Nouveau Décrivez un produit, obtenez le code NC. Aussi en API et MCP pour les agents IA. Essai gratuit
Aller au contenu

Numéro tarifaire 7318000000 80 - Vis, boulons, écrous, tire-fond, crochets à pas de vis, rivets, goupilles, clavettes, rondelles (y compris les rondelles destinées à faire ressort) et articles similaires, en fonte, fer ou acier

M’alerter par e-mail

Restrictions commerciales pour l'importation de marchandises pour 7318000000 80

Cette table contient des informations sur les restrictions commerciales pour l'importation de marchandises dans l'UE et l'UE dans les pays tiers. Le tableau contient des informations sur les les restrictions commerciales dues à des unions douanières, des préférences, des quotas tarifaires, les unions douanières, les contrôles vétérinaires, les droits de douane des pays tiers et les quotas tarifaires non préférentiels quotas.

Droits 67
FO
Faroe Islands FO
01-01-1997
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-01-2005
3.7 %
Droit des pays tiers 103
SM
San Marino SM
01-01-2006
0 %
Droit de l'union douanière 106
TR
Türkiye TR
01-01-2006
0 %
Droit de l'union douanière 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Préférence tarifaire 142
BA
Bosnia and Herzegovina BA
01-01-2009
0 %
Préférence tarifaire 142
MK
North Macedonia MK
01-01-2009
0 %
Préférence tarifaire 142
UA
Ukraine UA
01-01-2016
0 %
Préférence tarifaire 142
EC
Ecuador EC
01-01-2017
0 %
Préférence tarifaire 142
2020
GSP - General arrangements 2020
01-01-2017
0 %
Préférence tarifaire 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Préférence tarifaire 142
XS
Serbia XS
01-02-2010
0 %
Préférence tarifaire 142
JP
Japan JP
01-02-2020
0 %
Préférence tarifaire 142
PE
Peru PE
01-03-2013
0 %
Préférence tarifaire 142
AL
Albania AL
01-04-2009
0 %
Préférence tarifaire 142
XK
Kosovo XK
01-04-2016
0 %
Préférence tarifaire 142
ME
Montenegro ME
01-05-2010
0 %
Préférence tarifaire 142
NZ
New Zealand NZ
01-05-2024
0 %
Préférence tarifaire 142
SY
Syria SY
01-08-1994
0 %
Préférence tarifaire 142
VN
Viet Nam VN
01-08-2020
0 %
Préférence tarifaire 142
GE
Georgia GE
01-09-2014
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Suspension tarifaire de la conformité aérienne 119
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
ZA
South Africa ZA
10-10-2016
0 %
Préférence tarifaire 142
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Préférence tarifaire 142
CH
Switzerland CH
20-12-1972
0 %
Préférence tarifaire 142
CA
Canada CA
21-09-2017
0 %
Préférence tarifaire 142
1006
EU-Canada agreement: re-imported goods 1006
21-09-2017
0 %
Préférence tarifaire 142
AD
Andorra AD
01-01-2006
0 %
Droit de l'union douanière 106
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Préférence tarifaire 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Préférence tarifaire 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Préférence tarifaire 142
GB
United Kingdom GB
01-01-2021
0 %
Préférence tarifaire 142
GH
Ghana GH
01-01-2027
0 %
Préférence tarifaire 142
SG
Singapore SG
01-01-2027
0 %
Préférence tarifaire 142
CL
Chile CL
01-02-2025
0 %
Préférence tarifaire 142
TN
Tunisia TN
01-03-1998
0 %
Préférence tarifaire 142
MA
Morocco MA
01-03-2000
0 %
Préférence tarifaire 142
LB
Lebanon LB
01-04-2006
0 %
Préférence tarifaire 142
JO
Jordan JO
01-05-2002
0 %
Préférence tarifaire 142
EG
Egypt EG
01-06-2004
0 %
Préférence tarifaire 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Préférence tarifaire 142
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Préférence tarifaire 142
MX
Mexico MX
01-07-2016
0 %
Préférence tarifaire 142
KE
Kenya KE
01-07-2024
0 %
Préférence tarifaire 142
US
United States US
01-07-2026
0 %
Préférence tarifaire 142
2200
Central America 2200
01-08-2013
0 %
Préférence tarifaire 142
CO
Colombia CO
01-08-2013
0 %
Préférence tarifaire 142
DZ
Algeria DZ
01-09-2005
0 %
Préférence tarifaire 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
CI
Ivory Coast CI
02-12-2019
0 %
Préférence tarifaire 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Préférence tarifaire 142
CM
Cameroon CM
04-08-2014
0 %
Préférence tarifaire 142
BY
Belarus BY
05-06-2022
Interdiction d'importation 277
XL
Melilla XL
07-12-2003
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
XC
Ceuta XC
07-12-2003
0 %
Acte d'adhésion0001/85
Préférence tarifaire 142
PS
Occupied palestinian Territory PS
07-12-2003
0 %
Préférence tarifaire 142
1035
SADC EPA 1035
10-10-2016
0 %
Préférence tarifaire 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Préférence tarifaire 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Préférence tarifaire 142
IL
Israel IL
16-05-2023
0 %
Préférence tarifaire 142
SB
Solomon Islands SB
17-05-2020
0 %
Préférence tarifaire 142
PG
Papua New Guinea PG
20-12-2009
0 %
Préférence tarifaire 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Préférence tarifaire 142
FJ
Fiji FJ
28-07-2014
0 %
Préférence tarifaire 142
1033
CARIFORUM 1033
29-12-2008
0 %
Préférence tarifaire 142
WS
Samoa WS
31-12-2018
0 %
Préférence tarifaire 142
Contrôles et documents 5
1008
All third countries 1008
01-01-2026
– 31-12-2026
Document requis
interdit sans document
Carbon Border Adjustment Mechanism - CBAM 775
RU
Russian Federation RU
19-12-2023
– 31-12-2027
Document requis
interdit sans document
Contrôle à l'importation 763
1008
All third countries 1008
19-12-2023
– 31-12-2027
Document requis
interdit sans document
Contrôle à l'importation 763
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 762
UA
Ukraine UA
24-06-2026
Document requis
interdit sans document
Contrôle à l'importation 760

Explication des restrictions commerciales

Erga Omnes signifie "pour tous".

Les pays tiers sont des pays qui n'appartiennent pas à l'UE.

Le SPG signifie 'Système de préférences généralisées'.

Le SPG+ signifie 'Système de préférences généralisées Plus'.

European Economic Area (EEA) signifie tous les États membres de l'UE et l'Islande, le Liechtenstein et la Norvège.

