Nouveau Décrivez un produit, obtenez le code NC. Aussi en API et MCP pour les agents IA. Essai gratuit
Aller au contenu

Numéro tarifaire 8536000000 80 - Appareillage pour la coupure, le sectionnement, la protection, le branchement, le raccordement ou la connexion des circuits électriques (interrupteurs, commutateurs, relais, coupe-circuit, parasurtenseurs, fiches et prises de courant, douilles pour lampes et autres connecteurs, boîtes de jonction, par exemple), pour une tension n'excédant pas 1 000 V; connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques

M’alerter par e-mail

Restrictions commerciales pour l'importation de marchandises pour 8536000000 80

Cette table contient des informations sur les restrictions commerciales pour l'importation de marchandises dans l'UE et l'UE dans les pays tiers. Le tableau contient des informations sur les les restrictions commerciales dues à des unions douanières, des préférences, des quotas tarifaires, les unions douanières, les contrôles vétérinaires, les droits de douane des pays tiers et les quotas tarifaires non préférentiels quotas.

Droits 55
2020
GSP - General arrangements 2020
01-01-2023
0 %
Préférence tarifaire 142
SG
Singapore SG
01-01-2027
0 %
Préférence tarifaire 142
5500
Mercosur 5500
01-05-2026
0 %
Préférence tarifaire 142
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Préférence tarifaire 142
2200
Central America 2200
01-08-2013
0 %
Préférence tarifaire 142
VN
Viet Nam VN
01-08-2020
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Suspension tarifaire de la conformité aérienne 119
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Préférence tarifaire 142
CH
Switzerland CH
01-01-1988
0 %
Préférence tarifaire 142
FO
Faroe Islands FO
01-01-1997
0 %
Préférence tarifaire 142
XL
Melilla XL
01-01-1999
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Préférence tarifaire 142
SM
San Marino SM
01-01-2006
0 %
Droit de l'union douanière 106
TR
Türkiye TR
01-01-2006
0 %
Droit de l'union douanière 106
AD
Andorra AD
01-01-2006
0 %
Droit de l'union douanière 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Préférence tarifaire 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Préférence tarifaire 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Préférence tarifaire 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Préférence tarifaire 142
EC
Ecuador EC
01-01-2017
0 %
Préférence tarifaire 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Préférence tarifaire 142
GB
United Kingdom GB
01-01-2021
0 %
Préférence tarifaire 142
GH
Ghana GH
01-01-2027
0 %
Préférence tarifaire 142
CL
Chile CL
01-02-2025
0 %
Préférence tarifaire 142
TN
Tunisia TN
01-03-1998
0 %
Préférence tarifaire 142
MA
Morocco MA
01-03-2000
0 %
Préférence tarifaire 142
LB
Lebanon LB
01-04-2006
0 %
Préférence tarifaire 142
JO
Jordan JO
01-05-2002
0 %
Préférence tarifaire 142
EG
Egypt EG
01-06-2004
0 %
Préférence tarifaire 142
XC
Ceuta XC
01-07-1991
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Préférence tarifaire 142
MX
Mexico MX
01-07-2016
0 %
Préférence tarifaire 142
KE
Kenya KE
01-07-2024
0 %
Préférence tarifaire 142
US
United States US
01-07-2026
0 %
Préférence tarifaire 142
SY
Syria SY
01-08-1994
0 %
Préférence tarifaire 142
CO
Colombia CO
01-08-2013
0 %
Préférence tarifaire 142
DZ
Algeria DZ
01-09-2005
0 %
Préférence tarifaire 142
GE
Georgia GE
01-09-2014
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Préférence tarifaire 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Préférence tarifaire 142
CM
Cameroon CM
04-08-2014
0 %
Préférence tarifaire 142
ZA
South Africa ZA
10-10-2016
0 %
Préférence tarifaire 142
1035
SADC EPA 1035
10-10-2016
0 %
Préférence tarifaire 142
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Préférence tarifaire 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Préférence tarifaire 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Préférence tarifaire 142
IL
Israel IL
16-05-2023
0 %
Préférence tarifaire 142
SB
Solomon Islands SB
17-05-2020
0 %
Préférence tarifaire 142
PG
Papua New Guinea PG
20-12-2009
0 %
Préférence tarifaire 142
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Interdiction d'importation 277
FJ
Fiji FJ
28-07-2014
0 %
Préférence tarifaire 142
1033
CARIFORUM 1033
29-12-2008
0 %
Préférence tarifaire 142
WS
Samoa WS
31-12-2018
0 %
Préférence tarifaire 142
Contrôles et documents 4
RU
Russian Federation RU
24-04-2026
– 23-04-2031
Document requis
interdit sans document
Contrôle à l'importation 762
BY
Belarus BY
25-02-2025
Document requis
interdit sans document
Contrôle à l'importation 760
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 762
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 760

Explication des restrictions commerciales

Erga Omnes signifie "pour tous".

Les pays tiers sont des pays qui n'appartiennent pas à l'UE.

Le SPG signifie 'Système de préférences généralisées'.

Le SPG+ signifie 'Système de préférences généralisées Plus'.

European Economic Area (EEA) signifie tous les États membres de l'UE et l'Islande, le Liechtenstein et la Norvège.

Les PTOM sont des "Pays et territoires d'outre-mer". Ils ne sont pas membres de l'UE. Plus d'informations

'CARIFORUM est une organisation régionale d'intégration économique comprenant 15 États membres de la Communauté des Caraïbes (CARICOM) et la République dominicaine.'

'L'APE SADC signifie "Southern African Development Community - Economic Partnership Agreement" (Accord de partenariat économique).'

Droit signifie "droit de douane".

Estimer le coût d’importation pour 8536000000

  • Valeur en douane 1 000,00 €
  • Aucun droit des pays tiers n’est enregistré pour cette origine.
  • TVA à l’importation 20 % 200,00 €
  • Total 1 200,00 €

Peut être inférieur sous conditions :

  • Airworthiness tariff suspension: 0 %

Simple estimation. La valeur en douane est le prix incluant le transport et l’assurance jusqu’à la frontière de l’UE. Les accises, autres redevances et droits antidumping propres à un producteur ne sont pas inclus. Les taux préférentiels exigent une preuve d’origine valable. Groupes de pays et exclusions : TARIC, au novembre 2026.

Mesures à l’exportation pour 8536000000

Ce qui s’applique quand ces marchandises quittent l’UE : contrôles à l’exportation, autorisations (biens à double usage et autres), interdictions par destination et unité supplémentaire de la déclaration d’exportation.

Mesures 1
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Export prohibition 278
Contrôles et documents 4
BY
Belarus BY
25-02-2025
Document requis
interdit sans document
Export control 766
UA
Ukraine UA
25-02-2025
Document requis
interdit sans document
Export control 709
UA
Ukraine UA
25-08-2022
Document requis
interdit sans document
Export control 767
RU
Russian Federation RU
27-09-2024
Document requis
interdit sans document
Export control 709

Historique

Taux de droit et mesures pour ce code dans le temps (versions annuelles).

Règles d’origine préférentielles pour 8536000000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chili

    EU-Algeria Association Agreement · Algérie

    EU-Egypt Association Agreement · Égypte

    EU-Jordan Association Agreement · Jordanie

    EU-Morocco Association Agreement · Maroc

    EU-Tunisia Association Agreement · Tunisie

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits / or: Manufacture in which: the value of all the materials used does not exceed 40 % of the ex-works price of the product, and within the above limit, the value of all the materials of heading 8538 used does not exceed 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EPA CARIFORUM

    EPA Pacific · Fidji, Îles Salomon, Papouasie-Nouvelle-Guinée, Samoa

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits / or: Manufacture: – in which the value of all the materials used does not exceed 40 % of the ex-works price of the product; – where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading, except from heading 85.38; or A change from heading 85.38, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in heading 85.38 does not exceed 50 per cent of the transaction value or ex-works price of the product.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

    Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 60 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading No 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading No 8517 / or: Manufacture: in which the value of all the materials used does not exceed 40 % of the ex-works price of the product; where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits / or: Manufacture: in which the value of all the materials used does not exceed 40 % of the ex-works price of the product; where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits; connectors for optical fibres, optical fibre bundles or cables; boards, panels, consoles, desks, cabinets and other bases, for electric control or the distribution of electricity / or: (a) LDCs Manufacture from materials of any heading, except that of the product and of heading 8538 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product and of heading 8538 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Israel Association Agreement · Israël

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits / or: Manufacture: in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, and where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits; connectors for optical fibres, optical fibre bundles or cables; boards, panels, consoles, desks, cabinets and other bases, for electric control or the distribution of electricity / or: Manufacture from materials of any heading, except that of the product and of heading 8538 or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

  • EU-Japan EPA · Japon

    CTH except from heading 85.38; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Korea FTA · Corée du Sud

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1000 V; connectors for optical fibres, optical fibre bundles or cables / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Lebanon Association Agreement · Liban

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits / or: Manufacture in which: the value of all the materials used does not exceed 40 % of the ex-works price of the product, within the above limit, the value of all the materials of heading 8538 used does not exceed 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU-Mexico Global Agreement · Mexique

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits / or: Manufacture: in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits / or: Manufacture: in which the value of all the materials used does not exceed 40% of the ex-works price of the product; where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product

  • EU-Singapore FTA · Singapour

    Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits; connectors for optical fibres, optical fibre bundles or cables; boards, panels, consoles, desks, cabinets and other bases, for electric control or the distribution of electricity / or: Manufacture from materials of any heading, except that of the product and of heading 8538. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Viet Nam FTA · Viêt Nam

    electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits; connectors for optical fibres, optical fibre bundles or cables; boards, panels, consoles, desks, cabinets and other bases, for electric control or the distribution of electricity; / or: Manufacture from materials of any heading, except that of the product and of heading 8538; or manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 8536000000

8536 Notes explicatives de la nomenclature combinée: Appareillage pour la coupure, le sectionnement, la protection, le branchement, le raccordement ou la connexion des circuits électriques (interrupteurs, commutateurs, relais, coupe-circuit, étaleurs d'ondes, fiches et prises de courant, douilles pour lampes et autres connecteurs, boîtes de jonction, par exemple), pour une tension n’excédant pas 1 000 V; connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques

Outre les appareils décrits dans les notes explicatives du SH, no 8536, cette position comprend: 1. les répartiteurs pour centraux téléphoniques; 2. les plaques de croisement ou de bifurcation pour lignes aériennes de tramways; 3. les plaques de branchement pour moteurs électriques; 4. les commutateurs pour transformateurs à prises multiples; 5. les pièces de connexion pour éléments d'accumulateurs; 6. les appareils dits «interrupteurs inductifs d'approche»: ce sont des interrupteurs électroniques incorporant une bobine d'inductance à rayonnement libre destinée à actionner l'interrupteur (fermer le circuit) sans contact physique quand un objet métallique entre dans le champ de dispersion de la bobine. Ces interrupteurs remplacent des interrupteurs électriques de fin de course fonctionnant mécaniquement notamment dans des machines-outils, des convoyeurs ou des balances; 7. les interrupteurs montés dans un même logement avec un régulateur d'intensité de lumière (dimmer). Ces appareils permettent non seulement d'allumer ou d'éteindre des appareils d'éclairage raccordés au réseau mais peuvent également régler variablement leur degré de luminosité; 8. les appareils dits «nattes de contact» pour connecter des circuits électriques. Elles consistent en deux feuilles élastiques en matière plastique superposées, dans lesquelles sont enrobés, à distance régulière, un nombre élevé de points conducteurs de contact. Les nattes de l'espèce sont notamment montées en dessous du clavier de postes téléphoniques d'usagers. S'il est appuyé sur une touche, les points de contact correspondants des deux feuilles se touchent et établissent le contact électrique; 9. les interrupteurs électroniques qui, sans contact physique, ferment ou coupent un circuit à l'aide de dispositifs à semi-conducteur (transistors, thyristors, circuits intégrés, par exemple). Par contre, ne relèvent pas de la présente position, par exemple: a) les ferrures pour lignes électriques (notamment no 7326); b) les appareils de commande pour voies ferrées ou autres voies de communication (no 8530).

8536 50 11 Notes explicatives de la nomenclature combinée: à touche ou à bouton

Ne relèvent pas de cette sous-position les touches à effet tactile (sous-position 8536 50 19).

