Nouveau Décrivez un produit, obtenez le code NC. Aussi en API et MCP pour les agents IA. Essai gratuit
Aller au contenu

Numéro tarifaire 9030000000 80 - Oscilloscopes, analyseurs de spectre et autres instruments et appareils pour la mesure ou le contrôle de grandeurs électriques; instruments et appareils pour la mesure ou la détection des radiations alpha, bêta, gamma, X, cosmiques ou autres radiations ionisantes

M’alerter par e-mail

Restrictions commerciales pour l'importation de marchandises pour 9030000000 80

Les droits d’autres codes avec un compte gratuit

Vous avez consulté les droits de 10 codes aujourd’hui. Créez un compte gratuit pour voir droits, mesures et historique de tous les codes.

Règles d’origine préférentielles pour 9030000000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

  • EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Îles Féroé, Liechtenstein, Norvège, Suisse

    EU-Egypt Association Agreement · Égypte

    EU-Georgia DCFTA · Géorgie

    EU-Iceland FTA · Islande

    EU-Jordan Association Agreement · Jordanie

    EU-Central America Association Agreement

    EU-Morocco Association Agreement · Maroc

    EU-Moldova DCFTA · Moldavie

    Pan-Euro-Mediterranean (PEM) Convention · Albanie, Andorre, Bosnie-Herzégovine, Égypte, Îles Féroé, Islande, Kosovo, Liechtenstein, Macédoine du Nord, Monténégro, Norvège, Palestine, Suisse, Turquie

    EU-Tunisia Association Agreement · Tunisie

    EU-Ukraine DCFTA · Ukraine

    Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionizing radiations / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chili

    EU-Algeria Association Agreement · Algérie

    EU-Lebanon Association Agreement · Liban

    Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiations / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EPA CARIFORUM

    EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

    EU-Israel Association Agreement · Israël

    EU-Mexico Global Agreement · Mexique

    Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading No 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiations / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie

    Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

    Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiations / or: Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this Chapter ; profile projectors / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EPA Pacific · Fidji, Îles Salomon, Papouasie-Nouvelle-Guinée, Samoa

    Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading No 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionizing radiations / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EU-Japan EPA · Japon

    CTH except from heading 96.20; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Korea FTA · Corée du Sud

    Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiations / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading No 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionizing radiations / or: Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product

  • EPA SADC · Afrique du Sud

    Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading No 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiations / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex–works price of the product

  • EU-Singapore FTA · Singapour

    Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product

  • EU-Viet Nam FTA · Viêt Nam

    Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: / or: Manufacture from materials of any heading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70% of the ex-works price of the product.

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 9030000000

9030 Notes explicatives de la nomenclature combinée: Oscilloscopes, analyseurs de spectre et autres instruments et appareils pour la mesure ou le contrôle de grandeurs électriques; instruments et appareils pour la mesure ou la détection des radiations alpha, bêta, gamma, X, cosmiques ou autres radiations ionisantes

Les instruments et appareils pour la mesure ou le contrôle de grandeurs électriques ou de grandeurs non électriques, reconnaissables comme servant principalement à la mesure ou au contrôle de grandeurs électriques, restent classés, en vertu de la règle générale 3 point b) pour l'interprétation de la nomenclature combinée, dans la présente position. C'est par exemple le cas des oscilloscopes et oscillographes cathodiques et des oscillographes à rayons lumineux ou à rayons ultraviolets (sous-position 9030 20 00) Sont toutefois exclus de la présente position les instruments et appareils dont le caractère essentiel ne peut pas être déterminé du fait qu'ils sont conçus indifféremment pour la mesure ou le contrôle de grandeurs électriques et de grandeurs non électriques. C'est ainsi que les appareils pour le contrôle des moteurs et de l'installation d'allumage de véhicules automobiles mesurant des grandeurs électriques (tension, résistance, par exemple) et des grandeurs non électriques (nombre de tours, angle de came, état de l'interrupteur, par exemple) relèvent, en application de la règle générale 3 point c) pour l'interprétation de la nomenclature combinée, du no 9031.

9030 20 00 Notes explicatives de la nomenclature combinée: Oscilloscopes et oscillographes

Relèvent de cette sous-position les oscillographes à rayons lumineux ou à rayons ultraviolets pour la mesure et l'enregistrement de grandeurs électriques qui varient rapidement. Ces appareils, également connus sous la dénomination enregistreurs à rayons lumineux ou ultraviolets ou oscillographes bifilaires enregistrent le phénomène périodique à étudier, à l'aide de rayons lumineux ou ultraviolets, sous forme de signaux de mesure sur papier photosensible.