Les PTOM sont des "Pays et territoires d'outre-mer". Ils ne sont pas membres de l'UE. Plus d'informations

'CARIFORUM est une organisation régionale d'intégration économique comprenant 15 États membres de la Communauté des Caraïbes (CARICOM) et la République dominicaine.'

'L'APE SADC signifie "Southern African Development Community - Economic Partnership Agreement" (Accord de partenariat économique).'

Droit signifie "droit de douane".

Estimer le coût d’importation pour 7318000000

  • Valeur en douane 1 000,00 €
  • Droit de douane 3,7 % 37,00 €
  • TVA à l’importation 20 % 207,40 €
  • Total 1 244,40 €

Peut être inférieur sous conditions :

  • Airworthiness tariff suspension: 0 %

Documents et contrôles pour Chine

Simple estimation. La valeur en douane est le prix incluant le transport et l’assurance jusqu’à la frontière de l’UE. Les accises, autres redevances et droits antidumping propres à un producteur ne sont pas inclus. Les taux préférentiels exigent une preuve d’origine valable. Groupes de pays et exclusions : TARIC, au novembre 2026.

Mesures à l’exportation pour 7318000000

Ce qui s’applique quand ces marchandises quittent l’UE : contrôles à l’exportation, autorisations (biens à double usage et autres), interdictions par destination et unité supplémentaire de la déclaration d’exportation.

Mesures 1
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Export prohibition 278
Contrôles et documents 4
BY
Belarus BY
24-04-2026
Document requis
interdit sans document
Export control 766
RU
Russian Federation RU
26-07-2026
Document requis
interdit sans document
Export control 709
UA
Ukraine UA
25-02-2025
Document requis
interdit sans document
Export control 709
UA
Ukraine UA
25-08-2022
Document requis
interdit sans document
Export control 767

Historique

Taux de droit et mesures pour ce code dans le temps (versions annuelles).

Règles d’origine préférentielles pour 7318000000

Ce que la marchandise doit remplir pour être originaire d’un pays partenaire et bénéficier du droit préférentiel, par accord. Texte des accords en anglais.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chili

    EU-Algeria Association Agreement · Algérie

    EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Îles Féroé, Liechtenstein, Norvège, Suisse

    EU-Egypt Association Agreement · Égypte

    EU-Georgia DCFTA · Géorgie

    Generalised Scheme of Preferences (GSP, GSP+, EBA) · Arménie, Îles Salomon, Inde, Kenya, Pakistan, Samoa, Syrie, Viêt Nam

    EU-Iceland FTA · Islande

    EU-Jordan Association Agreement · Jordanie

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanie

    EU-Korea FTA · Corée du Sud

    EU-Central America Association Agreement

    EU-Lebanon Association Agreement · Liban

    EU-Morocco Association Agreement · Maroc

    EU-Moldova DCFTA · Moldavie

    Pan-Euro-Mediterranean (PEM) Convention · Albanie, Andorre, Bosnie-Herzégovine, Égypte, Îles Féroé, Islande, Kosovo, Liechtenstein, Macédoine du Nord, Monténégro, Norvège, Palestine, Suisse, Turquie

    EU-Singapore FTA · Singapour

    EU-Tunisia Association Agreement · Tunisie

    EU-Ukraine DCFTA · Ukraine

    Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product

  • EPA CARIFORUM

    EU Market Access Regulation (EPA) · Cameroun, Côte d’Ivoire, Ghana, Kenya

    EPA Pacific · Fidji, Îles Salomon, Papouasie-Nouvelle-Guinée, Samoa

    EU-Mexico Global Agreement · Mexique

    EU-Palestine Interim Association Agreement · Palestine

    EPA SADC · Afrique du Sud

    Articles of iron or steel; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product

  • EU-Canada CETA · Canada

    A change from any other heading.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombie, Équateur, Pérou

    Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product [95]

  • EPA Eastern and Southern Africa

    Sheet piling / or: Manufacture from materials of heading No 7206

  • EU-Japan EPA · Japon

    CTH

  • EU-Viet Nam FTA · Viêt Nam

    Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product.

Source : Commission européenne, Access2Markets (CC BY 4.0, abrégé). Seul le texte de l’accord fait foi. Access2Markets

Notes légales et notes explicatives pour 7318000000

7318 11 00 Notes explicatives de la nomenclature combinée: Tire-fonds

Les tire-fonds sont un type particulier de vis à bois non fendues, à tête hexagonale ou carrée, qui peuvent avoir une embase fixe. On distingue deux types de tire fonds: — les vis utilisées pour fixer les voies ferrées aux traverses de bois qui sont, en principe, de grosses vis à bois (voir exemple A), — les vis utilisées pour assembler des chevrons et pour d'importants ouvrages de menuiserie similaires qui, au vu de leur usage, ont un diamètre de tige supérieur à 5 mm (voir exemple B). Exemple A Exemple B

7318 14 91 Notes explicatives de la nomenclature combinée: Vis à tôles

Relèvent de cette sous-position les vis trempées à tête et filetage de fixation (filetage triangulaire) destinées à être tirefonnées (enfoncées) dans la tôle. Leur filetage n'est pas à pas métrique et s'étend de la tige jusqu'à la tête. L'extrémité de la tige peut être de forme pointue ou en téton. Elles ont par exemple l'aspect suivant:

7318 15 20 Notes explicatives de la nomenclature combinée: pour la fixation des éléments de voies ferrées

Relèvent notamment de cette sous-position: 1. les boulons à tête de crapaud, qui ont généralement une tête carrée ou trapézoïdale avec ou sans carré sous la tête. Ces boulons sont utilisés sur les traverses métalliques; 2. les boulons d'éclisse, qui ont généralement une tête carrée ou ronde et une partie ovale sous la tête. Ces boulons servent à relier les rails entre eux; 3. les autres boulons pour la fixation des éléments de voies ferrées, qui sont généralement fournis avec l'écrou vissé. L'épaisseur de tige est de 18 millimètres ou plus.

7318 15 95 Notes explicatives de la nomenclature combinée: autres

Rentrent par exemple dans la présente sous-position les vis et boulons à tête à quatre pans creux, à tête carrée, octogonale ou triangulaire, les vis à tête ronde en différentes fabrications, par exemple:

7318 16 92 Notes explicatives de la nomenclature combinée: et 7318 16 99

autres, d'un diamètre intérieur Le diamètre intérieur doit être mesuré sur la partie intérieure du filetage. Pour les vis et boulons, il doit par contre l'être sur la partie extérieure du filetage.

7318 16 99 Notes explicatives de la nomenclature combinée: et 7318 16 99

autres, d'un diamètre intérieur Le diamètre intérieur doit être mesuré sur la partie intérieure du filetage. Pour les vis et boulons, il doit par contre l'être sur la partie extérieure du filetage.

