti‑corrosion paper and packed in labelled cartons. Dimensions 40mm x 50mm x 40mm.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8483 - Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints.) GIR 5 B - Has been used to identify the type of packaging - Packed in labelled cartons. GIR 6 - Has been used to classify the goods to subheading level 8483 30 - Bearing housings, not incorporating ball or roller bearings; …

  • UK 8483405190 Valable du 17 mai 2024 au 16 mai 2027 · Décision 600010192 sur GOV.UK

    The Directing Gear is a part the Synchronous Drive used with Sonar Type 2008; An underwater telephone fitted to both surface and submarine vessels. Directing Gear (DG) is an assembly comprising: a gearbox, which mechanically couples the gearbox motor to various synchros and the main shaft. The Directing Gear used as part of an underwater telephone system for communication with other vessels. A directing gear sub-assembly for submarines. The system comprises of a number of different components, the main one being a gearbox as well as other mechanical and electrical components such as a slip ring mounting assembly, training shaft assembly, electrical power cable assembly, cover and bearing assemblies.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s: Gir 1 has been used to classify this product by the terms of heading 8483 – Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) Gir 3 (b) has been used as the gearbox is considered to be the essential character. Gir 6 has been used to classify the goods to sub-heading 848340 - Gears and gearing, other than toothed wheels, chain sprockets and other …

  • UK 8483405190 Valable du 19 sept. 2025 au 18 sept. 2028 · Décision 600013530 sur GOV.UK

    A Gearbox assembly. The assembly is made from multiple components including a torque synchro servomotor, a control transformer synchro and a set of reduction gears in a stainless steel housing. Stainless steel fixings (screws, washers etc), wiring, electrical connectors and synchro motors are also included. The product works by taking an input synchro signal and duplicating this mechanically in a second synchro motor to create a more powerful signal for driving the directing gear. The Gearbox is used to drive the directing gear for a a sonar underwater telephone, fitted to both surface and submarine. The item is comes in dedicated SPIS packaging.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8483 – Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). GIR 3b has been used as the gearbox is considered to be the essential character. GIR 5b has been used to identify the type of packaging - dedicated SPIS packaging. GIR 6 has been used to classify the goods to sub-heading …

  • UK 8483405190 Valable du 19 mars 2026 au 18 mars 2029 · Décision 600015015 sur GOV.UK

    The product is driven by a hydraulic or electric motor (not part of assembly), can be used in i forklift truck, winch drives, and a wide range of rotating machinery. Made from cast iron and steel housing and certain internal components/alloy steel case hardened internal gears and bearing/rubber seals. The parts of the gearbox are made using gear cutting machines (hobbing machines), subtractive machining processes from forgings and castings and assembled using other bought in components like rotary shaft seals and O-rings and bearings. This is a planetary gearbox, it works by multiplying torque and reducing rotational speeds - Product is rotary. Bought in various quantities and can be packaged accordingly, but they are individual items and generally palletised for shipment overseas.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8483 – Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). GIR 3b has been used as the gearbox is considered to be the essential character. GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to sub-heading 848340 - Gears and gearing, …

  • UK 8483502090 Valable du 25 août 2026 au 24 août 2029 · Décision 600015866 sur GOV.UK

    A Pulley tensioner unit This product is a fan belt pulley tensioner for use solely with the internal combustion engines of motor vehicles. It is fitted between the fan belt drive and the alternator and incorporates an adjustable cam mechanism that allows the position of the tensioner to be altered, thereby maintaining the correct tension of the fan belt. The tensioner unit is an assembly consisting of a steel bracket, bearing, bolt, washer and nut, forming a complete mechanical device for tensioning and guiding the drive belt within the engine system.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of 8483 - transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). GIR 6 - Has been used to classify the goods to subheading level 848350 flywheels and pulleys, including pulley blocks. 8-digit code 84835020 of cast iron or cast steel. 10-digit code 8483502090 other than for use in civil …

  • UK 8483502090 Valable du 20 juil. 2026 au 19 juil. 2029 · Décision 600015870 sur GOV.UK

