Nouveau Décrivez un produit, obtenez le code NC. Aussi en API et MCP pour les agents IA. Essai gratuit
Aller au contenu

Numéro tarifaire 3824600000 80 - Sorbitol, autre que celui du n$o 2905 44

Restrictions commerciales pour l'importation de marchandises pour 3824600000 80

Les droits d’autres codes avec un compte gratuit

Vous avez consulté les droits de 10 codes aujourd’hui. Créez un compte gratuit pour voir droits, mesures et historique de tous les codes.

Règles d’origine préférentielles pour 3824600000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

  • EU-Algeria Association Agreement · Algérie

    EU-Lebanon Association Agreement · Liban

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

    – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

    – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Egypt Association Agreement · Égypte

    EU-Morocco Association Agreement · Maroc

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

    – The following of this heading:

    – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Georgia DCFTA · Géorgie

    EU-Moldova DCFTA · Moldavie

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water-insoluble salts and their esters Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water-insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

    The following of this heading:

    - - / or: Prepared binders for foundry moulds or cores based on natural resinous products - - / or: Naphthenic acids, their water-insoluble salts and their esters - - / or: Sorbitol other than that of heading 2905 - - / or: Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts - - / or: Ion exchangers - - / or: Getters for vacuum tubes - - / or: Alkaline iron oxide for the purification of gas - - / or: Ammoniacal gas liquors and spent oxide produced in coal gas purification - - / or: Sulphonaphthenic acids, their water-insoluble salts and their esters - - / or: Fusel oil and Dippel's oil - - / or: Mixtures of salts having different anions - - / or: Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other subheading, except from heading 11.01 through 11.08, 17.01, 17.02 or subheading 2905.44; or A change from heading 11.01 through 11.08, 17.01, 17.02 or subheading 2905.44, whether or not there is also a change from any other subheading, provided that the weight of non-originating material of heading 11.01 through 11.08, 17.01, 17.02 or subheading 2905.44 does not exceed 20 per cent of the net weight of the product.

  • EU-Chile Association Agreement · Chili

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: — The following of this heading: — — Prepared binders for foundry moulds or cores based on natural resinous products — — Naphthenic acids, their water-insoluble salts and their esters — — Sorbitol other than that of heading 2905 — — Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts — — Ion exchangers — — Getters for vacuum tubes — — Alkaline iron oxide for the purification of gas — — Ammoniacal gas liquors and spent oxide produced in coal gas purification — — Sulphonaphthenic acids, their water-insoluble salts and their esters — — Fusel oil and Dippel's oil — — Mixtures of salts having different anions — — Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

    – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

    – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

    – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions

    – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

    Biodiesel: mixtures of mono alkyl esters of the fatty acids of the long chain of sub products of vegetable and animal oils. For greater certainty, the mono alkyl ester makes reference to methyl ester or ethyl ester of fatty acids / or: Manufacture from materials of any heading, except that of the product, and in which all the materials of Chapter 15 used are wholly obtained [20]

    Other / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product [20] See Note 4 of Appendix 2 A.

  • EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Îles Féroé, Liechtenstein, Norvège, Suisse

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

    The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

    – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

    – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel’s oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

  • EPA CARIFORUM

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: – The following of this heading Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EPA Eastern and Southern Africa

    – The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

    Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes

    Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel’s oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

  • EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included:

    – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water insoluble salts and their esters – – Sorbitol other than that of heading No 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamine's; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatine, whether or not on a paper or textile backing / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

    – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EPA Pacific · Fidji, Îles Salomon, Papouasie-Nouvelle-Guinée, Samoa

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: – The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

    Sorbitol other than that of sub-heading 2905 44 / or: (a) LDCs Manufacture from materials of any sub-heading, except that of the product and except materials of sub-heading 2905 44. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any sub-heading, except that of the product and except materials of sub-heading 2905 44. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Iceland FTA · Islande

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

    – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EU-Jordan Association Agreement · Jordanie

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: - The following of this heading: - - Prepared binders for foundry moulds or cores based on natural resinous products - - Naphthenic acids, their water-insoluble salts and their esters - - Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product - - Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts - - Ion exchangers - - Getters for vacuum tubes - - Alkaline iron oxide for the purification of gas - - Ammoniacal gas liquors and spent oxide produced in coal gas purification - - Sulphonaphthenic acids, their water-insoluble salts and their esters - - Fusel oil and Dippel's oil - - Mixtures of salts having different anions - - Copying pastes with a basis of gelatin, whether or not on a paper or textile backing - Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie

    Sorbitol other than that of sub-heading 290544 / or: Manufacture from materials of any sub-heading, except that of the product and except materials of sub-heading 290544. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the exworks price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

  • EU-Japan EPA · Japon

    CTH except from heading 17.02 and subheadings 2905.43 and 2905.44.

  • EU-Korea FTA · Corée du Sud

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products

  • EU-Central America Association Agreement

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

    — The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EU-Mexico Global Agreement · Mexique

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries; not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purifcation of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • Pan-Euro-Mediterranean (PEM) Convention · Albanie, Andorre, Bosnie-Herzégovine, Égypte, Îles Féroé, Islande, Kosovo, Liechtenstein, Macédoine du Nord, Monténégro, Norvège, Palestine, Suisse, Turquie

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

    – The following of this heading: / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

    – – Prepared binders for foundry moulds or cores based on natural resinous products

    – – Naphthenic acids, their water-insoluble salts and their esters

    – – Sorbitol other than that of heading 2905

    – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts

    – – Ion exchangers

    – – Getters for vacuum tubes

    – – Alkaline iron oxide for the purification of gas

  • EU-Palestine Interim Association Agreement · Palestine

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: - The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing - Other / or: Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product

  • EU-Singapore FTA · Singapour

    Sorbitol other than that of subheading 290544 / or: Manufacture from materials of any subheading, except that of the product and except materials of subheading 290544. However, materials of the same subheading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  • EU-Tunisia Association Agreement · Tunisie

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water-insoluble salts and their esters Sorbitol other than that of heading 2905 Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water-insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Ukraine DCFTA · Ukraine

    Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

    – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

    – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

    – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 3824600000

3824 60 11 - 3824 60 99 Notes explicatives de la nomenclature combinée: à 3824 60 99

Sorbitol, autre que celui du n o 2905 44 Sont notamment classées dans ces sous-positions les variétés de sorbitol (D-glucitol) dites non cristallisables («NC») qui sont obtenues généralement par hydrogénation à haute pression à partir de sirop de glucose contenant une certaine quantité d'autres oligosaccharides. Leur teneur en sorbitol (D-glucitol) se situe entre 60 et 80 % en poids par rapport à la matière sèche, les autres composants étant essentiellement d'autres polyalcools et oligosaccharides partiellement hydrogénés. De ce fait, la tendance à la cristallisation du sorbitol (D-glucitol) se trouve fortement réduite [de là, la dénomination utilisée: «sorbitol (D-glucitol) non cristallisable»]. Le sorbitol répondant aux dispositions de la note 1 du chapitre 29 est classé aux sous-positions 2905 44 11 à 2905 44 99.