7318 15 35 - 7318 15 48 Notes explicatives de la nomenclature combinée: à 7318 15 48

sans tête Relèvent de ces sous-positions les produits à entraînement/encoche interne ou externe, par exemple, avec une empreinte en forme d’étoile à six branches, mais sans tête dépassant de la tige. Relèvent de ces sous-positions les produits qui peuvent, par exemple, prendre les formes suivantes:

7318 15 52 - 7318 15 95 Notes explicatives de la nomenclature combinée: à 7318 15 95

avec tête Relèvent de ces sous-positions les vis et boulons avec tête dépassant de la tige.

Notes du chapitre 73

Notes 1. Dans ce chapitre, on entend par «fontes» les produits obtenus par moulage dans lesquels le fer prédomine en poids sur chacun des autres éléments et qui ne répondent pas à la composition chimique des aciers visés à la note 1, point d), du chapitre 72. 2. Aux fins du présent chapitre, le terme «fils» s'entend des produits obtenus à chaud ou à froid dont la coupe transversale, de forme quelconque, n'excède pas 16 millimètres dans sa plus grande dimension.

Sources : nomenclature combinée 2026, annexe I du règlement (CEE) nº 2658/87 (CELEX 32025R1926), et notes explicatives de la nomenclature combinée (CELEX 02019XC0329(02)-20260213). Les notes de section et de chapitre ont force juridique ; les notes explicatives sont une aide à l’interprétation. EUR-Lex

Règlements de classement de l’UE pour 7318000000

Règlements de la Commission qui ont classé des marchandises précises sous ce code. Ils lient les douanes de tous les États membres pour des marchandises identiques.

  • 7318 12 10 11 juin 2013 · Règlement sur EUR-Lex
    Vis en acier inoxydable, mesurant environ 2 cm.

    La tête de la vis comprend une empreinte creuse. La tige présente un filetage partiel et régulier. L’extrémité pointue comporte une encoche, mais elle n’est pas fendue. L’article est destiné à être utilisé pour le bois et les panneaux en bois. (*1) Voir l’image.

    Motifs

    Le classement est déterminé par les règles générales 1 et 6 pour l’interprétation de la nomenclature combinée et par le libellé des codes NC 7318 , 7318 12 et 7318 12 10 . Compte tenu de ses caractéristiques (tige partiellement filetée, encoche sur l’extrémité pointue et aucune fente), l’article est spécialement conçu comme vis auto-foreuse pour le bois. L’article est donc assimilé à une vis à bois relevant de la sous-position tarifaire 7318 12 . Il convient dès lors de classer l’article sous le code NC 7318 12 10 en tant que vis à bois en acier inoxydable.

  • 7318 15 42 23 juil. 2026 · Règlement sur EUR-Lex
    Tiges filetées galvanisées en aciers autres qu’inoxydables, présentant un filetage métrique sur toute leur longueur, sans tête ni cavité, d’une résistance à la traction de moins de 800 MPa, de différentes longueurs (entre 1 000 et 3 000 mm) et de diamètres différents (entre 4 et 36 mm).

    Elles sont présentées sans écrous, rondelles ou éléments similaires. Les articles sont utilisés pour l’assemblage, la suspension ou la fixation d’un large éventail d’équipements et de composants. Voir les images (*1)

    Motifs

    Le classement est déterminé par les règles générales 1 et 6 pour l’interprétation de la nomenclature combinée, par la note 1 d) du chapitre 72 et par le libellé des codes NC 7318 , 7318 15 et 7318 15 42 . Étant donné que l’article est fileté et utilisé pour assembler ou fixer des marchandises de manière qu’elles puissent être aisément dissociées sans être endommagées [voir également les notes explicatives du système harmonisé (NESH) relatives à la position 7318, A), premier paragraphe], il présente les caractéristiques objectives d’un article de la sous-position 7318 15 [tiges cylindriques filetées; voir également les NESH relatives à la position 7318, A), troisième paragraphe]. Par conséquent, le classement sous le code NC 7318 19 00 en tant qu’autres articles filetés est exclu. Il convient dès lors de classer les articles sous le code NC 7318 15 42 en tant qu’autres vis et boulons sans tête, en aciers autres qu’inoxydables, d’une résistance à la traction de moins de 800 MPa.

  • 7318 15 95 20 juin 2019 · Règlement sur EUR-Lex
    Un goujon autosertissable en acier. Il se compose d'une tige filetée et d'une tête ronde, plate et lisse avec un moletage sous-jacent. Il peut avoir différentes dimensions.

    L'article est destiné à être installé sur des tôles métalliques de faible épaisseur au moyen d'une presse hydraulique ou pneumatique. La tête se maintient exactement au niveau de la tôle tandis que la partie filetée reste perpendiculaire à celle-ci. Un filetage extérieur est donc créé, permettant à la tôle d'être assemblée, au moyen d'un écrou supplémentaire et de façon réversible, à un autre élément qui peut être détaché en le dévissant. (*1) Voir l'image.

    Motifs

    Le classement est déterminé par les règles générales 1 et 6 pour l'interprétation de la nomenclature combinée et par le libellé des codes NC 7318 , 7318 15 et 7318 15 95 . L'article est fileté et utilisé pour assembler ou fixer des marchandises de manière à ce qu'elles puissent être aisément dissociées sans être endommagées. Il présente les caractéristiques objectives d'une vis de la position 7318 . En conséquence, un classement sous le code NC 7318 19 00 en tant qu'autre article fileté est exclu (voir également les notes explicatives du système harmonisé relatives à la position 7318 , A). Il convient dès lors de le classer sous le code NC 7318 15 95 en tant qu'autre vis en acier.

+ 3 de plus
  • 7318 16 39 9 avr. 2019 · Règlement sur EUR-Lex
    Article fileté en aciers inoxydables avec filetage intérieur. Il se présente sous la forme d'un écrou avec une bride à une extrémité.

    L'article est conçu pour être utilisé dans le montage de la tuyauterie du système de freinage hydraulique d'un véhicule à moteur. L'article, une fois serré, permet aux éléments du joint de raccordement de se positionner correctement, maintenant ainsi en place le joint hydraulique. Voir les images (*1).