    This item forms part of a pulley tensioner bearing system. It consists of a double row of steel balls and features a specialised fixing to attach it to the pulley mounting plate or bracket. The part is one of four components that make up a pulley tensioner unit, the others being the bracket, bolt, nut, and washer. The complete assembled product is a fan belt tensioner pulley, which is fitted to internal combustion engines in motor vehicles.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIRs): GIR 1 - Has been used to classify this product by the terms of 8483 - transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). GIR 6 - Has been used to classify the goods to subheading level 848350 flywheels and pulleys, including pulley blocks. 8-digit code 84835020 of cast iron or cast steel. 10-digit code 8483502090 other than for use in civil …

  • UK 8483502090 Valable du 7 sept. 2026 au 6 sept. 2029 · Décision 600016885 sur GOV.UK

    A Pulley tensioner unit This product is a fan belt pulley tensioner for use solely with the internal combustion engines of motor vehicles. It is fitted between the fan belt drive and the alternator and incorporates an adjustable cam mechanism that allows the position of the tensioner to be altered, thereby maintaining the correct tension of the fan belt. The tensioner unit is an assembly consisting of a steel bracket, bearing, bolt, washer and nut, forming a complete mechanical device for tensioning and guiding the drive belt within the engine system.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of 8483 - transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). GIR 6 - Has been used to classify the goods to subheading level 848350 flywheels and pulleys, including pulley blocks. 8-digit code 84835020 of cast iron or cast steel. 10-digit code 8483502090 other than for use in civil …

  • UK 8483908190 Valable du 12 juin 2024 au 11 juin 2027 · Décision 600010571 sur GOV.UK

    A slewing ring bearing consists of 2 machined or profiled rings separated by a set of rolling elements (balls or rollers, singular or plural) and as such can handle a combination of axial, radial and moment loads. The rings provide bolt holes for mounting and can also offer an integral gear for the transmission of power (for rotation). As such they combine bearing and power transmission qualities. Construction is machined carbon steel or an alloy steel.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8483 - Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) GIR 5 (b) - has been used to identify the type of packaging - Packaged in standard packaging GIR 6 - has been used to classify the goods to subheading level 848390 - Toothed wheels, chain sprockets and other …

  • UK 8483908990 Valable du 19 nov. 2024 au 18 nov. 2027 · Décision 600011791 sur GOV.UK

    A Torsional Viscous Vibration Damper which consists of an inertia ring freely supported and located by bearings inside a sealed housing. The clearance between the inertia ring and casing is filled with a measured amount of highly viscous silicone fluid. The damping is provided by the shearing effect of the fluid due to relative motion between the inner ring and outer casing. The damper casing incorporates a mounting flange which is rigidly attached to the fore end of the crankshaft of an internal combustion engine. The outer diameter of the casing may also be grooved to provide a drive for a belt or belts. The dampers are assembled on production lines and then welded, creating a sealed unit that can never be opened and the components used to produce them are purchased from many different countries, mainly China. Packaging is bespoke, dependent on the customer and damper size. Small dampers use returnable packaging owned by the customer in Europe which are mainly plastic. Larger dampers use wooden one off packaging.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8483 - Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) GIR 5 (b) - has been used to identify the type of packaging. Small dampers in returnable plastic, larger dampers in wooden one off packaging. GIR 6 has been used to classify this product to subheading level 848390 …

  • UK 8483908990 Valable du 25 août 2026 au 24 août 2029 · Décision 600015869 sur GOV.UK

    Brackets or plates as they are sometimes called, are parts which contribute to the full assembly of a pulley bearing. These parts are made from JIS SPHC steel plate. These are the plates or brackets on which the bearing is mounted and secured on to in the vehicle. They have specific holes and indentations which correspond to articles to be attached to them.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8483 for transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). GIR 6 - Has been used to classify the goods to subheading level 848390 for toothed wheels, chain sprockets and other transmission elements presented separately; parts. 8-digit code 84839089 other than of cast iron or …

  • UK 8483908990 Valable du 22 oct. 2026 au 21 oct. 2029 · Décision 600016099 sur GOV.UK

    A flexible disc pack, imported separately for incorporation into a traction-motor flexible drive coupling used on a locomotive. The disc pack consists of multiple thin sheets of non-cast stainless steel layered together. It transfers torque from the traction motor through the flexible drive coupling to the gearbox and vehicle wheels, while accommodating movement and misalignment within the coupling. No part of the disc pack is made from cast iron or cast steel.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s GIR 1 - Has been used to classify this product by the terms of heading 8483 for transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). GIR 6 - Has been used to classify the goods to subheading level 848390 for toothed wheels, chain sprockets and other transmission elements presented separately; parts. 8-digit code 84839089 other than of cast iron or …

