Nouveau Décrivez un produit, obtenez le code NC. Aussi en API et MCP pour les agents IA. Essai gratuit
Aller au contenu

Numéro tarifaire 9031000000 80 - Instruments, appareils et machines de mesure ou de contrôle, non dénommés ni compris ailleurs dans le présent chapitre; projecteurs de profils

M’alerter par e-mail

Restrictions commerciales pour l'importation de marchandises pour 9031000000 80

Cette table contient des informations sur les restrictions commerciales pour l'importation de marchandises dans l'UE et l'UE dans les pays tiers. Le tableau contient des informations sur les les restrictions commerciales dues à des unions douanières, des préférences, des quotas tarifaires, les unions douanières, les contrôles vétérinaires, les droits de douane des pays tiers et les quotas tarifaires non préférentiels quotas.

Droits 54
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Suspension tarifaire de la conformité aérienne 119
IQ
Iraq IQ
Instruments d'optique, de photographie ou de cinématographie, ayant entre 50 et 100 ans, autres que ceux repris sous les codes additionnels 4008, 4010, 4011, 4013, 4023, 4040 - 4048
23-05-2003
Restrictions à l'entrée en libre circulation 465
SY
Syria SY
Instruments d'optique, de photographie ou de cinématographie, ayant entre 50 et 100 ans, autres que ceux repris sous les codes additionnels 4008, 4010, 4011, 4013, 4023, 4040 - 4048
29-05-2025
Restrictions à l'entrée en libre circulation 465
SY
Syria SY
Autres que ceux relevant du règlement (CE) n° 1332/2013 (JO L 335): pas de restrictions
29-05-2025
Restrictions à l'entrée en libre circulation 465
IQ
Iraq IQ
Autres que ceux relevant du règlement (CE) n° 1210/2003 (JO L 169): pas de restrictions
23-05-2003
Restrictions à l'entrée en libre circulation 465
FO
Faroe Islands FO
01-01-1997
0 %
Préférence tarifaire 142
XL
Melilla XL
01-01-1999
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Préférence tarifaire 142
AD
Andorra AD
01-01-2006
0 %
Droit de l'union douanière 106
TR
Türkiye TR
01-01-2006
0 %
Droit de l'union douanière 106
SM
San Marino SM
01-01-2006
0 %
Droit de l'union douanière 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Préférence tarifaire 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Préférence tarifaire 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Préférence tarifaire 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Préférence tarifaire 142
EC
Ecuador EC
01-01-2017
0 %
Préférence tarifaire 142
GB
United Kingdom GB
01-01-2021
0 %
Préférence tarifaire 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Préférence tarifaire 142
GH
Ghana GH
01-01-2027
0 %
Préférence tarifaire 142
CL
Chile CL
01-02-2025
0 %
Préférence tarifaire 142
TN
Tunisia TN
01-03-1998
0 %
Préférence tarifaire 142
MA
Morocco MA
01-03-2000
0 %
Préférence tarifaire 142
LB
Lebanon LB
01-04-2006
0 %
Préférence tarifaire 142
JO
Jordan JO
01-05-2002
0 %
Préférence tarifaire 142
EG
Egypt EG
01-06-2004
0 %
Préférence tarifaire 142
XC
Ceuta XC
01-07-1991
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Préférence tarifaire 142
MX
Mexico MX
01-07-2016
0 %
Préférence tarifaire 142
KE
Kenya KE
01-07-2024
0 %
Préférence tarifaire 142
US
United States US
01-07-2026
0 %
Préférence tarifaire 142
2200
Central America 2200
01-08-2013
0 %
Préférence tarifaire 142
CO
Colombia CO
01-08-2013
0 %
Préférence tarifaire 142
VN
Viet Nam VN
01-08-2020
0 %
Préférence tarifaire 142
DZ
Algeria DZ
01-09-2005
0 %
Préférence tarifaire 142
GE
Georgia GE
01-09-2014
0 %
Préférence tarifaire 142
SY
Syria SY
01-11-1978
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Préférence tarifaire 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Préférence tarifaire 142
CM
Cameroon CM
04-08-2014
0 %
Préférence tarifaire 142
1035
SADC EPA 1035
10-10-2016
0 %
Préférence tarifaire 142
ZA
South Africa ZA
10-10-2016
0 %
Préférence tarifaire 142
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Préférence tarifaire 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Préférence tarifaire 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Préférence tarifaire 142
IL
Israel IL
16-05-2023
0 %
Préférence tarifaire 142
SB
Solomon Islands SB
17-05-2020
0 %
Préférence tarifaire 142
CH
Switzerland CH
20-12-1972
0 %
Préférence tarifaire 142
PG
Papua New Guinea PG
20-12-2009
0 %
Préférence tarifaire 142
FJ
Fiji FJ
28-07-2014
0 %
Préférence tarifaire 142
1033
CARIFORUM 1033
29-12-2008
0 %
Préférence tarifaire 142
WS
Samoa WS
31-12-2018
0 %
Préférence tarifaire 142
Contrôles et documents 4
RU
Russian Federation RU
24-04-2026
– 23-04-2031
Document requis
interdit sans document
Contrôle à l'importation 762
BY
Belarus BY
25-02-2025
Document requis
interdit sans document
Contrôle à l'importation 760
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 762
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 760

Explication des restrictions commerciales

Erga Omnes signifie "pour tous".

Les pays tiers sont des pays qui n'appartiennent pas à l'UE.

Le SPG signifie 'Système de préférences généralisées'.

Le SPG+ signifie 'Système de préférences généralisées Plus'.

European Economic Area (EEA) signifie tous les États membres de l'UE et l'Islande, le Liechtenstein et la Norvège.

Les PTOM sont des "Pays et territoires d'outre-mer". Ils ne sont pas membres de l'UE. Plus d'informations

'CARIFORUM est une organisation régionale d'intégration économique comprenant 15 États membres de la Communauté des Caraïbes (CARICOM) et la République dominicaine.'

'L'APE SADC signifie "Southern African Development Community - Economic Partnership Agreement" (Accord de partenariat économique).'