    Motifs

    Le classement est déterminé par les règles générales (RGI) 1 et 6 pour l'interprétation de la nomenclature combinée et par le libellé des codes NC 7318 , 7318 16 et 7318 16 39 . L'article présente les caractéristiques objectives des «articles filetés» classés dans la position 7318 . Un classement dans la position 7307 en tant qu'accessoire de tuyauterie est exclu, l'article n'exerçant qu'une pression sur les éléments qui forment la jonction dans le joint et n'étant pas en contact avec le liquide transporté via la conduite. Le filetage intérieur de l'article n'est pas conçu pour former ou maintenir un joint hydraulique. L'article ne peut pas être classé en tant qu'accessoire/raccord non fini en vertu de la RGI 2 a) pour l'interprétation de la nomenclature combinée car il ne présente pas le caractère essentiel d'un accessoire/raccord fini. Les simples articles de boulonnerie et de visserie (autres que les articles filetés énumérés dans la position considérée) susceptibles d'entrer dans le montage des éléments de tuyauterie sont exclus de la position 7307 [voir également les notes explicatives du système harmonisé relatives à la position 7307 , exclusions, point b)]. Il convient donc de classer l'article sous le code NC 7318 16 39 en tant qu'autre écrou en aciers inoxydables.

  • 7318 19 00 12 juin 2014 · Règlement sur EUR-Lex
    Produit en acier dont le corps est en partie fileté et en partie revêtu de plastique. Il comporte une tête pourvue d'une fente de vissage cruciforme. Son extrémité n'est ni conique ni pointue. Il mesure environ 45 mm de long et présente un diamètre extérieur d'environ 7 mm.

    Ce produit est destiné à faire partie d'un élément de garniture pour meubles. L'extrémité filetée du produit doit être vissée dans un trou préforé dans une partie du meuble. La tête doit être insérée dans un trou préforé dans une autre partie du meuble. Les deux parties du meuble sont assemblées par emboîtement de la tête dans la fente de l'autre élément de la garniture (non incluse lors de la présentation). (*1) Voir l'image.

    Motifs

    Le classement est déterminé par les dispositions des règles générales 1, 3 b) et 6 pour l'interprétation de la nomenclature combinée, par la note 1 du chapitre 83 et par le libellé des codes NC 7318 et 7318 19 00 . Le produit est un ouvrage composé de deux matières. Il doit être classé en fonction de la matière qui lui confère son caractère essentiel (métal). Un classement dans la position 8302 en tant que garniture en métaux communs pour meubles est exclu étant donné que le produit n'est qu'un élément de la garniture complète et présente les caractéristiques d'un article fileté de la position 7318 (voir la note 1 du chapitre 83). Le produit n'est pas considéré comme une vis de la position 7318 , car il ne permet pas à lui seul de fixer ou d'assembler des ouvrages. Seule l'extrémité filetée est vissée, l'autre extrémité est quant à elle emboîtée dans la fente de l'autre élément de la garniture. En conséquence, un classement sous les codes NC 7318 12 , 7318 14 ou 7318 15 est exclu. Il convient dès lors de classer l'article sous le code NC 7318 19 00 en tant qu'autre ouvrage en acier.

  • 7318 19 00 20 juin 2011 · Règlement sur EUR-Lex
    Un produit comprenant un boulon avec une rondelle, un manchon d'ancrage expansible et un écrou, tous en acier inoxydable.

    Le boulon a une tête hexagonale, mesure 55 mm de long, est entièrement fileté et a une résistance à la traction de 490 MPa. Le manchon d'ancrage mesure 42 mm de long, avec un diamètre externe de 10 mm lorsqu'il n'est pas expansé. Il n'est pas fileté. Le produit est utilisé pour fixer des articles sur une surface dure, telle qu'un mur en béton, en insérant d'abord le manchon d'ancrage, avec l'écrou à l'intérieur, dans un trou foré, puis en insérant et vissant le boulon. Lorsque le boulon est vissé, l'écrou est repoussé vers la tête du boulon, ce qui provoque l'expansion du manchon d'ancrage, fixant l'article solidement à la surface dure.

    Motifs

    Le classement est déterminé par les dispositions des règles générales (RGI) 1 et 6 pour l'interprétation de la nomenclature combinée, ainsi que par le libellé des codes NC 7318 et 7318 19 00 . Le produit n'est pas un article composite au sens de la RGI 3b), les éléments individuels, une fois assemblés constituant un produit unique, à savoir un boulon expansible. Le classement d'après l'article qui confère au produit son caractère essentiel est par conséquent exclu. Le classement dans la sous-position 7318 15 comme boulon, avec ou sans ses écrous et rondelles, est exclu car le manchon d'ancrage n'est ni un écrou ni une rondelle. Compte tenu de ses caractéristiques, le produit doit donc être classé dans la position NC 7318 19 00 , comme autres articles filetés.

Renseignements tarifaires du Royaume-Uni pour 7318000000

Décisions de HM Revenue & Customs pour des marchandises dont le code britannique commence comme ce code de l’UE. Le tarif britannique diffère de celui de l’UE : ces décisions ne sont qu’une indication pour l’UE.

  • UK 7318121090 Valable du 22 mars 2024 au 21 mars 2027 · Décision 600010150 sur GOV.UK

    The coloured cladding screws are made from stainless steel. They are designed to be used with wood,plastic composite cladding. They are threaded with a torx head. The screw dimensions are 4mm x 35mm. Packaged in a box – each box contains 100 screws

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - has been used to identify the type of packaging - packaged in a cardboard box. GIR 6 - has been used to classify the goods to subheading level 731812 - Other Wood screws 8 Digit Code - 73181210 - Other wood screws - Of Stainless Steel 10 Digit Code - 7318121090 - Other than for use in certain types of aircraft. Also classified in accordance with: Note 3 to Section XV …

  • UK 7318121090 Valable du 22 mars 2024 au 21 mars 2027 · Décision 600010151 sur GOV.UK

    Stainless steel screws that offer a secure solution to fixing wood, plastic composite decking boards. Ideal for fixing risers in steps and fixing the final board of your project. The decking screws come in 5 different colours to match your decking boards and guarantee a discreet fixing. Screw dimensions: 5mm x 50mm Each pack contains 100 screws and come packaged in a cardboard box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - has been used to identify the type of packaging - packaged in a cardboard box. GIR 6 - has been used to classify the goods to subheading level 731812 - Other Wood screws 8 Digit Code - 73181210 - Other wood screws - Of Stainless Steel 10 Digit Code - 7318121090 - Other than for use in certain types of aircraft. Also classified in accordance with: Note 3 to Section XV …

  • UK 7318121090 Valable du 22 mars 2024 au 21 mars 2027 · Décision 600010152 sur GOV.UK

    Stainless steel trim screws for fixing corner and skirting trims to decking. The screw is threaded and with a Torx head design. The Trim screws come in 5 different colours to match the decking and gives a secure and clean look when in place. Screw dimensions: 4mm x 35mm. Each pack contains 100 screws and come packaged in a cardboard box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - has been used to identify the type of packaging - packaged in a cardboard box. GIR 6 - has been used to classify the goods to subheading level 731812 - Other Wood screws 8 Digit Code - 73181210 - Other wood screws - Of Stainless Steel 10 Digit Code - 7318121090 - Other than for use in certain types of aircraft. Also classified in accordance with: Note 3 to Section XV …