Notes du chapitre 38

Notes 1. Le présent chapitre ne comprend pas: a) les produits de constitution chimique définie présentés isolément, autres que ceux ci-après: 1) le graphite artificiel (no 3801); 2) les insecticides, antirongeurs, fongicides, herbicides, inhibiteurs de germination et régulateurs de croissance pour plantes, désinfectants et produits similaires, présentés dans des formes ou emballages prévus au no 3808; 3) les produits extincteurs présentés comme charges pour appareils extincteurs ou dans des grenades ou bombes extinctrices (no 3813); 4) les matériaux de référence certifiés, spécifiés dans la note 2 ci-après; 5) les produits visés dans les notes 3 point a) ou 3 point c) ci-après; b) les mélanges de produits chimiques et de substances alimentaires ou autres ayant une valeur nutritive, des types utilisés dans la préparation d'aliments pour la consommation humaine (no 2106 généralement); c) les produits du no 2404; d) les scories, cendres et résidus (y compris les boues, autres que les boues d'épuration) contenant des métaux, de l'arsenic ou leurs mélanges et remplissant les conditions de la note 3 point a) ou 3 point b) du chapitre 26 (no 2620); e) les médicaments (nos 3003 ou 3004); f) les catalyseurs épuisés du type utilisé pour l'extraction des métaux communs ou pour la fabrication de composés chimiques à base de métaux communs (no 2620), les catalyseurs épuisés du type de ceux utilisés principalement pour la récupération des métaux précieux (no 7112) ainsi que les catalyseurs constitués de métaux ou d'alliages métalliques se présentant sous forme de poudre très fine ou de toile métallique, par exemple (sections XIV ou XV). 2. A) Au sens du no 3822, on entend par «matériau de référence certifié» un matériau de référence qui est accompagné d'un certificat indiquant les valeurs des propriétés certifiées et les méthodes utilisées pour déterminer ces valeurs ainsi que le degré de certitude à associer à chaque valeur et qui est apte à être utilisé à des fins d'analyse, d'étalonnage ou de référence. B) À l'exclusion des produits des chapitres 28 ou 29, aux fins du classement des matériaux de référence certifiés, le no 3822 a priorité sur toute autre position de la nomenclature. 3. Sont compris dans le no 3824 et non dans une autre position de la nomenclature: a) les cristaux cultivés (autres que les éléments d'optique) d'oxyde de magnésium ou de sels halogénés de métaux alcalins ou alcalino-terreux, d'un poids unitaire égal ou supérieur à 2,5 grammes; b) les huiles de fusel; l'huile de Dippel; c) les produits encrivores conditionnés dans des emballages de vente au détail; d) les produits pour correction de stencils, les autres liquides correcteurs, ainsi que les rubans correcteurs (autres que ceux du no9612), conditionnés dans des emballages pour la vente au détail; e) les montres fusibles pour le contrôle de la température des fours (cônes de Seger, par exemple). 4. Dans la nomenclature, par «déchets municipaux» on entend les déchets mis au rebut par les particuliers, les hôtels, les restaurants, les hôpitaux, les magasins, les bureaux, etc., et les détritus ramassés sur les routes et les trottoirs ainsi que les matériaux de construction de rebut et les débris de démolition. Les déchets municipaux contiennent généralement un grand nombre de matières, comme les matières plastiques, le caoutchouc, le bois, le papier, les matières textiles, le verre, le métal, les produits alimentaires, les meubles cassés et autres articles endommagés ou mis au rebut. L'expression «déchets municipaux» ne couvre toutefois pas: a) les matières ou articles qui ont été séparés des déchets, comme par exemple les déchets de matières plastiques, de caoutchouc, de bois, de papier, de matières textiles, de verre ou de métal, ou encore les déchets et débris électriques et électroniques (y compris les batteries usagées) qui suivent leur régime propre; b) les déchets industriels; c) les déchets pharmaceutiques, tels que définis par la note 4 point k) du chapitre 30; d) les déchets cliniques définis à la note 6 point a) ci-dessous. 5. Aux fins du no 3825, par «boues d'épuration» on entend les boues provenant des stations d'épuration des eaux usées urbaines et les déchets de prétraitement, les déchets de curage et les boues non stabilisées. Les boues stabilisées, qui sont aptes à être utilisées en tant qu'engrais, sont exclues (chapitre 31). 6. Aux fins du no 3825, l'expression «autres déchets» couvre: a) les déchets cliniques, c'est-à-dire les déchets contaminés provenant de la recherche médicale, des travaux d'analyse ou d'autres traitements médicaux, chirurgicaux, dentaires ou vétérinaires qui contiennent souvent des agents pathogènes et des substances pharmaceutiques et qui doivent être détruits de manière particulière (par exemple: pansements, gants usagés et seringues usagées); b) les déchets de solvants organiques; c) les déchets de solutions (liqueurs) décapantes pour métaux, de liquides hydrauliques, de liquides pour freins et de liquides antigel; d) les autres déchets des industries chimiques ou des industries connexes. Toutefois, l'expression «autres déchets» ne couvre pas les déchets qui contiennent principalement des huiles de pétrole ou de minéraux bitumineux (no 2710). 7. Aux fins du no 3826, le terme biodiesel désigne les esters mono-alkylés d'acides gras du type de ceux utilisés comme carburants ou combustibles, dérivés de graisses et d’huiles animales, végétales ou d'origine microbienne même usagées. Notes de sous-positions 1. Les nos 3808 52 et 3808 59 couvrent uniquement les marchandises du no 3808, contenant une ou plusieurs des substances suivantes : de l’acide perfluorooctane sulfonique et ses sels; de l’alachlore (ISO); de l’aldicarbe (ISO); de l’aldrine (ISO); de l’azinphos-méthyl (ISO); du binapacryl (ISO); du camphéchlore (ISO) (toxaphène); du captafol (ISO); du carbofurane (ISO); du chlordane (ISO); du chlordiméforme (ISO); du chlorobenzilate (ISO); des composés du mercure; des composés du tributylétain; du DDT (ISO) (clofénotane (DCI), 1,1,1-trichloro-2,2-bis(p-chlorophényl)éthane); du dibromure d'éthylène (ISO) (1,2-dibromoéthane); du dichlorure d'éthylène (ISO) (1,2-dichloroéthane); de la dieldrine (ISO, DCI); du 4,6- dinitro-o-crésol (DNOC (ISO)) ou ses sels; du dinosèbe (ISO), ses sels ou ses esters; de l’endosulfan (ISO); du fluoroacétamide (ISO); du fluorure de perfluorooctane sulfonyle; de l'heptachlore (ISO); de l’hexachlorobenzène (ISO); du 1,2,3,4,5,6-hexachlorocyclohexane (HCH (ISO)), y compris le lindane (ISO, DCI); du méthamidophos (ISO); du monocrotophos (ISO); de l’oxiranne (oxyde d’éthylène); du parathion (ISO); du parathion-méthyle (ISO) (méthyl-parathion); du pentachlorophénol (ISO), ses sels ou ses esters; des perfluorooctane sulfonamides; du phosphamidon (ISO); du 2,4,5-T (ISO) (acide 2,4,5-trichlorophénoxyacétique), ses sels ou ses esters; du trichlorfon (ISO). 2. Les nos3808 61 à 3808 69 couvrent uniquement les marchandises du n° 3808 contenant de l’alpha-cyperméthrine (ISO), du bendiocarbe (ISO), de la bifenthrine (ISO), du chlorfénapyr (ISO), de la cyfluthrine (ISO), de la deltaméthrine (DCI, ISO), de l’étofenprox (DCI), du fénitrothion (ISO), de la lambda-cyhalothrine (ISO), du malathion (ISO), du pirimiphos-méthyle (ISO) ou du propoxur (ISO). 3. Les nos 3824 81 à 3824 89 couvrent uniquement les mélanges et préparations contenant une ou plusieurs des substances suivantes : de l'oxiranne (oxyde d'éthylène); des polybromobiphényles (PBB); des polychlorobiphényles (PCB); des polychloroterphényles (PCT); du phosphate de tris(2,3-dibromopropyle); de l’aldrine (ISO); du camphéchlore (ISO) (toxaphène); du chlordane (ISO); du chlordécone (ISO); du DDT (ISO) (clofénotane (DCI); 1,1,1-trichloro-2,2-bis(pchlorophényl) éthane); de la dieldrine (ISO, DCI); de l'endosulfan (ISO); de l'endrine (ISO); de l’heptachlore (ISO); du mirex (ISO); du 1,2,3,4,5,6- hexachlorocyclohexane (HCH (ISO)), y compris lindane (ISO, DCI); du pentachlorobenzène (ISO); du hexachlorobenzène (ISO); de l’acide perfluorooctane sulfonique, ses sels; des perfluorooctane sulfonamides; du fluorure de perfluorooctane sulfonyle; des éthers tètra-, penta-, hexa-, hepta- ou octabromodiphényliques; des paraffines chlorées à chaîne courte. Les paraffines chlorées à chaîne courte sont des mélanges de composés, ayant un degré de chloration supérieur à 48 % en poids, et dont la formule moléculaire est CxH(2x-y+2)Cly, où x=10 – 13 et y= 1 – 13. 4. Aux fins des nos 3825 41 et 3825 49, par «déchets de solvants organiques» on entend les déchets qui contiennent principalement des solvants organiques, impropres en l'état à leur utilisation initiale, qu'ils soient ou non destinés à la récupération des solvants.