9030 39 00 Notes explicatives de la nomenclature combinée: autres, avec dispositif enregistreur

Relèvent de cette sous-position les appareils ou systèmes électriques d'essai permettant d'établir, par mesure ou contrôle de grandeurs électriques (capacité, inductance, impédance, résistance, tension, par exemple), l'aptitude fonctionnelle des cartes de circuits imprimés ou d'autres composants électroniques et qui indiquent des défectuosités éventuelles (courts-circuits, interruptions, par exemple). Ces appareils ou systèmes consistent généralement en une partie de mesure ou de contrôle (munie de clavier d'introduction, de mémoire de programme et d'un appareil d'affichage de données) qui réalise la mesure, compare le résultat aux valeurs de consigne préalablement introduites et indique le résultat, une partie de commande (comportant une machine automatique de traitement de l'information ou des microprocesseurs), une imprimante reproduisant le résultat de l'essai et une trieuse qui classe les pièces examinées selon différentes valeurs réelles et sélectionne des pièces défectueuses. Ne relèvent toutefois pas de la présente sous-position les appareils pour contrôler si les boîtiers des composants électroniques sont fermés hermétiquement (no 9031).

9030 82 00 Notes explicatives de la nomenclature combinée: pour la mesure ou le contrôle des disques ou des dispositifs à semi-conducteur

Relèvent de cette sous-position les appareils ou systèmes électriques d'essai permettant d'établir, par mesure ou contrôle de grandeurs électriques (tension, fréquence, par exemple) l'aptitude fonctionnelle des disques (wafers), de microplaquettes ou d'autres dispositifs à semi-conducteur et qui indiquent des défectuosités éventuelles (écarts par rapport aux valeurs de consignes préétablies, interruptions, par exemple). Ces appareils ou systèmes consistent généralement en une partie de mesure ou de contrôle (munie de clavier d'introduction, de mémoire de programme et d'un appareil d'affichage de données) qui réalise la mesure, compare le résultat aux valeurs de consigne préalablement introduites et indique le résultat, une partie de commande (comportant une machine automatique de traitement de l'information ou des microprocesseurs), une imprimante reproduisant le résultat de l'essai et une trieuse qui classe les pièces examinées selon différentes valeurs réelles et sélectionne des pièces défectueuses. Ne relèvent toutefois pas de la présente sous-position les appareils pour contrôler si les boîtiers des circuits intégrés ou d'autres composants électroniques sont fermés hermétiquement (no 9031).