+ 18 de plus
  • UK 7318149990 Valable du 17 févr. 2025 au 16 févr. 2028 · Décision 600012141 sur GOV.UK

    The product is a self-tapping threaded screw, material is steel cast zinc alloy finish with a self-drilling plug. The plug is to anchor to the plasterboard.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 3C - Has been used as it is considered there is no essential character and therefore it has been classified to last in numerical order within the tariff- namely the Steel screw. GIR 6 - has been used to classify the goods to subheading level 731814 - Threaded articles; Self-tapping screws. 8 digit code 73181499 - Other than of stainless steel; Other than spaced-thread screws. 10 digit …

  • UK 7318149990 Valable du 17 févr. 2025 au 16 févr. 2028 · Décision 600012142 sur GOV.UK

    The product is a steel threaded self-tapping screw, with an additional plastic plug for plasterboard. The head of the screw is flat with cross-recess. The length of the screw is 35mm with a thickness of 4.5mm. Packaged for retail sale.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 3C - Has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff- namely the Steel screw. GIR 6 - has been used to classify the goods to subheading level 731814 - Threaded articles; Self-tapping screws. 8 digit code 73181499 - Other than of stainless steel; Other than spaced-thread screws. 10 digit …

  • UK 7318153590 Valable du 8 janv. 2026 au 7 janv. 2029 · Décision 600014337 sur GOV.UK

    A stainless-steel stud and pin used in construction. A central peg is inserted into a central longitudinal channel of a headless, threaded shank and when struck into the channel with a hammer, it forces stainless-steel quadrants cut into the end of an anchor to splay out. A stainless- steel nut is then tightened on to the top of the shank to secure the stud in place. The studs, together with the pin and bolt are packaged in cardboard boxes.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - Has been used to identify the type of packaging. Carboard boxing GIR 6 - Has been used to classify the goods to subheading level 731815 - Other screws and bolts, whether or not with their nuts or washers 8 Digit Code 73181535 – other than elsewhere specified in this heading; without heads, of stainless steel 10 Digit Code 7318153590 – other than for use in certain types of …

  • UK 7318154890 Valable du 17 mai 2024 au 16 mai 2027 · Décision 600010475 sur GOV.UK

    Flange Jointing – Stud Bolts and Nuts Studding Material Alloy steel to ASTM A 193 Grade B7 with nuts to ASTM A 194 Grade 2H Standard Supply Stud Bolt coating PTFE over a metallic substrate to provide both good corrosion resistance and low friction characteristics. Packaged- Cardboard Box ; Wooden Crate

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading – 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level - 731815 – Threaded articles – other screws and bolts, whether or not with their nuts or washers 8 Digit code – 73181548 – Other, without heads - of 800 MPa or more 10 Digit code – 7318154890 – Other than for use in certain types of aircraft Also classified in …

  • UK 7318154890 Valable du 27 janv. 2026 au 26 janv. 2029 · Décision 600014339 sur GOV.UK

    A carbon-steel stud and pin used in construction. A central peg is inserted into a central longitudinal channel of a headless, threaded shank and when struck into the channel with a hammer, it forces carbon-steel quadrants cut into the end of an anchor to splay out. A carbon-steel nut is then tightened on to the top of the shank to secure the stud in place. The studs, together with the pin and bolt are packaged in cardboard boxes.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - Has been used to identify the type of packaging. Packaged in cardboard boxes GIR 6 - Has been used to classify the goods to subheading level 731815 - Other screws and bolts, whether or not with their nuts or washers 8 Digit Code 73181548 – other than elsewhere specified in this heading; without heads, other, with tensile strength of 800 mpa or more 10 Digit Code 7318154890 – other …

  • UK 7318157590 Valable du 18 juin 2026 au 17 juin 2029 · Décision 600015618 sur GOV.UK

    Super Duplex Stainless Steel Fasteners Bolts Various size bolts that are high strength stainless steel fasteners manufactured at material grade S32760 and designed for use in harsh, corrosive environments They are hot forged and head formed under high pressure followed by machining. Commonly used in offshore energy applications, such as securing parts for offshore wind projects. Supplied in boxes

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1- Has been used to classify this product by the terms of heading – 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and other similar articles, of iron and steel. GIR 6 - has been used to classify the goods to subheading level 731815 Threaded articles : Other screws and bolts, whether or not with their nuts or washers. 8 Digit Code – 73181575 Other than for fixing railway track construction material; With heads; Hexagonal heads; of Stainless Steel. 10 Digit Code – 7318157590 Other than for use in civil aircraft. Also classified in accordance with: …

  • UK 7318159589 Valable du 2 janv. 2025 au 1 janv. 2028 · Décision 600012053 sur GOV.UK

    Steel Lockbolt Pin and Collar The two part system comprises a pin with defined breakneck groove and a collar. Pin is inserted in the prepared hole and collar is placed over the locking grooves. Used as an secure vibration free locking fastener These can be used in securing car seats Manufactured from Steel using cold forging presses The pin goes through two pieces of material (metal) the collar is then slid over the pin and swaged into place making it fully secure and un moveable. It is packed in cardboard boxes for shipment.

    Justification

    For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading – 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and other similar articles, of iron and steel GIR 5 (b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 731815 – Other screws and bolts, whether or not with their nuts or washers Eight digit code – 73181595 Other than elsewhere specified in this heading Ten digit code – 7318159589 Other than for use in civil aircraft; Other than of stainless steel Also classified in accordance with: Chapter 83 Note 1 Section XV Note 2(a) Harmonised …

  • UK 7318159589 Valable du 3 juin 2025 au 2 juin 2028 · Décision 600013112 sur GOV.UK

    A Seat button/knob. Made from 90% plastic (acrylonitrile butadiene styrene) and 10% metal (steel). The button has plastic top for turning and pulling up/pushing down, the metal part making the connection. Pulling up and turning the knob allows the seat to be adjusted and pushing down locks the seat in place. Used as a replacement part for stationary bike (exercise bike).