8536 69 10 Notes explicatives de la nomenclature combinée: pour câbles coaxiaux

Relèvent uniquement de cette sous-position les connecteurs mâles et femelles utilisés pour les connexions coaxiales (exemples: voir les figures 1 à 6).

8536 69 30 Notes explicatives de la nomenclature combinée: pour circuits imprimés

Relèvent de cette sous-position les fiches et prises qui sont destinées à être directement fixées à un circuit imprimé ou à un circuit imprimé souple sur au moins un côté de la fiche ou de la prise (voir les exemples ci-dessous). 1. Ce connecteur USB n’est pas destiné à être directement fixé à un circuit imprimé et est dès lors exclu de cette sous-position. 2. Cette prise femelle USB est destinée à être directement fixée à un circuit imprimé et relève dès lors de cette sous-position.

8536 90 01 Notes explicatives de la nomenclature combinée: Éléments préfabriqués pour canalisations électriques

Cette sous-position comprend les éléments pour le transport de l'électricité livrés prêts à être montés. Ils offrent une certaine souplesse en ce qui concerne les possibilités de branchement des lampes ainsi que des machines et appareils fonctionnant à l'électricité. La prise du courant s'effectue au moyen de contacts à serrage ou à glissement. Les dessins ci-dessous illustrent quelques exemples d'assemblage de ce système.

8536 90 10 Notes explicatives de la nomenclature combinée: Connexions et éléments de contact pour fils et câbles

Relèvent en particulier de cette sous-position les éléments de contact de fin de course placés à l'extrémité des fils ou des câbles et pour lesquels le raccordement électrique s'effectue par d'autres moyens que par enfichage (raccords à vis, par serrage, Crimp ou à souder)

8536 69 10 - 8536 69 90 Notes explicatives de la nomenclature combinée: à 8536 69 90

autres Ces sous-positions comprennent les fiches (connecteurs «mâles») et les prises de courant (connecteurs «femelles») en tant que dispositifs électriques permettant des opérations de raccordement, par exemple d’appareils, de câbles et de cartes imprimées. Les connecteurs peuvent présenter soit une partie mâle ou une partie femelle aux deux extrémités, soit une partie mâle ou une partie femelle d’un côté et un autre type de contact de l’autre (connecteurs Crimp, à mâchoire, à souder ou à vis, par exemple). Exemples: voir les photos 1 et 2. Photo 1: À une extrémité, le câble est raccordé au connecteur à l’aide d’une connexion Crimp ou à mâchoire. À l’autre extrémité, le raccordement est effectué en emboîtant le connecteur mâle ou femelle. Photo 2: À une extrémité, le câble est raccordé au connecteur à l’aide d’une connexion Crimp ou à mâchoire. À l’autre extrémité, le raccordement est effectué en emboîtant le connecteur femelle. En outre, ce connecteur est également doté d’une connexion supplémentaire sous la forme d’un connecteur mâle. Ces sous-positions comprennent également les paires de connecteurs consistant en l’association d’une fiche et d’une prise de courant (deux pièces distinctes). Ces connecteurs mâles ou femelles sont munis à l’autre extrémité d’un autre type de contact. Ne relèvent pas de ces sous-positions les éléments de connexion ou de contact pour lesquels le raccordement électrique est uniquement effectué par d’autres méthodes que par enfichage (connecteurs Crimp, à vis, à souder ou à mâchoire, par exemple). Ces éléments relèvent de la sous-position 8536 90 (exemples: voir les photos 3 à 7). Toutefois, les connecteurs mâles et femelles à filets intérieurs ou extérieurs relèvent de ces sous-positions. Photos 3 et 4: À une extrémité, le câble est raccordé au connecteur à l’aide d’une connexion Crimp ou à mâchoire. À l’autre extrémité, le raccordement est effectué au moyen d’une vis ou d’un boulon à écrou. Photos 5, 6 et 7: Le raccordement électrique n’est pas effectué par enfichage. Aucun connecteur mâle ou femelle n’entre en jeu. Le raccordement électrique est effectué par vissage ou par serrage.

Notes du chapitre 85

Notes 1. Sont exclus de ce chapitre: a) les couvertures, coussins, chancelières et articles similaires chauffés électriquement; les vêtements, chaussures, chauffe-oreilles et autres articles chauffés électriquement se portant sur la personne; b) les ouvrages en verre du no 7011; c) les machines et appareils du no 8486; d) les aspirateurs des types utilisés en médecine, en chirurgie ou pour l’art dentaire ou vétérinaire (no 9018); ou e) les meubles chauffés électriquement du chapitre 94. 2. Les articles susceptibles de relever des nos 8501 à 8504, d'une part, et des nos 8511, 8512, 8540, 8541 ou 8542, d'autre part, sont classés dans ces cinq dernières positions. Toutefois, les mutateurs à vapeur de mercure à cuve métallique restent compris au no 8504. 3. Au sens du n° 8507, l’expression accumulateurs électriques comprend également les accumulateurs présentés avec des éléments auxiliaires qui contribuent à la fonction de stockage et de fourniture d’énergie remplie par l’accumulateur ou qui sont destinés à protéger ce dernier de dommages éventuels, tels que des connecteurs électriques, des dispositifs de contrôle de la température (des thermistors, par exemple) et des dispositifs de protection du circuit. Ils peuvent également comporter une partie de l’enveloppe protectrice des appareils auxquels ils sont destinés. 4. Le no 8509 couvre, sous réserve qu'il s'agisse d'appareils électromécaniques des types communément utilisés à des usages domestiques: a) les cireuses à parquets, broyeurs et mélangeurs pour aliments, presse-fruits et presse-légumes, de tous poids; b) les autres appareils d'un poids maximal de 20 kilogrammes, à l'exclusion des ventilateurs et des hottes aspirantes à extraction ou à recyclage à ventilateur incorporé, même filtrantes (no 8414), des essoreuses centrifuges à linge (no 8421), des machines à laver la vaisselle (no 8422), des machines à laver le linge (no 8450), des machines à repasser (nos 8420 ou 8451, selon qu'il s'agit de calandres ou non), des machines à coudre (no 8452), des ciseaux électriques (no 8467) et des appareils électrothermiques (no 8516). 5. Au sens du n° 8517, on entend par téléphones intelligents les téléphones pour réseaux cellulaires, équipés d’un système d’exploitation conçu pour assurer les fonctions d’une machine automatique de traitement de l’information telles que le téléchargement et le fonctionnement de manière simultanée de plusieurs applications, y compris des applications tierces, et même dotés d’autres fonctionnalités telles qu’un appareil photographique numérique ou un système de navigation. 6. Au sens du no 8523 : a) on entend par «dispositifs de stockage rémanent des données à base de semi-conducteurs» («cartes mémoire flash» ou «cartes à mémoire électronique flash», par exemple) les dispositifs de stockage ayant une fiche de connexion, comportant, sous une même enveloppe, une ou plusieurs mémoires flash («E2PROM FLASH», par exemple), sous forme de circuits intégrés, montés sur une carte de circuits imprimés. Ils peuvent comporter un contrôleur se présentant sous la forme d'un circuit intégré et des composants discrets passifs comme des condensateurs et des résistances; b) l'expression «cartes intelligentes» s'entend des cartes qui comportent, noyés dans la masse, un ou plusieurs circuits intégrés électroniques [un microprocesseur, une mémoire vive (RAM) ou une mémoire morte (ROM)] sous forme de puces. Ces cartes peuvent être munies des contacts, d'une bande magnétique ou d'une antenne intégrée mais ne contiennent pas d'autres éléments de circuit actifs ou passifs. 7. Au sens du n° 8524, on entend par modules d’affichage à écran plat les dispositifs ou appareils destinés à afficher des informations, équipés au minimum d’un écran d’affichage, qui sont conçus pour être incorporés dans des articles relevant d’autres positions avant leur utilisation. Les écrans de visualisation des modules d’affichage à écran plat peuvent notamment – mais pas seulement – être plats, incurvés, flexibles, pliables ou extensibles. Les modules d’affichage à écran plat peuvent incorporer des éléments supplémentaires, y compris ceux nécessaires à la réception de signaux vidéo et à la répartition de ces signaux en pixels sur l’écran. Toutefois, le n° 8524 ne comprend pas les modules d’affichage dotés de composants destinés à convertir des signaux vidéo (par exemple, un circuit intégré pour scaler, un circuit intégré pour décodeur ou un processeur d’application) ou qui ont pris le caractère de marchandises d’autres positions. Aux fins du classement des modules d’affichage à écran plat définis dans la présente note, le n° 8524 a priorité sur toute autre position de la Nomenclature. 8. On considère comme «circuits imprimés» au sens du no 8534 les circuits obtenus en disposant sur un support isolant, par tout procédé d'impression (incrustation, électrodéposition, morsure, notamment) ou par la technologie des circuits dits «à couche», des éléments conducteurs, des contacts ou d'autres composants imprimés (inductances, résistances, capacités, par exemple) seuls ou combinés entre eux selon un schéma préétabli, à l'exclusion de tout élément pouvant produire, redresser, moduler ou amplifier un signal électrique (éléments à semi-conducteur, par exemple). L'expression «circuits imprimés» ne couvre ni les circuits combinés avec des éléments autres que ceux obtenus au cours du processus d'impression, ni les résistances, condensateurs ou inductances discrets. Toutefois, les circuits imprimés peuvent être munis d'éléments de connexion non imprimés. Les circuits à couche (mince ou épaisse) comportant des éléments passifs et actifs obtenus au cours du même processus technologique relèvent du no 8542. 9. Aux fins du no 8536, on entend par «connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques» les connecteurs qui servent simplement à aligner mécaniquement les fibres optiques bout-à-bout dans un système numérique à ligne. Ils ne remplissent aucune autre fonction telle que l'amplification, la régénération ou la modification d'un signal. 10. Le no 8537 ne comprend pas les dispositifs sans fil à rayons infrarouges pour la commande à distance des appareils récepteurs de télévision et d'autres appareils électriques (no 8543). 11. Au sens du n° 8539, l’expression sources lumineuses à diodes émettrices de lumière (LED) couvre: a) ‘les modules à diodes émettrices de lumière (LED), qui sont des sources lumineuses électriques basées sur les diodes émettrices de lumière (LED), disposées en circuits électriques et comportant des éléments électriques, mécaniques, thermiques ou optiques. Ils contiennent aussi des éléments discrets actifs ou passifs ou des articles des nos 8536 ou 8542 dans le but de fournir l’alimentation ou de contrôler la puissance. Les modules à diodes émettrices de lumière (LED) ne possèdent pas de culot conçu pour être facilement installé ou remplacé dans un luminaire et pour permettre le contact électrique et la fixation mécanique; b) les lampes et tubes à diodes émettrices de lumière (LED), qui sont des sources lumineuses électriques composées d’un ou plusieurs modules à LED, contenant d’autres éléments tels que des éléments électriques, mécaniques, thermiques ou optiques. Ils se distinguent des modules à diodes émettrices de lumière (LED) par leur culot conçu pour être facilement installé ou remplacé dans un luminaire et pour permettre le contact électrique et la fixation mécanique. 12. Au sens des nos 8541 et 8542, on considère comme: a) i) Dispositifs à semi-conducteur, les dispositifs dont le fonctionnement repose sur la variation de la résistivité sous l’influence d'un champ électrique ou les transducteurs à semi-conducteur. Les dispositifs à semi-conducteur peuvent également inclure un assemblage de plusieurs éléments, même équipés de dispositifs actifs ou passifs dont la fonction est auxiliaire. Les transducteurs à semi-conducteur, aux fins de cette définition, sont les capteurs à semi-conducteur, les actionneurs à semi-conducteur, les résonateurs à semi-conducteur et les oscillateurs à semi-conducteur, qui sont des types de dispositifs discrets à semi-conducteur, qui remplissent une fonction intrinsèque, qui peuvent convertir tout type de phénomène physique ou chimique ou une action en signal électrique ou convertir un signal électrique en tout type de phénomène physique ou une action. Tous les éléments composant un transducteur sont réunis de façon pratiquement indissociable et peuvent également comprendre des matériaux indissociables nécessaires à la construction ou au fonctionnement d'un dispositif à semi-conducteur. Aux fins de la présente définition: 1) L’expression à semi-conducteur signifie construit ou fabriqué sur un substrat de semi-conducteur ou constitué de matériaux à base de semi-conducteur, fabriqués au moyen de la technologie de semi-conducteurs, dans lesquels le substrat ou matériaux semi-conducteur joue un rôle critique et irremplaçable sur la fonction et les performances du transducteur et dont le fonctionnement est basé sur les propriétés semi conductrices, physiques, électriques, chimiques et optiques. 2) Les phénomènes physiques ou chimiques ont trait à des phénomènes tels que la pression, les ondes sonores, l’accélération, la vibration, le mouvement, l’orientation, la contrainte, l’intensité de champ magnétique, l’intensité de champ électrique, la lumière, la radioactivité, l’humidité, le fluage, la concentration de produits chimiques, etc. 3) Les capteurs à semi-conducteur sont un type de dispositifs à semi-conducteur constitués par des structures microélectroniques ou mécaniques qui sont créées dans la masse ou à la surface d’un semi-conducteur et dont la fonction est de détecter des quantités physiques ou chimiques et de les convertir en signaux électriques produits par les variations résultantes de propriétés électriques ou une déformation de la structure mécanique. 4) Les actionneurs à semi-conducteur sont un type de dispositifs à semi-conducteur constitués par des structures microélectroniques et mécaniques qui sont créées dans la masse ou à la surface d’un semi-conducteur et dont la fonction est de convertir les signaux électriques en mouvement physique. 5) Les résonateurs à semi-conducteurs sont un type de dispositifs à semi-conducteur constitués par des structures microélectroniques et mécaniques qui sont créées dans la masse ou à la surface d’un semi-conducteur et dont la fonction est de générer une oscillation mécanique ou électrique d’une fréquence prédéfinie qui dépend de la géométrie physique de ces structures en réponse à un signal électrique externe. 6) Les oscillateurs à semi-conducteurs sont un type de dispositifs à semi-conducteur constitués par des structures microélectroniques ou mécaniques qui sont créées dans la masse ou à la surface d’un semi-conducteur et dont la fonction est de générer une oscillation mécanique ou électrique d’une fréquence prédéfinie qui dépend de la géométrie physique de ces structures. ii) ‘Les diodes émettrices de lumière (LED) sont des dispositifs à semi-conducteur fabriqués à partir de matériaux semi-conducteurs, qui transforment l'énergie électrique en rayonnements visibles, infrarouges ou ultraviolets, même connectées électriquement entre elles et même combinées avec des diodes de protection. Les diodes émettrices de lumière (LED) du n° 8541 ne comportent pas d'éléments dans le but de fournir l’alimentation ou de contrôler la puissance. b) «circuits intégrés»: 1) les circuits intégrés monolithiques dans lesquels les éléments du circuit (diodes, transistors, résistances, capacités, inductances, etc.) sont créés dans la masse (essentiellement) et à la surface d'un matériau semi-conducteur (par exemple, silicium dopé, arséniure de gallium, silicium-germanium, phosphure d’indium), formant un tout indissociable; 2) les circuits intégrés hybrides réunissant, de façon pratiquement indissociable, par interconnexions ou câbles de liaison, sur un même substrat isolant (verre, céramique, etc.) des éléments passifs (résistances, capacités, inductances, etc.), obtenus par la technologie des circuits à couche mince ou épaisse et des éléments actifs (diodes, transistors, circuits intégrés monolithiques, etc.) obtenus par la technologie des semi-conducteurs. Ces circuits peuvent inclure également des composants discrets; 3) les circuits intégrés à puces multiples constitués de deux ou plusieurs circuits intégrés monolithiques interconnectés, combinés de façon pratiquement indissociable, reposant ou non sur un ou plusieurs substrats isolants et comportant ou non des broches, mais sans autres éléments de circuit actifs ou passifs; 4) les circuits intégrés à composants multiples, qui sont des combinaisons d’un ou plusieurs circuits intégrés monolithiques, hybrides ou à puces multiples et comprenant au moins un des composants suivants : capteurs, actionneurs, oscillateurs, résonateurs au silicium, même combinés entre eux, ou composants assurant les fonctions des articles susceptibles de relever des nos8532, 8533, 8541, ou des inducteurs susceptibles de relever du n° 8504, et qui sont réunis de façon pratiquement indissociable en un seul corps comme un circuit intégré, pour former un composant du type de ceux utilisés pour être assemblés sur une carte de circuit imprimé ou un autre support, en reliant les broches, fils de connexion, rotules, pastilles, bosses ou disques. Aux fins de la présente définition: 1) Les composants peuvent être discrets, fabriqués indépendamment les uns des autres, puis assemblés en un circuit intégré à composants multiples ou intégrés à d’autres composants. 2) L’expression au silicium signifie que le composant est fabriqué sur un substrat de silicium ou constitué de matières à base de silicium ou encore fabriqué sur une puce de circuit intégré. 3) a) Les capteurs au silicium sont constitués par des structures microélectroniques ou mécaniques qui sont créées dans la masse ou à la surface d’un semi-conducteur et dont la fonction est de détecter des phénomènes physiques ou chimiques et de les convertir en signaux électriques lorsque se produisent des variations de propriétés électriques ou une déformation de la structure mécanique. Les phénomènes physiques ou chimiques ont trait à des phénomènes tels que la pression, les ondes sonores, l’accélération, la vibration, le mouvement, l’orientation, la contrainte, l’intensité de champ magnétique, l’intensité de champ électrique, la lumière, la radioactivité, l’humidité, le fluage, la concentration de produits chimiques, etc. b) Les actionneurs au silicium sont constitués par des structures microélectroniques et mécaniques qui sont créées dans la masse ou à la surface d’un semi-conducteur et dont la fonction est de convertir les signaux électriques en mouvement physique. c) Les résonateurs au silicium sont des composants qui sont constitués par des structures microélectroniques ou mécaniques qui sont créées dans la masse ou à la surface d’un semi-conducteur et dont la fonction est de générer une oscillation mécanique ou électrique d’une fréquence prédéfinie qui dépend de la géométrie physique de ces structures en réponse à un apport externe. d) Les oscillateurs au silicium sont des composants actifs constitués par des structures microélectroniques ou mécaniques qui sont créées dans la masse ou à la surface d’un semi-conducteur et dont la fonction est de générer une oscillation mécanique ou électrique d’une fréquence prédéfinie qui dépend de la géométrie physique de ces structures. Aux fins du classement des articles définis dans la présente note, les nos 8541 et 8542 ont priorité sur toute autre position de la nomenclature, à l'exception du no 8523 susceptible de les couvrir en raison notamment de leur fonction. Notes de sous-positions 1. Le n° 8525 81 comprend uniquement les caméras de télévision, les appareils photographiques numériques et les caméscopes ultrarapides qui possèdent une ou plusieurs des caractéristiques suivantes : - vitesse d’enregistrement supérieure à 0,5 mm par microseconde; - résolution temporelle de 50 nanosecondes ou moins; - fréquence d’image excédant 225 000 images par seconde. 2. En ce qui concerne le n° 8525 82, les caméras résistant aux rayonnements sont conçues ou blindées de façon à pouvoir fonctionner dans des environnements soumis à des rayonnements élevés. Ces caméras sont conçues pour résister à une dose de rayonnement totale de plus de 50 × 103 Gy (silicium) (5 × 106 rad (silicium)) sans que leur fonctionnement soit altéré. 3. La sous-position 8525 83 couvre les caméras de télévision, les appareils photographiques numériques et les caméscopes à vision nocturne qui utilisent une photocathode pour convertir la lumière naturelle disponible en électrons qui peuvent être amplifiés et convertis pour produire une image visible. Cette sous-position exclut les caméras à imagerie thermique (n° 8525 89, généralement). 4. Le no 8527 12 couvre uniquement les radiocassettes avec amplificateur incorporé, sans haut-parleur incorporé, pouvant fonctionner sans source d'énergie électrique extérieure, et dont les dimensions n'excèdent pas 170 mm × 100 mm × 45 mm. 5. Au sens des nos8549 11 à 8549 19, on entend par piles et batteries de piles électriques hors d’usage et accumulateurs électriques hors d’usage ceux qui sont devenues inutilisables en tant que tels par suite de bris, découpage, usure ou autres motifs ou qui ne sont pas susceptibles d'être rechargés. Note complémentaire 1. Les sous-positions 8519 20 10 et 8519 30 00 ne comprennent pas les appareils de reproduction du son à système de lecture par faisceau laser.