Notes de la section VI

PRODUITS DES INDUSTRIES CHIMIQUES OU DES INDUSTRIES CONNEXES Notes 1. A) Tout produit (autre que les minerais de métaux radioactifs) répondant aux spécifications du libellé de l'un des nos 2844 ou 2845 devra être classé sous cette position, et non dans une autre position de la nomenclature. B) Sous réserve des dispositions du point A ci-dessus, tout produit répondant aux spécifications du libellé de l'un des nos 2843, 2846 ou 2852 devra être classé dans cette position, et non dans une autre position de la présente section. 2. Sous réserve des dispositions de la note 1 ci-dessus, tout produit qui, en raison, soit de sa présentation sous forme de doses, soit de son conditionnement pour la vente au détail, relève de l'un des nos 3004, 3005, 3006, 3212, 3303, 3304, 3305, 3306, 3307, 3506, 3707 ou 3808, devra être classé sous cette position et non dans une autre position de la nomenclature. 3. Les produits présentés en assortiments consistant en plusieurs éléments constitutifs distincts relevant en totalité ou en partie de la présente section et reconnaissables comme étant destinés, après mélange, à constituer un produit des sections VI ou VII, sont à classer dans la position afférente à ce dernier produit, sous réserve que ces éléments constitutifs soient: a) en raison de leur conditionnement, nettement reconnaissables comme étant destinés à être utilisés ensemble sans être préalablement reconditionnés; b) présentés en même temps; c) reconnaissables, par leur nature ou leurs quantités respectives, comme complémentaires les uns des autres. 4. Lorsqu’un produit répond à la fois aux spécifications d'une ou de plusieurs positions de la section VI du fait que son nom ou sa fonction y sont mentionnés et aux spécifications du no3827, il est à classer dans la position dont le libellé mentionne son nom ou sa fonction et non pas dans le no3827.

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Restrictions et signalements pour 382460

  • Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XXI 3824

    Art. 3 decies, biens qui procurent des recettes importantes à la Russie

    Lire l’acte sur EUR-Lex
  • Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 3824

    Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie

    Lire l’acte sur EUR-Lex

À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.

Contingents tarifaires pour 382460

  • Épuisé 09.0884 Origine: groupe de pays 5500

    Mercosur - Starch derivatives

    1 mai 2026 – 31 déc. 2026

    0 Kilograms
    Solde restant (0 %)
    Volume 66 667
  • Critique 09.1949 Origine: Chili

    TRQ-CL-Starch and starch derivatives

    1 janv. 2026 – 31 déc. 2026

    300 000 Kilograms
    Solde restant (100 %)
    Volume 300 000
  • Ouvert 09.6725 Origine: Ukraine

    Mannitol D-glucitol (sorbitol) Sorbitol other than that of subheading 2905 44

    1 janv. 2026 – 31 déc. 2026

    150 000 Kilograms
    Solde restant (100 %)
    Volume 150 000
  • Ouvert 09.8210 Origine: Viêt Nam

    Mannitol, Sorbitol, Dextrins and other modified starches

    1 janv. 2026 – 31 déc. 2026

    1 916 400 Kilograms
    Solde restant (95,8 %)
    Volume 2 000 000

Source : Commission européenne, rapports sur les contingents tarifaires, état au 30 oct. 2026. Les soldes changent chaque jour.

Commerce de l’UE en 2025 pour 382460

Importations extra-UE
1,4 M €
1 284 t
Exportations extra-UE
21,3 M €

Principaux pays d’origine selon la valeur importée

  1. Turquie 590,9 k €
  2. Japon 191,2 k €
  3. Thaïlande 155 k €
  4. Chine 151,6 k €
  5. États-Unis 106,8 k €

Codes NC8 sous ce code : 4. Source : Eurostat, Comext, CC BY 4.0, traité par hscode.info. Le commerce confidentiel n’est pas attribué aux codes.

Droit d’importation au Royaume-Uni pour 382460

  • 6% + 13 GBP / 100 kg
  • 6% + 19 GBP / 100 kg
  • 8% + 31 GBP / 100 kg
  • 8% + 44 GBP / 100 kg

Droits de pays tiers de tous les codes britanniques sous cette sous-position du SH. Source : UK Department for Business and Trade, au 2 nov. 2026. Le tarif britannique diffère du tarif de l’UE.

TVA à l’importation dans l’UE

  • Allemagne 19 %
  • Autriche 20 %
  • Belgique 21 % éventuellement 6 %
  • Bulgarie 20 %
  • Chypre 19 %
  • Croatie 25 %
  • Danemark 25 %
  • Espagne 21 %
  • Estonie 24 %
  • Finlande 25,5 %
  • France 20 %
  • Grèce 24 % éventuellement 6 %
  • Hongrie 27 %
  • Irlande 23 %
  • Italie 22 %
  • Lettonie 21 %
  • Lituanie 21 %
  • Luxembourg 17 %
  • Malte 18 %
  • Pays-Bas 21 %
  • Pologne 23 %
  • Portugal 23 %
  • Roumanie 21 %
  • Slovaquie 23 %
  • Slovénie 22 % éventuellement 9,5 %
  • Suède 25 %
  • Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Les règles d’origine préférentielles de la sous-position 382460 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.

Règles d’origine sur Access2Markets

Informations

Lorsque vous importez ou exportez "Sorbitol, autre que celui du n$o 2905 44", il est important d'avoir le bon code SH ou code TARIC. Le code HS 3824600000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.

Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Sorbitol, autre que celui du n$o 2905 44", veuillez noter les points suivants :

  1. Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Sorbitol, autre que celui du n$o 2905 44".
  2. Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Sorbitol, autre que celui du n$o 2905 44" dans le pays de destination ou l'exporter depuis le pays d'origine.
  3. Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
  4. Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
  5. Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.

En résumé, le code HS-Code ou le code TARIC pour "Sorbitol, autre que celui du n$o 2905 44" est 3824600000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Sorbitol, autre que celui du n$o 2905 44".

Structure du HS-Code

38
Chapitre
24
Titre
60
Sous-titre
00
CN sous-titre
00
TARIC sous-titre
80
Codes TARIC supplémentaires

1. Chapitre

Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 38 a été sélectionné pour produits divers des industries chimiques

2. Titre

Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 24 se réfère à Liants préparés pour moules ou noyaux de fonderie; produits chimiques et préparations des industries chimiques ou des industries connexes (y compris celles consistant en mélanges de produits naturels), non dénommés ni compris ailleurs.