    Justification

    For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and other similar articles, of iron and steel. GIR 6 has been used to classify the goods to subheading level 731815 - Threaded articles; other screws and bolts, whether or not with their nuts or washers. Eight digit code 73181595 - Other than for fixing railway track construction material specified in this heading; with heads; other than elsewhere specified. Ten digit code – 7318159589 Other than for use in civil aircraft; Other than of stainless steel. Also classified in accordance with: Section …

  • UK 7318159589 Valable du 20 juil. 2026 au 19 juil. 2029 · Décision 600015864 sur GOV.UK

    This product is a threaded bolt that is made from steel, is 10mm in diameter and has a 20mm flat head but no screw fixing. This bolt is used to hold two parts of a pulley unit together.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect –a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading – 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and other similar articles, of iron and steel. GIR 6 - Has been used to classify the goods to subheading level 731815 – Other screws and bolts, whether or not with their nuts or washers. 8 Digit Code – 73181595 Other than elsewhere specified in this heading. 10 Digit Code – 7318159589 Other than for use in civil aircraft; Other than of stainless steel. Also classified in accordance with: Section notes 3 to section XV. Harmonised …

  • UK 7318163990 Valable du 17 févr. 2026 au 16 févr. 2029 · Décision 600014972 sur GOV.UK

    A metal threaded nut. It is made from stainless steel castings 304/304L/316/316L, it is round in shape with grooves and is engraved. It is used to screw a connection union together in either a pipeline or into a machine. Normally packaged in boxes of 10.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7318: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) has been used to identify the type of packaging: Normally packaged in boxes of 10 GIR 6 has been used to classify the goods to subheading 731816: Threaded articles; Nuts 8 Digit Code: 73181639 - Of stainless steel; Other than blind rivet nuts 10 Digit Code: 7318163990 - Other than for use in certain types of aircraft Also classified in accordance with: Harmonized System Explanatory …

  • UK 7318163990 Valable du 18 juin 2026 au 17 juin 2029 · Décision 600015617 sur GOV.UK

    Super Duplex Stainless Steel Fasteners Nuts Various size nuts that are manufactured from S32760 high-strength stainless steel, these fasteners are designed for harsh, corrosive environments. They are formed hot or cold, with internal threads produced by tapping. Commonly used in offshore energy applications, such as securing parts for offshore wind projects. Supplied in boxes

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7318: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 5 (b) - Has been used to identify the type of packaging – Boxes. GIR 6 - Has been used to classify the goods to subheading 731816: Threaded articles; Nuts. 8 Digit Code 73181639 - Of stainless steel; Other than blind rivet nuts. 10 Digit Code 7318163990 - Other than for use in certain types of aircraft. Also classified in accordance with: Section Note XV Note 3. Harmonised System …

  • UK 7318169290 Valable du 20 juil. 2026 au 19 juil. 2029 · Décision 600015860 sur GOV.UK

    A threaded nut made from steel. It is used on a tensioner pulley bearing. It is a fastener that keeps the pulley on the bracket with its mating bolt.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect –a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 6 - Has been used to classify the goods to sub-heading 7318 16 – Nuts. 8 Digit Code - 73181692 Other than elsewhere specified in this subheading; with an inside diameter not exceeding 12mm. 10 Digit Code - 7318169290 Other than for use in certain types of aircraft. Also classified in accordance with: Section notes 3 to section XV. Harmonised System Explanatory Notes (HSEN) note (A) to Heading …

  • UK 7318169990 Valable du 27 oct. 2026 au 26 oct. 2029 · Décision 600016097 sur GOV.UK

    A tapered, internally threaded fastening nut made from non-stainless steel, designed for use within a locomotive flexible drive coupling assembly during wheelset changes. The article is supplied separately as a replacement fastener and is identified within the complete coupling assembly as the green taper sleeve. It has a cylindrical upper section, a wider tapered base and an M18 internal screw thread running throughout the entire bore. The article has no self-locking mechanism, bearing surface, sensor or other functional feature beyond fastening.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 6 - Has been used to classify the goods to subheading level. 731816 - threaded articles; nuts. 8-digit code 73181699 - other than of stainless steel; other, with an inside diameter exceeding 12mm. 10-digit code 7318169990 - other than for use in certain types of aircraft. Also classified in accordance with: Section XV Note 2 (a). Section XV Note 3. Section XVII Note 2(b). Harmonized …

  • UK 7318190090 Valable du 2 févr. 2026 au 1 févr. 2029 · Décision 600014681 sur GOV.UK

    Replacement M8 toggle for quick fit frames. Ideal for refurbishing frames where toggles have been damaged or lost. Attach metal sign faces quickly and easily with these toggle fittings. Made of Mild Steel and are used for Road Frame Signs Thread Size - M8 - 38mm thread length

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 7318 - screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 6 - has been used to classify the goods to subheading level - 731819 - threaded articles; other than elsewhere specified within this subheading 10 Digit code - 7318190090 - other than for use in certain types of aircraft Also classified in accordance with: Section Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to heading 7318

  • UK 7318220091 Valable du 27 nov. 2025 au 26 nov. 2028 · Décision 600013847 sur GOV.UK

    This product is pressed from Stainless Steel, and is used for packing to adjust the tail length of a clamp to meet differing beam flange thicknesses. The trader has confirmed it can be described as a clipped washer. It is not a spring washer or locked washer and is not for use with aircraft. Packaged into branded boxes in either 25 or 50 pieces per box depending on the size.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to subheading level 731822 - Other washers 10 Digit Code 7318220091 - other than for use in certain types of aircraft - of stainless steel Also classified in accordance with : Harmonised System Explanatory Notes (HSENs) to heading 7318 Note (E)

  • UK 7318220091 Valable du 18 juin 2026 au 17 juin 2029 · Décision 600015619 sur GOV.UK

    Super Duplex Stainless Steel Fasteners Washers These high-strength fasteners, made from S32760 stainless steel, are designed for harsh, corrosive environments. Stamped from plate or sheet metal, threads are cut, and components undergo heat treatment to restore corrosion resistance and duplex microstructure. Finishing steps include pickling and passivation. Each part is inspected for tensile strength, yield, and hardness. Used in the offshore energy industry to secure components. Supplied in boxes.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIRs): GIR 1 Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 5 (b) Has been used to identify normal packaging for transport -Boxes. GIR 6 Has been used to classify the goods to subheading level 731822 - Other washers. 10 Digit Code 7318220091 - other than for use in certain types of aircraft - of stainless steel. Also classified in accordance with: Section Note XV Note 3. Harmonised System Explanatory Notes (HSENs) note (E) to heading 7318.