Notes de la section XVI

MACHINES ET APPAREILS, MATÉRIEL ÉLECTRIQUE ET LEURS PARTIES; APPAREILS D'ENREGISTREMENT OU DE REPRODUCTION DU SON, APPAREILS D'ENREGISTREMENT OU DE REPRODUCTION DES IMAGES ET DU SON EN TÉLÉVISION, ET PARTIES ET ACCESSOIRES DE CES APPAREILS Notes 1. La présente section ne comprend pas: a) les courroies transporteuses ou de transmission en matières plastiques du chapitre 39 ou en caoutchouc vulcanisé (no 4010), ou autres articles du même type que ceux utilisés dans les machines ou appareils mécaniques ou électriques ou pour d’autres usages techniques en caoutchouc vulcanisé non durci (no 4016); b) les articles à usages techniques en cuir naturel ou reconstitué (no 4205) ou en pelleteries (no 4303); c) les canettes, fusettes, tubes, bobines et supports similaires en toutes matières (chapitres 39, 40, 44, 48 ou section XV, par exemple); d) les cartes perforées pour mécaniques Jacquard ou machines similaires (chapitres 39 ou 48 ou section XV, par exemple); e) les courroies transporteuses ou de transmission en matières textiles (no 5910), ainsi que les articles pour usages techniques en matières textiles (no 5911); f) les pierres gemmes, les pierres synthétiques ou reconstituées des nos 7102 à 7104, ainsi que les ouvrages entièrement en ces matières du no 7116, à l'exception toutefois des saphirs et des diamants travaillés, non montés, pour pointes de lecture (no 8522); g) les parties et fournitures d'emploi général, au sens de la note 2 de la section XV, en métaux communs (section XV), et les articles similaires en matières plastiques (chapitre 39); h) les tiges de forage (no 7304); ij) les toiles et courroies sans fin en fils ou en bandes métalliques (section XV); k) les articles des chapitres 82 ou 83; l) les articles de la section XVII; m) les articles du chapitre 90; n) les articles d'horlogerie (chapitre 91); o) les outils interchangeables du no 8207 et les brosses constituant des éléments de machines (no 9603), ainsi que les outils interchangeables similaires qui sont à classer d'après la matière constitutive de leur partie travaillante (chapitres 40, 42, 43, 45, 59, nos 6804, 6909, par exemple); p) les articles du chapitre 95; q) les rubans encreurs pour machines à écrire et rubans encreurs similaires, même montés sur bobines ou en cartouches (régime de la matière constitutive ou no 9612 s'ils sont encrés ou autrement préparés en vue de laisser les empreintes), ainsi que les monopodes, les bipieds, les trépieds et articles similaires, du no 9620. 2. Sous réserve des dispositions de la note 1 de la présente section et de la note 1 des chapitres 84 et 85, les parties de machines (à l'exception des parties des articles des nos 8484, 8544, 8545, 8546 ou 8547) sont classées conformément aux règles ci-après: a) les parties consistant en articles compris dans l'une quelconque des positions des chapitres 84 ou 85 (à l'exception des nos 8409, 8431, 8448, 8466, 8473, 8487, 8503, 8522, 8529, 8538 et 8548) relèvent de ladite position, quelle que soit la machine à laquelle elles sont destinées; b) lorsqu'elles sont reconnaissables comme exclusivement ou principalement destinées à une machine particulière ou à plusieurs machines d'une même position (même des nos 8479 ou 8543), les parties, autres que celles visées au paragraphe précédent, sont classées dans la position afférente à cette ou à ces machines ou, selon le cas, dans les nos 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 ou 8538; toutefois, les parties destinées principalement aussi bien aux articles du no 8517 qu'à ceux des nos 8525 à 8528, sont rangées au no 8517, et les autres parties exclusivement ou principalement destinées aux articles du no 8524 sont à classer dans le no 8529. c) les autres parties relèvent des nos 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 ou 8538, selon le cas, ou, à défaut, des nos 8487 ou 8548. 3. Sauf dispositions contraires, les combinaisons de machines d'espèces différentes destinées à fonctionner ensemble et ne constituant qu'un seul corps, ainsi que les machines conçues pour assurer deux ou plusieurs fonctions différentes, alternatives ou complémentaires, sont classées suivant la fonction principale qui caractérise l'ensemble. 4. Lorsqu'une machine ou une combinaison de machines sont constituées par des éléments distincts (même séparés ou reliés entre eux par des conduites, des dispositifs de transmission, des câbles électriques ou autre aménagement) en vue d'assurer concurremment une fonction bien déterminée comprise dans l'une des positions du chapitre 84 ou du chapitre 85, l'ensemble est à classer dans la position correspondant à la fonction qu'il assure. 5. Pour l'application des notes qui précèdent, la dénomination «machines» couvre les machines, appareils, dispositifs, engins et matériels divers cités dans les positions des chapitres 84 ou 85. 6. A) Dans la nomenclature, l’expression déchets et débris électriques et électroniques désigne des assemblages électriques et électroniques et des cartes de circuits imprimés ainsi que des articles électriques ou électroniques qui: a) ont été rendus inutilisables pour leur fonction d'origine par suite de bris, découpage ou autres processus ou pour lesquels une réparation, une remise en état ou une restauration visant à rétablir leurs fonctions d'origine serait économiquement inappropriée; b) sont emballés ou expédiés de telle manière que les articles ne sont pas protégés séparément d'éventuels dégâts qui pourraient survenir durant le transport, le chargement ou le déchargement. B) Les envois contenant un mélange de déchets et débris électriques et électroniques et d’autres déchets et débris doivent être classés dans le no8549. C) La présente section ne couvre pas les déchets municipaux tels que définis dans la note 4 du chapitre 38. Notes complémentaires 1. Les outils nécessaires au montage ou à l'entretien des machines suivent le régime de celles-ci, lorsqu'ils sont présentés au dédouanement en même temps que ces machines. Le même régime est applicable aux outils interchangeables qui sont présentés en même temps que les machines dont ils constituent l'équipement normal et pour autant qu'ils soient normalement vendus avec celles-ci. 2. Le déclarant en douane est tenu de produire à l'appui de sa déclaration, si le service de la douane l'exige, un document illustré (notice, prospectus, page de catalogue, photographie, etc.) indiquant la désignation courante de la machine, ses usages et ses caractéristiques essentielles et, pour les machines présentées à l'état démonté ou non monté, un plan de montage et un inventaire du contenu des différents colis. 3. À la demande du déclarant en douane et aux conditions fixées par les autorités compétentes, les dispositions de la règle générale 2 a) pour l'interprétation de la nomenclature sont également applicables aux machines présentées par envois échelonnés.