Droit signifie "droit de douane".

Estimer le coût d’importation pour 9031000000

  • Valeur en douane 1 000,00 €
  • Aucun droit des pays tiers n’est enregistré pour cette origine.
  • TVA à l’importation 20 % 200,00 €
  • Total 1 200,00 €

Peut être inférieur sous conditions :

  • Airworthiness tariff suspension: 0 %

Simple estimation. La valeur en douane est le prix incluant le transport et l’assurance jusqu’à la frontière de l’UE. Les accises, autres redevances et droits antidumping propres à un producteur ne sont pas inclus. Les taux préférentiels exigent une preuve d’origine valable. Groupes de pays et exclusions : TARIC, au novembre 2026.

Mesures à l’exportation pour 9031000000

Ce qui s’applique quand ces marchandises quittent l’UE : contrôles à l’exportation, autorisations (biens à double usage et autres), interdictions par destination et unité supplémentaire de la déclaration d’exportation.

Mesures 2
1008
All third countries 1008
Instruments d'optique, de photographie ou de cinématographie, ayant entre 50 et 100 ans, autres que ceux repris sous les codes additionnels 4008, 4010, 4011, 4013, 4023, 4040 - 4048
01-01-2007
Restriction on export 467
1008
All third countries 1008
Autres que ceux relevant du règlement (CE) n° 1210/2003 (JO L 169): pas de restrictions
01-01-2007
Restriction on export 467
Contrôles et documents 7
RU
Russian Federation RU
25-02-2025
Document requis
interdit sans document
Export control 709
BY
Belarus BY
25-02-2025
Document requis
interdit sans document
Export control 766
BY
Belarus BY
25-02-2025
Document requis
interdit sans document
Export control 767
UA
Ukraine UA
25-02-2025
Document requis
interdit sans document
Export control 709
UA
Ukraine UA
25-08-2022
Document requis
interdit sans document
Export control 767
1008
All third countries 1008
15-12-2013
Document requis
interdit sans document
Export authorization 473
IR
Iran, Islamic Republic of IR
31-01-2026
Document requis
interdit sans document
Export control 767

Historique

Taux de droit et mesures pour ce code dans le temps (versions annuelles).

Règles d’origine préférentielles pour 9031000000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

  • EU-Chile Association Agreement · Chili

    EU-Algeria Association Agreement · Algérie

    EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Îles Féroé, Liechtenstein, Norvège, Suisse

    EU-Egypt Association Agreement · Égypte

    EU-Georgia DCFTA · Géorgie

    EU-Iceland FTA · Islande

    EU-Jordan Association Agreement · Jordanie

    EU-Central America Association Agreement

    EU-Lebanon Association Agreement · Liban

    EU-Morocco Association Agreement · Maroc

    EU-Moldova DCFTA · Moldavie

    EU-Mexico Global Agreement · Mexique

    Pan-Euro-Mediterranean (PEM) Convention · Albanie, Andorre, Bosnie-Herzégovine, Égypte, Îles Féroé, Islande, Kosovo, Liechtenstein, Macédoine du Nord, Monténégro, Norvège, Palestine, Suisse, Turquie

    EU-Tunisia Association Agreement · Tunisie

    EU-Ukraine DCFTA · Ukraine

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EPA CARIFORUM

    EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

    EPA Pacific · Fidji, Îles Salomon, Papouasie-Nouvelle-Guinée, Samoa

    EU-Israel Association Agreement · Israël

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this Chapter ; profile projectors / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie

    Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors / or: Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Automatic regulating or controlling instruments and apparatus / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EU-Japan EPA · Japon

    CTH except from heading 96.20; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Korea FTA · Corée du Sud

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this Chapter ; profile projectors / or: Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product

  • EPA SADC · Afrique du Sud

    Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this Chapter ; profile projectors / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex–works price of the product

  • EU-Singapore FTA · Singapour

    Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product

  • EU-Viet Nam FTA · Viêt Nam

    Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: / or: Manufacture from materials of any heading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70% of the ex-works price of the product.

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 9031000000

9031 20 00 Notes explicatives de la nomenclature combinée: Bancs d'essai

Les bancs d'essai pour le contrôle des pompes d'injection des moteurs diesels comportent essentiellement, fixés sur le même bâti, un moteur électrique et un dispositif comprenant des injecteurs et des tubes en verre gradué pour le contrôle du débit des éléments de la pompe d'injection, même équipés d'un appareil auxiliaire (stroboscope) permettant de contrôler le moment exact des injections de carburant.

9031 80 20 Notes explicatives de la nomenclature combinée: pour la mesure ou le contrôle de grandeurs géométriques

Les grandeurs géométriques sont, par exemple: longueur, distance, diamètre, rayon, courbure, angle, pente, volume, rugosité d'une surface. Rentrent également dans la présente sous-position les niveaux à bulle d'air. Ne relèvent pas de cette sous-position les interféromètres pour le contrôle de la planéité des surfaces à usages de laboratoires (sous-position9027 50 00).