Notes du chapitre 90

Notes 1. Le présent chapitre ne comprend pas: a) les articles à usages techniques, en caoutchouc vulcanisé, non durci (no 4016), en cuir naturel ou reconstitué (no 4205), en matières textiles (no 5911); b) les ceintures et bandages en matières textiles, dont l'effet recherché sur l'organe à soutenir ou maintenir est uniquement fonction de l'élasticité (ceintures de grossesse, bandages thoraciques, bandages abdominaux, bandages pour les articulations ou les muscles, par exemple) (section XI); c) les produits réfractaires du no 6903; les articles pour usages chimiques ou autres usages techniques, du no 6909; d) les miroirs en verre, non travaillés optiquement, du no 7009 et les miroirs en métaux communs ou en métaux précieux, n'ayant pas le caractère d'éléments d'optique (no 8306 ou chapitre 71); e) les articles en verre des nos 7007, 7008, 7011, 7014, 7015 ou 7017; f) les parties et fournitures d’emploi général, au sens de la note 2 de la section XV, en métaux communs (section XV) et les articles similaires en matières plastiques (chapitre 39); relèvent toutefois du no 9021 les articles spécialement conçus pour être utilisés exclusivement comme implants pour la médecine, la chirurgie, l’art dentaire ou l’art vétérinaire. g) les pompes distributrices comportant un dispositif mesureur, du no 8413; les bascules et balances à vérifier et compter les pièces usinées, ainsi que les poids à peser présentés isolément (no 8423); les appareils de levage ou de manutention (nos 8425 à 8428); les coupeuses de tous types pour le travail du papier ou du carton (no 8441); les dispositifs spéciaux pour le réglage de la pièce à travailler ou de l'outil sur les machines-outils ou machines à découper par jet d’eau, même munis de dispositifs optiques de lecture (diviseurs dits «optiques», par exemple), du no 8466 (autres que les dispositifs purement optiques: lunettes de centrage, d'alignement, par exemple); les machines à calculer (no 8470); les détendeurs, vannes et autres articles de robinetterie (no 8481); machines et appareils du no 8486, y compris les appareils pour la projection ou la réalisation des tracés de circuits sur les surfaces sensibilisées des matériaux semi-conducteurs; h) les projecteurs d'éclairage des types utilisés pour cycles ou automobiles (no 8512); les lampes électriques portatives du no 8513; les appareils cinématographiques d'enregistrement ou de reproduction du son ainsi que les appareils pour la reproduction en série de supports de son (no 8519); les lecteurs de son (no 8522), les caméras de télévision, les appareils photographiques numériques et les caméscopes (no 8525); les appareils de radiodétection et de radiosondage, les appareils de radionavigation et les appareils de radiotélécommande (no 8526); les connecteurs de fibres optiques, faisceaux ou câbles de fibres optiques (no 8536); les appareils de commande numérique du no 8537; les articles dits «phares et projecteurs scellés» du no 8539; les câbles de fibres optiques du no 8544; ij) les projecteurs du no 9405; k) les articles du chapitre 95; l) les monopodes, les bipieds, les trépieds et articles similaires, du n° 9620; m) les mesures de capacité, qui sont classées avec les ouvrages de la matière constitutive; n) les bobines et supports similaires (classement d'après la matière constitutive: no 3923, section XV, par exemple). 2. Sous réserve des dispositions de la note 1 ci-dessus, les parties et accessoires pour machines, appareils, instruments ou articles du présent chapitre sont classés conformément aux règles ci-après: a) les parties et accessoires consistant en articles compris dans l'une quelconque des positions du présent chapitre ou des chapitres 84, 85 ou 91 (autres que les nos 8487, 8548 ou 9033) relèvent de ladite position quels que soient les machines, appareils ou instruments auxquels ils sont destinés; b) lorsqu'ils sont reconnaissables comme exclusivement ou principalement destinés à une machine, un instrument ou un appareil particuliers ou à plusieurs machines, instruments ou appareils d'une même position (même des nos 9010, 9013 ou 9031), les parties et accessoires, autres que ceux visés au paragraphe précédent, sont classés dans la position afférente à cette ou ces machines, instruments ou appareils; c) les autres parties et accessoires relèvent du no 9033. 3. Les dispositions des notes 3 et 4 de la section XVI s'appliquent également au présent chapitre. 4. Le no 9005 ne couvre pas les lunettes de visée pour armes, les périscopes pour sous-marins ou chars de combat ni les lunettes pour machines, appareils ou instruments du présent chapitre ou de la section XVI (no 9013). 5. Les machines, appareils et instruments optiques de mesure ou de contrôle, susceptibles de relever à la fois du no 9013 et du no 9031, sont classés dans cette dernière position. 6. Au sens du no 9021, on considère comme «articles et appareils orthopédiques» les articles et appareils servant: — soit à prévenir ou à corriger certaines difformités corporelles, — soit à soutenir ou à maintenir des parties du corps à la suite d'une maladie, d'une opération ou d'une blessure. Les articles et appareils orthopédiques comprennent les chaussures orthopédiques ainsi que les semelles intérieures spéciales, conçues en vue de corriger les affections orthopédiques du pied, pour autant qu'elles soient 1o) fabriquées sur mesure ou 2o) fabriquées en série, présentées par unités et non par paires et conçues pour s'adapter indifféremment à chaque pied. 7. Le no 9032 comprend uniquement: a) les instruments et appareils pour la régulation du débit, du niveau, de la pression ou d'autres caractéristiques des fluides gazeux ou liquides, ou pour le contrôle automatique des températures, même si leur fonctionnement a son principe dans un phénomène électrique variable avec le facteur recherché, et qui ont pour fonction d'amener ce facteur à une valeur prescrite et de l'y maintenir sans être influencés par d'éventuelles perturbations, grâce à une mesure continue ou périodique de sa valeur réelle; b) les régulateurs automatiques de grandeurs électriques, ainsi que les régulateurs automatiques d'autres grandeurs dont l'opération a son principe dans un phénomène électrique variable avec le facteur à régler, et qui ont pour fonction d'amener ce facteur à une valeur prescrite et de l'y maintenir sans être influencés par d'éventuelles perturbations, grâce à une mesure continue ou périodique de sa valeur réelle. Notes complémentaires 1. On entend par «électroniques», au sens des sous-positions 9015 30 10, 9025 80 40, 9026 10 21, 9026 10 29, 9026 20 20, 9026 80 20, 9027 10 10 et 9032 10 20, les instruments et appareils comportant un ou plusieurs articles relevant des nos 8540, 8541 ou 8542. Toutefois, ne sont pas pris en considération, pour l'application de cette disposition, les articles des nos 8540, 8541 ou 8542 ayant uniquement la fonction de redresseur de courant ou qui ne sont présents que dans la partie alimentation de ces instruments ou appareils. 2. Aux fins de la sous-position 9021 10 10, on entend par «articles et appareils d’orthopédie» les articles et appareils qui sont spécialement conçus pour une fonction orthopédique déterminée, par opposition aux produits qui pourraient être utilisés à des fins diverses (par exemple, les produits pour les articulations, ligaments ou tendons sursollicités par les activités sportives ou la dactylographie, ainsi que les produits qui servent uniquement à atténuer la douleur de la partie du corps déficiente ou infirme causée, par exemple, par une réaction inflammatoire). Les «articles et appareils d’orthopédie» doivent empêcher complètement un mouvement spécifique de la partie du corps déficiente ou infirme (par exemple, des articulations, ligaments ou tendons) afin de prévenir d’autres blessures ou difformités corporelles ou une aggravation de ces blessures ou difformités, à la différence d’autres produits qui ne peuvent pas empêcher des mouvements spécifiques, mais qui préviennent les mouvements réflexes (mouvements involontaires) en raison de leur rigidité relative due à la présence, par exemple, de gouttières souples, pelotes de compression, d’une matière textile non élastique ou de sangles de contention de type «velcro».