3. Sous-titre

Les deux derniers chiffres du code harmonisé international sont plus spécifiques et définissent des sous-catégories de produits. Dans l'exemple ci-dessus, la 60 se réfère à Sorbitol, autre que celui du n$o 2905 44.

Arborescence HS-Code

3800000000 80

Chapitre PRODUITS DIVERS DES INDUSTRIES CHIMIQUES

3824000000 80

Liants préparés pour moules ou noyaux de fonderie; produits chimiques et préparations des industries chimiques ou des industries connexes (y compris celles consistant en mélanges de produits naturels), non dénommés ni compris ailleurs

3824100000 80

- Liants préparés pour moules ou noyaux de fonderie

3824100010 80

- - à base de résines synthétiques

3824100090 80

- - autres

3824300000 80

- Carbures métalliques non agglomérés mélangés entre eux ou avec des liants métalliques

3824300010 10

- - Carbures de tungstène

3824300010 80

- - - sous forme de particules irrégulières et non fluides, simplement mélangés à de la poudre métallique

3824300020 80

- - - Poudre prête à la compression, sous forme de particules sphériques ou de forme granulaire, homogènes et fluides, simplement mélangée à de la poudre métallique et/ou à d’autres carbures, ainsi qu’à un liant organique

3824300030 80

- - - autres, sous forme de particules sphériques ou de forme granulaire, homogènes et fluides, simplement mélangés à de la poudre métallique et/ou à d’autres carbures

3824300040 80

- - - autres, simplement mélangés à de la poudre métallique et/ou à d’autres carbures

3824300090 80

- - autres

3824400000 80

- Additifs préparés pour ciments, mortiers ou bétons

3824500000 80

- Mortiers et bétons, non réfractaires

3824501000 80

- - Béton prêt à la coulée

3824509000 80

- - autres

3824600000 80

- Sorbitol, autre que celui du n$o 2905 44

3824601100 10

- - en solution aqueuse

3824601100 80

- - - contenant du D-mannitol dans une proportion inférieure ou égale à 2 % en poids calculée sur sa teneur en D-glucitol

3824601900 80

- - - autre

3824609100 10

- - autre

3824609100 80

- - - contenant du D-mannitol dans une proportion inférieure ou égale à 2 % en poids calculée sur sa teneur en D-glucitol

3824609900 80

- - - autre

3824810000 10

- Marchandises mentionnées dans la Note 3 de sous-positions du présent chapitre

3824810000 80

- - contenant de l'oxiranne (oxyde d'éthylène)

3824820000 80

- - contenant des polybromobiphényles (PBB), des polychloroterphényles (PCT) ou des polychlorobiphényles (PCB)

3824820010 80

- - - préparation contenant des polychlorobiphényles (PCB

3824820020 80

- - - préparation contenant de l’hexabromobiphényle (CAS 36355-01-8)

3824820090 80

- - - autres

3824830000 80

- - contenant du phosphate de tris(2,3-dibromopropyle

3824840000 80

- - contenant de l'aldrine (ISO), du camphéchlore (ISO) (toxaphène), du chlordane (ISO), du chlordécone (ISO), du DDT (ISO) (clofénotane (DCI), 1,1,1-trichloro-2,2-bis(p-chlorophényl)éthane), de la dieldrine (ISO, DCI), de l'endosulfan (ISO), de l'endrine (ISO) de l'heptachlore (ISO) ou du mirex (ISO)

3824840010 80

- - - préparation contenant du DDT (ISO) (CAS 50-29-3)

3824840015 80

- - - préparation contenant du camphéchlore (ISO)

3824840020 80

- - - préparation contenant du chlordane (ISO) (CAS 57-74-9)

3824840030 80

- - - préparation contenant de la dieldrine (ISO) (CAS 60-57-1)

3824840040 80

- - - préparation contenant de l’endrine (ISO) (CAS 72-20-8)

3824840050 80

- - - préparation contenant de l’endosulfan (ISO) (115-29-7)

3824840060 80

- - - préparation contenant du chlordécone (ISO) (CAS 143-50-0)

3824840070 80

- - - préparation contenant du mirex

3824840090 80

- - - autres

3824850000 80

- - contenant du 1,2,3,4,5,6-hexachlorocyclohexane [HCH (ISO)] y compris lindane (ISO, DCI)

3824860000 80

- - contenant du pentachlorobenzène (ISO) ou du hexachlorobenzène (ISO)

3824870000 80

- - contenant de l'acide perfluorooctane sulfonique, ses sels, des perfluorooctane sulfonamides, ou du fluorure de perfluorooctane sulfonyle

3824880000 80

- - contenant des éthers tetra-, penta-, hexa-, hepta- ou octabromodiphényliques

3824890000 80

- - Contenant des paraffines chlorées à chaîne courte

3824890010 80

- - - alcanes en C10-13, chloro (CAS 85535-84-8 )

3824890090 80

- - - autres

3824910000 10

- autres

3824910000 80

- - Mélanges et préparations constitués essentiellement de méthylphosphonate de (5-éthyl-2-méthyl-2-oxido-1,3,2-dioxaphosphinan-5-yl)méthyle et de méthyle et de méthylphosphonate de bis[(5-éthyl-2-méthyl-2-oxido-1,3,2-dioxaphosphinan-5-yl)méthyle]

3824920000 80

- - Esters de polyglycol d'acide méthylphosphonique

3824990000 80

- - autres

3824991000 80

- - - Sulfonates de pétrole, à l'exclusion des sulfonates de pétrole de métaux alcalins, d'ammonium ou d'éthanolamines; acides sulfoniques d'huiles de minéraux bitumineux, thiophénés, et leurs sels

3824991500 80

- - - Échangeurs d'ions

3824992000 80

- - - Compositions absorbantes pour parfaire le vide dans les tubes ou valves électriques

3824992500 80

- - - Pyrolignites (de calcium, etc.); tartrate de calcium brut; citrate de calcium brut

3824993000 80

- - - Acides naphténiques, leurs sels insolubles dans l'eau et leurs esters

3824994500 10

- - - autres

3824994500 80

- - - - Préparations désincrustantes et similaires

3824995000 80

- - - - Préparations pour la galvanoplastie

3824995500 80

- - - - Mélanges de mono-, di- et tri-, esters d'acides gras du glycérol (émulsionnants de corps gras)

3824996100 10

- - - - Produits et préparations utilisés à des fins pharmaceutiques ou chirurgicales

3824996100 80

- - - - - Produits intermédiaires obtenus au cours de la fabrication d'antibiotiques, provenant de la fermentation de Streptomyces tenebrarius, même séchés, destinés à la fabrication de médicaments du n$o 3004 pour la médecine humaine

3824996200 80

- - - - - Produits intermédiaires de la fabrication des sels de monensin

3824996400 80

- - - - - autres

3824996500 80

- - - - Produits auxiliaires du genre de ceux utilisés en fonderie (autres que ceux visés au n$o 3824 10 00)

3824997000 80

- - - - Préparations ignifuges, hydrofuges et autres, utilisées pour la protection des constructions

3824997500 10

- - - - autres

3824997500 80

- - - - - Tranches de niobate de lithium, non dopées

3824998000 80

- - - - - Mélange d'amines dérivées d'acides gras dimérisés, d'un poids moléculaire moyen de 520 ou plus mais n'excédant pas 550

3824998500 80

- - - - - 3-(1-Éthyl-1-méthylpropyl)isoxazole-5-ylamine sous forme de solution dans le toluène

3824998600 80

- - - - - Mélanges constitués essentiellement de méthylphosphonate de diméthyle, d'oxiranne et de pentaoxyde de diphosphore

3824999200 10

- - - - - Produits ou préparations chimiques composés principalement de constituants organiques, non dénommés ni compris ailleurs