  • UK 8483908990 Valable du 8 sept. 2026 au 7 sept. 2029 · Décision 600016732 sur GOV.UK

    Brackets or plates as they are sometimes called, are parts which contribute to the full assembly of a pulley bearing. These parts are made from JIS SPHC steel plate. These are the plates or brackets on which the bearing is mounted and secured on to in the vehicle. They have specific holes and indentations which correspond to articles to be attached to them.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8483 for transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). GIR 6 - Has been used to classify the goods to subheading level 848390 for toothed wheels, chain sprockets and other transmission elements presented separately; parts. 8-digit code 84839089 other than of cast iron or …

Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.

Restrictions et signalements pour 8483000000

  • Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XXI 8483

    Art. 3 decies, biens qui procurent des recettes importantes à la Russie

    Lire l’acte sur EUR-Lex
  • Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 8483

    Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie

    Lire l’acte sur EUR-Lex

À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.

TVA à l’importation dans l’UE

  • Allemagne 19 %
  • Autriche 20 %
  • Belgique 21 %
  • Bulgarie 20 %
  • Chypre 19 % éventuellement 3 %, 5 %
  • Croatie 25 %
  • Danemark 25 %
  • Espagne 21 %
  • Estonie 24 %
  • Finlande 25,5 %
  • France 20 %
  • Grèce 24 %
  • Hongrie 27 %
  • Irlande 23 %
  • Italie 22 %
  • Lettonie 21 %
  • Lituanie 21 %
  • Luxembourg 17 %
  • Malte 18 %
  • Pays-Bas 21 %
  • Pologne 23 %
  • Portugal 23 %
  • Roumanie 21 %
  • Slovaquie 23 %
  • Slovénie 22 %
  • Suède 25 %
  • Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Les règles d’origine préférentielles de la sous-position 848300 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.

Règles d’origine sur Access2Markets

Informations

Lorsque vous importez ou exportez "Arbres de transmission (y compris les arbres à cames et les vilebrequins) et manivelles; paliers et coussinets; engrenages et roues de friction; broches filetées à billes ou à rouleaux; réducteurs, multiplicateurs et variateurs de vitesse, y compris les convertisseurs de couple; volants et poulies, y compris les poulies à moufles; embrayages et organes d'accouplement, y compris les joints d'articulation", il est important d'avoir le bon code SH ou code TARIC. Le code HS 8483000000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.

Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Arbres de transmission (y compris les arbres à cames et les vilebrequins) et manivelles; paliers et coussinets; engrenages et roues de friction; broches filetées à billes ou à rouleaux; réducteurs, multiplicateurs et variateurs de vitesse, y compris les convertisseurs de couple; volants et poulies, y compris les poulies à moufles; embrayages et organes d'accouplement, y compris les joints d'articulation", veuillez noter les points suivants :

  1. Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Arbres de transmission (y compris les arbres à cames et les vilebrequins) et manivelles; paliers et coussinets; engrenages et roues de friction; broches filetées à billes ou à rouleaux; réducteurs, multiplicateurs et variateurs de vitesse, y compris les convertisseurs de couple; volants et poulies, y compris les poulies à moufles; embrayages et organes d'accouplement, y compris les joints d'articulation".
  2. Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Arbres de transmission (y compris les arbres à cames et les vilebrequins) et manivelles; paliers et coussinets; engrenages et roues de friction; broches filetées à billes ou à rouleaux; réducteurs, multiplicateurs et variateurs de vitesse, y compris les convertisseurs de couple; volants et poulies, y compris les poulies à moufles; embrayages et organes d'accouplement, y compris les joints d'articulation" dans le pays de destination ou l'exporter depuis le pays d'origine.
  3. Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
  4. Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
  5. Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.