Autres notes explicatives du chapitre

Note complémentaire 2 La note explicative relative à la note complémentaire 3 de la section XVI est applicable mutatis mutandis.

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Règlements de classement de l’UE pour 8536000000

Règlements de la Commission qui ont classé des marchandises précises sous ce code. Ils lient les douanes de tous les États membres pour des marchandises identiques.

  • 8536 50 19 20 mai 2014 · Règlement sur EUR-Lex
    Appareil (appelé «détecteur de flamme») composé de capteurs passifs à infrarouges et à ultraviolets, d'un filtre optique, d'un module d'analyse, de trois relais de sortie (alarme incendie, relais de dysfonctionnement et auxiliaire) et d'une LED d'état à trois couleurs (indiquant un fonctionnement normal, un incendie ou un dysfonctionnement), dans un boîtier cylindrique d'un diamètre d'environ 12 cm et d'une hauteur approximative de 25 cm. Sa plage de fonctionnement s'étend de 18 à 30 V DC (courant continu).

    L'appareil est un élément d'un système d'alarme incendie. Les capteurs détectent simultanément les rayonnements ultraviolets et infrarouges émis par un feu. Lorsque l'intensité des rayonnements émis dépasse un certain seuil, l'appareil envoie un signal électrique au système d'alarme incendie via le relais d'alarme incendie. Le système d'alarme incendie n'est pas inclus lors de la présentation.

    Motifs

    Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée et par le libellé des codes NC 8536 , 8536 50 et 8536 50 19 . Le classement dans la position 8531 en tant qu'appareil électrique de signalisation acoustique ou visuelle est exclu parce que l'appareil n'est pas en lui-même un dispositif avertisseur [voir également les notes explicatives du système harmonisé relatives à la position 8531 , point H)]. Le classement dans la position 8537 en tant qu'appareil comportant plusieurs appareils des positions 8535 ou 8536 est également exclu parce que l'appareil ne comporte que des appareils de la position 8536 du même type (trois relais) [voir également les notes explicatives du système harmonisé relatives à la position 8537 , exclusion b)]. L'appareil détecte uniquement le dépassement d'un certain seuil du rayonnement émis par un feu, sans indiquer de valeur exacte. La détection des modifications du rayonnement et la réalisation de mesures calorimétriques sont deux opérations différentes. Le classement dans la position 9027 en tant qu'appareil ou instrument pour mesures calorimétriques est donc également exclu. L'appareil remplit la fonction d'interrupteur automatique et est donc classé sous le code NC 8536 50 19 en tant qu'autres interrupteurs, sectionneurs et commutateurs pour une tension n'excédant pas 60 V.

  • 8536 50 19 26 nov. 2012 · Règlement sur EUR-Lex
    Appareil (dénommé «détecteur infrarouge passif») consistant en une carte de circuits imprimés logée dans un boîtier en plastique dont les dimensions approximatives sont de 11 × 7 × 4 cm.

    La carte de circuits imprimés est équipée d’un capteur infrarouge, d’éléments passifs (condensateurs, résistances), d’éléments actifs (transistors, circuits intégrés) et d’une diode électroluminescente. Elle comporte également un commutateur DIP, un interrupteur inviolable, un domino de raccordement à vis et une sortie du type relais à semi-conducteurs. Le boîtier comporte une surface réfléchissante et une lentille. L’appareil délivre un signal de sortie pouvant atteindre 30 V CC et 50 mA. L’appareil est conçu pour envoyer un signal électrique à un appareil tel qu’un système d’alarme ou une porte électrique, lorsqu’un mouvement est détecté grâce aux variations de température.

    Motifs

    Le classement est déterminé par les règles générales 1 et 6 pour l’interprétation de la nomenclature combinée et par le libellé des codes NC 8536 , 8536 50 et 8536 50 19 . Un classement dans la position tarifaire 8531 en tant qu'appareil électrique de signalisation acoustique ou visuelle est exclu car l’appareil n’a pas de fonction d'alarme autonome. La position 8537 couvre les tableaux, panneaux, consoles, pupitres, armoires et autres supports comportant plusieurs appareils des no8535 ou 8536 . L’appareil ne comportant que des composants du même type (deux interrupteurs du type relais à semi-conducteurs), un classement dans la position tarifaire 8537 est dès lors exclu (voir également les notes explicatives du SH relatives à la position 8537 , exclusion b)). Un classement dans la position 9027 en tant qu’instrument et appareil pour mesures calorimétriques est également exclu car l’appareil ne mesure pas des quantités, mais détecte simplement les variations de température afin d’activer automatiquement un autre appareil. L’appareil remplit la fonction d’un interrupteur automatique et doit dès lors être classé sous le code NC 8536 50 19 en tant qu’interrupteur pour une tension n’excédant pas 60 V.

  • 8536 50 80 29 avr. 2014 · Règlement sur EUR-Lex
    Produit (appelé «jeu de prises radiocommandées») présenté dans un emballage contenant deux interrupteurs contrôlés à distance et une télécommande.

    Chaque interrupteur contrôlé à distance est placé dans un boîtier séparé, composé d'une fiche (contact mâle), d'une prise (contact femelle), d'un bouton d'apprentissage, d'un interrupteur et d'un récepteur radio, et est conçu pour une tension maximale de 230 V et une intensité maximale de 10 A. Le bouton d'apprentissage est utilisé pour qu'il y ait identification entre l'interrupteur et la télécommande. Il peut aussi être utilisé comme un interrupteur manuel. La télécommande fonctionne avec une fréquence de transmission comprise entre 433,05 et 434,79 MHz, sur une distance d'environ 30 mètres, et contrôle les deux interrupteurs indépendamment l'un de l'autre. Le produit est utilisé pour allumer et éteindre, par télécommande, l'équipement relié aux prises.

    Motifs

    Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée et par le libellé des codes NC 8536 , 8536 50 et 8536 50 80 . La télécommande contrôle les interrupteurs indépendamment l'un de l'autre. En conséquence, le produit ne peut être considéré comme une unité fonctionnelle conformément à la note 4 de la section XVI, car ses composantes individuelles réunies ne permettent pas de définir clairement une fonction. Étant donné ses caractéristiques objectives, le produit a pour fonction d'allumer et d'éteindre, au moyen d'une télécommande, l'équipement relié aux interrupteurs. Par conséquent, le classement dans la position tarifaire 8526 en tant qu'appareil de radiotélécommande est exclu. Comme le produit est utilisé en tant qu'interrupteur télécommandé, la fiche (contact mâle) et la prise (contact femelle) sont considérées comme des éléments indispensables à son fonctionnement. En conséquence, le classement dans la sous-position 8536 69 90 en tant que fiches et prises de courant est exclu. Le produit doit donc être classé sous le code NC 8536 50 80 comme autres interrupteurs pour une tension n'excédant pas 60 V.

+ 3 de plus
  • 8536 50 80 29 avr. 2014 · Règlement sur EUR-Lex
    Appareil électronique numérique pourvu de quatre entrées HDMI (interface multimédia haute définition) et d'une sortie HDMI (appelé «commutateur HDMI passif») dans un boîtier mesurant environ 18 × 12 × 3 cm.

    Il est pourvu d'un commutateur dit «semi-automatique à stations multiples», composé de quatre boutons poussoirs solidaires (un par entrée). Une fois l'une des entrées sélectionnée, les autres se désactivent automatiquement. L'appareil sert à sélectionner, à l'aide de l'un des boutons poussoirs, une entrée HDMI afin de la relier à la sortie HDMI. Sa fonction est de sélectionner des signaux HDMI provenant de différentes sources (lecteur DVD, décodeur numérique, etc.) afin de les relier à un appareil (un téléviseur par exemple).

    Motifs

    Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée et par le libellé des codes NC 8536 , 8536 50 et 8536 50 80 . Étant donné que l'appareil n'est pourvu que d'un commutateur permettant de relier la sortie à une seule entrée à la fois, il ne s'agit pas d'un panneau destiné à la distribution électrique. Un classement dans la position 8537 en tant que tableau, panneau, console, pupitre, armoire ou autre support, comportant plusieurs appareils relevant des positions 8535 ou 8536 , pour la distribution électrique est par conséquent exclu. Étant donné que l'appareil n'assure que la fonction de commutateur, qui correspond à une fonction électrique spécifique identifiée dans une des positions du chapitre 85, il doit être classé sous le code NC 8536 50 80 en tant qu'autre commutateur.

  • 8536 69 90 17 déc. 2018 · Règlement sur EUR-Lex
    Connecteurs pour câbles (type «mâle» ou «femelle») pour une tension n'excédant pas 1 000 V, en cuivre.

    L'article présente une fiche (connecteur «mâle») ou une prise (connecteur «femelle») d'un côté et, de l'autre côté, un dispositif de contact sous la forme d'une pince protégée par une couche de matériau isolant. L'article est utilisé pour raccorder des fils ou des câbles autres que des câbles coaxiaux. L'article permet la connexion par emboîtement du connecteur «mâle» dans le connecteur «femelle» sans utiliser d'outils. Voir l'illustration (*1)

    Motifs

    Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée et par le libellé des codes NC 8536 , 8536 69 et 8536 69 90 . L'article présente les caractéristiques objectives d'une fiche (connecteur «mâle») ou d'une prise (connecteur «femelle») équipée d'un autre dispositif de contact (voir également les notes explicatives du système harmonisé relatives à la position 8536 , section III, lettre A), point 1, et les notes explicatives de la nomenclature combinée relatives aux sous-positions 8536 69 10 à 8536 69 90 ). Son classement dans les autres connexions et éléments de contact pour fils et câbles relevant de la sous-position 8536 90 10 est donc exclu. Il convient dès lors de le classer sous le code NC 8536 69 90 en tant qu'autres fiches et prises de courant.

  • 8536 70 00 3 juin 2019 · Règlement sur EUR-Lex
    Un article (dénommé «boîtier pour fibres optiques avec connecteurs») de forme cylindrique mesurant environ 140 mm de diamètre et 400 mm de hauteur. Le poids de l'article est d'environ 2,5 kg. Il est constitué essentiellement de plastique et de quelques petits éléments (crochets et vis) en métal.