Notes de la section XVIII

INSTRUMENTS ET APPAREILS D'OPTIQUE, DE PHOTOGRAPHIE OU DE CINÉMATOGRAPHIE, DE MESURE, DE CONTRÔLE OU DE PRÉCISION; INSTRUMENTS ET APPAREILS MÉDICO-CHIRURGICAUX; HORLOGERIE; INSTRUMENTS DE MUSIQUE; PARTIES ET ACCESSOIRES DE CES INSTRUMENTS OU APPAREILS

Autres notes explicatives du chapitre

Note complémentaire 2 Voir également la note 6 du chapitre 90 et l’arrêt dans les affaires jointes C-260/00 à C-263/00, Lohmann GmbH & Co. KG et Medi Bayreuth Weihermüller & Voigtmann GmbH & Co. KG contre Oberfinanzdirektion Koblenz, points 36, 37, 39, 40, 43 et 45 (ECLI:EU:C:2002:637). Exemples de produits relevant de la sous-position 9021 10 10: Exemples de produits relevant de la section XI:

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Renseignements tarifaires du Royaume-Uni pour 9030000000

Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.

  • UK 9030332090 Valable du 7 mai 2026 au 6 mai 2029 · Décision 600015325 sur GOV.UK

    A handheld unit used to test passive components removed from printed circuit boards (PCBs). The PCB is sourced in the UK, then fitted with an LCD screen, test leads, and a battery. The unit is programmed and calibrated before being sealed inside a plastic case. The complete unit is packaged in a small cardboard box (21 x 14 x 3cms) along with a detailed manual.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9030 - Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiation GIR 5 (b) - Has been used to identify the type of packaging. GIR 6 - Has been used to classify the goods to subheading level 9030.33 - Other, without a recording device 8 Digit Code 9030.3320 - Resistance measuring instruments 10 Digit Code 9030.3320.90 – Other than; For use …

  • UK 9030332090 Valable du 8 mai 2026 au 7 mai 2029 · Décision 600015326 sur GOV.UK

    The product is a handheld electronic tester which is used to check that electronic components are working properly. The unit measures a capacitor's equivalent series resistance (ESR) which helps show whether the capacitor is faulty. It also measures its capacitance value components when removed from the printed circuit board (PCB), to see how much electrical charge it can hold. The unit is made up of a PCB, an LCD screen, a battery and test leads. Housed in a plastic enclosure. The test leads are applied to components when not in circuit to test their values. The goods are packaged in a small cardboard box (21 x 14 x 3cms) along with a detailed manual.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9030 - Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiation GIR 5 (b) - Has been used to identify the type of packaging GIR 6 - Has been used to classify the goods to subheading level 9030.33 - Other, without a recording device 8 Digit Code 9030.3320 - Resistance measuring instruments 10 Digit Code 9030.3320.90 – Other than; For use …

  • UK 9030337000 Valable du 18 déc. 2024 au 17 déc. 2027 · Décision 600012062 sur GOV.UK

    The power sensors are designed to provide accurate, real-time measurements of RF (Radio Frequency) signal power. One end of the power sensor has a USB connector for connection to computers and at the other end there is a N-type RF connector. The USB power sensors come with software or software compatibility that allows for easy data visualisation, logging, and analysis. Power sensors are widely used in test and measurement environments, particularly in satellite communication and RF systems. By measuring the power of the RF signals, the sensor helps detect any degradation or loss in the signal's strength. This is important for maintaining signal integrity and ensuring reliable communication. A USB power sensor involves the direct conversion of RF (radio frequency) or microwave power into a measurable voltage, which is then processed by an internal microcontroller. The sensor quantifies this voltage to determine the power level of the signal.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 9030 - Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiation GIR 6 has been used to classify the goods to subheading level 903033 - Other instruments and apparatus, for measuring or checking voltage, current, resistance or power (other than those for measuring or checking semiconductor wafers or devices) 8 Digit code 90303370 - Other, without a recording device; Other than …

+ 12 de plus
  • UK 9030390000 Valable du 20 août 2025 au 19 août 2028 · Décision 600013606 sur GOV.UK

    Apparatus for measuring and checking voltage and current from the control cabinet of AC induction motors and rotating equipment. The product does not measure or check any non electrical quantities, such as speed of rotation. The product uses self-learning algorithms to convert the electrical quantity data into information about the health, performance and energy consumption metrics (i.e. data acquisition and recording) of the assets. The results of the analysis are presented in an online dashboard alerting the user of any detected electrical failures in the assets for maintenance purposes and inform the user of potential energy savings.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 9030 - Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiation. GIR 6 - Has been used to classify this product by the terms of heading 9030 39 - Other, with a recording device. Also Classified in Accordance with: Harmonized System Explanatory Note (HSENs) to Heading 9030.