  • UK 7318220098 Valable du 11 oct. 2024 au 10 oct. 2027 · Décision 600011259 sur GOV.UK

    Maintenance kit consisting of nylon D-Ring clip x 2, nylon insert lock nut that is made from nylon (polyamide, no metal is included) x 2, mild steel pozi drive pan head screw x 2, nylon insulation sleeve x 2, and mild steel flat washer x 4 which are not made in Malaysia. All placed in a clear plastic labelled bag. The kit is a field maintenance kit for this company's smoke sensitivity tester. This kit is just the parts in a plastic bag and then placed in a shipping carton. This ‘spares’ kit is merely a bunch of spare components that are commonly used on the main body/unit. The D clips are generic and all the components in the kit are not assembled together to form a new part.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7318: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 3C has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the Tariff GIR 5B - Has been used to identify the type of packaging; clear plastic labelled bag GIR 6 - Has been used to classify the goods to subheading level 731822: Non-threaded articles; Other washers 10 Digit code 7318220098: Other than for use in …

  • UK 7318220098 Valable du 20 juil. 2026 au 19 juil. 2029 · Décision 600015863 sur GOV.UK

    This product is a washer that is made from a mild steel plate and is used in a pulley unit between the nut and the surface.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect –a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 6 - Has been used to classify the goods to sub-heading – 731822 Other washers; Other than spring washers and other lock washers. 10 Digit Code – 7318220098 Other than consigned from Malaysia. Also classified in accordance with: Section notes 3 to section XV. Harmonised System Explanatory Notes (HSEN) note (E) to Heading 7318.

Source : HM Revenue & Customs, Advance Tariff Rulings. Contient des informations du secteur public sous licence Open Government Licence v3.0.

Restrictions et signalements pour 7318000000

  • CBAM : mécanisme d’ajustement carbone Règlement (UE) 2023/956, Annexe I 7318

    Secteur : fer et acier

    Lire l’acte sur EUR-Lex
  • Sanctions contre la Russie : interdiction d’importer Règlement (UE) n° 833/2014, Annexe XVII 7318

    Art. 3 octies, produits sidérurgiques

    Lire l’acte sur EUR-Lex
  • Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 7318

    Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie

    Lire l’acte sur EUR-Lex
  • Sanctions contre la Russie : interdiction d’exporter Règlement (UE) n° 833/2014, Annexe XXIII 7318

    Art. 3 duodecies, biens susceptibles de contribuer au renforcement des capacités industrielles de la Russie. seulement une partie du code : Vis, boulons, écrous, tire-fond, crochets à pas de vis, rivets, goupilles, chevilles, clavettes, ro...

    Lire l’acte sur EUR-Lex

À titre indicatif. Vérifiez l’acte avant de vous fier à un signalement ; les seuils, dérogations et exceptions ne sont pas tous indiqués.

TVA à l’importation dans l’UE

  • Allemagne 19 %
  • Autriche 20 %
  • Belgique 21 % éventuellement 6 %
  • Bulgarie 20 %
  • Chypre 19 %
  • Croatie 25 %
  • Danemark 25 %
  • Espagne 21 %
  • Estonie 24 %
  • Finlande 25,5 %
  • France 20 %
  • Grèce 24 %
  • Hongrie 27 %
  • Irlande 23 %
  • Italie 22 %
  • Lettonie 21 %
  • Lituanie 21 %
  • Luxembourg 17 %
  • Malte 18 %
  • Pays-Bas 21 %
  • Pologne 23 %
  • Portugal 23 %
  • Roumanie 21 %
  • Slovaquie 23 %
  • Slovénie 22 %
  • Suède 25 %
  • Tchéquie 21 %

Taux normal par État membre, sur la valeur en douane, les droits et le transport jusqu’à destination. Les taux réduits dépendent souvent de l’usage ou de l’acheteur et ne s’appliquent que si le pays les prévoit pour ces marchandises. Source : Commission européenne, Taxes in Europe Database, au 2 nov. 2026.

Règles d’origine

Les règles d’origine préférentielles de la sous-position 731800 dépendent de l’accord commercial. La Commission les publie dans Access2Markets.

Règles d’origine sur Access2Markets

Informations

Lorsque vous importez ou exportez "Vis, boulons, écrous, tire-fond, crochets à pas de vis, rivets, goupilles, clavettes, rondelles (y compris les rondelles destinées à faire ressort) et articles similaires, en fonte, fer ou acier", il est important d'avoir le bon code SH ou code TARIC. Le code HS 7318000000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.

Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Vis, boulons, écrous, tire-fond, crochets à pas de vis, rivets, goupilles, clavettes, rondelles (y compris les rondelles destinées à faire ressort) et articles similaires, en fonte, fer ou acier", veuillez noter les points suivants :

  1. Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Vis, boulons, écrous, tire-fond, crochets à pas de vis, rivets, goupilles, clavettes, rondelles (y compris les rondelles destinées à faire ressort) et articles similaires, en fonte, fer ou acier".
  2. Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Vis, boulons, écrous, tire-fond, crochets à pas de vis, rivets, goupilles, clavettes, rondelles (y compris les rondelles destinées à faire ressort) et articles similaires, en fonte, fer ou acier" dans le pays de destination ou l'exporter depuis le pays d'origine.
  3. Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
  4. Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
  5. Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.

En résumé, le code HS-Code ou le code TARIC pour "Vis, boulons, écrous, tire-fond, crochets à pas de vis, rivets, goupilles, clavettes, rondelles (y compris les rondelles destinées à faire ressort) et articles similaires, en fonte, fer ou acier" est 7318000000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Vis, boulons, écrous, tire-fond, crochets à pas de vis, rivets, goupilles, clavettes, rondelles (y compris les rondelles destinées à faire ressort) et articles similaires, en fonte, fer ou acier".

Structure du HS-Code

73
Chapitre
18
Titre
00
Sous-titre
00
CN sous-titre
00
TARIC sous-titre
80
Codes TARIC supplémentaires

1. Chapitre

Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 73 a été sélectionné pour ouvrages en fonte, fer ou acier

2. Titre

Le titre détermine la catégorie spécifique au sein d'un chapitre donné. Dans l'exemple ci-dessus, le 18 se réfère à Vis, boulons, écrous, tire-fond, crochets à pas de vis, rivets, goupilles, clavettes, rondelles (y compris les rondelles destinées à faire ressort) et articles similaires, en fonte, fer ou acier.