3824999200 80

- - - - - - sous forme liquide à 20 °C

3824999201 80

- - - - - - - Naphtalène, dérivés chloro (CAS 70776-03-3)

3824999202 80

- - - - - - - préparation contenant de l’hexabromocyclododécane (CAS 25637-99-4, 3194-55-6)

3824999207 10

- - - - - - - Mélanges contenant des dérivés halogénés de l’éthylène ou du propylène

3824999207 80

- - - - - - - - R514a [contenant 74,7 % de 1,1,1,4,4,4-hexafluoro-2-butène (HFC-1336mzz) et 25,3 % de trans-1,2-dichloroéthylène]

3824999208 80

- - - - - - - - autres

3824999210 10

- - - - - - - Mélanges contenant, en poids, plus de 20 % de gazoles paraffiniques obtenus par synthèse et/ou hydrotraitement, d'origine non fossile

3824999210 80

- - - - - - - - en provenance du Canada

3824999214 80

- - - - - - - - autres

3824999217 80

- - - - - - - Mélanges contenant, en poids, pas plus de 20 % de gazoles paraffiniques obtenus par synthèse et/ou hydrotraitement, d'origine non fossile

3824999221 80

- - - - - - - Produits de réaction de la 1,3,4-thiadiazolidine-2,5-dithione, du formaldéhyde et du 4-heptylphénol, ramifié et linéaire (PR-HP) (avec ≥ 0,1% m/m de 4-heptylphénol, ramifié et linéaire)

3824999222 80

- - - - - - - Solution contenant : -30 % ou plus mais pas plus de 40 % en poids d'hexafluorophosphate de lithium (CAS RN 21324-40-3), et -60 % ou plus mais pas plus de 70 % en poids de carbonate d'éthyle méthyle (CAS RN 623-53-0), ou de carbonate de diméthyle (CAS RN 616-38-6)

3824999223 80

- - - - - - - Complexes phosphatobutyliques de titane(IV), d'éthanol et de propane-2-ol (CAS RN 109037-78-7), dissous dans l'éthanol et le propan-2-ol

3824999224 80

- - - - - - - 4-(1,1,3,3-tétraméthylbutyl)phénol, éthoxylé

3824999225 80

- - - - - - - Mélange contenant en poids: -55 % ou plus mais pas plus de 65 % de (2S,3S,4S,5R,6R)-2-(((2R,3R,5S,6R)-4-(((2R,3S,4S,5R,6R)-3-acétoxy-4,5-bis(benzyloxy)-6-((benzyloxy)méthyl)tetrahydro-2H-pyran-2-yl)oxy)-3,5-bis(benzyloxy)-6-(4-méthoxy-4-oxobutoxy)tetrahydro-2H-pyran-2-yl)méthoxy)-6-((((2S,3S,4S,5R,6R)-3-acétoxy-4,5-bis(benzyloxy)-6-((benzyloxy)méthyl)tetrahydro-2H-pyran-2-yl)oxy)méthyl)tetrahydro-2H-pyran-3,4,5-triyl tribenzoate (CAS RN 1233475-58-5), -35 % ou plus mais pas plus de 45 % de toluène (CAS RN 108-88-3)

3824999227 80

- - - - - - - Méthyl 5-(diméthylamino)-2-méthyl-5-oxopentanoate (CAS RN 1174627-68-9) d'une pureté en poids de 75 % ou plus

3824999228 80

- - - - - - - Préparation contenant en poids: -30 % ou plus, mais pas plus de 60 % de 3a,4,4a,5,8,8a,9,9a-octahydro-4,9:5,8-diméthano-1H-benz[f]indène (CAS RN 7158-25-0), -10 % ou plus mais pas plus de 50 % de 3a,4,7,7a-tetrahydro-4,7-méthanoindène (CAS RN 77-73-6), et -contenant ou pas 10 % ou plus mais pas plus de 40 % de résine d'hydrocarbures de pétrole (CAS RN 68132-00-3)

3824999229 80

- - - - - - - Préparation contenant, en poids: - 85 % ou plus, mais pas plus de 99 % d'éther de polyéthylène glycol d'acrylate de butyl 2-cyano 3-(4-hydroxy-3-méthoxyphényl) et - 1 % ou plus, mais pas plus de 15 %, de trioléate de polyoxyéthylène (20) sorbitane

3824999230 80

- - - - - - - Mélange de C10-C14 tert-alkylamines (numéro CE: 701-175-2)

3824999233 80

- - - - - - - Préparation anti-corrosion constituée de sels d'acide dinonylnaphtalènesulfonique présentés: - sur un support de cire minérale, même modifiée chimiquement ou - sous forme de solution dans un solvant organique

3824999234 80

- - - - - - - 4-Nonylphénol, ramifié et linéaire, éthoxylé

3824999237 80

- - - - - - - Mélange d’acétates de 3-butène-1,2-diol d’une teneur en poids de 65% ou plus de diacétate de 3-butène-1,2-diol (CAS RN 18085-02-4)

3824999238 80

- - - - - - - Produits de la réaction du trichlorure de phosphoryle avec du 2-méthyloxirane (CAS RN 1244733-77-4)

3824999240 80

- - - - - - - Solution de 2-chloro- 5-(chlorométhyl)pyridine (CAS RN 70258-18-3) dans un diluant organique

3824999241 80

- - - - - - - Formaldéhyde, produits de réaction oligomères avec l'aniline (MDA technique) (CAS RN 25214-70-4)

3824999244 80

- - - - - - - Mélange, contenant en poids:  -90 % ou plus mais n'excédant pas 95 % d'éthoxylate de crésol (CAS RN 37281-57-5), et -5 % ou plus mais n'excédant pas 10 % d'éthoxylate de xylénol (CAS RN 61723-82-8)

3824999248 80

- - - - - - - Préparation contenant en poids: -80 % ou plus mais pas plus de 90 % de 3a,4,7,7a-tetrahydro-4,7-méthanoindène (CAS RN 77-73-6), et -pas plus de 10 % de 3a,4,4a,5,8,8a,9,9a-octahydro-1H-4,9:5,8-diméthanocyclopenta[b]naphtalène (CAS RN 7158-25-0), et - 0,5 % ou plus mais pas plus de 3 % de 2,6-di-tert-butyl-p-crésol (CAS RN 128-37-0)

3824999249 80

- - - - - - - préparation à base d'éthoxylate de 2,5,8,11-tétraméthyle-6-dodécyne-5,8-diol (CAS RN 169117-72-0)

3824999251 80

- - - - - - - Mélange contenant en poids 40 % ou plus mais pas plus de 50 % de méthacrylate de 2-hydroxyéthyle et 40 % ou plus mais pas plus de 50 % d'ester de glycérol de l'acide borique

3824999252 80

- - - - - - - Électrolyte contenant: -5 % ou plus mais pas plus de 20 % d'hexafluorophosphate de lithium (CAS RN 21324-40-3) ou de tétrafluoroborate de lithium (CAS RN 14283-07-9), -60 % ou plus mais pas plus de 90 % d'un mélange de carbonate d'éthylène (CAS RN 96-49-1), de carbonate de diméthyle (CAS RN 616-38-6) et/ou de carbonate d'éthyle et de méthyle (CAS RN 623-53-0), -0,5 % ou plus mais pas plus de 20 % de 2,2-dioxyde de 1,3,2-dioxathiolane (CAS RN 1072-53-3) utilisé dans la fabrication de batteries de véhicules automobiles

3824999254 80

- - - - - - - Bis[(9-oxo- 9H-thioxanthène-1-yloxy)acétate] de poly(tétraméthylène glycol) n'excédant pas en moyenne 5 motifs monomères (CAS RN 813452-37-8)