Notes du chapitre 90

Notes 1. Le présent chapitre ne comprend pas: a) les articles à usages techniques, en caoutchouc vulcanisé, non durci (no 4016), en cuir naturel ou reconstitué (no 4205), en matières textiles (no 5911); b) les ceintures et bandages en matières textiles, dont l'effet recherché sur l'organe à soutenir ou maintenir est uniquement fonction de l'élasticité (ceintures de grossesse, bandages thoraciques, bandages abdominaux, bandages pour les articulations ou les muscles, par exemple) (section XI); c) les produits réfractaires du no 6903; les articles pour usages chimiques ou autres usages techniques, du no 6909; d) les miroirs en verre, non travaillés optiquement, du no 7009 et les miroirs en métaux communs ou en métaux précieux, n'ayant pas le caractère d'éléments d'optique (no 8306 ou chapitre 71); e) les articles en verre des nos 7007, 7008, 7011, 7014, 7015 ou 7017; f) les parties et fournitures d’emploi général, au sens de la note 2 de la section XV, en métaux communs (section XV) et les articles similaires en matières plastiques (chapitre 39); relèvent toutefois du no 9021 les articles spécialement conçus pour être utilisés exclusivement comme implants pour la médecine, la chirurgie, l’art dentaire ou l’art vétérinaire. g) les pompes distributrices comportant un dispositif mesureur, du no 8413; les bascules et balances à vérifier et compter les pièces usinées, ainsi que les poids à peser présentés isolément (no 8423); les appareils de levage ou de manutention (nos 8425 à 8428); les coupeuses de tous types pour le travail du papier ou du carton (no 8441); les dispositifs spéciaux pour le réglage de la pièce à travailler ou de l'outil sur les machines-outils ou machines à découper par jet d’eau, même munis de dispositifs optiques de lecture (diviseurs dits «optiques», par exemple), du no 8466 (autres que les dispositifs purement optiques: lunettes de centrage, d'alignement, par exemple); les machines à calculer (no 8470); les détendeurs, vannes et autres articles de robinetterie (no 8481); machines et appareils du no 8486, y compris les appareils pour la projection ou la réalisation des tracés de circuits sur les surfaces sensibilisées des matériaux semi-conducteurs; h) les projecteurs d'éclairage des types utilisés pour cycles ou automobiles (no 8512); les lampes électriques portatives du no 8513; les appareils cinématographiques d'enregistrement ou de reproduction du son ainsi que les appareils pour la reproduction en série de supports de son (no 8519); les lecteurs de son (no 8522), les caméras de télévision, les appareils photographiques numériques et les caméscopes (no 8525); les appareils de radiodétection et de radiosondage, les appareils de radionavigation et les appareils de radiotélécommande (no 8526); les connecteurs de fibres optiques, faisceaux ou câbles de fibres optiques (no 8536); les appareils de commande numérique du no 8537; les articles dits «phares et projecteurs scellés» du no 8539; les câbles de fibres optiques du no 8544; ij) les projecteurs du no 9405; k) les articles du chapitre 95; l) les monopodes, les bipieds, les trépieds et articles similaires, du n° 9620; m) les mesures de capacité, qui sont classées avec les ouvrages de la matière constitutive; n) les bobines et supports similaires (classement d'après la matière constitutive: no 3923, section XV, par exemple). 2. Sous réserve des dispositions de la note 1 ci-dessus, les parties et accessoires pour machines, appareils, instruments ou articles du présent chapitre sont classés conformément aux règles ci-après: a) les parties et accessoires consistant en articles compris dans l'une quelconque des positions du présent chapitre ou des chapitres 84, 85 ou 91 (autres que les nos 8487, 8548 ou 9033) relèvent de ladite position quels que soient les machines, appareils ou instruments auxquels ils sont destinés; b) lorsqu'ils sont reconnaissables comme exclusivement ou principalement destinés à une machine, un instrument ou un appareil particuliers ou à plusieurs machines, instruments ou appareils d'une même position (même des nos 9010, 9013 ou 9031), les parties et accessoires, autres que ceux visés au paragraphe précédent, sont classés dans la position afférente à cette ou ces machines, instruments ou appareils; c) les autres parties et accessoires relèvent du no 9033. 3. Les dispositions des notes 3 et 4 de la section XVI s'appliquent également au présent chapitre. 4. Le no 9005 ne couvre pas les lunettes de visée pour armes, les périscopes pour sous-marins ou chars de combat ni les lunettes pour machines, appareils ou instruments du présent chapitre ou de la section XVI (no 9013). 5. Les machines, appareils et instruments optiques de mesure ou de contrôle, susceptibles de relever à la fois du no 9013 et du no 9031, sont classés dans cette dernière position. 6. Au sens du no 9021, on considère comme «articles et appareils orthopédiques» les articles et appareils servant: — soit à prévenir ou à corriger certaines difformités corporelles, — soit à soutenir ou à maintenir des parties du corps à la suite d'une maladie, d'une opération ou d'une blessure. Les articles et appareils orthopédiques comprennent les chaussures orthopédiques ainsi que les semelles intérieures spéciales, conçues en vue de corriger les affections orthopédiques du pied, pour autant qu'elles soient 1o) fabriquées sur mesure ou 2o) fabriquées en série, présentées par unités et non par paires et conçues pour s'adapter indifféremment à chaque pied. 7. Le no 9032 comprend uniquement: a) les instruments et appareils pour la régulation du débit, du niveau, de la pression ou d'autres caractéristiques des fluides gazeux ou liquides, ou pour le contrôle automatique des températures, même si leur fonctionnement a son principe dans un phénomène électrique variable avec le facteur recherché, et qui ont pour fonction d'amener ce facteur à une valeur prescrite et de l'y maintenir sans être influencés par d'éventuelles perturbations, grâce à une mesure continue ou périodique de sa valeur réelle; b) les régulateurs automatiques de grandeurs électriques, ainsi que les régulateurs automatiques d'autres grandeurs dont l'opération a son principe dans un phénomène électrique variable avec le facteur à régler, et qui ont pour fonction d'amener ce facteur à une valeur prescrite et de l'y maintenir sans être influencés par d'éventuelles perturbations, grâce à une mesure continue ou périodique de sa valeur réelle. Notes complémentaires 1. On entend par «électroniques», au sens des sous-positions 9015 30 10, 9025 80 40, 9026 10 21, 9026 10 29, 9026 20 20, 9026 80 20, 9027 10 10 et 9032 10 20, les instruments et appareils comportant un ou plusieurs articles relevant des nos 8540, 8541 ou 8542. Toutefois, ne sont pas pris en considération, pour l'application de cette disposition, les articles des nos 8540, 8541 ou 8542 ayant uniquement la fonction de redresseur de courant ou qui ne sont présents que dans la partie alimentation de ces instruments ou appareils. 2. Aux fins de la sous-position 9021 10 10, on entend par «articles et appareils d’orthopédie» les articles et appareils qui sont spécialement conçus pour une fonction orthopédique déterminée, par opposition aux produits qui pourraient être utilisés à des fins diverses (par exemple, les produits pour les articulations, ligaments ou tendons sursollicités par les activités sportives ou la dactylographie, ainsi que les produits qui servent uniquement à atténuer la douleur de la partie du corps déficiente ou infirme causée, par exemple, par une réaction inflammatoire). Les «articles et appareils d’orthopédie» doivent empêcher complètement un mouvement spécifique de la partie du corps déficiente ou infirme (par exemple, des articulations, ligaments ou tendons) afin de prévenir d’autres blessures ou difformités corporelles ou une aggravation de ces blessures ou difformités, à la différence d’autres produits qui ne peuvent pas empêcher des mouvements spécifiques, mais qui préviennent les mouvements réflexes (mouvements involontaires) en raison de leur rigidité relative due à la présence, par exemple, de gouttières souples, pelotes de compression, d’une matière textile non élastique ou de sangles de contention de type «velcro».