En résumé, le code HS-Code ou le code TARIC pour "Arbres de transmission (y compris les arbres à cames et les vilebrequins) et manivelles; paliers et coussinets; engrenages et roues de friction; broches filetées à billes ou à rouleaux; réducteurs, multiplicateurs et variateurs de vitesse, y compris les convertisseurs de couple; volants et poulies, y compris les poulies à moufles; embrayages et organes d'accouplement, y compris les joints d'articulation" est 8483000000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Arbres de transmission (y compris les arbres à cames et les vilebrequins) et manivelles; paliers et coussinets; engrenages et roues de friction; broches filetées à billes ou à rouleaux; réducteurs, multiplicateurs et variateurs de vitesse, y compris les convertisseurs de couple; volants et poulies, y compris les poulies à moufles; embrayages et organes d'accouplement, y compris les joints d'articulation".

Structure du HS-Code

84
Chapitre
83
Titre
00
Sous-titre
00
CN sous-titre
00
TARIC sous-titre
80
Codes TARIC supplémentaires

1. Chapitre

Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 84 a été sélectionné pour réacteurs nucléaires, chaudières, machines, appareils et engins mécaniques; parties de ces machines ou appareils

2. Titre

Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 83 se réfère à Arbres de transmission (y compris les arbres à cames et les vilebrequins) et manivelles; paliers et coussinets; engrenages et roues de friction; broches filetées à billes ou à rouleaux; réducteurs, multiplicateurs et variateurs de vitesse, y compris les convertisseurs de couple; volants et poulies, y compris les poulies à moufles; embrayages et organes d'accouplement, y compris les joints d'articulation.

Arborescence HS-Code

8400000000 80

Chapitre RÉACTEURS NUCLÉAIRES, CHAUDIÈRES, MACHINES, APPAREILS ET ENGINS MÉCANIQUES; PARTIES DE CES MACHINES OU APPAREILS

8483000000 80

Arbres de transmission (y compris les arbres à cames et les vilebrequins) et manivelles; paliers et coussinets; engrenages et roues de friction; broches filetées à billes ou à rouleaux; réducteurs, multiplicateurs et variateurs de vitesse, y compris les convertisseurs de couple; volants et poulies, y compris les poulies à moufles; embrayages et organes d'accouplement, y compris les joints d'articulation

8483100000 80

- Arbres de transmission (y compris les arbres à cames et les vilebrequins) et manivelles

8483102100 10

- - Manivelles et vilebrequins

8483102100 80

- - - coulés ou moulés en fonte, fer ou acier

8483102110 80

- - - - destinés à des aéronefs civils

8483102190 80

- - - - autres

8483102500 80

- - - en acier forgé

8483102510 80

- - - - destinés à des aéronefs civils

8483102590 80

- - - - autres

8483102900 80

- - - autres

8483102910 80

- - - - destinés à des aéronefs civils

8483102990 80

- - - - autres

8483105000 80

- - Arbres articulés

8483105010 80

- - - destinés à des aéronefs civils

8483105090 80

- - - autres

8483109500 80

- - autres

8483109510 80

- - - destinés à des aéronefs civils

8483109530 80

- - - Arbre cannelé en alliage d'acier (arbre de torsion) avec des dents droites et un profilé en développante, présentant : -une denture extérieure dans un pas diamétral standard, -au minimum 17 dents, mais pas plus de 50 dents, -un diamètre de 35 mm ou plus, mais n'excédant pas 145 mm, -une longueur de 200 mm ou plus, mais n'excédant pas 1 345 mm, -une dureté de 35 HRC ou plus, mais n'excédant pas 45 HRC

8483109540 80

- - - Arbre étagé en acier au carbone présentant:  -des extrémités laminées, profilées en développante, cannelées, dont l'angle d'hélice est d'au moins 0°15,5' mais n'excède pas 0°21,5', -un diamètre maximal compris entre 16 mm et 18 mm, -une longueur comprise entre 137 mm et 155 mm, -un poids compris entre 0,12 kg et 0,28 kg

8483109550 80

- - - Arbre de tambour pour la transmission du couple, en acier (SM45C pour la norme de l'arbre et STS430 pour la norme de l'anneau), présentant les caractéristiques suivantes: -une longueur de 137,8 mm ou plus mais n'excédant pas 138,2 mm, -un diamètre extérieur de 23 mm ou plus mais n'excédant pas 48,025 mm, -un poids de 1,0245 kg ou plus mais n'excédant pas 1,0445 kg, -une dureté de l'arbre de 40 ou plus sur l'échelle de dureté de Rockwell C (HRC) mais n'excédant pas 50 HRC, -une dureté de l'anneau de 90 ou plus sur l'échelle de dureté de Rockwell B (HRB) mais n'excédant pas 120 HRB, -une cannelure mâle à 37 dents d'un diamètre maximal de 41 mm ou plus mais n'excédant pas 48 mm