3824999255 80

- - - - - - - Additifs pour peintures et revêtements, contenant: - un mélange d'esters d'acide phosphorique obtenu à partir de la réaction de l'anhydride phosphorique avec du 4 - (1,1-diméthyl-propyl)-phénol et des copolymères de styrène-alcool allylique (CAS RN 84605-27-6), et - 30 % ou plus mais pas plus de 35 % en poids d'alcool isobutylique

3824999258 80

- - - - - - - Mélange contenant en poids: -56 % ou plus mais pas plus de 85 % d'isomères du divinylbenzène (CAS RN 1321-74-0) -15 % ou plus mais pas plus de 44 % d'isomères de l''éthylvinylbenzène (CAS RN 28106-30-1)

3824999261 80

- - - - - - - 3',4',5'-Trifluorobiphényl-2-amine, sous la forme d'une solution dans du toluène, contenant en poids 80 % ou plus de 3',4',5'-trifluorobiphényl-2-amine, mais sans excéder 90 %

3824999262 80

- - - - - - - Solution de 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) dans du tétrahydrofurane (CAS RN 109-99-9), contenant en poids 6 % ou plus de 9-borabicyclo[3.3.1]nonane

3824999263 80

- - - - - - - Polymère composé d'un polycondensat de formaldéhyde et de naphthalénediol, chimiquement modifié par réaction avec un halogénoalcyne, dissous dans de l'acétate de méthyléther propylèneglycol

3824999266 10

- - - - - - - Alcool éthylique obtenu à partir de produits agricoles (tels qu’énumérés à l’annexe I du traité sur le fonctionnement de l’Union européenne), dénaturé ou non dénaturé, à l’exclusion des produits d’une teneur en eau supérieure à 0,3 % (m/m) mesurée conformément à la norme EN15376, ainsi que l’alcool éthylique obtenu à partir de produits agricoles (tels qu’énumérés à l’annexe I du traité sur le fonctionnement de l’Union européenne) et mélangé à l’essence dans une proportion supérieure à 10 % (v/v)

3824999266 80

- - - - - - - - destiné à être utilisé comme carburant

3824999267 80

- - - - - - - - destiné à d'autres utilisations

3824999268 80

- - - - - - - Préparation contenant en poids: - 20 % (±1 %) de ((3-(sec-butyl)-4-(décyloxy)phényl)méthanétriyl)tribenzène (numéro CAS 1404190-37-9) - dans un solvant de: - 10 % (± 5 %) de 2-sec-butylphénol (numéro CAS 89-72-5) - 64 % (± 7 %) de solvant naphta aromatique lourd (pétrole) (numéro CAS 64742-94-5) et - 6 % (± 1,0 %) de naphtalène (numéro CAS 91-20-3)

3824999269 80

- - - - - - - Préparation contenant en poids: - 80 % ou plus mais pas plus de 92 % de bisphénol A bis(phosphate de diphényle) (CAS RN 5945-33-5) - 7 % ou plus mais pas plus de 20 % d’oligomères de bisphénol-A bis(phosphate de diphényle) et - pas plus d’1 % de phosphate de triphénol (CAS RN 115-86-6)

3824999270 80

- - - - - - - Mélange de 80 % (± 10 %) de 1-[2-(2-aminobutoxy)éthoxy]but-2-ylamine et 20 % (± 10 %) de 1-({[2-(2-aminobutoxy)éthoxy]méthyl} propoxy)but-2-ylamine

3824999273 80

- - - - - - - Amines trialkyles en C8-10 (CAS RN 68814-95-9) d'une pureté en poids de 95 % ou plus

3824999275 80

- - - - - - - Mélange, contenant en poids : -75 % ou plus de tétrabutylétain (CAS RN 1461-25-2), -pas plus de 20 % de chlorure de tributylétain (CAS RN 1461-22-9), -pas plus de 4 % de dichlorure de dibutylétain (CAS RN 683-18-1), destiné à la production de composés de butylétain utilisés dans la fabrication du verre et de chlorure de tributylétain utilisé comme catalyseur dans l'industrie pharmaceutique

3824999279 80

- - - - - - - Mélange, contenant en poids : -du chlorure de tributylétain (CAS RN 1461-22-9) d'une pureté en poids de 80 % ou plus; -pas plus de 5 % de tétrabutylétain (CAS RN 1461-25-2), -pas plus de 6 % de dichlorure de dibutylétain (CAS RN 683-18-1), -pas plus de 11 % d'o-xylène (CAS RN 95-47-6), destiné à la production de chlorure de tributylétain utilisé comme catalyseur dans l'industrie pharmaceutique

3824999281 80

- - - - - - - Masse de réaction de 3- [(diphénoxyphosphoryl)oxy]phényle triphényle 1,3-phénylène bis(phosphate) et tétraphényle 1,3-phénylène bis(phosphate)

3824999282 80

- - - - - - - Solution de tert-butylchlorodiméthylsilane (CAS RN 18162-48-6) dans du toluène

3824999283 80

- - - - - - - 1-(Cédr-8-én-9-yl)éthanone (CAS RN 32388-55-9) d'une pureté en poids d'au moins 70 %, mais n'excédant pas 90 %

3824999284 80

- - - - - - - Préparation constituée de 83 % ou plus en poids de 3a,4,7,7a-tétrahydro-4,7-méthanoindène (dicyclopentadiène), d'un caoutchouc synthétique, même contenant en poids 7 % ou plus de tricyclopentadiène, et: - soit d'un composé d'aluminium-alkyle, - soit d'un complexe organique de tungstène - soit d'un complexe organique de molybdène

3824999286 80

- - - - - - - Amides gras de tallol, N,N-diméthyle (CAS RN 68308-74-7) d'une pureté en poids de 99 % ou plus

3824999288 80

- - - - - - - 2,4,7,9-Tétraméthyldéc-5-yne-4,7-diol, hydroxyéthylé (CAS RN 9014-85-1)

3824999289 80

- - - - - - - Mélange d'alkyl-diméthylamines (tertiaires) contenant, en poids: — 60 % ou plus, mais pas plus de 80 % de dodécyldiméthylamine (CAS RN 112-18-5), et — 20 % ou plus, mais pas plus de 30 % de diméthyl(tétradécyl)amine (CAS RN 112-75-4)

3824999290 80

- - - - - - - Acide 1,2-benzènedicarboxylique, esters de di-C6-10-alkyle (CAS RN 68515-51-5)

3824999291 80

- - - - - - - 1,2-benzènedicarboxylique, mélange de diesters de décyle, d’hexyle et d’octyle avec ≥ 0,3% de phtalate de dihexyle (CAS RN 68648-93-1)

3824999292 80

- - - - - - - Solution consistant en - 50 (± 2) % en poids de mentholate de sodium (CAS RN 19321-38-1), et - 50 (± 2) % en poids de solvant naphta aliphatique léger (pétrole) (CAS RN 64742-89-8)

3824999294 80

- - - - - - - Acétate de ({[2-(trifluorométhyl)phényl]carbonyl}amino)méthyle (CAS RN 895525-72-1) d'une teneur minimale de 45 % en poids dissous dans du N,N-diméthylacétamide (CAS RN 127-19-5)

3824999295 80

- - - - - - - Solution de cis-1-{[(2,5-diméthylphényl)acétyl]amino}-4-méthoxycyclohexanecarboxylate de méthyle (CAS RN 203313-47-7) dans du N,N-diméthylacétamide (CAS RN 127-19-5), contenant en poids au moins 25 % mais pas plus de 45 % de carboxylate