Notes de la section XVIII

INSTRUMENTS ET APPAREILS D'OPTIQUE, DE PHOTOGRAPHIE OU DE CINÉMATOGRAPHIE, DE MESURE, DE CONTRÔLE OU DE PRÉCISION; INSTRUMENTS ET APPAREILS MÉDICO-CHIRURGICAUX; HORLOGERIE; INSTRUMENTS DE MUSIQUE; PARTIES ET ACCESSOIRES DE CES INSTRUMENTS OU APPAREILS

Autres notes explicatives du chapitre

Note complémentaire 2 Voir également la note 6 du chapitre 90 et l’arrêt dans les affaires jointes C-260/00 à C-263/00, Lohmann GmbH & Co. KG et Medi Bayreuth Weihermüller & Voigtmann GmbH & Co. KG contre Oberfinanzdirektion Koblenz, points 36, 37, 39, 40, 43 et 45 (ECLI:EU:C:2002:637). Exemples de produits relevant de la sous-position 9021 10 10: Exemples de produits relevant de la section XI:

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Renseignements tarifaires du Royaume-Uni pour 9031000000

Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.

  • UK 9031499000 Valable du 29 juil. 2025 au 28 juil. 2028 · Décision 600013425 sur GOV.UK

    A C-Cell instrument, which is used to measure various parameters to determine the quality of baked goods and the analysis makes sure the product conforms to baking standards. The instrument takes a number of images of the baked good under inspection and analysis software then produces values for a number of parameters such as colour, dimensions and shape, internal cell size, inclusions, e.g. the distribution of currents in a hot cross bun. These values can then be compared against known values to ensure consistency of production and quality. It is made from a steel casing with a plastic front panel and contains a number of LED lights, an HD camera and all necessary wiring and cabling. Dimensions of the instrument are: height 770mm x width 480mm x depth 370mm. The instrument is packaged inside a wooden crate for shipping.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 5b - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading 903149 - Other optical instruments and appliances: Other than for inspecting semiconductor wafers or devices (including integrated circuits) or for inspecting photomasks or reticles used in manufacturing semiconductor devices (including integrated circuits). 8-digit code 90314990 - Other than profile …

  • UK 9031499000 Valable du 9 oct. 2026 au 8 oct. 2029 · Décision 600016102 sur GOV.UK

    A portable, handheld optical measuring device designed to measure and check railway wheelsets. The device uses non-contact laser light-section technology to capture wheel profile, diameter, back-to-back distance and other wheelset geometrical measurements. The handheld sensor transmits the measurement data to a tablet running dedicated software for processing, evaluation and display.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 6 - Has been used to classify the goods to subheading 903149 - Other optical instruments and appliances: Other than for inspecting semiconductor wafers or devices (including integrated circuits) or for inspecting photomasks or reticles used in manufacturing semiconductor devices (including integrated circuits). 8-digit code 90314990 - Other than profile projectors. Also classified in accordance with: Chapter …

  • UK 9031499000 Valable du 16 oct. 2026 au 15 oct. 2029 · Décision 600016367 sur GOV.UK

    A machine vision inspection systems for contact lens manufacturing. It uses cameras, optical systems to capture images of the dry lenses in the process of soft contact manufacturing, and use machine vision algorithm to process the image to produce the results of pass or fail. This is an intelligent quality control system. The system is packaged with boxes and crates and will shipped to a machine builder to integrate into the whole production line or machine.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 3 C – Has been used as it is considered there is no essential character, and therefore has been classified to last in numerical order within the Tariff. GIR 5 B - Has been used to identify the type of packaging - Packaged with boxes and crates. GIR 6 - Has been used to classify the goods to subheading level 9031 49 - For Other optical instruments and appliances; For Other For inspecting semiconductor wafers or …

+ 20 de plus
  • UK 9031802000 Valable du 18 nov. 2024 au 17 nov. 2027 · Décision 600011839 sur GOV.UK

    The rotary encoder measures the angular position of a rotating shaft. The Encoder is a critical part of a satellite telecommunications “system” which is used for communications over commercial frequency satellites. The “system” provides voice and data connectivity to radio frequency (RF) networks. The Encoders provide precise feedback about the antenna's orientation in relation to the satellite and this is vital for maintaining optimal antenna positioning, ensuring effective and reliable communication with the satellite. The Encoders are mounted on the antenna itself and they comprise a fixed part and a shaft which rotates with a rotation axis of the antenna as the antenna moves, the encoder generates electrical signals corresponding to its position. Encoders maintain effective operation of the motion control ‘sub’ system for satellite antennas. The encoder is typically coupled with a motor that adjusts the antenna’s orientation. As the motor turns the antenna, the encoders digital interface sends the axis data to the Motion Axis Controller. For shipment, the units are packaged individually in purpose designed cardboard carton.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 9031 measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 9031 80 other instruments, appliances and machines 8 Digit Code 9031 80 20 - for measuring or checking geometrical quantities Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to heading 9031

  • UK 9031802000 Valable du 15 août 2025 au 14 août 2028 · Décision 600013515 sur GOV.UK

    This product is designed to deliver high-performance, fully integrated dimensional measurement and surface roughness inspection both on the shop floor and in the metrology laboratory. It has three axes of travel powered by linear motor systems designed by the company. It is built with a granite structure and anodized aluminium design for precise metrology and long-term reliability