Arborescence HS-Code

7300000000 80

Chapitre OUVRAGES EN FONTE, FER OU ACIER

7318000000 80

Vis, boulons, écrous, tire-fond, crochets à pas de vis, rivets, goupilles, clavettes, rondelles (y compris les rondelles destinées à faire ressort) et articles similaires, en fonte, fer ou acier

7318110000 10

- Articles filetés

7318110000 80

- - Tire-fond

7318120000 80

- - autres vis à bois

7318121000 80

- - - en aciers inoxydables

7318121010 80

- - - - destinés à certains types de véhicules aériens

7318121090 80

- - - - autres

7318129000 80

- - - autres

7318129010 80

- - - - destinés à certains types de véhicules aériens

7318129090 80

- - - - autres

7318130000 80

- - Crochets et pitons à pas de vis

7318130010 80

- - - destinés à certains types de véhicules aériens

7318130090 80

- - - autres

7318140000 80

- - Vis autotaraudeuses

7318141000 80

- - - en aciers inoxydables

7318141010 80

- - - - destinés à certains types de véhicules aériens

7318141090 80

- - - - autres

7318149100 10

- - - autres

7318149100 80

- - - - Vis à tôles

7318149110 80

- - - - - destinés à certains types de véhicules aériens

7318149190 80

- - - - - autres

7318149900 80

- - - - autres

7318149910 80

- - - - - destinés à certains types de véhicules aériens

7318149990 80

- - - - - autres

7318150000 80

- - autres vis et boulons, même avec leurs écrous ou rondelles

7318152000 80

- - - pour la fixation des éléments de voies ferrées

7318153500 10

- - - autres

7318153500 20

- - - - sans tête

7318153500 80

- - - - - en aciers inoxydables

7318153510 80

- - - - - - destinés à certains types de véhicules aériens

7318153590 80

- - - - - - autres

7318154200 10

- - - - - autres, d'une résistance à la traction

7318154200 80

- - - - - - de moins de 800 MPa

7318154210 80

- - - - - - - destinés à certains types de véhicules aériens

7318154290 80

- - - - - - - autres

7318154800 80

- - - - - - de 800 MPa ou plus

7318154810 80

- - - - - - - destinés à certains types de véhicules aériens

7318154890 80

- - - - - - - autres

7318155200 10

- - - - avec tête

7318155200 20

- - - - - fendue ou à empreinte cruciforme

7318155200 80

- - - - - - en aciers inoxydables

7318155210 80

- - - - - - - destinés à certains types de véhicules aériens

7318155290 80

- - - - - - - autres

7318155800 80

- - - - - - autres

7318155810 80

- - - - - - - Boulons et écrous de blocage par simple vissage du type Hi-Lok

7318155860 10

- - - - - - - autres

7318155860 80

- - - - - - - - destinés à certains types de véhicules aériens

7318155890 80

- - - - - - - - autres

7318156200 10

- - - - - à six pans creux

7318156200 80

- - - - - - en aciers inoxydables

7318156210 80

- - - - - - - destinés à certains types de véhicules aériens

7318156290 80

- - - - - - - autres

7318156800 80

- - - - - - autres

7318156810 80

- - - - - - - Boulons et écrous de blocage par simple vissage du type Hi-Lok

7318156860 10

- - - - - - - autres

7318156860 80

- - - - - - - - destinés à certains types de véhicules aériens

7318156890 80

- - - - - - - - autres

7318157500 10

- - - - - hexagonale

7318157500 80

- - - - - - en aciers inoxydables

7318157510 80

- - - - - - - destinés à certains types de véhicules aériens

7318157590 80

- - - - - - - autres

7318158200 10

- - - - - - autres, d'une résistance à la traction

7318158200 80

- - - - - - - de moins de 800 MPa

7318158210 80

- - - - - - - - Boulons et écrous de blocage par simple vissage du type Hi-Lok

7318158260 10

- - - - - - - - autres

7318158260 80

- - - - - - - - - destinés à certains types de véhicules aériens

7318158290 80

- - - - - - - - - autres

7318158800 80

- - - - - - - de 800 MPa ou plus

7318158860 80

- - - - - - - - destinés à certains types de véhicules aériens

7318158880 80

- - - - - - - - autres

7318159500 80

- - - - - autres

7318159511 10

- - - - - - destinés à certains types de véhicules aériens

7318159511 80

- - - - - - - en aciers inoxydables

7318159519 80

- - - - - - - autres

7318159585 10

- - - - - - autres

7318159585 80

- - - - - - - en aciers inoxydables

7318159589 80

- - - - - - - autres

7318160000 80

- - Écrous

7318163100 10

- - - en aciers inoxydables

7318163100 80

- - - - Écrous à sertir

7318163110 80

- - - - - destinés à certains types de véhicules aériens

7318163190 80

- - - - - autres

7318163900 80

- - - - autres

7318163910 80

- - - - - destinés à certains types de véhicules aériens

7318163990 80

- - - - - autres

7318164000 10

- - - autres

7318164000 80

- - - - Écrous à sertir

7318164010 80

- - - - - destinés à certains types de véhicules aériens

7318164090 80

- - - - - autres

7318166000 80

- - - - de sécurité

7318166010 80

- - - - - destinés à certains types de véhicules aériens

7318166090 80

- - - - - autres

7318169200 10

- - - - autres, d'un diamètre intérieur

7318169200 80

- - - - - n'excédant pas 12 mm

7318169210 80

- - - - - - destinés à certains types de véhicules aériens

7318169290 80

- - - - - - autres

7318169900 80

- - - - - excédant 12 mm

7318169920 80

- - - - - - destinés à certains types de véhicules aériens

7318169990 80

- - - - - - autres

7318190000 80

- - autres

7318190020 80

- - - destinés à certains types de véhicules aériens

7318190090 80

- - - autres

7318210000 10

- Articles non filetés

7318210000 80

- - Rondelles destinées à faire ressort et autres rondelles de blocage

7318210021 10

- - - destinées à certains types de véhicules aériens

7318210021 80

- - - - en aciers inoxydables

7318210031 10

- - - - autres

7318210031 80

- - - - - en provenance de Malaisie

7318210039 80

- - - - - autres

7318210091 10

- - - autres

7318210091 80

- - - - en aciers inoxydables

7318210095 10

- - - - autres

7318210095 80

- - - - - en provenance de Malaisie

7318210098 80

- - - - - autres

7318220000 80

- - autres rondelles

7318220021 10

- - - destinées à certains types de véhicules aériens

7318220021 80

- - - - en aciers inoxydables

7318220039 80

- - - - autres

7318220091 10

- - - autres

7318220091 80

- - - - en aciers inoxydables

7318220098 80

- - - - autres

7318230000 80

- - Rivets

7318230020 80

- - - destinés à certains types de véhicules aériens

7318230090 80

- - - autres

7318240000 80

- - Goupilles et clavettes

7318240020 80

- - - destinées à certains types de véhicules aériens

7318240040 80

- - - Éléments de joint de retenue pour tubes et tuyaux: -en acier inoxydable selon la spécification 17-4PH ou en acier selon la spécification S7 pour l'acier à outils, -produit par moulage par injection de métal, -d'une dureté Rockwell de 38 HRC (± 1) ou 53 HRC (+ 2/- 1), -mesurant 7 mm x 4 mm x 5 mm ou plus, mais pas plus de 40 mm x 20 mm x 10 mm

7318240090 80

- - - autres

7318290000 80

- - autres

7318290020 80

- - - destinés à certains types de véhicules aériens

7318290090 80

- - - autres