3824999296 80

- - - - - - - Produits contenant en poids plus de 35 % de résines époxy, également appelées résines époxydes ou polyépoxydes, qui sont des polymères ou prépolymères contenant des groupes époxydes réactifs, à base d’épichlorhydrine («ECH») et d’un composant alcoolique aliphatique ou aromatique (tel que le BPA), présentant tous les types de qualité, de pureté, de poids moléculaire ou de structure moléculaire, contenant ou non des modificateurs, des agents de durcissement ou des additifs, pour autant que ces agents de durcissement n’aient pas réagi chimiquement de façon à durcir la résine époxy ou à la transformer en un produit différent ne contenant plus de groupes époxydes

3824999297 80

- - - - - - - Mélange contenant des bis[3-(triéthoxysilyl)propyl] polysulfures (CAS RN 211519-85-6) d'une pureté en poids de 84 % ou plus

3824999298 80

- - - - - - - Glutamate monosodique, mélangé ou en solution, contenant au moins 50 % de glutamate monosodique en poids sec

3824999299 80

- - - - - - - autres

3824999300 80

- - - - - - autres

3824999310 80

- - - - - - - Produits contenant en poids plus de 35 % de résines époxy, également appelées résines époxydes ou polyépoxydes, qui sont des polymères ou prépolymères contenant des groupes époxydes réactifs, à base d’épichlorhydrine («ECH») et d’un composant alcoolique aliphatique ou aromatique (tel que le BPA), présentant tous les types de qualité, de pureté, de poids moléculaire ou de structure moléculaire, contenant ou non des modificateurs, des agents de durcissement ou des additifs, pour autant que ces agents de durcissement n’aient pas réagi chimiquement de façon à durcir la résine époxy ou à la transformer en un produit différent ne contenant plus de groupes époxydes

3824999320 80

- - - - - - - Préparation contenant de l’hexabromocyclododécane (CAS 25637-99-4 ou 134237-52-8)

3824999330 80

- - - - - - - Mélange en poudre contenant en poids: - 85 % ou plus de diacrylate de zinc (CAS RN 14643-87-9) - et au maximum 5 % de 2,6-di-tert-butyl-alpha-diméthylamino-p-crésol (CAS RN 88-27-7) et - pas plus de 10 % de stéarate de zinc (CAS RN 557-05-1)

3824999331 80

- - - - - - - Masse de réaction d'hydrogénophosphate de dihexadécyle (CAS RN 2197-63-9) et de dihydrogénophosphate d'hexadécyle (CAS RN 3539-43-3)

3824999333 80

- - - - - - - Préparation contenant en poids -60 % ou plus, mais pas plus de 70 % de rel-(1R,2S)-cyclohexane-1,2-dicarboxylate de calcium (CAS RN 491589-22-1), -30 % ou plus, mais pas plus de 40 % de stéarate de zinc (CAS RN 557-05-1), -1 % ou plus, mais pas plus de 5 % de CI Pigment Blue 29 (CAS RN 57455-37-5) et -1 % ou plus, mais pas plus de 5 % de CI Pigment Violet 15 (CAS RN 12769-96-9)

3824999335 80

- - - - - - - Paraffine présentant un degré de chloration égal ou supérieur à 70 % (CAS RN 63449-39-8)

3824999336 80

- - - - - - - Préparation contenant en poids 60 % ou plus, mais pas plus de 70 % de rel-(1R,2S)-cyclohexane-1,2-dicarboxylate de calcium (CAS RN 491589-22-1) et 30 % ou plus, mais pas plus de 40 % de stéarate de zinc (CAS RN 557-05-1)

3824999340 80

- - - - - - - Préparation anti-corrosion constituée de sels d'acide dinonylnaphtalènesulfonique présentés: - sur un support de cire minérale, même modifiée chimiquement ou - sous forme de solution dans un solvant organique

3824999342 80

- - - - - - - Mélange de bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulfone, diphenyltolyl-2,4-dicarbamate et 1-[4-(4-aminobenzolsulfonyl)-phényl]-3-(3-phenoxycarbonylamino-tolyl)-urée

3824999345 80

- - - - - - - Hydrogéno-3-aminonaphtalène-1,5-disulfonate de sodium (CAS RN 4681-22-5) contenant en poids: - pas plus de 20 % de sulfate de disodium, et - pas plus de 10 % de chlorure de sodium

3824999348 80

- - - - - - - Retardateur de flamme non halogéné contenant, en poids: -50 % ou plus mais pas plus de 65 % de pyrophosphate de pipérazine (CAS RN 66034-17-1), -35 % ou plus mais pas plus de 45 % d'un dérivé de l'acide phosphorique, et -pas plus 6 % d'oxyde de zinc (CAS RN 1314-13-2)

3824999353 80

- - - - - - - Diméthacrylate de zinc (CAS RN 13189-00-9), contenant au maximum 2,5 %, en poids, de 2,6-di-tert-butyl-alpha-diméthylamino-p-crésol (CAS RN 88-27-7), sous forme de poudre

3824999361 80

- - - - - - - Disodium 7,7'-(carbonyldiimino)bis(4-hydroxynaphthalène-2-sulphonate) (CAS RN 20324-87-2) d'une pureté en poids de 80 % ou plus

3824999363 80

- - - - - - - Mélanges de stérols végétaux, présentés autrement qu'en poudre, contenant en poids: - 75 % minimum de stérols, - mais 25 % maximum de stanols, utilisés pour la fabricationde stanols/stérols ou d'esters de stanols/stérols

3824999365 80

- - - - - - - Masse réactive de 1,1'-(isopropylidène)bis[3,5-dibromo-4-(2,3-dibromo-2-méthylpropoxy)benzène] (CAS RN 97416-84-7) et de 1,3-dibromo-2-(2,3-dibromo-2-méthylpropoxy)-5-{2-[3,5-dibromo-4-(2,3,3-tribromo-2-méthylpropoxy)phényl]propan-2-yl}benzène

3824999367 80

- - - - - - - Mélanges de stérols végétaux, sous forme de poudre, contenant en poids: - 75% minimum de stérols, - mais 25% maximum de stanols, utilisés pour la fabrication de stanols/stérols ou d'esters de stanols/stérols

3824999374 80

- - - - - - - 1,3-Propanediamine, N1,N1'-1,2-éthanediylbis-, produits de réaction avec le cyclohexane et la N-butyl-2,2,6,6-tétraméthyl-4-pipéridinamine-2,4,6-trichloro-1,3,5-triazine peroxydée (CAS RN 191680-81-6)

3824999388 80

- - - - - - - Mélange de phytostérols, contenant en poids: - 60 % ou plus mais pas plus de 80 % de sitostérols, - pas plus de 15 % de campestérols, - pas plus de 5 % de stigmastérols, - pas plus de 15 % de betasitostanols

3824999389 80

- - - - - - - Glutamate monosodique, mélangé ou en solution, contenant au moins 50 % de glutamate monosodique en poids sec

3824999390 80

- - - - - - - autres

3824999600 80

- - - - - autres

3824999630 80

- - - - - - Concentré de terres rares contenant, en poids: - 20 % ou plus mais pas plus de 30 %, d'oxyde de cérium (CAS RN 1306-38-3), - 2 % ou plus mais pas plus de 10 %, d'oxyde de lanthane (CAS RN 1312-81-8), - 10 % ou plus mais pas plus de 15 %, d'oxyde d'yttrium (CAS RN 1314-36-9), et - pas plus de 65 % d'oxyde de zirconium (CAS RN 1314-23-4), y compris l'oxyde d'hafnium naturel

3824999635 80

- - - - - - Bauxite calcinée (réfractaire)