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect –a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9031 measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify the goods to subheading level 903180 other instruments, appliances and machines 8 digit code 90318020 - for measuring or checking geometrical quantities Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to heading 9031

  • UK 9031808000 Valable du 22 févr. 2024 au 21 févr. 2027 · Décision 600009919 sur GOV.UK

    Trace Heating Monitoring Unit which is fully automatic and monitors the integrity of the trace heating circuits every 2.5 hours. It remains dormant until the monitoring unit detects a fault and the system automatically switches to backup circuit. There are various LED lights to the front for displaying the system status and the enclosure is plastic containing LED lamps, electronic monitoring board (PCB), switchgear MCB, wires and terminals.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRS): GIR 1 has been used to classify this product by the terms of Heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify this product to subheading level 903180 - Other instruments, appliances and machines 8 Digit Code: 90318080 - Other than for measuring or checking geometrical quantities Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to Heading 9031

  • UK 9031808000 Valable du 11 juil. 2024 au 10 juil. 2027 · Décision 600010619 sur GOV.UK

    This product is called an auto-compact system, which is a digital vehicle inspection system designed for automotive production lines. This system is positioned at the end of the production line, and the auto-compact captures 100 plus images per vehicle. Post image capture, an AI algorithms detect and record damage displayed on a fully customisable user friendly dashboard.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRS): GIR 1 has been used to classify this product by the terms of Heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify this product to subheading level 903180 - Other instruments, appliances and machines 8 Digit Code: 90318080 - Other than for measuring or checking geometrical quantities Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to Heading 9031 (I) (A) (4)

  • UK 9031808000 Valable du 4 sept. 2024 au 3 sept. 2027 · Décision 600011250 sur GOV.UK

    A smoke detector sensitivity tester. The tester works by circulating a dosed smoke test aerosol via the detector and measuring the smoke obscuration returning to the controller, to control the obscuration level. This process verifies the exact obscuration alarming points of each detector. The maximum working height is 6.3M. Maximum obscuration for photoelectric 19.7 percent/metre. The kit includes a main head unit and power connections. These are presented with instruction leaflets in a preformed foam case and outer bag, packaged in a cardboard carton for shipping purposes.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 5(b) has been used to identify the packaging GIR 6 has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines 8 Digit Code 903180 80 – Other than For measuring or checking geometrical quantities Also classified in accordance with: Harmonised system explanatory notes (HSENs) to Heading 9031

  • UK 9031808000 Valable du 25 nov. 2024 au 24 nov. 2027 · Décision 600011847 sur GOV.UK

    The interleaved grid on the top of the DS-4C is the precipitation or “moisture" sensor. The brass cylinder protruding from the bottom of the enclosure is the temperature sensor. For reliable rain and snow detection the unit must be mounted in a location that exposes the moisture sensor to a clear view of the sky. The unit should not be mounted directly under eaves or overhangs. It should not be mounted so close to the ground that it may become buried in snow. For proper temperature detection the DS-4C must be mounted outdoors, away from sources of heat. Operating temperature range is -40°C to +85°C. Note that, when powered, the DS-4C moisture grid will always remain hot. This is normal. This allows the sensor to continuously melt snow and evaporate both rain and snow from the grid. The DS-4C can be mounted by screwing the base conduit hub onto an appropriate size free-standing conduit or by using the mounting holes in each corner of the enclosure.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines 8 Digit Code 903180 80 – Other than For measuring or checking geometrical quantities Also classified in accordance with: Harmonised system explanatory notes (HSENs) to Heading 9031

  • UK 9031808000 Valable du 21 nov. 2024 au 20 nov. 2027 · Décision 600011857 sur GOV.UK

    A mechanical structure of the system is made on stainless steel AISI-316L. The scanner is engineered to operate effectively in the demanding meat processing environment. With its advanced technology, the system enhances production efficiency by providing accurate fat measurements and improving quality control. The Fat content is one of the most important parameters to control in the meat industry as they influence the nutritional value and eating quality of the meat. All parts of the system potentially in contact with meat during the operation of the system are made of food-grade materials, including the conveyor belt, and the plastic cover of the inspection tunnel. The system is an innovative Magnetic Induction scanner specifically designed for vertical scanning of meat parts, with a particular focus on hams, within production lines. Its robust design ensures reliability and ease of integration into existing production workflows, making it an essential tool for meat processors aiming to optimize their operations.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 - Has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines Digit Code: 903180 80 – Other than For measuring or checking geometrical quantities Also Classified in Accordance with: Harmonized System Explanatory Notes (HSEN's) to Heading 9031

  • UK 9031808000 Valable du 2 déc. 2024 au 1 déc. 2027 · Décision 600011943 sur GOV.UK

    The Vertiv Watchdog environment monitors primarily read and log temperature and humidity levels. It is possible the watchdog series can be augmented with further sensors for tracking other parameters. The environment monitor is designed for controlled indoor environments like server rooms. These monitors play a critical role in providing real-time monitoring of environmental conditions that could potentially affect the performance of equipment such as servers, routers, switches, and other electronic devices. The Vertiv Watchdog monitors can detect and alert staff to temperature fluctuations, ensuring that the equipment stays within optimal operating ranges. Overheating can cause hardware malfunctions, degradation, or failure. The main goal of Vertiv Geist environmental monitors is to proactively detect potential risks and issues that could affect sensitive equipment. When any monitored parameter goes out of the set range (for example, when temperature, power, or humidity goes beyond a critical threshold), the watchdog system will trigger an alert via email or SMS & SNMP traps. By receiving real-time alerts, maintenance teams can take corrective actions before issues escalate.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines 8 Digit Code 903180 80 – Other than For measuring or checking geometrical quantities Also classified in accordance with: Harmonised system explanatory notes (HSENs) to Heading 9031

  • UK 9031808000 Valable du 2 avr. 2025 au 1 avr. 2028 · Décision 600012434 sur GOV.UK

    Sensor. A sensor mounting for an Automatic Braking System (ABS) with sealing properties to prevent water and dirt ingress in the bearing, with a sensor fitment capability, for the (ABS). The sensor is used to transmit the bearings rotation to an (ABS). Made from plastic with brass bush and steel reinforcement. Moulded plastic with reinforced steel ring with brass bush. Packaged in poly bag and cardboard box.