    La base de l'article est fournie avec quatre points d'entrée pour câbles. Lorsque l'article est entièrement assemblé, la base est fixée au plastique cylindrique qui recouvre l'article par un fermoir rond détachable. À l'intérieur se trouve un plateau d'épissure en plastique, fixé sur la base de l'article. Ce plateau présente des rainures spécifiques pour aligner des fibres optiques/câbles optiques et est équipé de connecteurs. L'article dans son ensemble est destiné à la protection des fibres optiques/câbles optiques et peut être utilisé dans différents types de réseaux. (*1) Voir les images.

    Motifs

    Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée, la note 7 relative au chapitre 85, ainsi que le libellé des codes NC 8536 et 8536 70 00 . Le classement sous le code NC 8536 90 10 est exclu car ce code couvre les «Connexions et éléments de contact pour fils et câbles», à savoir des dispositifs électriques permettant d'effectuer des connexions électriques. L'article en question est un boîtier avec des connecteurs pour fibres optiques, faisceaux de fibres optiques ou câbles optiques, et ne comporte pas de connexions électriques. L'article présente les caractéristiques des connecteurs pour fibres optiques, faisceaux de fibres optiques ou câbles optiques qui servent simplement à aligner mécaniquement les fibres optiques bout-à-bout dans un système numérique à ligne (voir également les notes explicatives du système harmonisé relatives à la position 8536 , partie IV). Au vu de ses caractéristiques, l'article doit donc être classé sous le code NC 8536 70 00 , dans les connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques.

Renseignements tarifaires du Royaume-Uni pour 8536000000

Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.

  • UK 8536105090 Valable du 14 oct. 2025 au 13 oct. 2028 · Décision 600013912 sur GOV.UK

    20-piece set of mini electrical fuses designed for use in automobiles. The set is comprised of fuses in multiple sizes and colours as follows: 5A, 7.5A,10A,15A, 20A, 25A, 30A and 40A, and coloured orange, brown, red, blue, yellow, white, green and purple respectively. The fuses are packaged on a card and held in place under a plastic covering. The fuses meet or exceed OEM Specifications.

    Justification

    Legal justification Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables. GIR 3(b) - Has been used as the predominant number of fuses within the set have a current exceeding 10A but not 63A and so therefore is considered to be the essential character. …

  • UK 8536105090 Valable du 14 avr. 2026 au 13 avr. 2029 · Décision 600015384 sur GOV.UK

    A pack of 8 assorted cartridge fuses, intended for use in UK standard plugs to provide circuit protection. The pack contains: two x 3 amp fuses (250-750w) two x 5 amp fuses (750-1250w) four x 13 amp fuses (1250-3250w) Each fuse is marked with its current rating for identification. The fuses are suitable for appliances operating within the stated wattage ranges. All items in the pack comply with BS1362 requirements for plug fuses used in the UK.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR1 – has been used to classify this product by the terms of heading 8536 – Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1000v; connectors for optical fibres, optical fibre bundles or cables GIR3(c) - has been used as it is considered there is no essential character and the goods have therefore been classified to last in numerical order within the tariff GIR5(b) – has been used to identify …

  • UK 8536105090 Valable du 5 mai 2026 au 4 mai 2029 · Décision 600015402 sur GOV.UK

    20 piece vehicle fuse set. The fuses range from 5A to 30A. Each fuse is clearly marked and colour coordinated making them easy to use. Each fuse is approx. 2cm by 2cm. Packaged in a blister card Contents:- 2 x 5A 2 x 7.5A 4 x 10A 4 x 15A 4 x 20A 2 x 25A 2 x 30A

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables. GIR 3b has been used as there are 15 fuses with amperages varying from 5A to 30A, which are put up in a set for retail sale. The majority of the fuses in the set are over 10A. GIR 5b - has been used to …

+ 40 de plus
  • UK 8536411020 Valable du 21 déc. 2023 au 20 déc. 2026 · Décision 600009268 sur GOV.UK

    Subminiature Intermediate Power Relay which has a voltage that does not exceed 60 v and a current that does not exceed 2 a. The product is a photoelectric relay consisting of a gaalas light emitting diode, a galvanically generator and a power mosfet output switch in a casting with connections for a voltage of 60 volts or less and a current of 2 amps or less.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1000 v; connectors for optical fibres, optical fibre bundles or cables GIR 6 has been used to classify this product to subheading level 853641 - Relays; For a voltage not exceeding 60 v 8 Digit Code 85364110 - For a current not exceeding 2 a 10 digit code …

  • UK 8536500700 Valable du 11 sept. 2024 au 10 sept. 2027 · Décision 600011279 sur GOV.UK

    An intelligent manual call point, designed to operate a loop of intelligent fire detection devices. An alarm is initiated by pressing the re-settable element. The manual call point signals to the control and indicating equipment using an interrupt feature within a digital protocol. An alarm status is indicated through the rotation of the resettable element, displaying yellow and black indication bars and a solid red LED. The push button is a mechanical latch mechanism. Internally the call point uses a spring loaded microswitch, biased to the 'off normal' state in normal operation. When the latch is removed by pushing the button, the internal spring loading of the microswitch snaps it across to its 'normal' state. All contacts of the microswitch are electronically monitored. Once activated, the call point can be reset by inserting the reset key into the front facing LED. The call point is loop powered and operates at 17-35 V DC. Alarm current (at 24 v) 4Ma.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables. GIR 6 - Has been used to classify this product by the terms of heading 8536 50 - Other switches. Digit Code: 853650 07 - Electromechanical snap-action switches for a current not exceeding 11 a. Also Classified in Accordance with: General …

  • UK 8536500700 Valable du 7 avr. 2026 au 6 avr. 2029 · Décision 600015030 sur GOV.UK

    A D4B series limit switch designed for reliable position detection and safety applications in industrial environments. This switch features a top roller plunger actuator for consistent operation when contacted by moving machine parts and is equipped with 1 normally closed (NC) and 1 normally open (NO) snap-action contact. The switch has an M20 conduit entry and a robust metal housing suitable for demanding industrial conditions. It supports a rated current of up to 10 A (AC, resistive load), making it suitable for position monitoring and general control applications.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1,000 V; connectors for optical fibres, optical fibre bundles or cables GIR 6 - Has been used to classify the goods to sub-heading 8536 50 – Other switches 8 Digit Code: 85365007 – Electromechanical snap-action switches for a current not exceeding 11 a Also Classified in Accordance with: General Notes (A) (7) …

  • UK 8536501100 Valable du 29 janv. 2025 au 28 janv. 2028 · Décision 600012305 sur GOV.UK

    A electronic push button switch 'Cut out Switch' for silencing vehicle safety sounders when the sound would not be appropriate for instance late at night. The switch is operated by a push button and comes in two versions, one when the cut-out of the alarm occurs for a set period of time after the button is pushed, and one when the alarm is silenced until the button is pressed again. The override switch is pushed to disable the reverse alarm for approx 4 minutes, after this time has elapsed the alarm will operate normally until the button is re-pressed. The rated voltage of the switches is between 12-24 volts of direct current and rated current is at 300 milliamps or less. The durability and Standards CE marked and EMC approved. The switch is made of a PCB board fitted with components that is sealed in resin inside a plastic case to make it waterproof. The switch come packaged in a plastic bag complete with button to operate, warning sticker and fitting instructions.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables. GIR 5 (b) - has been used to identify the type of packaging - The switch come packaged in a plastic bag complete with button to operate, warning sticker and fitting instructions. GIR 6 - Has been used to classify the goods to subheading …

  • UK 8536501900 Valable du 31 janv. 2025 au 30 janv. 2028 · Décision 600012307 sur GOV.UK

    A Speed Trigger Switch which is used to turn on commercial vehicle safety equipment at a pre-determined speed. The item consists of a PCB mounted in a resin potted plastic case with a pre-wired connector fitted for connection to a vehicle speedometer feed and output to equipment to be powered. The unit is powered by a 9-32VDC feed and is capable of being programmed with any of 10 different trigger speeds. At the pre-determined speed, the switch can trigger equipment up to 1.2A/12-24VDC. Dimensions Size (WxHxD) 44 x 16 x 64mm. The unit is supplied in a sealed and labelled plastic bag for retail sale.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables GIR 5 (b) - has been used to identify the type of packaging - The unit is supplied in a sealed and labelled plastic bag for retail sale GIR 6 - Has been used to classify the goods to subheading level 8536 50 - Other switches Digit Code: …

  • UK 8536501900 Valable du 3 févr. 2025 au 2 févr. 2028 · Décision 600012308 sur GOV.UK

    A Camera switching module for commercial vehicles. The device is a camera switching module that allows either one of two camera inputs to be fed to a monitor depending on if a 12-24VDC signal is received by the trigger wire. The item consists of a PCB mounted in a resin potted plastic case and is supplied in two different forms depending on what connectors are fitted to the unit. The unit operates on a 12VDC feed obtained from the monitor input. The unit is supplied in a sealed and labelled plastic bag for retail sale.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables GIR 5 (b) - has been used to identify the type of packaging - The unit is supplied in a sealed and labelled plastic bag for retail sale GIR 6 - Has been used to classify the goods to subheading level 8536 50 - Other switches Digit Code: …

  • UK 8536501900 Valable du 6 févr. 2025 au 5 févr. 2028 · Décision 600012310 sur GOV.UK

    The kit has 2 contain sensors and 1 motion sensor The contact sensors have magnets, which are attached to a door/window, when opened and the magnetic contact is broken this will trigger the device to send a alert to your mobile phone. The motion sensor will only detect movement and would also send alert to the mobile phone making user aware Boxed cardboard packaging and self installed They are made from plastic and circuit board and contain lithium batteries. 2XAA 1.5V - 3V DC (Direct Current)

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 8536 - electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 8536 50 - other switches 8 Code 853650 19 - other, for a voltage not exceeding …

  • UK 8536501900 Valable du 30 janv. 2025 au 29 janv. 2028 · Décision 600012311 sur GOV.UK

    Auxiliary Panel, a system sub-assembly for an underwater Telephone. It enables specific transducers to be switched on/off when transmitting and receiving with the underwater telephone. The panel is made from an aluminium front plate with switches, relays and indicator lamps attached. The front plate mounts onto a rack with the rest of the underwater telephone transmitting/receiving equipment and connects electrically via terminal blocks. The transducers convert electrical signals into pressure waves and vice versa in a similar manner to a microphone or speaker but specifically designed for the underwater environment. The panel has two simple switches that turn the circuits for the transducers on/off with lamps that indicate the associated status. They operate at 24V.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables GIR 6 has been used to classify the goods to subheading level 8536 50 - Other switches 8 digit code 85365019 - Other; For a voltage not exceeding 60 v: Other than push-button or rotary switches Also …

  • UK 8536501900 Valable du 30 janv. 2025 au 29 janv. 2028 · Décision 600012312 sur GOV.UK

    safety depth switch A safety depth switch is for an underwater telephone onboard a submarine. The safety depth switch is made from multiple components, including: cast aluminium housing, internal brass pressure switch, terminal blocks and wiring. The product switches the underwater telephone on/off when the submarine is at a set depth. The Safety Depth Switch is mounted in a part of the submarine that free-floods with sea water. An opening on the side of the case allows the seawater to exert a force on the internal pressure switch. As the submarine dives, the pressure increases and at a set depth the internal pressure switch will activate and turn on the circuit for the underwater telephone. The safety depth switch operates with a voltage of 24V. It is normally transported in it’s own wooden crate.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables GIR 5b has been used to identify the type of packaging. Individual wooden crate GIR 6 has been used to classify the goods to subheading level 8536 50 - Other switches 8 digit code 85365019 - Other; …

  • UK 8536501900 Valable du 19 mai 2026 au 18 mai 2029 · Décision 600015220 sur GOV.UK

    An Infrared microwave sensor for an outdoor solar light. It is used to detect motion which in turn will trigger lights only when needed. This will improve energy efficiency. The voltage is 3 - 16V. This item is imported as a separate component to be assembled at a later date. Packaged in a carton box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables GIR 5(b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 853650 - Other switches 8 Digit Code 85365019 - other than for a voltage not exceeding 60v - other than push-button or …