8483109590 80

- - - autres

8483200000 80

- Paliers à roulements incorporés

8483300000 80

- Paliers, autres qu'à roulements incorporés; coussinets

8483303200 10

- - Paliers

8483303200 80

- - - pour roulements de tous genres

8483303210 80

- - - - destinés à des aéronefs civils

8483303230 80

- - - - Corps de palier du type utilisé dans les turbocompresseurs: - en fonte grise (fonderie de précision) conforme à la norme DIN EN 1561, ou en fonte ductile (fonderie de précision) conforme à la norme DIN 1560 - doté de chambres d'huile, - sans roulements, - d'un diamètre de 50 mm ou plus, mais n'excédant pas 250 mm, - d'une hauteur de 40 mm ou plus, mais n'excédant pas 150 mm, - avec ou sans chambres d'eau et raccordements

8483303290 80

- - - - autres

8483303800 80

- - - autres

8483303810 80

- - - - destinés à des aéronefs civils

8483303860 10

- - - - autres

8483303860 80

- - - - - Corps de palier du type utilisé dans les turbocompresseurs: - en fonte grise (fonderie de précision) conforme à la norme DIN EN 1561, ou en fonte ductile (fonderie de précision) conforme à la norme DIN 1560 - doté de chambres d'huile, - sans roulements, - d'un diamètre de 50 mm ou plus, mais n'excédant pas 250 mm, - d'une hauteur de 40 mm ou plus, mais n'excédant pas 150 mm, - avec ou sans chambres d'eau et raccordements

8483303899 80

- - - - - autres

8483308000 80

- - Coussinets

8483308010 80

- - - destinés à des aéronefs civils

8483308030 80

- - - Flasque de commutateur (boîtier de palier avec palier lisse) pour démarreur automobile de voitures particulières et de véhicules utilitaires -produite par moulage de précision à haute pression, -en alliage d'aluminium (EN AC-46000 ou EN AC-46000 S, selon les normes DIN EN 1706 et GB/T 16116); -avec un palier plat fritté

8483308090 80

- - - autres

8483400000 80

- Engrenages et roues de friction, autres que les roues dentées et autres organes élémentaires de transmission présentés séparément; broches filetées à billes ou à rouleaux; réducteurs, multiplicateurs et variateurs de vitesse, y compris les convertisseurs de couple

8483402100 10

- - Engrenages

8483402100 80

- - - à roues cylindriques

8483402110 80

- - - - destinés à des aéronefs civils

8483402190 80

- - - - autres

8483402300 80

- - - à roues coniques ou cylindroconiques

8483402310 80

- - - - destinés à des aéronefs civils

8483402320 80

- - - - Engrenage conique : -en alliages légers et en acier, -intégré dans des engrenages coniques à denture droite ou hélicoïdale, -d'un angle entre-axes de 30 degrés ou plus mais n'excédant pas 90 degrés, -d'un rapport d'engrenage de 1:1,3 ou plus mais n'excédant pas 1:1,46 -destiné à la fabrication de coupe-herbes, de débroussailleuses et d'autres types de machines de jardinage

8483402330 80

- - - - Engrenage conique : -en alliages légers et en acier, -intégré dans des engrenages coniques à denture droite, -d'un angle entre-axes de 24 degrés ou plus mais n'excédant pas 35 degrés, -destiné à la fabrication de coupe-herbes, de débroussailleuses et d'autres types de machines de jardinage

8483402390 80

- - - - autres

8483402500 80

- - - à vis sans fin

8483402510 80

- - - - destinés à des aéronefs civils

8483402520 80

- - - - Boîte de vitesses à vis sans fin -placée dans un boîtier en alliage d'aluminium, -pourvue de vis sans fins en matière plastique ou en acier, -percée de trous de fixation, -avec inversion du sens de la marche à 90 degrés, -avec un rapport de transmission 4/19, -équipée d'une vis-mère d’une longueur de 310 mm ou plus, mais n'excédant pas 380 mm, -d’un écrou-guide intégré au support de fixation, -avec ou sans support de vis-mère, -destinée à être attachée indirectement au moteur d'entraînement d'un système de commande de siège de voiture