    Justification

    For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter, profile projectors. GIR 5(b) has been used to identify the packaging. a cardboard box. GIR 6 has been used to classify the goods to subheading level 9031.80 - Other instruments, appliances and machines. 8-digit code 90318080 – Other than for measuring or checking geometrical quantities. Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to Chapter 90 General notes (F) 3.

  • UK 9031808000 Valable du 8 avr. 2025 au 7 avr. 2028 · Décision 600012742 sur GOV.UK

    The Military Test Set is a versatile test set used primarily for testing, simulating, and analyzing various avionics systems. The device is designed to be lightweight, portable, and user-friendly, making it a valuable tool for avionics maintenance and testing. The military test set is specifically designed for military use. It is capable of comprehensive testing, simulation, and analysis of various military avionics systems, including IFF (Identification Friend or Foe) modes, TCAS (Traffic Collision Avoidance System), and TACAN (Tactical Air Navigation) systems12. It also supports Mode 4 and Mode 5 testing, which are critical for military operations. Additionally, the product includes features like built-in bays for KIV-77 and KIV-78 crypto appliqués, making it suitable for secure military communications testing. Key functions: Interrogator/Transponder Testing: It supports testing for Modes 1, 2, 3A, C, S, EHS, ADS-B TX and RX, and Mode 5. TCAS Testing: It can test TCAS I, TCAS II, and E-TCAS systems. TACAN Testing: It performs comprehensive testing of TACAN receiver transmitters in A/A, G/A, and A/A BCN modes. Crypto Testing: It includes built-in bays for KIV-77 and KIV-78 crypto appliqués for Mode 4 and Mode 5 testing. ADS-B Compliance: It tests ADS-B systems in compliance with RTCA DO-260 A and B requirements. Remote Diagnostics: It supports remote diagnostic testing and downloading of test results to a PC via USB connection.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 3 (c) - Has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff. GIR 6 - Has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines. Digit Code: 903180 80 – Other than; For measuring or checking geometrical quantities Also Classified in Accordance with: Note 3 to …

  • UK 9031808000 Valable du 5 août 2025 au 4 août 2028 · Décision 600013413 sur GOV.UK

    A DME Indicator is a cockpit instrument used in aviation to display information from a Distance Measuring Equipment (DME) system. Distance Measuring Equipment (DME) is a radio navigation technology that measures the slant range distance between an aircraft and a ground-based DME station. It operates in the UHF frequency band and is often paired with VOR (VHF Omnidirectional Range) systems. A typical DME indicator displays: Distance: In nautical miles (NM), showing how far the aircraft is from the DME station. Ground Speed: Calculated based on the rate of change of distance. Time to Station: Estimated time (in minutes) to reach the station at current speed.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 3 (c) - Has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff. GIR 6 - Has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines. Eight Digit Code: 903180 80 – Other than; For measuring or checking geometrical quantities Also Classified in Accordance with: Harmonised …

  • UK 9031808000 Valable du 20 févr. 2026 au 19 févr. 2029 · Décision 600014842 sur GOV.UK

    The product is an Mobile digital data logger of vehicle data, which is a Mobile Digital Recorder (MDR) It is based on a Linux embedded operating system. It is designed for automotive monitoring and fleet management. With a 1tb SSD (solid state drive) or HDD (hard disk drive), which can be upgraded to 2tb. The data collected from on board sensors and from cameras, includes driver performance, vehicle information and location/route data. It connects to the vehicle bus or analog sensors and collects data in real-time, and features auto download via Wi-Fi, 3g/4g or via USB on return of the vehicle to base. It transmits the data wirelessly, at scheduled times, in the event of an incident, or on user command sent with software or stored locally on SD cards/HDD. It sends urgent email alerts to specified addresses in the event of pre-determined incidents. The vehicle data collected by the data logger is encrypted and compressed to ensure security and minimize storage size. It can be used to: efficiently manage fleet vehicles. Track accidents and incidents with built-in g-sensor. Instantly warn fleet manager of accidents and pre-determined incidents; alert fleet manager to vehicle theft or misuse (geofencing); trace vehicle location and route. Proactively enhance driver safety through performance tracking; it provides evidence in the event of accident or incident. It has GPS for location, monitoring and tracking on playback. Is shock resistant. It is based on a Linux embedded operating system. With an operating voltage 8.5 to 32 vdc. Weight 2.7 kg. Dimensions 190mm (W) x 223mm (D) x 82mm (H). This new model is not identical, to previous model the additions are that instead of just 4 standard cameras, there is also an option to use 4 IP cameras or a mixture of the 2, up to 8 in total. Also, the internal chipsets have been upgraded for better performance. However, the system’s base function remains the same. It’s still a tracking system with video recording functionality.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1- Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 6 - Has been used to classify this product by the terms of heading 9031 80 - Other instruments, appliances and machines. Digit Code: 903180 80 - Other than; for measuring or checking geometrical quantities. Also Classified in Accordance with: Note 3 to Chapter 90 Harmonized System Explanatory Note (HSENs) to Heading 9031

  • UK 9031808000 Valable du 30 mars 2026 au 29 mars 2029 · Décision 600015016 sur GOV.UK

    This product is a motor speed sensor (Sin/Cos encoder) which is specifically designed to suit a specific manufacturer motor, it will not interface with any motor manufacturer product. It is used to detect the direction of rotation and the speed of the motor rotor against the motor stator and feed this information back to the motor controller (separate product). The motor can be used in a variety of applications, not only for motor vehicles. This product is generally sourced as a spare part for a motor, and it is part of the motor assembly when motors are purchased as new. The encoder includes an encapsulated PCB board, rubber, wiring, connector and pins, magnet for pickup from rotor shaft bung. The encoder is procured as a bought‑in component, and full manufacturing details are not available. The central star shaped rubber bung interfaces with the motor rotor and as the motor is driven, the rubber bung spins and the PCB board picks up the magnet identifying the direction and rpm which provides feedback to the motor controller (separate supply) which then allows accurate control of the motor. This part is packaged generally in a plastic bag for protection and packaged to suit quantities purchased.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 5 (b) - Has been used to identify the type of packaging and normal for transport GIR 6 - Has been used to classify the goods to subheading level 9031.80 - Other instruments, appliances and machines 8 Digit Code 9031.80.80 – Other than for measuring or checking geometrical quantities