  • UK 8536508000 Valable du 12 févr. 2025 au 11 févr. 2028 · Décision 600012376 sur GOV.UK

    Waveguide Switch is a hollow metallic structure that guide electromagnetic waves, at a lower loss at high frequencies compared to coaxial cables. Waveguide switches are integral components in waveguide systems used to control the direction of electromagnetic waves or to selectively connect or disconnect different waveguide paths. Whether through mechanical, electrical, or optical means, waveguide switches help provide flexible, efficient signal routing in high-frequency systems. Within the application of satellite communications, the antenna ground segment is responsible for controlling the communication links, routing signals between different subsystems, and ensuring that the signals are directed to the correct equipment at the right time. The switch is positioned between two sections of a waveguide or at the intersection of multiple waveguide branches. Depending on the design, the waveguide might need to be modified to include a port or actuator for the switch. They are designed to handle high-frequency, high-power signals with low loss where coaxial switches are used in more general, lower-frequency applications and are easier to implement. For satellite communications, where weak signals may need to travel vast distances, having minimal signal loss as it passes through switches ensures the system works effectively even in low-signal conditions. The switching voltage is from 24V DC to Max voltage of 480V.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1,000 V; connectors for optical fibres, optical fibre bundles or cables GIR 6 - Has been used to classify the goods to sub-heading 8536 50 – Other switches Digit Code: 853650 80 – Other than for a voltage not exceeding 60v Also Classified in Accordance with: Harmonized …

  • UK 8536508000 Valable du 10 sept. 2026 au 9 sept. 2029 · Décision 600016015 sur GOV.UK

    This product is an electromechanical, latching coaxial RF/microwave switch designed solely to route RF signals between alternative RF paths. It operates from +22 to +32 VDC, has SMA female RF connectors and covers the 10.0–15.0 GHz frequency range. It does not contain active RF signal-processing components. The position-indication contacts are Form-C contacts used to indicate the selected switch position/RF path and do not perform RF signal processing. The unit is the sealed version with metric mounting threads.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1,000 V; connectors for optical fibres, optical fibre bundles or cables GIR 6 - Has been used to classify the goods to sub-heading 8536 50 – Other switches Digit Code: 853650 80 – Other than for a voltage not exceeding 60v Also Classified in Accordance with: Harmonized …

  • UK 8536699099 Valable du 23 janv. 2024 au 22 janv. 2027 · Décision 600009391 sur GOV.UK

    Product is a UK 2 pin adapter plug, the plug is used to connect a 2-pin electrical item to a 3-pin electrical socket. The item commonly known as a ‘shaver adaptor’ is fitted with 1 amp fuse and it used with shavers and toothbrushes. The plug conforms to British Standards and is packaged in a cardboard sleeve.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1,000 v; connectors for optical fibres, optical fibre bundles or cables GIR 5 (b) has been used to identify normal packaging for transport- cardboard sleeve GIR 6 has been used to classify the goods to sub-heading 8536 69 – Lamp holders, plugs and sockets; other than lamp …

  • UK 8536699099 Valable du 19 janv. 2024 au 18 janv. 2027 · Décision 600009392 sur GOV.UK

    A UK 2 pin adaptor plug. One side of the plug contains two holes, and the other side contains 3 pins. The 250V AC plug is used to connect a 2-pin electrical item to a 3-pin electric socket. The item commonly known as a ‘shaver adaptor’ is fitted with 1 amp fuse and it used with shavers and toothbrushes. The plug conforms to British Standards and is packaged in a card box containing 20 white coloured adaptors.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of Heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables. GIR 5b has been used to identify the type of packaging 20 plugs per cardboard box. GIR 6 has been used to classify the goods to subheading level - 853669 Lamp holders, plugs and sockets; other than lamp …

  • UK 8536699099 Valable du 19 janv. 2024 au 18 janv. 2027 · Décision 600009393 sur GOV.UK

    A 2 way adaptor plug. The 250V AC adaptor plug is used to convert one (wall) socket into two or more sockets allowing additional electrical devices to be plugged into the power source/wall socket. This is a square 3-pin plug with socket openings, fitted with a 13 amp fuse. Conforms to British Standards and comes packed in quantities of 10 per cardboard box.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of Heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables. GIR 5b has been used to identify the type of packaging 20 plugs per cardboard box. GIR 6 has been used to classify the goods to subheading level - 853669 Lamp holders, plugs and sockets; other than lamp …

  • UK 8536699099 Valable du 3 janv. 2024 au 2 janv. 2027 · Décision 600009394 sur GOV.UK

    A pack of 10 2-way mains socket adaptors. Each one comprises cube-shaped block, featuring 2 standard UK mains sockets. combined with a standard 3-pin UK mains plug. They function by splitting a single supply into 2 individual supplies – one for each socket, allowing up to 2 separate mains powered devices to be plugged into it. The units are each fitted with a 13 amp fuse and designed for home or office use, to be plugged into a 240v supply, the sockets are not switched and there is no cable between the mains plug and the sockets. Items are put up in a cardboard box for packaging , approximate weight per unit is 100 grams

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1,000 v; connectors for optical fibres, optical fibre bundles or cables GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 8536 69 – Lamp holders, plugs and sockets; other than lamp holders Code to 8 digits …

  • UK 8536699099 Valable du 3 janv. 2024 au 2 janv. 2027 · Décision 600009395 sur GOV.UK

    A 3-gang mains socket adaptor. It comprises 3 standard UK mains outlet sockets which are connected to a standard UK household mains plug which can be plugged into any UK electrical supply, all in a single housing. It functions by splitting a single supply into 3 individual supplies – one for each socket, allowing up to 3 separate mains powered devices to be plugged into it. The plug is fitted with a 13 amp fuse. The unit is designed for home or office use, to be plugged into a 240v supply, the sockets are not switched and there is no cable between the mains plug and the sockets. Item is put up in a cardboard sleeve for packaging

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1,000 v; connectors for optical fibres, optical fibre bundles or cables GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 8536 69 – Lamp holders, plugs and sockets; other than lamp holders Code to 8 digits …

  • UK 8536699099 Valable du 4 janv. 2024 au 3 janv. 2027 · Décision 600009396 sur GOV.UK

    A 13 Amp 3 pin fused plug used for electrical connection to other equipment. It has a voltage of 250 v and conforms to British Standards. The plugs are packaged in quantities of 20 to a box.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of Heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables GIR 5b has been used to identify the type of packaging - 20 plugs per cardboard box GIR 6 has been used to classify the goods to subheading level 853669 - Lamp holders, plugs and sockets; Other than lamp …

  • UK 8536699099 Valable du 11 juin 2024 au 10 juin 2027 · Décision 600010616 sur GOV.UK

    Access point for a smoke detector tester system. This is an XLR connection that is designed to be fitted in a location that is easily accessible by the user. It is connected to a smoke alarm tester which is fitted adjacent to the smoke alarm, these may situated in hard to reach locations such as a lift shaft or a location at height, that would otherwise require special access or equipment. The user can plug a device into the access point to remotely activate the tester to set the alarm off without having to gain physical access to it. They can then receive the report from the tester via the access point once the test is complete. Manufactured in-house using plastic, mild steel and electronic components. Each access point is packaged as a single unit in a cardboard carton

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8536 – Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1,000 V; connectors for optical fibres, optical fibre bundles or cables GIR 5 (b) has been used to identify normal packaging for transport – cardboard carton GIR 6 has been used to classify the goods to sub-heading 853669 – Other than lamp holders Code to 8 digits - 85366990 – …

  • UK 8536699099 Valable du 7 oct. 2024 au 6 oct. 2027 · Décision 600011512 sur GOV.UK

    These products are various models of 12V Electrical Vehicle Connectors which are used to allow the connection of a towing vehicle's electrical power supply to a towed vehicle, to enable lighting and other functions. The Connectors are 7, 8 or 13 pole, with brass or nickel plated terminals and either injection-moulded plastic or die-cast aluminium outer casings. Manufacture is according to ISO11446, ISO3732 or ISO1724. Packaging on import is in bulk outer cartons, or as part of an electrical assembly, such as a trailer wiring loom.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables GIR 5 (b) - has been used to identify the type of packaging. In bulk outer cartons, or as part of an electrical assembly, such as a trailer wiring loom. GIR 6 has been used to classify this …

  • UK 8536699099 Valable du 5 déc. 2024 au 4 déc. 2027 · Décision 600011962 sur GOV.UK

    USB Type C to USB Type A Adaptor. The USB-C-USB adapter is compatible with any laptop/tablet/smartphone with a USB Type-C port. Interface: USB Type-C to A / USB A Female to USB Type-C Male Dimension (WxHxD): 20.2x29.5x11.4 mm Weight: 4.71 g Compatibility: Universal / All Device that support USB Type C and USB A. Material: Plastic Outer shell. Packed in a clear plastic bag

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the product to subheading level 853669 - Lamp holders, plugs and sockets; other than lamp holders Eight Digit Code - …

  • UK 8536699099 Valable du 4 déc. 2024 au 3 déc. 2027 · Décision 600011963 sur GOV.UK

    This USB to Micro adaptor allows you to connect your USB device (mouse, keyboard or memory card reader) to your phone. Technical data: - Adaptor with USB-A pin to Micro-USB plug - For connecting peripherals to the smartphone such as mouse and keyboards - Transfer data from iOS, Android or Windows devices that support OTG - Data transfer. - Compatible with all devices with micro-USB connector that support USB OTG Type: USB OTG Adaptor Number of Ports: 1 Connectivity: USB Type A 2.0 (female port), Micro B USB (male connector) Material: Plastic outer shell.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables GIR 6 has been used to classify the product to subheading level 853669 - Lamp holders, plugs and sockets; other than lamp holders Eight Digit Code - 85366990 - Other than for coaxial cables or for printed circuits …

  • UK 8536699099 Valable du 4 déc. 2024 au 3 déc. 2027 · Décision 600011965 sur GOV.UK

    A 13A double gang switched plastic socket outlet with twin USB, intended to make an electrical connection to other equipment. This is for a voltage of 250 v and the plate dimensions are 146mm (W) x 86mm (H) x 9.5mm (D) Made of plastic

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables GIR 6 has been used to classify the product to subheading level 853669 - Lamp holders, plugs and sockets; other than lamp holders Eight Digit Code - 85366990 - Other than for coaxial cables or for printed circuits …

  • UK 8536699099 Valable du 20 janv. 2025 au 19 janv. 2028 · Décision 600012155 sur GOV.UK

    A 13A double gang switched plastic socket outlet with twin USB, intended to make an electrical connection to other equipment. This is for a voltage of 250 v and the plate dimensions are 146mm (W) x 86mm (H) x 9.5mm (D) Made of plastic

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables GIR 6 has been used to classify the product to subheading level 853669 - Lamp holders, plugs and sockets; other than lamp holders Eight Digit Code - 85366990 - Other than for coaxial cables or for printed circuits …

  • UK 8536699099 Valable du 27 févr. 2025 au 26 févr. 2028 · Décision 600012161 sur GOV.UK

    The USB to micro adaptor is used for connecting USB devices (mouse or keyboard) with smartphone. Compatible with all devices with micro-USB connector that support USB OTG Type: USB OTG Adaptor Number of Ports: 1 Connectivity: USB Type A 2.0 (female port), Micro B USB (male connector) Material: Plastic outer shell and packaged in a clear bag.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables. GIR 5 (b) has been used to identify the type of packaging- clear plastic bag. GIR 6 has been used to classify the product to subheading level 853669 - Lamp holders, plugs and sockets; other than lamp holders. 8 …

  • UK 8536699099 Valable du 28 févr. 2025 au 27 févr. 2028 · Décision 600012162 sur GOV.UK

    The product is a USB-C to USB-A adapter, USB-A is female, and USB-C is male. This is universal and compatible with all devices with a micro-USB connector for laptop/tablet and smartphone with type C port. Material is plastic outer shell and then packaged into a clear plastic bag.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables. GIR 5 (b) has been used to identify the type of packaging- clear plastic bag. GIR 6 has been used to classify the product to subheading level 853669 - Lamp holders, plugs and sockets; other than lamp holders. 8 …

  • UK 8536699099 Valable du 16 juin 2025 au 15 juin 2028 · Décision 600013293 sur GOV.UK