  • UK 9030400000 Valable du 12 janv. 2025 au 11 janv. 2028 · Décision 600012061 sur GOV.UK

    A handheld microwave analyser that is a portable, battery-operated device designed for testing and analysing high-frequency signals in the microwave and RF (radio frequency) range. It is a handheld device with an LCD display screen and carry strap. On the top of the unit, there are two RF connection ports, a GPS receiver, and an external reference trigger input. On the right side, there is also a LAN port, two USB ports, an SD card slot, an external reference and trigger output, and the wideband intermediate frequency output. On the left side of the unit, there is a headphone jack, DC bias variable voltage source, and charging port. This analyser is a versatile RF test instrument which can measure many parameters. It is configurable as a cable, an antenna analyser, network analyser, spectrum analyser, and power meter. When applied to satellite communication systems, this handheld microwave analyser can be used to test satellite signal strength, link quality, and antenna performance, ensuring reliable satellite communication. It also behaves like a spectrum analyser and an oscilloscope, enabling the user to measure the amplitude of signals across a range of frequencies. It can detect and analyse signal integrity and interference issues, for example noise. This is itself important for identifying sources of interference or signal degradation, which can affect network performance, especially in critical communication systems. The handheld microwave analyser can be used as a vector network analyser (VNA), which also measures the S-parameters of components like antennas and cables. It is critical in testing the reflection, transmission, and impedance matching of RF components. The handheld microwave analyser is shipped within a protective hard case with foam insert.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 9030- Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiation GIR 3B has been used as the measuring or checking electrical qualities specially designed for satellite communication systems is considered to be the essential character GIR 6 has been used to classify the goods to subheading level 903040- Other instruments and apparatus, specially designed for telecommunications (for …

  • UK 9030400000 Valable du 3 juin 2026 au 2 juin 2029 · Décision 600015573 sur GOV.UK

    The Field Probe is a handheld broadband, isotropic electric field sensor designed for Radio Frequency and telecommunications applications. It measures electric fields over a frequency range of 3 MHz to 18 GHz, with a measurement range of 0.6 to 800 V/m and a dynamic range of 62.5 DB. The probe uses three orthogonally arranged dipoles with detector diodes. The Broadband Field Meter provides battery power to the probe, calculates the resulting isotropic field strength, and displays measurement results. The meter is primarily designed as a broadband electromagnetic field (EMF) measurement device. Its main function is to record the signal detected by the connected probe, making it ideal for comprehensive field measurements. Operated via a weatherproof foil keypad with just four buttons and a perceptible click point, the meter features a backlit monochrome Liquid Crystal Display (LCD) with selectable illumination time, ensuring readings are easy to view even in bright daylight. The meter is housed in a plastic casing. The probe head is made from foam to protect the sensors while maintaining suitable (RF) characteristics. The probe measures approximately 318 mm in length with a 66 mm diameter and weighs 90 g. The probe and meter are supplied as separate components in a protective carrying case in a disassembled state and must be connected on site to form a complete operational measurement system.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 9030 - Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiation GIR 6 has been used to classify the goods to subheading level 903040- Other instruments and apparatus, specially designed for telecommunications (for example, cross-talk meters, gain measuring instruments, distortion factor meters, psophometers) Also classified in accordance with: Harmonized System Explanatory Notes (HSEN) …

  • UK 9030400000 Valable du 28 mai 2026 au 27 mai 2029 · Décision 600015574 sur GOV.UK

    A Cable Wi-Fi and Network Tester. The Cable performance testing up to 10GBASE-T plus troubleshooting (distance to fault, wire map, toning). It tests and troubleshoots Ethernet/IP, PROFINET, EtherCAT cabling with M12X, M12D, and M8D adapters (IE versions). Network features include IPv4 and v6 ping, nearest switch diagnostics (IP address, name, port / VLAN number, and advertised data rates). Ethernet Alliance-certified PoE Verification detects the PoE class (1-8) and power, and performs a load test of available PoE from the connected switch. Wi-Fi analysis to Wi-Fi 6E, including networks, channels, and access points (Duo model (6 GHz support only in countries where allowed). You can manage results and print reports from LinkWare™ PC.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9030 - Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiation GIR 6 has been used to classify the goods to subheading level 903040- Other instruments and apparatus, specially designed for telecommunications (for example, cross-talk meters, gain measuring instruments, distortion factor meters, psophometers) Also classified in accordance with: …