  • UK 9031808000 Valable du 16 juil. 2026 au 15 juil. 2029 · Décision 600015353 sur GOV.UK

    A web-enabled multichannel temperature and humidity module. This is an industrial Ethernet monitoring controller designed to interface with external temperature and humidity sensors. The device collects environmental data from multiple connected sensors and transmits the information over an Ethernet network for remote monitoring and control. It supports Power over Ethernet (PoE) in accordance with IEEE 802.3af, allowing both power and data communication through a single network cable. The module includes an embedded web server for browser-based configuration, data logging, alarm notifications, and system integration via standard network protocols. It is commonly used for environmental monitoring in data centers. This web-enabled multichannel temperature and humidity module functions primarily as a web-enabled monitoring and communication module rather than as a standalone temperature or humidity sensor. It connects to multiple external 1-Wire temperature and humidity sensors, collects and logs their measurements, applies monitoring and alarm functions, and makes the data available over an Ethernet network. Data communication is one of this products primary functions. In addition to collecting, logging, and monitoring temperature and humidity measurements from connected sensors, it communicates sensor data to third-party software, servers, building management systems, PLCs, and cloud platforms through its Ethernet interface and supported open protocols. This communication capability is a core feature of the device and a significant part of its intended use. This module is a base unit that provides one-wire bus for up to 16 temperature and/or humidity sensors. The module would typically be packaged as an electronic instrumentation device using standard protective packaging for sensitive electronics.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRS): GIR 1 has been used to classify this product by the terms of Heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify this product to subheading level 903180 - Other instruments, appliances and machines 8 Digit Code: 90318080 - Other than for measuring or checking geometrical quantities Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to Heading 9031

  • UK 9031808000 Valable du 18 mai 2026 au 17 mai 2029 · Décision 600015354 sur GOV.UK

    The Room Alert 12SR Networked Environment Monitor is a secure, rack‑mountable device designed to continuously monitor critical environmental conditions such as temperature, humidity, power, and more. It supports multiple external sensors, enabling real‑time tracking of up to eight additional parameters and integration with optional power or analogue sensors. The device features a web-based interface for easy configuration and data viewing, and it can send automated alerts via email, SMS, SNMP traps, or third-party systems whenever conditions exceed predefined thresholds. With secure network connectivity, flexible deployment options including Power-over-Ethernet (POE), and compatibility with cloud and SNMP-based monitoring platforms, the Room Alert is ideal for protecting server rooms, data centres, network cabinets, and other critical facilities by ensuring timely detection of environmental changes and helping prevent equipment damage or downtime. Normal Protective Packing, classified with the goods.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 5(b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 903180 - Other instruments, appliances and machines 8 Digit Code 90318080 - Other than for measuring or checking geometrical quantities Also classified in accordance with: Harmonised System Explanatory Notes to heading 9031

  • UK 9031808000 Valable du 19 mai 2026 au 18 mai 2029 · Décision 600015411 sur GOV.UK

    A vet-test service kit that operates at a low electrical voltage of 24v and supplied with an external power unit. The weights, plastic pressure testing components, and foam inserts are uniquely manufactured to order. These items are utilised for tailored maintenance and calibration of Vet-Dock anaesthetic capture devices, typically carried out at the client's premises. The Vet-Dock service encompasses equipment testing. This kit facilitates diagnostic inspections and the routine servicing of Anaesthetic Capture Devices. As part of the service process, the equipment is tested before use. Case dimensions are 400mm x 325mm x 175mm. The kit is presented in a robust, hard plastic protective case which is clearly marked.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 5b has been used to identify the type of packaging and normal for transport GIR 6 has been used to classify the goods to subheading level 903180 - Other instruments, appliances and machines 8 digit code 90318080 – Other than for measuring or checking geometrical quantities Also Classified in Accordance with: Note 2b to chapter 90 Harmonised System Explanatory Notes (HSENs) to Heading 9033 Harmonised System …

  • UK 9031808000 Valable du 19 mai 2026 au 18 mai 2029 · Décision 600015412 sur GOV.UK

    A SID-test service kit that operates at a low electrical voltage of 24v and supplied with an external power unit. The weights, plastic pressure testing components, and foam inserts are uniquely manufactured to order. These items are utilised for tailored maintenance and calibration of SID-Dock anaesthetic capture devices, typically carried out at the client's premises. The service encompasses equipment testing. This kit facilitates diagnostic inspections and the routine servicing of Anaesthetic Capture Devices. As part of the service process, the equipment is tested before use. Case dimensions are 400mm x 325mm x 175mm. The kit is presented in a robust, hard plastic protective case which is clearly marked.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 5b has been used to identify the type of packaging and normal for transport GIR 6 has been used to classify the goods to subheading level 903180 - Other instruments, appliances and machines 8 digit code 90318080 – Other than for measuring or checking geometrical quantities Also Classified in Accordance with: Note 2b to chapter 90 Harmonised System Explanatory Notes (HSENs) to Heading 9033 Harmonised System …

  • UK 9031808000 Valable du 28 avr. 2026 au 27 avr. 2029 · Décision 600015443 sur GOV.UK

    A Load cell or force sensor is a devise which converts load or force into electrical signals. It is manufactured from stainless steel with a threaded centre hole that runs from the top to the bottom for mounting purposes. The cell utilises two stabilising diaphragms which are welded to the internal load cell to reduce off centre and side loading effects. This can be hermetically sealed for added durability. The load cell operates by ben mounted on a hard flat surface where it can measure forces applied to the centre of the cell.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 6 - Has been used to classify this product by the terms of heading 9031 80 - Other instruments, appliances and machines. Digit Code: 903180 80 - Other than; For measuring or checking geometrical quantities. Also Classified in Accordance with: Harmonized System Explanatory Notes (HSEN's) (30) to Heading 9031