8483402590 80

- - - - autres

8483402900 80

- - - autres

8483402910 80

- - - - destinés à des aéronefs civils

8483402950 10

- - - - autres

8483402950 80

- - - - - Train d’engrenage de type roue cycloïdale, aux caractéristiques suivantes: - couple nominal de 50 Nm ou plus mais n’excédant pas 9 000 Nm, - rapports standards de 1:50 ou plus mais n’excédant pas 1:475, - rattrapage n’excédant pas un arc minute, - rendement supérieur à 80 % d’un type utilisé pour les bras de robots

8483402960 80

- - - - - Train épicycloïdal, d'un type utilisé dans les outils manuels électroportatifs, avec pour caractéristiques: - un couple nominal de 25 Nm ou plus mais n'excédant pas 70 Nm; - des rapports standards de 1:12,7 ou plus mais n'excédant pas 1:65,3

8483402970 80

- - - - - Cage de planétaires en fonte d'acier, présentant : -une denture extérieure ou intérieure dans un pas diamétral standard, -27 dents ou plus, mais pas plus de 70 dents, -un diamètre de 300 mm ou plus, mais n'excédant pas 725 mm, -une longueur de 225 mm ou plus, mais n'excédant pas 800 mm, -3 ou 4 engrenages planétaires de différentiel, -une dureté de 40 HRC ou plus, mais n'excédant pas 45 HRC

8483402989 80

- - - - - autres

8483403000 80

- - Broches filetées à billes ou à rouleaux

8483403010 80

- - - destinés à des aéronefs civils

8483403090 80

- - - autres

8483405100 10

- - Réducteurs, multiplicateurs et variateurs de vitesse

8483405100 80

- - - Réducteurs, multiplicateurs et boîtes de vitesses

8483405110 80

- - - - destinés à des aéronefs civils

8483405190 80

- - - - autres

8483405900 80

- - - autres

8483405910 80

- - - - destinés à des aéronefs civils

8483405930 80

- - - - Variateur de vitesse hydrostatique: -doté d'une pompe hydraulique et d'un différentiel avec essieu, -avec ou sans ventilateur turbine et/ou poulie, destiné à la fabrication de tondeuses à gazon des sous-positions 8433 11 et 8433 19 ou d'autres tondeuses de la sous-position 8433 20

8483405990 80

- - - - autres

8483409000 80

- - autres

8483409010 80

- - - destinés à des aéronefs civils

8483409080 80

- - - Boîte de transmission comportant - au maximum 3 rapports, - un système de décélération automatique, - un système de marche arrière, destinée à la construction de produits relevant de la position 8427

8483409099 80

- - - autres

8483500000 80

- Volants et poulies, y compris les poulies à moufles

8483502000 80

- - coulés ou moulés en fonte, fer ou acier

8483502010 80

- - - destinés à des aéronefs civils

8483502090 80

- - - autres

8483508000 80

- - autres

8483508010 80

- - - destinés à des aéronefs civils

8483508020 80

- - - Poulies à moufles en acier non moulé: - constituées d'acier au carbone de construction conforme à la norme JIS G4051, - d’un diamètre extérieur de 104mm ou plus mais n’excédant pas 142mm, - d’un diamètre intérieur de 33mm ou plus mais n’excédant pas 37mm, - d’une largeur de 22mm ou plus mais n’excédant pas 40mm, - d'un poids de 0,4kg ou plus mais n'excédant pas 1,6kg, - avec 4 gorges trapézoïdales ou plus mais pas plus de 7

8483508030 80

- - - Tendeur mécanique pour maintenir la tension des courroies d'entraînement d'un moteur pour voitures particulières présentant : -deux poulies en polyamide, chacune d'un diamètre de 50 mm ou plus, mais n'excédant pas 70 mm, -un ressort en alliage d'acier contenant du chrome et du silicium, -deux bras en aluminium, -un support en aluminium, destiné à la fabrication de moteurs de véhicules automobiles