  • UK 9030820000 Valable du 24 nov. 2023 au 23 nov. 2026 · Décision 600009226 sur GOV.UK

    This product is a unit that is a combined constant current source and digital voltameter. The user can input the desired level of constant current or choose a simple auto ranging function. The unit is used in conjunction with a four-point probe and readings can be used to determine the resistivity of semiconductor samples, typically silicon wafers or thin metal layers. Generally used in research applications the unit can be operated as a standalone unit or can be controlled by a PC using supplied software or by the user writing a program to operate it as required. The unit can also display results from measurements as voltage, as a sheet resistance in ohms per square, or as a resistivity in ohm.cm. Also offering currents between 10nA and 100mA and cannot be adjusted to offer higher or lower currents.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 9030 - Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiation GIR 6 has been used to classify the goods to subheading level 903082 - For measuring or checking semiconductor wafers or devices (including integrated circuits) Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) Note B to heading 9030

  • UK 9030820000 Valable du 31 mai 2024 au 30 mai 2027 · Décision 600010555 sur GOV.UK

    The product is a unit that is a combined constant current source and digital voltameter contained within a plastic case. The user can input the desired level of constant current between 10 Nanoamps and 100 Milliamps or choose a simple auto ranging function. The unit is used in conjunction with a four point probe and readings can be used to determine the resistivity of semiconductor samples typically used in research applications. The product can be operated as a stand alone unit, or by using the supplied software in combination with a PC. The unit can display results as voltage, as sheet resistance in OHMS per square, as resistivity in OHMS centimetre or resistance in OHMS.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 9030 - Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiation GIR 6 has been used to classify this product to subheading level 903082 - Other instruments and apparatus; For measuring or checking semiconductor wafers or devices (including integrated circuits) Also classified in accordance with: Harmonized System Explanatory Notes (HSENs) …

  • UK 9030820000 Valable du 28 oct. 2024 au 27 oct. 2027 · Décision 600011704 sur GOV.UK

    The HM21 Test Unit is a portable meter used in researching semiconductor materials which can be battery operated or operated from the mains electricity supply using the supplied 9V adapter. It supplies one of 6 fixed constant currents from 100 nanoamps to 10 milliamps and has a digital voltage display. The Test Unit is designed to be used in conjunction with a four point probe and the readings can be used to determine the resistivity or sheet resistance of a tested sample. It can be operated as a stand alone unit with a facility to store readings onboard, or via a PC using supplied software. Stored readings can be downloaded to the PC via the supplied software. The unit can display results in mV or sheet resistan

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 9030 - Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiation GIR 6 has been used to classify this product to subheading level 903082 - Other instruments and apparatus; For measuring or checking semiconductor wafers or devices (including integrated circuits) Also classified in accordance with: Harmonized System Explanatory Notes (HSENs) …

  • UK 9030820000 Valable du 20 avr. 2026 au 19 avr. 2029 · Décision 600015322 sur GOV.UK

    A handheld electronic test instrument designed to identify and characterise discrete semiconductor devices whilst out of circuit. It automatically detects device type, including bipolar junction transistors, MOSFETs, JFETs, diodes, and diode networks, without requiring prior pin configuration. After analysis, the instrument displays pinout identification and key electrical parameters such as junction voltage, current gain (hFE), threshold voltage, and leakage current where applicable. The unit uses three test leads connected directly to the device under test and presents results on an integrated LCD. It is battery powered and supplied in a cardboard box with an instruction manual

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9030 - Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiation GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 803082 – Other instruments and apparatus; for measuring or checking semiconductor wafers or devices (including integrated circuits) Also classified in accordance with …

  • UK 9030820000 Valable du 1 mai 2026 au 30 avr. 2029 · Décision 600015323 sur GOV.UK

    A handheld unit designed to test Zener diode semiconductor components removed from printed circuit boards (PCBs). It consists of a UK sourced PCB populated with an LCD, battery and test leads, programmed and calibrated before being enclosed in a green plastic housing. The unit uses fitted flexible test leads to measure component values out of circuit and generates constant current pulses (selectable from 2mA, 5mA, 10mA and 15mA) at voltages from 0V to 50V. Each device is packaged in a cardboard box (21 × 14 × 3 cm) and supplied with a detailed manual and AAA batteries.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9030 - Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiation GIR 5 (b) - Has been used to identify the type of packaging. Packaged in a cardboard box (21 × 14 × 3 cm) GIR 6 - Has been used to classify the goods to subheading level – 903082 - Other instruments and apparatus; for measuring or checking semiconductor wafers or devices …