  • UK 9031900000 Valable du 12 févr. 2026 au 11 févr. 2029 · Décision 600014496 sur GOV.UK

    An encoder bearing which is an Integrated Belt Starter Generator (IBSG) used in a passenger vehicle to measure rotation for the angular position of the generator shaft. It is made of Steel Plate Cold Commercial (SPCC) steel (or equivalent) and Hydrogenated Nitrile Butadiene Rubber (HNBR), and ferrite. It is not a permanent magnet.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify the goods to subheading level 903190 - parts and accessories Also classified in accordance with: Section XVI Note (m) Harmonised System Explanatory Notes (HSEN's) to heading 9031 Harmonised System Explanatory Notes (HSEN's) to heading 8409 (c) Harmonised System Explanatory Notes (HSEN's) to heading 8505

  • UK 9031900000 Valable du 22 oct. 2026 au 21 oct. 2029 · Décision 600016103 sur GOV.UK

    A dedicated wheel-diameter measuring gauge designed to operate with an optical railway wheelset measuring system. The gauge is positioned on the wheel during measurement and assists the system’s handheld sensor in determining the wheel diameter. The measurement data is transferred to the sensor and displayed on a tablet. The gauge does not incorporate the principal optical sensor and cannot perform the complete measuring function independently.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors. GIR 6 - Has been used to classify the goods to subheading level 903190 - parts and accessories. Also classified in accordance with: Chapter 90 to Note 2(b). Harmonized System Explanatory Notes (HSEN) to heading 9031 - parts and accessories.

Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.

Restrictions et signalements pour 9031000000

  • Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XXI 9031

    Art. 3 decies, biens qui procurent des recettes importantes à la Russie

    Lire l’acte sur EUR-Lex
  • Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 9031

    Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie

    Lire l’acte sur EUR-Lex

À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.

TVA à l’importation dans l’UE

  • Allemagne 19 %
  • Autriche 20 %
  • Belgique 21 %
  • Bulgarie 20 %
  • Chypre 19 % éventuellement 3 %, 5 %
  • Croatie 25 %
  • Danemark 25 %
  • Espagne 21 %
  • Estonie 24 % éventuellement 9 %
  • Finlande 25,5 %
  • France 20 %
  • Grèce 24 %
  • Hongrie 27 %
  • Irlande 23 %
  • Italie 22 %
  • Lettonie 21 %
  • Lituanie 21 %
  • Luxembourg 17 %
  • Malte 18 %
  • Pays-Bas 21 %
  • Pologne 23 %
  • Portugal 23 %
  • Roumanie 21 %
  • Slovaquie 23 %
  • Slovénie 22 %
  • Suède 25 %
  • Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Les règles d’origine préférentielles de la sous-position 903100 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.

Règles d’origine sur Access2Markets

Informations

Lorsque vous importez ou exportez "Instruments, appareils et machines de mesure ou de contrôle, non dénommés ni compris ailleurs dans le présent chapitre; projecteurs de profils", il est important d'avoir le bon code SH ou code TARIC. Le code HS 9031000000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.

Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Instruments, appareils et machines de mesure ou de contrôle, non dénommés ni compris ailleurs dans le présent chapitre; projecteurs de profils", veuillez noter les points suivants :

  1. Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Instruments, appareils et machines de mesure ou de contrôle, non dénommés ni compris ailleurs dans le présent chapitre; projecteurs de profils".
  2. Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Instruments, appareils et machines de mesure ou de contrôle, non dénommés ni compris ailleurs dans le présent chapitre; projecteurs de profils" dans le pays de destination ou l'exporter depuis le pays d'origine.
  3. Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
  4. Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
  5. Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.

En résumé, le code HS-Code ou le code TARIC pour "Instruments, appareils et machines de mesure ou de contrôle, non dénommés ni compris ailleurs dans le présent chapitre; projecteurs de profils" est 9031000000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Instruments, appareils et machines de mesure ou de contrôle, non dénommés ni compris ailleurs dans le présent chapitre; projecteurs de profils".

Structure du HS-Code

90
Chapitre
31
Titre
00
Sous-titre
00
CN sous-titre
00
TARIC sous-titre
80
Codes TARIC supplémentaires

1. Chapitre

Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 90 a été sélectionné pour instruments et appareils d'optique, de photographie ou de cinématographie, de mesure, de contrôle ou de précision; instruments et appareils médico-chirurgicaux; parties et accessoires de ces instruments ou appareils

2. Titre

Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 31 se réfère à Instruments, appareils et machines de mesure ou de contrôle, non dénommés ni compris ailleurs dans le présent chapitre; projecteurs de profils.

Arborescence HS-Code

9000000000 80

Chapitre INSTRUMENTS ET APPAREILS D'OPTIQUE, DE PHOTOGRAPHIE OU DE CINÉMATOGRAPHIE, DE MESURE, DE CONTRÔLE OU DE PRÉCISION; INSTRUMENTS ET APPAREILS MÉDICO-CHIRURGICAUX; PARTIES ET ACCESSOIRES DE CES INSTRUMENTS OU APPAREILS

9031000000 80

Instruments, appareils et machines de mesure ou de contrôle, non dénommés ni compris ailleurs dans le présent chapitre; projecteurs de profils

9031100000 80

- Machines à équilibrer les pièces mécaniques

9031200000 80

- Bancs d'essai

9031410000 10

- autres instruments et appareils optiques

9031410000 80

- - pour le contrôle des disques ou des dispositifs à semi-conducteur (y compris les circuits intégrés) ou pour le contrôle des masques photographiques ou des réticules utilisés dans la fabrication de dispositifs à semi-conducteur (y compris les circuits intégrés)

9031490000 80

- - autres

9031491000 80

- - - Projecteurs de profils

9031499000 80

- - - autres

9031800000 80

- autres instruments, appareils et machines

9031802000 80

- - pour la mesure ou le contrôle de grandeurs géométriques

9031808000 80

- - autres

9031900000 80

- Parties et accessoires