8483508040 80

- - - Volant conçu pour amortir les vibrations de torsion et les oscillations dans le système de transmission d'un véhicule avec : -un moment d'inertie total de 0,082 kg m², -un poids de 7 kg ou plus, mais n'excédant pas 8 kg, -un diamètre de 250 mm ou plus, mais n'excédant pas 280 mm, destiné à être utilisé dans la fabrication de véhicules automobiles

8483508050 80

- - - Poulie métallique simple ou double en métal filé : -en acier DC03 ou en acier non allié similaire ou en acier de décolletage, -d'un diamètre primitif de 67 mm ou plus mais n'excédant pas 145 mm, -avec trou intérieur conçu pour le montage d'un palier ou d'une clé

8483508060 80

- - - Triple poulie en métal filé : -en acier DC03 ou en acier non allié similaire ou en acier de décolletage, -d'un diamètre primitif de 60 mm ou plus, mais n'excédant pas 130 mm, -avec trou intérieur conçu pour le montage d'un palier

8483508090 80

- - - autres

8483600000 80

- Embrayages et organes d'accouplement, y compris les joints d'articulation

8483602000 80

- - coulés ou moulés en fonte, fer ou acier

8483602010 80

- - - destinés à des aéronefs civils

8483602090 80

- - - autres

8483608000 80

- - autres

8483608010 80

- - - destinés à des aéronefs civils

8483608020 80

- - - Embrayage à roue libre pour les démarreurs de voitures particulières et de véhicules utilitaires avec : -une longueur totale de 49,4 mm ou plus mais n'excédant pas 210 mm, -un pignon de démarreur à 9 dents ou plus, mais pas plus de 16 dents

8483608090 80

- - - autres

8483900000 80

- Roues dentées et autres organes élémentaires de transmission présentés séparément; parties

8483902000 80

- - Parties de paliers pour roulements de tous genres

8483902010 80

- - - destinés à des aéronefs civils

8483902090 80

- - - autres

8483908100 10

- - autres

8483908100 80

- - - coulés ou moulés en fonte, fer ou acier

8483908110 80

- - - - destinés à des aéronefs civils

8483908190 80

- - - - autres

8483908900 80

- - - autres

8483908910 80

- - - - destinés à des aéronefs civils

8483908920 80

- - - - Roue dentée de système de distribution à programme variable continu pour optimiser le remplissage des cylindres du moteur à combustion interne avec : -carter, -rotor, -au moins 4 vis, -ressort, -un diamètre externe de 80 mm ou plus mais n'excédant pas 95 mm, -une épaisseur de 25 mm ou plus, mais n'excédant pas 35 mm, utilisé dans la fabrication de moteurs de véhicules automobiles

8483908930 80

- - - - Pignons en acier forgé à denture extérieure, avec ou sans cannelures intérieures dans un pas diamétral standard, présentant : -un diamètre de 400 mm ou plus, mais n'excédant pas 630 mm, -au minimum 7 dents, mais pas plus de 15 dents, -une dureté à cœur de dent de 28 HRC ou plus, mais n'excédant pas 45 HRC, -une dureté de surface de dent de 50 HRC ou plus, mais n'excédant pas 60 HRC, -avec ou sans une dureté des cannelures de 30 HRC ou plus, mais n'excédant pas 45 HRC, -une profondeur réelle du boîtier cémenté de 4 mm ou plus, mais n'excédant pas 5 mm

8483908940 80

- - - - Roues d'engrenage en alliage d'acier avec des dents droites et un profilé en développante, présentant : -une denture externe et/ou interne dans un pas diamétral standard, -un diamètre de 35 mm ou plus mais n'excédant pas 600 mm, -au minimum 13 dents, mais pas plus de 80 dents, -une dureté à cœur de dent de 28 HRC ou plus, mais n'excédant pas 45 HRC, -une dureté de surface de dent de 50 HRC ou plus, mais n'excédant pas 65 HRC, -une profondeur réelle du boîtier cémenté de 1,00 mm ou plus, mais n'excédant pas 3,1 mm, -une dureté des cannelures de 27 HRC ou plus, mais n'excédant pas 62 HRC, -avec ou sans arbre présentant une dureté des cannelures de 27 HRC ou plus, mais n'excédant pas 62 HRC

8483908990 80

- - - - autres