  • UK 9030820000 Valable du 30 avr. 2026 au 29 avr. 2029 · Décision 600015324 sur GOV.UK

    A handheld Triac and Thyristor Analyser testing device comprising a PCB and LCD display panel within a red outer housing. It is used for testing Triac and Thyristor semiconductor components that have been removed from printed circuit boards (PCBs). The device applies test currents to 100µA up to 90mA (with test load currents of up to 100mA). It automatically identifies the type of component (Thyristor or Triac) using supplied leads and also categorises the gate sensitivity. The test leads are applied to components, not in circuit, to test their values. The unit has a backlit alphanumeric LCD and is supplied with a AAA Alkaline cell battery. Packed in cardboard box (21 x 14 x 3cms) with a detailed manual.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9030 - Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiation GIR 5 (b) - Has been used to identify the type of packaging. Packaged in a cardboard box (21 x 14 x 3cms). GIR 6 - Has been used to classify the goods to subheading level 903082 - Other instruments and apparatus; for measuring or checking semiconductor wafers or devices (including …

  • UK 9030890000 Valable du 1 déc. 2025 au 30 nov. 2028 · Décision 600013761 sur GOV.UK

    The Magnetic Sensor Board (PCBA) is used in robotic lawn mowers to detect the position of magnets in three dimensions. This functionality is crucial for collision and lift detection, as well as for docking the mower in the charging station. The Magnetic Sensor Board is made from a printed circuit board (PCB) that includes various electronic components such as sensors, resistors, capacitors, and connectors. The Magnetic Sensor Board is designed by the Husqvarna Group and manufactured by suppliers according to specific specifications. The manufacturing process involves assembling the electronic components onto a PCB, soldering them in place. The units are tested by suppliers to ensure they meet Husqvarna's quality standards before shipping. The Magnetic Sensor Board works by detecting the position of magnets in three dimensions. This information is used by the mower's control system to determine if the mower has collided with an object or if it has been lifted. It also helps in accurately docking the mower in the charging station. The Magnetic Sensor Board is typically packaged in an anti-static bag to protect it from electrostatic discharge during transportation. It is then placed in a protective box with cushioning materials to prevent damage. The packaging includes labels with product information and handling instructions

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9030 Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiation GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 903089 other instruments and apparatus; other than elsewhere specified in this subheading. Also Classified in Accordance with: Harmonised System Explanatory Notes …

  • UK 9030890000 Valable du 10 déc. 2025 au 9 déc. 2028 · Décision 600013765 sur GOV.UK

    The Loop Receiver Board is used in robotic lawn mowers to receive signals from the boundary wire that defines the mowing area. This ensures that the mower stays within the designated boundaries and does not stray into unwanted areas. The Loop Receiver Board is made from a combination of materials, including: • Printed Circuit Board (PCB): Typically made from fiberglass-reinforced epoxy laminate material. • Electronic Components: Such as resistors, capacitors, diodes, microprocessors, and connectors. The Loop Receiver Board works by receiving signals from the boundary wire that is laid around the perimeter of the mowing area. These signals are processed by the board and used by the mower's control system to determine its position relative to the boundary. This ensures that the mower stays within the designated area and avoids obstacles. The Loop Receiver Board is typically packaged in anti-static bags to prevent damage from electrostatic discharge. The anti-static bags are then placed in protective boxes with necessary labels that include product information and handling instructions.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9030 Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiation GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 903089 other instruments and apparatus; other than elsewhere specified in this subheading. Also Classified in Accordance with: Harmonised System Explanatory Notes …

Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.

Restrictions et signalements pour 9030000000

  • Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XXI 9030

    Art. 3 decies, biens qui procurent des recettes importantes à la Russie

    Lire l’acte sur EUR-Lex
  • Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 9030

    Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie

    Lire l’acte sur EUR-Lex

À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.

TVA à l’importation dans l’UE

  • Allemagne 19 %
  • Autriche 20 %
  • Belgique 21 %
  • Bulgarie 20 %
  • Chypre 19 % éventuellement 3 %, 5 %
  • Croatie 25 %
  • Danemark 25 %
  • Espagne 21 %
  • Estonie 24 %
  • Finlande 25,5 %
  • France 20 %
  • Grèce 24 %
  • Hongrie 27 %
  • Irlande 23 %
  • Italie 22 %
  • Lettonie 21 %
  • Lituanie 21 %
  • Luxembourg 17 %
  • Malte 18 %
  • Pays-Bas 21 %
  • Pologne 23 %
  • Portugal 23 %
  • Roumanie 21 %
  • Slovaquie 23 %
  • Slovénie 22 %
  • Suède 25 %
  • Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Les règles d’origine préférentielles de la sous-position 903000 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.