    Standard telephone master socket measuring 25(W) x 50(H) x 20.2(D) mm. It is made mainly from plastic and metal comprising a 6 pin socket mounted onto a PCB with other discrete components and a pair of 3 pin connectors. Designed for handling voltages below 1,000v.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables GIR 6 has been used to classify the goods to sub-heading 8536 69 – Other than lamp holders Code to 8 digits - 8536 6990 – Other than for coaxial cables; other than for printed circuits Code to 10 digits - …

  • UK 8536699099 Valable du 5 août 2025 au 4 août 2028 · Décision 600013453 sur GOV.UK

    A coupler is used in IT networks to extend an RJ45 Cat5e cable, i.e. the coupler is used to join two RJ45 Cat5e cables together to make a longer length. The coupler has two female RJ45 ports encased in a small ABS plastic box. It has 8 x gold plated connector contacts (RJ45) in each of the female ports. It is a simple design, ideal for quick network cable extensions. The coupler is Cat5e compliant ensuring compatibility and optimal performance with Cat5e network cables. Cat5e inline couplers help with connection when you need to link several networking cables together or need to extend cable runs without performance degradation. RJ45 feed through coupler is designed for computer networking, voice and data applications. Packaged individually (1 unit per pack) (currently polyethylene plastic bag but changing to paper this year Individual packaged size - 12 x 2 x 20cm Item size - 3.8 x 2.0 x 2.5cm Individual packaged weight - 10g Outer box quantity - 500 Outer box size - 42 x 20 x 39cm Outer box gross weight - 5kg Outer box net weight - 3.9kg

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify the product to heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables. GIR 5b - Has been used to identify the type of packaging - Packaged individually (1 unit per pack) (currently polyethylene plastic bag but changing to paper. GIR 6 - Has been used to classify the product to …

  • UK 8536699099 Valable du 16 déc. 2025 au 15 déc. 2028 · Décision 600014662 sur GOV.UK

    UK to USA 250V AC Electrical Travel adaptor plug To enable UK electrical devices to be connected to electrical outlets, in the USA The adaptor works by changing the shape of the UK physical plug to match the outlet, which creates a continuous electrical path from the outlet to the device Confirms to BS8546 Packaged on printed card with a transparent moulded disposable blister cover

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR1 – has been used to classify this product by the terms of heading 8536 – Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1000v; connectors for optical fibres, optical fibre bundles or cables. GIR5(b) – has been used to identify the type of packaging - Packaged on printed card with a transparent moulded disposable blister cover. GIR6 – has been used to classify the goods to subheading 853669 – …

  • UK 8536699099 Valable du 12 déc. 2025 au 11 déc. 2028 · Décision 600014663 sur GOV.UK

    A 13 AMP – 250V AC travel adaptor. Allows a standard 13 amp UK plug to be connected to electrical outlets in Europe and Mediterranean countries. Intended for use with one appliance or UK plug at a time. Conforms to BS8546. Packaged ready for retail sale in a blister pack

    Justification

    Legal justification Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables GIR 5 (b) - Has been used to identify the type of packaging. Blister packaging ready for retail sale GIR 6 - Has been used to classify the goods to subheading level 853669 Lamp …

  • UK 8536699099 Valable du 16 déc. 2025 au 15 déc. 2028 · Décision 600014664 sur GOV.UK

    250V AC Electrical tourist adaptor plug, with a 13 amp fuse. To enable electrical devices from outside of the UK to be connected to electrical outlets, within the UK. The adaptor works by changing the shape of the physical plug to match the outlet, which creates a continuous electrical path from the outlet to the device. Confirms to BS8546. Packaged on printed card with a transparent moulded disposable blister cover

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR1 – has been used to classify this product by the terms of heading 8536 – Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1000v; connectors for optical fuses, optical fibre bundles or cables. GIR5(b) – has been used to identify the type of packaging - Packaged on printed card with a transparent moulded disposable blister cover. GIR6 – has been used to classify the goods to subheading 853669 – …

  • UK 8536901000 Valable du 13 mars 2024 au 12 mars 2027 · Décision 600010074 sur GOV.UK

    This Terminal block is specially developed for the SE16 high-voltage battery and is used here in series production (G08). It is made from Aluminium - Material: Aluminium Alloy ALMGSi Type A. It works by terminating a single wire & connecting it to a circuit or other system. It is packaged in a plastic bag with 10 parts per foam sheet. This is then packaged further in a cardboard box.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables. GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 853690 - Other apparatus Eight digit code 85369010 - Connections and contact …

  • UK 8536901000 Valable du 17 juin 2025 au 16 juin 2028 · Décision 600013297 sur GOV.UK

    Cat-6 module. This product is a RJ45 Cat-6 socket module with Insulation Displacement Connection termination. Made of polycarbonate and brass, Dimensions of 25mm x 50mm x 20.2mm. For a voltage not exceeding 1000V. Use with Coaxial cables.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIRs) GIR 1 has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables GIR 6 has been used to classify the goods to sub-heading 8536 90 – Other apparatus 8 digit code 85369040 - Connections and contact elements for wire and cables Also classified in accordance with: …

  • UK 8536901000 Valable du 13 mai 2026 au 12 mai 2029 · Décision 600015548 sur GOV.UK

    The Cab Box Pack is an electrical junction and connection box used in conjunction with the companies sensor system. It provides a secure enclosure for terminating and distributing low-voltage electrical connections (not exceeding 1,000V) between the sensor and associated cabling. In larger Material Handling Equipment (MHE), it also supports in-cab alert functionality, enabling signals generated by the sensor system to be transmitted through connected wiring to provide visual or audible alerts to the operator cabin. It does not process or generate alerts itself, but serves as the protected electrical interface enabling those alert signals to be delivered. The Cab Box Pack operates as a passive electrical interface. It does not contain processing electronics or perform computation. Its functions include: Providing a protected point for electrical cable termination and distribution Maintaining insulation and separation between electrical conductors protecting connections from dust, moisture, and mechanical damage enabling transmission of sensor-generated signals to connected systems, including in-cab alert devices in larger MHE applications It serves as the physical and electrical link that allows alert signals from the sensor system to be carried safely to operator warning systems. The junction box is constructed from durable industrial materials, typically including: UV-stabilised ABS or polycarbonate housing (or powder-coated metal enclosure depending on variant) Rubber or silicone gaskets for environmental sealing Brass or copper alloy terminal blocks for electrical connectivity Stainless steel or zinc-coated fasteners and mounting hardware These materials are selected for strength, corrosion resistance, and suitability for outdoor or industrial environments. The enclosure is manufactured using injection moulding (for plastic versions) or sheet metal forming followed by powder coating (for metal versions). Electrical terminals are produced through precision metal stamping and machining processes. The unit is then assembled by integrating the housing, sealing components, and internal terminal systems under controlled production conditions to ensure durability and electrical safety compliance. The product is supplied as a single assembled unit, packaged for protection during transport and storage: Individually boxed in a rigid cardboard carton Outer labelling includes product name, part number for bulk shipments, multiple units are packed into reinforced master cartons on pallets.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1- Has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables. GIR 5b - Has been used to identify the type of packaging - Individually boxed in a rigid cardboard carton Outer labelling includes product name, part number for bulk shipments, multiple units are packed into reinforced master cartons on …

  • UK 8536909500 Valable du 17 févr. 2025 au 16 févr. 2028 · Décision 600012252 sur GOV.UK

    This product is a hand applied probe used for measuring semiconductor samples such as silicon wafers, implanted wafers, flat panels, semiconducting films etc.. The unit comprises a brass weighted Polytetrafluoroethylene (PFTE) holder for a four point probe, allowing four needles to make electrical contact with a measured sample. The probe is generally used in research applications, to introduce a constant current to the test materials and measure the resultant voltage drop. This enables the resistance or resistivity of the material to be determined. Connection is made to an external current source and voltmeter by means of insulated lead.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 8536 -Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables GIR 6 has been used to classify the goods to subheading level 853690 - Other apparatus Eight digit code 85369095 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) Note (III)(B) …

  • UK 8536909500 Valable du 17 févr. 2025 au 16 févr. 2028 · Décision 600012285 sur GOV.UK

    This product is a probe that is a mechanism where a piece of semiconductor material or semiconductor wafer can be positioned by a micrometre controlled coordinated stage, that has a rotary table and optional vacuum retention. The sample is contacted by four electrically isolated needles located within an electrically isolated guidance unit. The load on each needle is set by individual tension gauges. The needle contacts are used to pass a current through the object material, and to measure the subsequent voltage drop enabling the resistivity or resistance of the material to be calculated.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 8536 -Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables GIR 6 has been used to classify the goods to subheading level 853690 - Other apparatus Eight digit code 85369095 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) Note (III)(B) …

  • UK 8536909500 Valable du 11 févr. 2025 au 10 févr. 2028 · Décision 600012306 sur GOV.UK

    A Rain Blower Controller forms part of a antenna subsystem called the de-ice system, this is used to prevent condensation forming on the antenna feed window, by the rain blower passing a jet of air across its surface when rain is sensed. The rack mounted controller is connected to rain sensors which identify when the antenna is wet and the controllers function is to then activate the rain blower to clear moisture from the antenna The rain blower controller can control up to 3 antennas via 3 selector switches, providing local manual control and works independently from this control panel, as such if it is removed from the system there is no operational impact.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading- 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables GIR 6 has been used to classify the goods to subheading level 853690 - Other apparatus 8-digit code: 85369095- Other than elsewhere specified Also classified in accordance with: WCO opinion to …

  • UK 8536909500 Valable du 11 févr. 2025 au 10 févr. 2028 · Décision 600012309 sur GOV.UK

    The indoor rack-mount discrete Input/output gathering device is used to connect devices with separate interfaces to the monitor and control system. Separate interfaces could be equipment like alarms, fan/thermostat feedback, door contact status etc. In some configurations the unit can be used to activate relays or contactors to action certain processes for example like turning on a fan. The Antenna Monitor and Control subsystem can then employ customised logical routines based on the inputs and outputs – for example turning on a fan when a certain temperature is reached.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading- 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables GIR 6 has been used to classify the goods to subheading level 853690 - Other apparatus 8-digit code: 85369095- Other than elsewhere specified Also classified in accordance with: WCO opinion to …

  • UK 8536909500 Valable du 12 sept. 2025 au 11 sept. 2028 · Décision 600013532 sur GOV.UK

    The Acoustic Link control unit (ALCU) is part the Sonar 2008 which is an underwater telephone fitted to both surface and submarine. It provides simplex communication between vessels. It allows accessories such as headphones to be connected to unit and all control switches and indicators are mounted on the front panel. The ALCU enables the facility required to be selected i.e. passive or speech and the selection of the required transducer i.e. port, starboard, ahead, omni or narrow beam. The item is made from multiple components including, stainless steel housing, stainless steel fixings (screws, washers etc), transformers, printed circuit boards, lamps, wiring and electrical connectors. The product is packaged in special packaging

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading- 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables GIR 5b has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 853690 - Other apparatus 8-digit code: 85369095- Other than elsewhere specified …

  • UK 8536909500 Valable du 14 oct. 2026 au 13 oct. 2029 · Décision 600016440 sur GOV.UK

    Camera grip with battery compartment. It is for use with a specific type of camera. It is essentially some battery contacts and circuitry within a carbon fibre housing ergonomically shaped to form a handle. The product has an anti-slip grip and a pull-out slot for two batteries to be inserted and is secured to the camera using its standard tripod mount and thread. Once inserted into the unit the batteries for this product will power the camera and can be charged using the cameras 12-volt DC connection.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8536 - Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 v; connectors for optical fibres, optical fibre bundles or cables GIR 3(b) has been used as the additional battery connection feature is considered to be the essential character. GIR 6 has been used to classify the goods to sub-heading 853690 – Other apparatus Code to 8 …

Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.

Restrictions et signalements pour 8536000000

  • Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XXI 8536

    Art. 3 decies, biens qui procurent des recettes importantes à la Russie

    Lire l’acte sur EUR-Lex
  • Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 8536

    Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie

    Lire l’acte sur EUR-Lex

À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.