3824999637 80

- - - - - - Silicoaluminophosphate structuré

3824999638 80

- - - - - - Pâte silicone thermoconductrice à faible dégazage : -d'une conductivité thermique après durcissement de 3,45 W/(m K) ou plus mais n'excédant pas 3,55 W/(m K), -d'une température d'utilisation continue minimale comprise entre −60 °C et 200 °C, -d'une capacité calorifique après durcissement de 0,75 J/(g K) ou plus mais pas plus de 0,85 J/(g K), -présentant une résistivité volumique après durcissement de 1010 Ω m ou plus, -conditionnée dans des contenants de 30 kg ou plus

3824999640 80

- - - - - - Préparation anti-corrosion constituée de sels d'acide dinonylnaphtalènesulfonique présentés: - sur un support de cire minérale, même modifiée chimiquement ou - sous forme de solution dans un solvant organique

3824999643 80

- - - - - - Gel de silice fonctionnalisé de 2-(éthylthio)éthanéthiol d'une pureté en poids de 98 % ou plus

3824999645 80

- - - - - - Poudre d'oxyde de lithium-nickel-cobalt-aluminium (CAS RN 177997-13-6) présentant les caractéristiques suivantes: -une taille des particules inférieure à 10 μm -une pureté en poids supérieure à 98 %

3824999646 80

- - - - - - Granulat de manganèse-zinc-ferrite, contenant en poids: - 52 % ou plus mais pas plus de 76 % d'oxyde de fer (III), - 13 % ou plus mais pas plus de 42 % d'oxyde de manganèse (II) et - 2 % ou plus mais pas plus de 22 % d'oxyde de zinc

3824999647 80

- - - - - - Mélange d'oxydes de métaux, sous forme de poudre, contenant en poids: - soit 5 % ou plus de baryum, de néodyme ou de magnésium et 15 % ou plus de titane, - soit 30 % ou plus de plomb et 5 % ou plus de niobium, destiné à être utilisé dans la fabrication de films diélectriques ou destiné à être utilisé comme matériaux diélectriques dans la fabrication de condensateurs multicouches en céramique

3824999648 80

- - - - - - Oxyde de zirconium (ZrO@2), stabilisé par de l'oxyde de calcium (numéro CAS 68937-53-1) d'une teneur en poids d'oxyde de zirconium de 92 % ou plus mais n'excédant pas 97 %

3824999650 80

- - - - - - Hydroxyde de nickel dopé avec au minimum 12 % et au maximum 18 % en poids d'hydroxyde de zinc et d'hydroxyde de cobalt, du type utilisé pour la fabrication d'électrodes positives pour accumulateurs

3824999653 80

- - - - - - Concentré de terres rares contenant en poids 60 % ou plus mais pas plus de 95 % d'oxydes de terres rares et pas plus de 1 % chacun d'oxyde de zirconium, d'oxyde d'aluminium ou d'oxyde de fer, et ayant une perte par calcination de 5 % ou plus en poids

3824999655 80

- - - - - - Carrier, sous forme de poudre, constitué de : - Ferrite (oxyde de fer) (CAS RN 1309-37-1) - Oxyde de manganèse (CAS RN 1344-43-0) - Oxyde de magnésium (CAS RN 1309-48-4) - Styrène acrylate copolymère destiné à être mélangé à du toner sous forme de poudre, dans la fabrication de bouteilles ou cartouches d'encre/de toner pour télécopieurs, imprimantes d'ordinateurs ou pour photocopieurs

3824999657 80

- - - - - - Particules de dioxyde de silicium sur lesquelles sont liés de manière covalente des composés organiques, destinées à être utilisées dans la fabrication de colonnes de chromatographie liquide à haute performance (HPLC) et de cartouches de préparation d'échantillon

3824999660 80

- - - - - - Magnésie électrofondue contenant au moins 15 % en poids de trioxyde de dichrome

3824999662 80

- - - - - - Préparation visqueuse contenant essentiellement : -plus de 5 % mais pas plus de 15 % en poids d'alcool polyvinylique (CAS RN 9002-89-5), -plus de 10 % mais pas plus de 20 % en poids de 1-méthoxy-2-propanol (CAS RN 107-98-2), -de l'eau,  destiné à être utilisé comme revêtement de protection pour les plaquettes pendant le processus de tranchage dans la fabrication de semi-conducteurs

3824999665 80

- - - - - - Silicate d'aluminium et de sodium, sous forme de sphères d'un diamètre de: - soit 1,6 mm ou plus mais n'excédant pas 3,4 mm, - soit 4 mm ou plus mais n'excédant pas 6 mm

3824999666 80

- - - - - - Agent de vulcanisation contenant en poids: -78 % ou plus mais pas plus de 82 % de soufre insoluble (CAS RN 9035-99-8), -18 % ou plus mais pas plus de 22 % d'huile naphténique (CAS RN 64742-52-5), et -pas plus de 0,2 % de méthylstyrène (CAS RN 98-83-9)

3824999668 80

- - - - - - Dioxyde de lithium et de nickel (CAS RN 12325-84-7) contenant en poids: -moins de 5 % d'hydroxyde de lithium (CAS RN 1310-65-2), - moins de 5 % de carbonate de lithium (CAS RN 554-13-2), et - moins de 15 % d'oxyde de nickel (CAS RN 11099-02-8)

3824999673 80

- - - - - - Produit de réaction, contenant en poids: - 1 % ou plus mais pas plus de 40 % d'oxyde de molybdène, - 10 % ou plus mais pas plus de 50 % d'oxyde de nickel, - 30 % ou plus mais pas plus de 70 % d'oxyde de tungstène

3824999674 80

- - - - - - Mélange de composition non stœchiométrique: - à structure cristalline, - principalement à base de spinelle d'aluminate de magnésium et d'adjuvants des phases de silicate et d'aluminates, dont 75 % du poids au moins se situe dans la fraction granulométrique comprise entre 1 et 3 mm et dont 25 % au plus se situe dans la fraction granulométrique comprise entre 0 et 1 mm

3824999678 80

- - - - - - Oxyde de zirconium stabilisé avec de l'oxyde d'yttrium (CAS RN 64417-98-7) contenant en poids 90 % ou plus d'oxyde de zirconium

3824999680 80

- - - - - - Mélange composé de - 64 % en poids ou plus, mais n'excédant pas 74 % en poids de silice amorphe (CAS RN 7631-86-9) - 25 % en poids ou plus, mais n'excédant pas 35 % en poids de butanone (CAS RN 78-93-3) et - pas plus de 1 % en poids de 3-(2,3-époxypropoxy)propyltriméthoxysilane (CAS RN 2530-83-8)

3824999683 80

- - - - - - Nitrure de bore cubique (CAS RN 10043-11-5) revêtu de nickel et/ou de phosphure de nickel (CAS RN 12035-64-2)

3824999687 80

- - - - - - Oxyde de platine (CAS RN 12035-82-4) fixé sur un support poreux en oxyde d'aluminium (CAS RN 1344-28-1), contenant en poids: - 0,1 % ou plus mais pas plus de 1 % de platine, et - 0,5 % ou plus mais pas plus de 5 % de dichlorure d'éthylaluminium (CAS RN 563-43-9)

3824999689 80

- - - - - - Glutamate monosodique, mélangé ou en solution, contenant au moins 50 % de glutamate monosodique en poids sec

3824999691 80

- - - - - - Mélange, sous forme de granulés, contenant en poids: - 49 % ou plus mais pas plus de 50 % de polysulfures, bis[3-(triéthoxysilyl)propyl] (CAS RN 211519-85-6), et - 50 % ou plus mais pas plus de 51 % de noir de carbone (CAS RN 1333-86-4), dont le taux de passage dans une ouverture de maille de 0,60 mm est égal à 75 % ou plus en poids, mais dont le taux de passage dans une ouverture de maille de 0,25 mm n’excède pas 10 % (conformément à la méthode ASTM D1511)

3824999699 80

- - - - - - autres