Règles d’origine sur Access2Markets

Informations

Lorsque vous importez ou exportez "Oscilloscopes, analyseurs de spectre et autres instruments et appareils pour la mesure ou le contrôle de grandeurs électriques; instruments et appareils pour la mesure ou la détection des radiations alpha, bêta, gamma, X, cosmiques ou autres radiations ionisantes", il est important d'avoir le bon code SH ou code TARIC. Le code HS 9030000000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.

Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Oscilloscopes, analyseurs de spectre et autres instruments et appareils pour la mesure ou le contrôle de grandeurs électriques; instruments et appareils pour la mesure ou la détection des radiations alpha, bêta, gamma, X, cosmiques ou autres radiations ionisantes", veuillez noter les points suivants :

  1. Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Oscilloscopes, analyseurs de spectre et autres instruments et appareils pour la mesure ou le contrôle de grandeurs électriques; instruments et appareils pour la mesure ou la détection des radiations alpha, bêta, gamma, X, cosmiques ou autres radiations ionisantes".
  2. Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Oscilloscopes, analyseurs de spectre et autres instruments et appareils pour la mesure ou le contrôle de grandeurs électriques; instruments et appareils pour la mesure ou la détection des radiations alpha, bêta, gamma, X, cosmiques ou autres radiations ionisantes" dans le pays de destination ou l'exporter depuis le pays d'origine.
  3. Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
  4. Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
  5. Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.

En résumé, le code HS-Code ou le code TARIC pour "Oscilloscopes, analyseurs de spectre et autres instruments et appareils pour la mesure ou le contrôle de grandeurs électriques; instruments et appareils pour la mesure ou la détection des radiations alpha, bêta, gamma, X, cosmiques ou autres radiations ionisantes" est 9030000000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Oscilloscopes, analyseurs de spectre et autres instruments et appareils pour la mesure ou le contrôle de grandeurs électriques; instruments et appareils pour la mesure ou la détection des radiations alpha, bêta, gamma, X, cosmiques ou autres radiations ionisantes".

Structure du HS-Code

90
Chapitre
30
Titre
00
Sous-titre
00
CN sous-titre
00
TARIC sous-titre
80
Codes TARIC supplémentaires

1. Chapitre

Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 90 a été sélectionné pour instruments et appareils d'optique, de photographie ou de cinématographie, de mesure, de contrôle ou de précision; instruments et appareils médico-chirurgicaux; parties et accessoires de ces instruments ou appareils

2. Titre

Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 30 se réfère à Oscilloscopes, analyseurs de spectre et autres instruments et appareils pour la mesure ou le contrôle de grandeurs électriques; instruments et appareils pour la mesure ou la détection des radiations alpha, bêta, gamma, X, cosmiques ou autres radiations ionisantes.

Arborescence HS-Code

9000000000 80

Chapitre INSTRUMENTS ET APPAREILS D'OPTIQUE, DE PHOTOGRAPHIE OU DE CINÉMATOGRAPHIE, DE MESURE, DE CONTRÔLE OU DE PRÉCISION; INSTRUMENTS ET APPAREILS MÉDICO-CHIRURGICAUX; PARTIES ET ACCESSOIRES DE CES INSTRUMENTS OU APPAREILS

9030000000 80

Oscilloscopes, analyseurs de spectre et autres instruments et appareils pour la mesure ou le contrôle de grandeurs électriques; instruments et appareils pour la mesure ou la détection des radiations alpha, bêta, gamma, X, cosmiques ou autres radiations ionisantes

9030100000 80

- Instruments et appareils pour la mesure ou la détection des radiations ionisantes

9030200000 80

- Oscilloscopes et oscillographes

9030310000 10

- autres instruments et appareils pour la mesure ou le contrôle de la tension, de l'intensité, de la résistance ou de la puissance (autres que ceux pour la mesure ou le contrôle des disques ou des dispositifs à semi-conducteur)

9030310000 80

- - Multimètres, sans dispositif enregistreur

9030310010 80

- - - destinés à des aéronefs civils

9030310090 80

- - - autres

9030320000 80

- - Multimètres, avec dispositif enregistreur

9030330000 80

- - autres, sans dispositif enregistreur

9030332000 80

- - - Instruments pour la mesure de la résistance

9030332010 80

- - - - destinés à des aéronefs civils

9030332090 80

- - - - autres

9030337000 80

- - - autres

9030390000 80

- - autres, avec dispositif enregistreur

9030400000 80

- autres instruments et appareils, spécialement conçus pour les techniques de la télécommunication (hypsomètres, kerdomètres, distorsiomètres, psophomètres, par exemple)

9030820000 10

- autres instruments et appareils

9030820000 80

- - pour la mesure ou le contrôle des disques ou des dispositifs à semi-conducteur (y compris les circuits intégrés)

9030840000 80

- - autres, avec dispositif enregistreur

9030890000 80

- - autres

9030900000 80

- Parties et accessoires