TVA à l’importation dans l’UE

  • Allemagne 19 %
  • Autriche 20 %
  • Belgique 21 %
  • Bulgarie 20 %
  • Chypre 19 % éventuellement 3 %
  • Croatie 25 %
  • Danemark 25 %
  • Espagne 21 %
  • Estonie 24 % éventuellement 9 %
  • Finlande 25,5 %
  • France 20 %
  • Grèce 24 %
  • Hongrie 27 %
  • Irlande 23 %
  • Italie 22 %
  • Lettonie 21 %
  • Lituanie 21 %
  • Luxembourg 17 %
  • Malte 18 %
  • Pays-Bas 21 %
  • Pologne 23 %
  • Portugal 23 %
  • Roumanie 21 %
  • Slovaquie 23 %
  • Slovénie 22 %
  • Suède 25 %
  • Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Les règles d’origine préférentielles de la sous-position 853600 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.

Règles d’origine sur Access2Markets

Informations

Lorsque vous importez ou exportez "Appareillage pour la coupure, le sectionnement, la protection, le branchement, le raccordement ou la connexion des circuits électriques (interrupteurs, commutateurs, relais, coupe-circuit, parasurtenseurs, fiches et prises de courant, douilles pour lampes et autres connecteurs, boîtes de jonction, par exemple), pour une tension n'excédant pas 1 000 V; connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques", il est important d'avoir le bon code SH ou code TARIC. Le code HS 8536000000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.

Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Appareillage pour la coupure, le sectionnement, la protection, le branchement, le raccordement ou la connexion des circuits électriques (interrupteurs, commutateurs, relais, coupe-circuit, parasurtenseurs, fiches et prises de courant, douilles pour lampes et autres connecteurs, boîtes de jonction, par exemple), pour une tension n'excédant pas 1 000 V; connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques", veuillez noter les points suivants :

  1. Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Appareillage pour la coupure, le sectionnement, la protection, le branchement, le raccordement ou la connexion des circuits électriques (interrupteurs, commutateurs, relais, coupe-circuit, parasurtenseurs, fiches et prises de courant, douilles pour lampes et autres connecteurs, boîtes de jonction, par exemple), pour une tension n'excédant pas 1 000 V; connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques".
  2. Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Appareillage pour la coupure, le sectionnement, la protection, le branchement, le raccordement ou la connexion des circuits électriques (interrupteurs, commutateurs, relais, coupe-circuit, parasurtenseurs, fiches et prises de courant, douilles pour lampes et autres connecteurs, boîtes de jonction, par exemple), pour une tension n'excédant pas 1 000 V; connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques" dans le pays de destination ou l'exporter depuis le pays d'origine.
  3. Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
  4. Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
  5. Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.

En résumé, le code HS-Code ou le code TARIC pour "Appareillage pour la coupure, le sectionnement, la protection, le branchement, le raccordement ou la connexion des circuits électriques (interrupteurs, commutateurs, relais, coupe-circuit, parasurtenseurs, fiches et prises de courant, douilles pour lampes et autres connecteurs, boîtes de jonction, par exemple), pour une tension n'excédant pas 1 000 V; connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques" est 8536000000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Appareillage pour la coupure, le sectionnement, la protection, le branchement, le raccordement ou la connexion des circuits électriques (interrupteurs, commutateurs, relais, coupe-circuit, parasurtenseurs, fiches et prises de courant, douilles pour lampes et autres connecteurs, boîtes de jonction, par exemple), pour une tension n'excédant pas 1 000 V; connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques".

Structure du HS-Code

85
Chapitre
36
Titre
00
Sous-titre
00
CN sous-titre
00
TARIC sous-titre
80
Codes TARIC supplémentaires

1. Chapitre

Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 85 a été sélectionné pour machines, appareils et matériels électriques et leurs parties; appareils d'enregistrement ou de reproduction du son, appareils d'enregistrement ou de reproduction des images et du son en télévision, et parties et accessoires de ces appareils

2. Titre

Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 36 se réfère à Appareillage pour la coupure, le sectionnement, la protection, le branchement, le raccordement ou la connexion des circuits électriques (interrupteurs, commutateurs, relais, coupe-circuit, parasurtenseurs, fiches et prises de courant, douilles pour lampes et autres connecteurs, boîtes de jonction, par exemple), pour une tension n'excédant pas 1 000 V; connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques.

Arborescence HS-Code

8500000000 80

Chapitre MACHINES, APPAREILS ET MATÉRIELS ÉLECTRIQUES ET LEURS PARTIES; APPAREILS D'ENREGISTREMENT OU DE REPRODUCTION DU SON, APPAREILS D'ENREGISTREMENT OU DE REPRODUCTION DES IMAGES ET DU SON EN TÉLÉVISION, ET PARTIES ET ACCESSOIRES DE CES APPAREILS

8536000000 80

Appareillage pour la coupure, le sectionnement, la protection, le branchement, le raccordement ou la connexion des circuits électriques (interrupteurs, commutateurs, relais, coupe-circuit, parasurtenseurs, fiches et prises de courant, douilles pour lampes et autres connecteurs, boîtes de jonction, par exemple), pour une tension n'excédant pas 1 000 V; connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques

8536100000 80

- Fusibles et coupe-circuit à fusibles

8536101000 80

- - pour une intensité n'excédant pas 10 A

8536101010 80

- - - destinés à certains types de véhicules aériens

8536101090 80

- - - autres

8536105000 80

- - pour une intensité excédant 10 A mais n'excédant pas 63 A

8536105010 80

- - - destinés à certains types de véhicules aériens

8536105090 80

- - - autres

8536109000 80

- - pour une intensité excédant 63 A

8536109010 80

- - - destinés à certains types de véhicules aériens

8536109090 80

- - - autres

8536200000 80

- Disjoncteurs

8536201000 80

- - pour une intensité n'excédant pas 63 A

8536201010 80

- - - destinés à certains types de véhicules aériens

8536201090 80

- - - autres

8536209000 80

- - pour une intensité excédant 63 A

8536209010 80

- - - destinés à certains types de véhicules aériens

8536209090 80

- - - autres

8536300000 80

- autres appareils pour la protection des circuits électriques

8536301000 80

- - pour une intensité n'excédant pas 16 A

8536303000 80

- - pour une intensité excédant 16 A mais n'excédant pas 125 A

8536309000 80

- - pour une intensité excédant 125 A

8536410000 10

- Relais

8536410000 80

- - pour une tension n'excédant pas 60 V

8536411000 80

- - - pour une intensité n'excédant pas 2 A

8536411010 80

- - - - destinés à certains types de véhicules aériens

8536411020 80

- - - - Relais photoélectrique (relais photovoltaïque) composé d'une diode électroluminescente GaAIA, d'un circuit intégré récepteur galvaniquement isolé avec générateur photovoltaïque et un Mosfet de puissance (comme commutateur de sortie), dans un boîtier de connexion, pour une tension inférieure ou égale à 60 Volts et une intensité de courant inférieure ou égale à 2 ampères

8536411090 80

- - - - autres

8536419000 80

- - - pour une intensité excédant 2 A

8536419010 80

- - - - destinés à certains types de véhicules aériens

8536419040 10

- - - - autres

8536419040 80

- - - - - Relais de puissance présentant: -une fonction de commutation électromécanique et/ou électromagnétique, -un courant de charge de 3 A ou plus mais n'excédant pas 16 A, -une bobine de tension de 5 V ou plus mais n'excédant pas 24 V, et -dont la distance entre les broches de connecteur du circuit de charge n'excède pas 15,6 mm

8536419060 80

- - - - - Relais de puissance muni d'une fonction permettant de connecter ou de déconnecter en toute sécurité le circuit de charge et/ou d'alimentation de batteries 48 V, placé dans un boîtier en plastique, comprenant:  -un capteur de courant 50 A/400 V, -un fusible de haute tension MILD 70 V/300 A, -avec ou sans câble de raccordement, destiné à la fabrication de batteries rechargeables pour véhicules hybrides et électriques

8536419089 80

- - - - - autre

8536490000 80

- - autres

8536490010 80

- - - destinés à certains types de véhicules aériens

8536490040 10

- - - autres

8536490040 80

- - - - Relais photoélectrique (ou relais photovoltaïque), composé de deux diodes émettrices de lumière GaAIA, deux récepteurs avec isolement galvanique avec générateur(s) photovoltaïque(s) et quatre transistors à effet de champ à grille métal-oxyde - MOFSET (comme commutateurs de sortie), dans un boîtier muni de connecteurs, pour une tension excédant 60 V

8536490060 80

- - - - Relais en forme de cube présentant : -une tension de fonctionnement de la bobine de 12 V ou plus en courant continu, mais n'excédant pas 24 V en courant continu, -une capacité de transport de courant de contact de 5 A ou plus, mais n'excédant pas 15 A, -une tension de contact de 80 V ou plus en courant alternatif mais n'excédant pas 270 V en courant alternatif, -des dimensions extérieures de 19 mm (± 0,4 mm) x 15,2 mm (± 0,4 mm) x 15,5 mm (± 0,4 mm), destiné à la fabrication de tableaux de commande pour appareils domestiques

8536490099 80

- - - - autres

8536500000 80

- autres interrupteurs, sectionneurs et commutateurs

8536500300 80

- - Interrupteurs électroniques à courant alternatif consistant en circuits d'entrée et de sortie à couplage optique (interrupteurs CA à thyristor isolé)

8536500500 80

- - Interrupteurs électroniques, y compris interrupteurs électroniques à protection thermique, composés d'un transistor et d'une puce logique (technologie chip-on-chip)

8536500700 80

- - Interrupteurs électromécaniques à action brusque pour un courant n'excédant pas 11 A

8536501100 20

- - autres

8536501100 30

- - - pour une tension n'excédant pas 60 V

8536501100 80

- - - - à touche ou à bouton

8536501500 80

- - - - rotatifs

8536501900 80

- - - - autres

8536508000 80

- - - autres

8536610000 10

- Douilles pour lampes, fiches et prises de courant

8536610000 80

- - Douilles pour lampes

8536611000 80

- - - Douilles Edison

8536611010 80

- - - - destinés à certains types de véhicules aériens

8536611090 80

- - - - autres

8536619000 80

- - - autres

8536619010 80

- - - - destinés à certains types de véhicules aériens

8536619090 80

- - - - autres

8536690000 80

- - autres

8536691000 80

- - - pour câbles coaxiaux

8536693000 80

- - - pour circuits imprimés

8536699000 80

- - - autres

8536699010 80

- - - - destinés à certains types de véhicules aériens

8536699082 10

- - - - autres

8536699082 80

- - - - - Prise ou fiche modulaire pour réseau local, combinée ou non à d'autres supports, intégrant au moins: - Un transformateur d'impulsions, comprenant un tore ferrite à bande passante étendue, - Une bobine mode commun, - Une résistance, - Un condensateur, entrant dans la fabrication de produits classés dans les positions 8521 ou 8528

8536699083 80

- - - - - Prise d'alimentation secteur (AC socket) munie d'un filtre antibruit et composée: - d'une prise d'alimentation secteur de 230 V (pour un câble d'alimentation), - d'un filtre antibruit intégré composé de condensateurs et de bobines selfs, - d'un connecteur de câble pour connecter la prise d'alimentation secteur au bloc d'alimentation d'un téléviseur à écran plasma, d'un support métallique pour l'adaptation de la prise d'alimentation secteur au téléviseur à écran plasma, ou sans support métallique

8536699085 80

- - - - - Prise ou fiche, intégrée dans un boîtier en matière plastique ou métallique, avec 96 broches au maximum, entrant dans la fabrication de produits classés dans les positions 8521 ou 8528

8536699086 80

- - - - - Prise ou fiche électrique de type interface multimédia haute définition (HDMI), intégrée dans un boîtier en matière plastique ou métallique, avec 19 ou 20 broches sur 2 rangées, entrant dans la fabrication de produits classés dans la position 8521 ou 8528

8536699099 80

- - - - - autres

8536700000 80

- Connecteurs pour fibres optiques, faisceaux ou câbles de fibres optiques

8536700010 80

- - Prise, fiche ou connecteur optique entrant dans la fabrication de produits classés dans les positions 8521 ou 8528

8536700093 10

- - autres

8536700093 80

- - - Connecteurs en plastique pour fibres optiques, faisceaux ou câbles de fibres optiques, destinés à certains types de véhicules aériens

8536700099 80

- - - autres

8536900000 80

- autres appareils

8536900100 80

- - Éléments préfabriqués pour canalisations électriques

8536901000 80

- - Connexions et éléments de contact pour fils et câbles

8536904000 80

- - Brides de batteries des types utilisés pour véhicules automobiles des n$o$s$ 8702, 8703, 8704 ou 8711

8536909500 80

- - autres